Add initial DTS for Microchip ICICLE board having only
essential devices (clocks, sdhci, ethernet, serial, etc).
The device tree is based on the U-Boot patch.

https://patchwork.ozlabs.org/project/uboot/patch/20201110103414.10142-6-padmarao.begari@microchip.com/



Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Add YAML DT binding documentation for the Microchip PolarFire SoC.
It is documented at:

https://www.microsemi.com/products/fpga-soc/polarfire-soc-icicle-quick-start-guide



Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Add Microchip PolarFire kconfig option which selects SoC specific
and common drivers that is required for this SoC.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Introduce XIP (eXecute In Place) support for RISC-V platforms.
It allows code to be executed directly from non-volatile storage
directly addressable by the CPU, such as QSPI NOR flash which can
be found on many RISC-V platforms. This makes way for significant
optimization of RAM footprint. The XIP kernel is not compressed
since it has to run directly from flash, so it will occupy more
space on the non-volatile storage. The physical flash address used
to link the kernel object files and for storing it has to be known
at compile time and is represented by a Kconfig option.

XIP on RISC-V will for the time being only work on MMU-enabled
kernels.

Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
[Alex: Rebase on top of "Move kernel mapping outside the linear mapping" ]
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
[Palmer: disable XIP for allyesconfig]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

This patch allows Linux to act as a crash kernel for use with
kdump. Userspace will let the crash kernel know about the
memory region it can use through linux,usable-memory property
on the /memory node (overriding its reg property), and about the
memory region where the elf core header of the previous kernel
is saved, through a reserved-memory node with a compatible string
of "linux,elfcorehdr". This approach is the least invasive and
re-uses functionality already present.

I tested this on riscv64 qemu and it works as expected, you
may test it by retrieving the dmesg of the previous kernel
through /proc/vmcore, using the vmcore-dmesg utility from
kexec-tools.

Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

This patch adds support for kdump, the kernel will reserve a
region for the crash kernel and jump there on panic. In order
for userspace tools (kexec-tools) to prepare the crash kernel
kexec image, we also need to expose some information on
/proc/iomem for the memory regions used by the kernel and for
the region reserved for crash kernel. Note that on userspace
the device tree is used to determine the system's memory
layout so the "System RAM" on /proc/iomem is ignored.

I tested this on riscv64 qemu and works as expected, you may
test it by triggering a crash through /proc/sysrq_trigger:

echo c > /proc/sysrq_trigger

Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

The kernel region is always present and we know where it is, no need to
look for it inside the loop, just ignore it like the rest of the
reserved regions within system's memory.

Additionally, we don't need to call memblock_free inside the loop, as if
called it'll split the region of pre-allocated resources in two parts,
messing things up, just re-use the previous pre-allocated resource and
free any unused resources after both loops finish.

Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
[Palmer: commit text]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

This patch adds support for kexec on RISC-V. On SMP systems it depends
on HOTPLUG_CPU in order to be able to bring up all harts after kexec.
It also needs a recent OpenSBI version that supports the HSM extension.
I tested it on riscv64 QEMU on both an smp and a non-smp system.

Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Add RISC-V to the list of supported kexec architectures, we need to
add the definition early-on so that later patches can use it.

EM_RISCV is 243 as per ELF psABI specification here:
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md



Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Running "make" on an already compiled kernel tree will rebuild the
kernel even without any modifications:

  CALL    linux/scripts/checksyscalls.sh
  CALL    linux/scripts/atomic/check-atomics.sh
  CHK     include/generated/compile.h
  SO2S    arch/riscv/kernel/vdso/vdso-syms.S
  AS      arch/riscv/kernel/vdso/vdso-syms.o
  AR      arch/riscv/kernel/vdso/built-in.a
  AR      arch/riscv/kernel/built-in.a
  AR      arch/riscv/built-in.a
  GEN     .version
  CHK     include/generated/compile.h
  UPD     include/generated/compile.h
  CC      init/version.o
  AR      init/built-in.a
  LD      vmlinux.o

The reason is "Any target that utilizes if_changed must be listed in
$(targets), otherwise the command line check will fail, and the target
will always be built" as explained by Documentation/kbuild/makefiles.rst

Fix this build bug by adding vdso-syms.S to $(targets)

At the same time, there are two trivial clean up modifications:

- the vdso-dummy.o is not needed any more after so remove it.

- vdso.lds is a generated file, so it should be prefixed with
  $(obj)/ instead of $(src)/

Fixes: c2c81bb2

 ("RISC-V: Fix the VDSO symbol generaton for binutils-2.35+")
Cc: stable@vger.kernel.org
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

BUG_ON() uses unlikely in if(), which can be optimized at compile time.

Signed-off-by: zhouchuangao <zhouchuangao@vivo.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

The execution of sys_read end up hitting a BUG_ON() in __find_get_block
after installing kprobe at sys_read, the BUG message like the following:

[   65.708663] ------------[ cut here ]------------
[   65.709987] kernel BUG at fs/buffer.c:1251!
[   65.711283] Kernel BUG [#1]
[   65.712032] Modules linked in:
[   65.712925] CPU: 0 PID: 51 Comm: sh Not tainted 5.12.0-rc4 #1
[   65.714407] Hardware name: riscv-virtio,qemu (DT)
[   65.715696] epc : __find_get_block+0x218/0x2c8
[   65.716835]  ra : __getblk_gfp+0x1c/0x4a
[   65.717831] epc : ffffffe00019f11e ra : ffffffe00019f56a sp : ffffffe002437930
[   65.719553]  gp : ffffffe000f06030 tp : ffffffe0015abc00 t0 : ffffffe00191e038
[   65.721290]  t1 : ffffffe00191e038 t2 : 000000000000000a s0 : ffffffe002437960
[   65.723051]  s1 : ffffffe00160ad00 a0 : ffffffe00160ad00 a1 : 000000000000012a
[   65.724772]  a2 : 0000000000000400 a3 : 0000000000000008 a4 : 0000000000000040
[   65.726545]  a5 : 0000000000000000 a6 : ffffffe00191e000 a7 : 0000000000000000
[   65.728308]  s2 : 000000000000012a s3 : 0000000000000400 s4 : 0000000000000008
[   65.730049]  s5 : 000000000000006c s6 : ffffffe00240f800 s7 : ffffffe000f080a8
[   65.731802]  s8 : 0000000000000001 s9 : 000000000000012a s10: 0000000000000008
[   65.733516]  s11: 0000000000000008 t3 : 00000000000003ff t4 : 000000000000000f
[   65.734434]  t5 : 00000000000003ff t6 : 0000000000040000
[   65.734613] status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003
[   65.734901] Call Trace:
[   65.735076] [<ffffffe00019f11e>] __find_get_block+0x218/0x2c8
[   65.735417] [<ffffffe00020017a>] __ext4_get_inode_loc+0xb2/0x2f6
[   65.735618] [<ffffffe000201b6c>] ext4_get_inode_loc+0x3a/0x8a
[   65.735802] [<ffffffe000203380>] ext4_reserve_inode_write+0x2e/0x8c
[   65.735999] [<ffffffe00020357a>] __ext4_mark_inode_dirty+0x4c/0x18e
[   65.736208] [<ffffffe000206bb0>] ext4_dirty_inode+0x46/0x66
[   65.736387] [<ffffffe000192914>] __mark_inode_dirty+0x12c/0x3da
[   65.736576] [<ffffffe000180dd2>] touch_atime+0x146/0x150
[   65.736748] [<ffffffe00010d762>] filemap_read+0x234/0x246
[   65.736920] [<ffffffe00010d834>] generic_file_read_iter+0xc0/0x114
[   65.737114] [<ffffffe0001f5d7a>] ext4_file_read_iter+0x42/0xea
[   65.737310] [<ffffffe000163f2c>] new_sync_read+0xe2/0x15a
[   65.737483] [<ffffffe000165814>] vfs_read+0xca/0xf2
[   65.737641] [<ffffffe000165bae>] ksys_read+0x5e/0xc8
[   65.737816] [<ffffffe000165c26>] sys_read+0xe/0x16
[   65.737973] [<ffffffe000003972>] ret_from_syscall+0x0/0x2
[   65.738858] ---[ end trace fe93f985456c935d ]---

A simple reproducer looks like:
	echo 'p:myprobe sys_read fd=%a0 buf=%a1 count=%a2' > /sys/kernel/debug/tracing/kprobe_events
	echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable
	cat /sys/kernel/debug/tracing/trace

Here's what happens to hit that BUG_ON():

1) After installing kprobe at entry of sys_read, the first instruction
   is replaced by 'ebreak' instruction on riscv64 platform.

2) Once kernel reach the 'ebreak' instruction at the entry of sys_read,
   it trap into the riscv breakpoint handler, where it do something to
   setup for coming single-step of origin instruction, including backup
   the 'sstatus' in pt_regs, followed by disable interrupt during single
   stepping via clear 'SIE' bit of 'sstatus' in pt_regs.

3) Then kernel restore to the instruction slot contains two instructions,
   one is original instruction at entry of sys_read, the other is 'ebreak'.
   Here it trigger a 'Instruction page fault' exception (value at 'scause'
   is '0xc'), if PF is not filled into PageTabe for that slot yet.

4) Again kernel trap into page fault exception handler, where it choose
   different policy according to the state of running kprobe. Because
   afte 2) the state is KPROBE_HIT_SS, so kernel reset the current kprobe
   and 'pc' points back to the probe address.

5) Because 'epc' point back to 'ebreak' instrution at sys_read probe,
   kernel trap into breakpoint handler again, and repeat the operations
   at 2), however 'sstatus' without 'SIE' is keep at 4), it cause the
   real 'sstatus' saved at 2) is overwritten by the one withou 'SIE'.

6) When kernel cross the probe the 'sstatus' CSR restore with value
   without 'SIE', and reach __find_get_block where it requires the
   interrupt must be enabled.

Fix this is very trivial, just restore the value of 'sstatus' in pt_regs
with backup one at 2) when the instruction being single stepped cause a
page fault.

Fixes: c22b0bcb

 ("riscv: Add kprobes supported")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Now we can set ARCH_HAS_STRICT_MODULE_RWX for MMU riscv platforms, this
is good from security perspective.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

The core code manages the executable permissions of code regions of
modules explicitly, it is not necessary to create the module vmalloc
regions with RWX permissions. Create them with RW- permissions instead.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

We allocate Non-executable pages, then call bpf_jit_binary_lock_ro()
to enable executable permission after mapping them read-only. This is
to prepare for STRICT_MODULE_RWX in following patch.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

We will drop the executable permissions of the code pages from the
mapping at allocation time soon. Move bpf_jit_alloc_exec() and
bpf_jit_free_exec() to bpf_jit_core.c so that they can be shared by
both RV64I and RV32I.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Allocate PAGE_KERNEL_READ_EXEC(read only, executable) page for kprobes
insn page. This is to prepare for STRICT_MODULE_RWX.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Constify the sbi_ipi_ops so that it will be placed in the .rodata
section. This will cause attempts to modify it to fail when strict
page permissions are in place.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Constify the sys_call_table so that it will be placed in the .rodata
section. This will cause attempts to modify the table to fail when
strict page permissions are in place.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

All of these are never modified after init, so they can be
__ro_after_init.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

They are not needed after booting, so mark them as __init to move them
to the __init section.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

This is a preparatory patch for sv48 support that will introduce
dynamic PAGE_OFFSET.

Dynamic PAGE_OFFSET implies that all zones (vmalloc, vmemmap, fixaddr...)
whose addresses depend on PAGE_OFFSET become dynamic and can't be used
to statically initialize the array used by ptdump to identify the
different zones of the vm layout.

Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

This new document presents the RISC-V virtual memory layout and is based
one the x86 one: it describes the different limits of the different regions
of the virtual address space.

Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

This is a preparatory patch for relocatable kernel and sv48 support.

The kernel used to be linked at PAGE_OFFSET address therefore we could use
the linear mapping for the kernel mapping. But the relocated kernel base
address will be different from PAGE_OFFSET and since in the linear mapping,
two different virtual addresses cannot point to the same physical address,
the kernel mapping needs to lie outside the linear mapping so that we don't
have to copy it at the same physical offset.

The kernel mapping is moved to the last 2GB of the address space, BPF
is now always after the kernel and modules use the 2GB memory range right
before the kernel, so BPF and modules regions do not overlap. KASLR
implementation will simply have to move the kernel in the last 2GB range
and just take care of leaving enough space for BPF.

In addition, by moving the kernel to the end of the address space, both
sv39 and sv48 kernels will be exactly the same without needing to be
relocated at runtime.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
[Palmer: Squash the STRICT_RWX fix, and a !MMU fix]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Add riscv specific info dump in both handler_pre() and handler_post().

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

clang prior to 13.0.0 does not support -fpatchable-function-entry for
RISC-V.

clang: error: unsupported option '-fpatchable-function-entry=8' for target 'riscv64-unknown-linux-gnu'

To avoid this error, only select HAVE_DYNAMIC_FTRACE when this option is
not available.

Fixes: afc76b8b ("riscv: Using PATCHABLE_FUNCTION_ENTRY instead of MCOUNT")
Link: https://github.com/ClangBuiltLinux/linux/issues/1268


Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Prior to clang 13.0.0, the RISC-V name for the mcount symbol was
"mcount", which differs from the GCC version of "_mcount", which results
in the following errors:

riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_level':
main.c:(.text+0xe): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_start':
main.c:(.text+0x4e): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_finish':
main.c:(.text+0x92): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `.LBB32_28':
main.c:(.text+0x30c): undefined reference to `mcount'
riscv64-linux-gnu-ld: init/main.o: in function `free_initmem':
main.c:(.text+0x54c): undefined reference to `mcount'

This has been corrected in https://reviews.llvm.org/D98881 but the
minimum supported clang version is 10.0.1. To avoid build errors and to
gain a working function tracer, adjust the name of the mcount symbol for
older versions of clang in mount.S and recordmcount.pl.

Link: https://github.com/ClangBuiltLinux/linux/issues/1331


Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Clang can generate R_RISCV_CALL_PLT relocations to _mcount:

$ llvm-objdump -dr build/riscv/init/main.o | rg mcount
                000000000000000e:  R_RISCV_CALL_PLT     _mcount
                000000000000004e:  R_RISCV_CALL_PLT     _mcount

After this, the __start_mcount_loc section is properly generated and
function tracing still works.

Link: https://github.com/ClangBuiltLinux/linux/issues/1331


Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Currently, the VDSO is being linked through $(CC). This does not match
how the rest of the kernel links objects, which is through the $(LD)
variable.

When linking with clang, there are a couple of warnings about flags that
will not be used during the link:

clang-12: warning: argument unused during compilation: '-no-pie' [-Wunused-command-line-argument]
clang-12: warning: argument unused during compilation: '-pg' [-Wunused-command-line-argument]

'-no-pie' was added in commit 85602bea ("RISC-V: build vdso-dummy.o
with -no-pie") to override '-pie' getting added to the ld command from
distribution versions of GCC that enable PIE by default. It is
technically no longer needed after commit c2c81bb2 ("RISC-V: Fix the
VDSO symbol generaton for binutils-2.35+"), which removed vdso-dummy.o
in favor of generating vdso-syms.S from vdso.so with $(NM) but this also
resolves the issue in case it ever comes back due to having full control
over the $(LD) command. '-pg' is for function tracing, it is not used
during linking as clang states.

These flags could be removed/filtered to fix the warnings but it is
easier to just match the rest of the kernel and use $(LD) directly for
linking. See commits

  fe00e50b ("ARM: 8858/1: vdso: use $(LD) instead of $(CC) to link VDSO")
  691efbed ("arm64: vdso: use $(LD) instead of $(CC) to link VDSO")
  2ff90699 ("MIPS: VDSO: Use $(LD) instead of $(CC) to link VDSO")
  2b2a2584 ("s390/vdso: Use $(LD) instead of $(CC) to link vDSO")

for more information.

The flags are converted to linker flags and '--eh-frame-hdr' is added to
match what is added by GCC implicitly, which can be seen by adding '-v'
to GCC's invocation.

Additionally, since this area is being modified, use the $(OBJCOPY)
variable instead of an open coded $(CROSS_COMPILE)objcopy so that the
user's choice of objcopy binary is respected.

Link: https://github.com/ClangBuiltLinux/linux/issues/803
Link: https://github.com/ClangBuiltLinux/linux/issues/970


Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

For certain SiFive CPUs, "sfence.vma addr" cannot exactly flush addr
from TLB in the particular cases. The details could be found here:
https://sifive.cdn.prismic.io/sifive/167a1a56-03f4-4615-a79e-b2a86153148f_FU740_errata_20210205.pdf


In order to ensure the functionality, this patch uses the Alternative
scheme to replace all "sfence.vma addr" with "sfence.vma" at runtime.

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Add sign extension to the $badaddr before addressing the instruction page
fault and instruction access fault to workaround the issue "cip-453".

To avoid affecting the existing code sequence, this patch will creates two
trampolines to add sign extension to the $badaddr. By the "alternative"
mechanism, these two trampolines will replace the original exception
handler of instruction page fault and instruction access fault in the
excp_vect_table. In this case, only the specific SiFive CPU core jumps to
the do_page_fault and do_trap_insn_fault through these two trampolines.
Other CPUs are not affected.

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Add required ports of the Alternative scheme for SiFive.

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Introduce the "alternative" mechanism from ARM64 and x86 to apply the CPU
vendors' errata solution at runtime. The main purpose of this patch is
to provide a framework. Therefore, the implementation is quite basic for
now so that some scenarios could not use this schemei, such as patching
code to a module, relocating the patching code and heterogeneous CPU
topology.

Users could use the macro ALTERNATIVE to apply an errata to the existing
code flow. In the macro ALTERNATIVE, users need to specify the manufacturer
information(vendorid, archid, and impid) for this errata. Therefore, kernel
will know this errata is suitable for which CPU core. During the booting
procedure, kernel will select the errata required by the CPU core and then
patch it. It means that the kernel only applies the errata to the specified
CPU core. In this case, the vendor's errata does not affect each other at
runtime. The above patching procedure only occurs during the booting phase,
so we only take the overhead of the "alternative" mechanism once.

This "alternative" mechanism is enabled by default to ensure that all
required errata will be applied. However, users can disable this feature by
the Kconfig "CONFIG_RISCV_ERRATA_ALTERNATIVE".

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Add 3 wrapper functions to get vendor id, architecture id and implement id
from M-mode

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Make 'make tar-pkg' and 'tarbz2-pkg' work on riscv.

Signed-off-by: Carlos de Paula <me@carlosedp.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

When KASAN vmalloc region is populated, there is no userspace process and
the page table in use is swapper_pg_dir, so there is no need to read
SATP. Then we can use the same scheme used by kasan_populate_p*d
functions to go through the page table, which harmonizes the code.

In addition, make use of set_pgd that goes through all unused page table
levels, contrary to p*d_populate functions, which makes this function work
whatever the number of page table levels.

Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

The sbi_init() already prints SBI version before detecting
various SBI extensions so we don't need to print SBI version
for all detected SBI extensions.

Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

When percpu-timers are stopped by deep power saving mode, we
need system timer help to broadcast IPI_TIMER.

This is first introduced by broken x86 hardware, where the local apic
timer stops in C3 state. But many other architectures(powerpc, mips,
arm, hexagon, openrisc, sh) have supported the infrastructure to
deal with Power Management issues.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

FORTIFY_SOURCE could detect various overflows at compile and run time.
ARCH_HAS_FORTIFY_SOURCE means that the architecture can be built and
run with CONFIG_FORTIFY_SOURCE. Select it in RISCV.

See more about this feature from commit 6974f0c4


("include/linux/string.h: add the option of fortified string.h functions").

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

The riscv [rv32_]defconfig enabled CONFIG_MEMTEST,
but memtest feature is not supported in RISCV.

Add early_memtest() to support for memtest.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>