Add pin definition for I2S0 if used as a 2-channel only bus.

Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Enable the SoC thermal sensor on RK3399-Q7 (Puma).
As we want to do do a full board reset instead of just a SoC one, set
hw-tshut-mode to GPIO.

Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The roc-rk3328-cc is a credit card size single board computer using the
Rockchip RK3328 Quad-Core ARM Cortex A53 64-Bit Processor and supporting
up to 2GB 2133MHz LPDDR4 memory. It provides eMMC module socket, MicroSD
Card slot, USB 2.0/3.0, Gigabit Ethernet, HDMI/CVBS, Infrared Receiver,
SPDIF/I2S, and SPI/I2C/UART/PWM interfaces.

The devicetree currently supports basic peripherals.

Signed-off-by: Levin Du <djw@t-chip.com.cn>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

There are three pins can act as cif test clock for rk3399.
They're sourced from 24M and output 24M by default and some boards
may use them as camera 24M xvclk.

Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

except, again, POLLFREE and POLL_BUSY_LOOP.

With this, we finally get to the promised end result:

 - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any
   stray instances of ->poll() still using those will be caught by
   sparse.

 - eventpoll.c and select.c warning-free wrt __poll_t

 - no more kernel-side definitions of POLL... - userland ones are
   visible through the entire kernel (and used pretty much only for
   mangle/demangle)

 - same behavior as after the first series (i.e. sparc et.al. epoll(2)
   working correctly).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.

Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The commit 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT
usage") removed KASAN_SHADOW_SCALE_SHIFT definition from
include/linux/kasan.h and added it to architecture-specific headers,
except for xtensa. This broke the xtensa build with KASAN enabled.
Define KASAN_SHADOW_SCALE_SHIFT in arch/xtensa/include/asm/kasan.h

Reported by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 917538e2

 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage")
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>

Remove old, dead Kconfig option INET_LRO. It is gone since
commit 7bbf3cae

 ("ipv4: Remove inet_lro library").

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>

Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

and

Warning (unit_address_format): Node /XXX unit name should not have leading 0s

Converted using the following command:

find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} +

For simplicity, two sed expressions were used to solve each warnings separately.

To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:

https://elinux.org/Device_Tree_Linux#Linux_conventions

This is a follow up to commit 4c9847b7

 ("dt-bindings: Remove leading 0x from bindings notation")

Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>

59f47eff ("powerpc/pci: Use of_irq_parse_and_map_pci() helper")
replaced of_irq_parse_pci() + irq_create_of_mapping() with
of_irq_parse_and_map_pci(), but neglected to capture the virq
returned by irq_create_of_mapping(), so virq remained zero, which
caused INTx configuration to fail.

Save the virq value returned by of_irq_parse_and_map_pci() and correct
the virq declaration to match the of_irq_parse_and_map_pci() signature.

Fixes: 59f47eff

 "powerpc/pci: Use of_irq_parse_and_map_pci() helper"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch provides the MMIO load/store vector indexed
X-Form emulation.

Instructions implemented:
lvx: the quadword in storage addressed by the result of EA &
0xffff_ffff_ffff_fff0 is loaded into VRT.

stvx: the contents of VRS are stored into the quadword in storage
addressed by the result of EA & 0xffff_ffff_ffff_fff0.

Reported-by: Gopesh Kumar Chaudhary <gopchaud@in.ibm.com>
Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

We ended up with code that did a conditional branch inside a feature
section to code outside of the feature section. Depending on how the
object file gets organized, that might mean we exceed the 14bit
relocation limit for conditional branches:

  arch/powerpc/kvm/built-in.o:arch/powerpc/kvm/book3s_hv_rmhandlers.S:416:(__ftr_alt_97+0x8): relocation truncated to fit: R_PPC64_REL14 against `.text'+1ca4

So instead of doing a conditional branch outside of the feature section,
let's just jump at the end of the same, making the branch very short.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

This adds code to enable the HPT resizing code to work on POWER9,
which uses a slightly modified HPT entry format compared to POWER8.
On POWER9, we convert HPTEs read from the HPT from the new format to
the old format so that the rest of the HPT resizing code can work as
before.  HPTEs written to the new HPT are converted to the new format
as the last step before writing them into the new HPT.

This takes out the checks added by commit bcd3bb63

 ("KVM: PPC:
Book3S HV: Disable HPT resizing on POWER9 for now", 2017-02-18),
now that HPT resizing works on POWER9.

On POWER9, when we pivot to the new HPT, we now call
kvmppc_setup_partition_table() to update the partition table in order
to make the hardware use the new HPT.

[paulus@ozlabs.org - added kvmppc_setup_partition_table() call,
 wrote commit message.]

Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

This fixes the computation of the HPTE index to use when the HPT
resizing code encounters a bolted HPTE which is stored in its
secondary HPTE group.  The code inverts the HPTE group number, which
is correct, but doesn't then mask it with new_hash_mask.  As a result,
new_pteg will be effectively negative, resulting in new_hptep
pointing before the new HPT, which will corrupt memory.

In addition, this removes two BUG_ON statements.  The condition that
the BUG_ONs were testing -- that we have computed the hash value
incorrectly -- has never been observed in testing, and if it did
occur, would only affect the guest, not the host.  Given that
BUG_ON should only be used in conditions where the kernel (i.e.
the host kernel, in this case) can't possibly continue execution,
it is not appropriate here.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

Commit 0fbc0b67

 ("cris: remove arch specific early DT functions")
was a bit overzealous in removing the CRIS DT handling,
and the complete contents of the Makefile was erased
instead of just the line for the devicetree file.

This lead to a complete link failure for all SoCs in
the CRIS port due to missing symbols.

Restore the contents except the line for the devicetree file.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Fixes: 0fbc0b67

Commit 82616f95 ("xen: remove tests for pvh mode in pure pv paths")
removed the check for autotranslation from {set,clear}_foreign_p2m_mapping
but those are called by grant-table.c also on PVH/HVM guests.

Cc: <stable@vger.kernel.org> # 4.14
Fixes: 82616f95

 ("xen: remove tests for pvh mode in pure pv paths")
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

The ARCH_WANTS_PROT_NUMA_PROT_NONE symbol was removed by
commit 6a33979d ("mm: remove misleading ARCH_USES_NUMA_PROT_NONE"),
but S390 still selects it.

Remove the ARCH_WANTS_PROT_NUMA_PROT_NONE select from the S390 symbol.

Discovered with the
https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py


script.

Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Commit 76d837a4 ("KVM: PPC: Book3S PR: Don't include SPAPR TCE code
on non-pseries platforms") added a reference to the globally undefined
symbol PPC_SERIES. Looking at the rest of the commit, PPC_PSERIES was
probably intended.

Change PPC_SERIES to PPC_PSERIES.

Discovered with the
https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py
script.

Fixes: 76d837a4

 ("KVM: PPC: Book3S PR: Don't include SPAPR TCE code on non-pseries platforms")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

Add CONFIG_EXPOLINE to enable the use of the new -mindirect-branch= and
-mfunction_return= compiler options to create a kernel fortified against
the specte v2 attack.

With CONFIG_EXPOLINE=y all indirect branches will be issued with an
execute type instruction. For z10 or newer the EXRL instruction will
be used, for older machines the EX instruction. The typical indirect
call

	basr	%r14,%r1

is replaced with a PC relative call to a new thunk

	brasl	%r14,__s390x_indirect_jump_r1

The thunk contains the EXRL/EX instruction to the indirect branch

__s390x_indirect_jump_r1:
	exrl	0,0f
	j	.
0:	br	%r1

The detour via the execute type instruction has a performance impact.
To get rid of the detour the new kernel parameter "nospectre_v2" and
"spectre_v2=[on,off,auto]" can be used. If the parameter is specified
the kernel and module code will be patched at runtime.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The declaration for swsusp_arch_resume() marks it as 'asmlinkage',
but the definition in x86-32 does not, and it fails to include
the header with the declaration.  This leads to a warning when
building with link-time-optimizations:

kernel/power/power.h:108:23: error: type of 'swsusp_arch_resume' does not match original declaration [-Werror=lto-type-mismatch]
 extern asmlinkage int swsusp_arch_resume(void);
                       ^
arch/x86/power/hibernate_32.c:148:0: note: 'swsusp_arch_resume' was previously declared here
 int swsusp_arch_resume(void)

This moves the declaration into a globally visible header file
and fixes up both x86 definitions to match it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

SPCR is currently only enabled or ARM64 and x86 can use SPCR to setup
an early console.

General fixes include updating Documentation & Kconfig (for x86),
updating comments, and changing parse_spcr() to acpi_parse_spcr(),
and earlycon_init_is_deferred to earlycon_acpi_spcr_enable to be
more descriptive.

On x86, many systems have a valid SPCR table but the table version is
not 2 so the table version check must be a warning.

On ARM64 when the kernel parameter earlycon is used both the early console
and console are enabled.  On x86, only the earlycon should be enabled by
by default.  Modify acpi_parse_spcr() to allow options for initializing
the early console and console separately.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mark Salter <msalter@redhat.com>
Tested-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Some data were printed into a sequence by two separate function calls.
Print the same data by a single function call instead.

This issue was detected by using the Coccinelle software.

Link: http://lkml.kernel.org/r/ddcfff3a-9502-6ce0-b08a-365eb55ce958@users.sourceforge.net


Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are several functions that do find_task_by_vpid() followed by
get_task_struct().  We can use a helper function instead.

Link: http://lkml.kernel.org/r/1509602027-11337-1-git-send-email-rppt@linux.vnet.ibm.com


Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We've measured that we spend ~0.6% of sys cpu time in cpumask_next_and().
It's essentially a joined iteration in search for a non-zero bit, which is
currently implemented as a lookup join (find a nonzero bit on the lhs,
lookup the rhs to see if it's set there).

Implement a direct join (find a nonzero bit on the incrementally built
join).  Also add generic bitmap benchmarks in the new `test_find_bit`
module for new function (see `find_next_and_bit` in [2] and [3] below).

For cpumask_next_and, direct benchmarking shows that it's 1.17x to 14x
faster with a geometric mean of 2.1 on 32 CPUs [1].  No impact on memory
usage.  Note that on Arm, the new pure-C implementation still outperforms
the old one that uses a mix of C and asm (`find_next_bit`) [3].

[1] Approximate benchmark code:

```
  unsigned long src1p[nr_cpumask_longs] = {pattern1};
  unsigned long src2p[nr_cpumask_longs] = {pattern2};
  for (/*a bunch of repetitions*/) {
    for (int n = -1; n <= nr_cpu_ids; ++n) {
      asm volatile("" : "+rm"(src1p)); // prevent any optimization
      asm volatile("" : "+rm"(src2p));
      unsigned long result = cpumask_next_and(n, src1p, src2p);
      asm volatile("" : "+rm"(result));
    }
  }
```

Results:
pattern1    pattern2     time_before/time_after
0x0000ffff  0x0000ffff   1.65
0x0000ffff  0x00005555   2.24
0x0000ffff  0x00001111   2.94
0x0000ffff  0x00000000   14.0
0x00005555  0x0000ffff   1.67
0x00005555  0x00005555   1.71
0x00005555  0x00001111   1.90
0x00005555  0x00000000   6.58
0x00001111  0x0000ffff   1.46
0x00001111  0x00005555   1.49
0x00001111  0x00001111   1.45
0x00001111  0x00000000   3.10
0x00000000  0x0000ffff   1.18
0x00000000  0x00005555   1.18
0x00000000  0x00001111   1.17
0x00000000  0x00000000   1.25
-----------------------------
               geo.mean  2.06

[2] test_find_next_bit, X86 (skylake)

 [ 3913.477422] Start testing find_bit() with random-filled bitmap
 [ 3913.477847] find_next_bit: 160868 cycles, 16484 iterations
 [ 3913.477933] find_next_zero_bit: 169542 cycles, 16285 iterations
 [ 3913.478036] find_last_bit: 201638 cycles, 16483 iterations
 [ 3913.480214] find_first_bit: 4353244 cycles, 16484 iterations
 [ 3913.480216] Start testing find_next_and_bit() with random-filled
 bitmap
 [ 3913.481074] find_next_and_bit: 89604 cycles, 8216 iterations
 [ 3913.481075] Start testing find_bit() with sparse bitmap
 [ 3913.481078] find_next_bit: 2536 cycles, 66 iterations
 [ 3913.481252] find_next_zero_bit: 344404 cycles, 32703 iterations
 [ 3913.481255] find_last_bit: 2006 cycles, 66 iterations
 [ 3913.481265] find_first_bit: 17488 cycles, 66 iterations
 [ 3913.481266] Start testing find_next_and_bit() with sparse bitmap
 [ 3913.481272] find_next_and_bit: 764 cycles, 1 iterations

[3] test_find_next_bit, arm (v7 odroid XU3).

[  267.206928] Start testing find_bit() with random-filled bitmap
[  267.214752] find_next_bit: 4474 cycles, 16419 iterations
[  267.221850] find_next_zero_bit: 5976 cycles, 16350 iterations
[  267.229294] find_last_bit: 4209 cycles, 16419 iterations
[  267.279131] find_first_bit: 1032991 cycles, 16420 iterations
[  267.286265] Start testing find_next_and_bit() with random-filled
bitmap
[  267.302386] find_next_and_bit: 2290 cycles, 8140 iterations
[  267.309422] Start testing find_bit() with sparse bitmap
[  267.316054] find_next_bit: 191 cycles, 66 iterations
[  267.322726] find_next_zero_bit: 8758 cycles, 32703 iterations
[  267.329803] find_last_bit: 84 cycles, 66 iterations
[  267.336169] find_first_bit: 4118 cycles, 66 iterations
[  267.342627] Start testing find_next_and_bit() with sparse bitmap
[  267.356919] find_next_and_bit: 91 cycles, 1 iterations

[courbet@google.com: v6]
  Link: http://lkml.kernel.org/r/20171129095715.23430-1-courbet@google.com
[geert@linux-m68k.org: m68k/bitops: always include <asm-generic/bitops/find.h>]
  Link: http://lkml.kernel.org/r/1512556816-28627-1-git-send-email-geert@linux-m68k.org
Link: http://lkml.kernel.org/r/20171128131334.23491-1-courbet@google.com


Signed-off-by: Clement Courbet <courbet@google.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

with bitmap_{from,to}_arr32 over the kernel. Additionally to it:
* __check_eq_bitmap() now takes single nbits argument.
* __check_eq_u32_array is not used in new test but may be used in
  future. So I don't remove it here, but annotate as __used.

Tested on arm64 and 32-bit BE mips.

[arnd@arndb.de: perf: arm_dsu_pmu: convert to bitmap_from_arr32]
  Link: http://lkml.kernel.org/r/20180201172508.5739-2-ynorov@caviumnetworks.com
[ynorov@caviumnetworks.com: fix net/core/ethtool.c]
  Link: http://lkml.kernel.org/r/20180205071747.4ekxtsbgxkj5b2fz@yury-thinkpad
Link: http://lkml.kernel.org/r/20171228150019.27953-2-ynorov@caviumnetworks.com


Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: David Decotigny <decot@googlers.com>,
Cc: David S. Miller <davem@davemloft.net>,
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Nearly all modern compilers support a stack-protector option, and nearly
all modern distributions enable the kernel stack-protector, so enabling
this by default in kernel builds would make sense.  However, Kconfig does
not have knowledge of available compiler features, so it isn't safe to
force on, as this would unconditionally break builds for the compilers or
architectures that don't have support.  Instead, this introduces a new
option, CONFIG_CC_STACKPROTECTOR_AUTO, which attempts to discover the best
possible stack-protector available, and will allow builds to proceed even
if the compiler doesn't support any stack-protector.

This option is made the default so that kernels built with modern
compilers will be protected-by-default against stack buffer overflows,
avoiding things like the recent BlueBorne attack.  Selection of a specific
stack-protector option remains available, including disabling it.

Additionally, tiny.config is adjusted to use CC_STACKPROTECTOR_NONE, since
that's the option with the least code size (and it used to be the default,
so we have to explicitly choose it there now).

Link: http://lkml.kernel.org/r/1510076320-69931-4-git-send-email-keescook@chromium.org


Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Various portions of the kernel, especially per-architecture pieces,
need to know if the compiler is building with the stack protector.
This was done in the arch/Kconfig with 'select', but this doesn't
allow a way to do auto-detected compiler support. In preparation for
creating an on-if-available default, move the logic for the definition of
CONFIG_CC_STACKPROTECTOR into the Makefile.

Link: http://lkml.kernel.org/r/1510076320-69931-3-git-send-email-keescook@chromium.org


Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Right now the fact that KASAN uses a single shadow byte for 8 bytes of
memory is scattered all over the code.

This change defines KASAN_SHADOW_SCALE_SHIFT early in asm include files
and makes use of this constant where necessary.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/34937ca3b90736eaad91b568edf5684091f662e3.1515775666.git.andreyknvl@google.com


Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that we've standardised on SMCCC v1.1 to perform the branch
prediction invalidation, let's drop the previous band-aid.
If vendors haven't updated their firmware to do SMCCC 1.1, they
haven't updated PSCI either, so we don't loose anything.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Add the detection and runtime code for ARM_SMCCC_ARCH_WORKAROUND_1.
It is lovely. Really.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

We want SMCCC_ARCH_WORKAROUND_1 to be fast. As fast as possible.
So let's intercept it as early as we can by testing for the
function call number as soon as we've identified a HVC call
coming from the guest.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

A new feature of SMCCC 1.1 is that it offers firmware-based CPU
workarounds. In particular, SMCCC_ARCH_WORKAROUND_1 provides
BP hardening for CVE-2017-5715.

If the host has some mitigation for this issue, report that
we deal with it using SMCCC_ARCH_WORKAROUND_1, as we apply the
host workaround on every guest exit.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

We're about to need kvm_psci_version in HYP too. So let's turn it
into a static inline, and pass the kvm structure as a second
parameter (so that HYP can do a kern_hyp_va on it).

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The new SMC Calling Convention (v1.1) allows for a reduced overhead
when calling into the firmware, and provides a new feature discovery
mechanism.

Make it visible to KVM guests.

Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

As we're about to update the PSCI support, and because I'm lazy,
let's move the PSCI include file to include/kvm so that both
ARM architectures can find it.

Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

When handling an SMC trap, the "preferred return address" is set
to that of the SMC, and not the next PC (which is a departure from
the behaviour of an SMC that isn't trapped).

Increment PC in the handler, as the guest is otherwise forever
stuck...

Cc: stable@vger.kernel.org
Fixes: acfb3b88

 ("arm64: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls")
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

KVM doesn't follow the SMCCC when it comes to unimplemented calls,
and inject an UNDEF instead of returning an error. Since firmware
calls are now used for security mitigation, they are becoming more
common, and the undef is counter productive.

Instead, let's follow the SMCCC which states that -1 must be returned
to the caller when getting an unknown function number.

Cc: <stable@vger.kernel.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

KVM doesn't follow the SMCCC when it comes to unimplemented calls,
and inject an UNDEF instead of returning an error. Since firmware
calls are now used for security mitigation, they are becoming more
common, and the undef is counter productive.

Instead, let's follow the SMCCC which states that -1 must be returned
to the caller when getting an unknown function number.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

It is possible to take an IRQ from EL0 following a branch to a kernel
address in such a way that the IRQ is prioritised over the instruction
abort. Whilst an attacker would need to get the stars to align here,
it might be sufficient with enough calibration so perform BP hardening
in the rare case that we see a kernel address in the ELR when handling
an IRQ from EL0.

Reported-by: Dan Hettena <dhettena@nvidia.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>