I haven't been active for 18 months, and don't have the hardware set up
to test KVM for MIPS, so mark it as orphaned and remove myself as
maintainer. Hopefully somebody from MIPS can pick this up.

Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvmarm-fixes-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master

KVM/arm fixes for .5.5, take #1

- Fix uninitialised sysreg accessor
- Fix handling of demand-paged device mappings
- Stop spamming the console on IMPDEF sysregs
- Relax mappings of writable memslots
- Assorted cleanups

The host reports support for the synthetic feature X86_FEATURE_SSBD
when any of the three following hardware features are set:
  CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31]
  CPUID.80000008H:EBX.AMD_SSBD[bit 24]
  CPUID.80000008H:EBX.VIRT_SSBD[bit 25]

Either of the first two hardware features implies the existence of the
IA32_SPEC_CTRL MSR, but CPUID.80000008H:EBX.VIRT_SSBD[bit 25] does
not. Therefore, CPUID.80000008H:EBX.AMD_SSBD[bit 24] should only be
set in the guest if CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] or
CPUID.80000008H:EBX.AMD_SSBD[bit 24] is set on the host.

Fixes: 4c6903a0 ("KVM: x86: fix reporting of AMD speculation bug CPUID leaf")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The host reports support for the synthetic feature X86_FEATURE_SSBD
when any of the three following hardware features are set:
  CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31]
  CPUID.80000008H:EBX.AMD_SSBD[bit 24]
  CPUID.80000008H:EBX.VIRT_SSBD[bit 25]

Either of the first two hardware features implies the existence of the
IA32_SPEC_CTRL MSR, but CPUID.80000008H:EBX.VIRT_SSBD[bit 25] does
not. Therefore, CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] should only be
set in the guest if CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] or
CPUID.80000008H:EBX.AMD_SSBD[bit 24] is set on the host.

Fixes: 0c54914d ("KVM: x86: use Intel speculation bugs and features as derived in generic x86 code")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

A device mapping is normally always mapped at Stage-2, since there
is very little gain in having it faulted in.

Nonetheless, it is possible to end-up in a situation where the device
mapping has been removed from Stage-2 (userspace munmaped the VFIO
region, and the MMU notifier did its job), but present in a userspace
mapping (userpace has mapped it back at the same address). In such
a situation, the device mapping will be demand-paged as the guest
performs memory accesses.

This requires to be careful when dealing with mapping size, cache
management, and to handle potential execution of a device mapping.

Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191211165651.7889-2-maz@kernel.org

Commit 4b927b94 ("KVM: arm/arm64: vgic: Introduce find_reg_by_id()")
introduced 'find_reg_by_id()', which looks up a system register only if
the 'id' index parameter identifies a valid system register. As part of
the patch, existing callers of 'find_reg()' were ported over to the new
interface, but this breaks 'index_to_sys_reg_desc()' in the case that the
initial lookup in the vCPU target table fails because we will then call
into 'find_reg()' for the system register table with an uninitialised
'param' as the key to the lookup.

GCC 10 is bright enough to spot this (amongst a tonne of false positives,
but hey!):

  | arch/arm64/kvm/sys_regs.c: In function ‘index_to_sys_reg_desc.part.0.isra’:
  | arch/arm64/kvm/sys_regs.c:983:33: warning: ‘params.Op2’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  |   983 |   (u32)(x)->CRn, (u32)(x)->CRm, (u32)(x)->Op2);
  | [...]

Revert the hunk of 4b927b94 which breaks 'index_to_sys_reg_desc()' so
that the old behaviour of checking the index upfront is restored.

Fixes: 4b927b94 ("KVM: arm/arm64: vgic: Introduce find_reg_by_id()")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191212094049.12437-1-will@kernel.org

In kvm_arch_prepare_memory_region, arm kvm regards the memory region as
writable if the flag has no KVM_MEM_READONLY, and the vm is readonly if
!VM_WRITE.

But there is common usage for setting kvm memory region as follows:
e.g. qemu side (see the PROT_NONE flag)
1. mmap(NULL, size, PROT_NONE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
   memory_region_init_ram_ptr()
2. re mmap the above area with read/write authority.

Such example is used in virtio-fs qemu codes which hasn't been upstreamed
[1]. But seems we can't forbid this example.

Without this patch, it will cause an EPERM during kvm_set_memory_region()
and cause qemu boot crash.

As told by Ard, "the underlying assumption is incorrect, i.e., that the
value of vm_flags at this point in time defines how the VMA is used
during its lifetime. There may be other cases where a VMA is created
with VM_READ vm_flags that are changed to VM_READ|VM_WRITE later, and
we are currently rejecting this use case as well."

[1] https://gitlab.com/virtio-fs/qemu/blob/5a356e/hw/virtio/vhost-user-fs.c#L488



Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Link: https://lore.kernel.org/r/20191206020802.196108-1-justin.he@arm.com

We don't intend to support IMPLEMENATION DEFINED system registers, but
have to trap them (and emulate them as UNDEFINED). These traps aren't
interesting to the system administrator or to the KVM developers, so
let's not bother logging when we do so.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191205180652.18671-3-mark.rutland@arm.com

Currently kvm_pr_unimpl() is ratelimited, so print_sys_reg_instr() won't
spam the console. However, someof its callers try to print some
contextual information with kvm_err(), which is not ratelimited. This
means that in some cases the context may be printed without the sysreg
encoding, which isn't all that useful.

Let's ensure that both are consistently printed together and
ratelimited, by refactoring print_sys_reg_instr() so that some callers
can provide it with an arbitrary format string.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191205180652.18671-2-mark.rutland@arm.com

Use wrapper function lock_all_vcpus()/unlock_all_vcpus()
in kvm_vgic_create() to remove duplicated code dealing
with locking and unlocking all vcpus in a vm.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/1575081918-11401-1-git-send-email-linmiaohe@huawei.com

In kvm_vgic_dist_init() called from kvm_vgic_map_resources(), if
dist->vgic_model is invalid, dist->spis will be freed without set
dist->spis = NULL. And in vgicv2 resources clean up path,
__kvm_vgic_destroy() will be called to free allocated resources.
And dist->spis will be freed again in clean up chain because we
forget to set dist->spis = NULL in kvm_vgic_dist_init() failed
path. So double free would happen.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/1574923128-19956-1-git-send-email-linmiaohe@huawei.com

As arg dummy is not really needed, there's no need to pass
NULL when calling cpu_init_hyp_mode(). So clean it up.

Fixes: 67f69197 ("arm64: kvm: allows kvm cpu hotplug")
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1574320559-5662-1-git-send-email-linmiaohe@huawei.com

If X86_FEATURE_RTM is disabled, the guest should not be able to access
MSR_IA32_TSX_CTRL.  We can therefore use it in KVM to force all
transactions from the guest to abort.

Tested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The current guest mitigation of TAA is both too heavy and not really
sufficient.  It is too heavy because it will cause some affected CPUs
(those that have MDS_NO but lack TAA_NO) to fall back to VERW and
get the corresponding slowdown.  It is not really sufficient because
it will cause the MDS_NO bit to disappear upon microcode update, so
that VMs started before the microcode update will not be runnable
anymore afterwards, even with tsx=on.

Instead, if tsx=on on the host, we can emulate MSR_IA32_TSX_CTRL for
the guest and let it run without the VERW mitigation.  Even though
MSR_IA32_TSX_CTRL is quite heavyweight, and we do not want to write
it on every vmentry, we can use the shared MSR functionality because
the host kernel need not protect itself from TSX-based side-channels.

Tested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Because KVM always emulates CPUID, the CPUID clear bit
(bit 1) of MSR_IA32_TSX_CTRL must be emulated "manually"
by the hypervisor when performing said emulation.

Right now neither kvm-intel.ko nor kvm-amd.ko implement
MSR_IA32_TSX_CTRL but this will change in the next patch.

Reviewed-by: Jim Mattson <jmattson@google.com>
Tested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

"Shared MSRs" are guest MSRs that are written to the host MSRs but
keep their value until the next return to userspace.  They support
a mask, so that some bits keep the host value, but this mask is
only used to skip an unnecessary MSR write and the value written
to the MSR is always the guest MSR.

Fix this and, while at it, do not update smsr->values[slot].curr if
for whatever reason the wrmsr fails.  This should only happen due to
reserved bits, so the value written to smsr->values[slot].curr
will not match when the user-return notifier and the host value will
always be restored.  However, it is untidy and in rare cases this
can actually avoid spurious WRMSRs on return to userspace.

Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Tested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM does not implement MSR_IA32_TSX_CTRL, so it must not be presented
to the guests.  It is also confusing to have !ARCH_CAP_TSX_CTRL_MSR &&
!RTM && ARCH_CAP_TAA_NO: lack of MSR_IA32_TSX_CTRL suggests TSX was not
hidden (it actually was), yet the value says that TSX is not vulnerable
to microarchitectural data sampling.  Fix both.

Cc: stable@vger.kernel.org
Tested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add a comment explaining the rational behind having both
no_compat open and ioctl callbacks to fend off compat tasks.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Acquire the per-VM slots_lock when zapping all shadow pages as part of
toggling nx_huge_pages.  The fast zap algorithm relies on exclusivity
(via slots_lock) to identify obsolete vs. valid shadow pages, because it
uses a single bit for its generation number. Holding slots_lock also
obviates the need to acquire a read lock on the VM's srcu.

Failing to take slots_lock when toggling nx_huge_pages allows multiple
instances of kvm_mmu_zap_all_fast() to run concurrently, as the other
user, KVM_SET_USER_MEMORY_REGION, does not take the global kvm_lock.
(kvm_mmu_zap_all_fast() does take kvm->mmu_lock, but it can be
temporarily dropped by kvm_zap_obsolete_pages(), so it is not enough
to enforce exclusivity).

Concurrent fast zap instances causes obsolete shadow pages to be
incorrectly identified as valid due to the single bit generation number
wrapping, which results in stale shadow pages being left in KVM's MMU
and leads to all sorts of undesirable behavior.
The bug is easily confirmed by running with CONFIG_PROVE_LOCKING and
toggling nx_huge_pages via its module param.

Note, until commit 4ae5acbc4936 ("KVM: x86/mmu: Take slots_lock when
using kvm_mmu_zap_all_fast()", 2019-11-13) the fast zap algorithm used
an ulong-sized generation instead of relying on exclusivity for
correctness, but all callers except the recently added set_nx_huge_pages()
needed to hold slots_lock anyways.  Therefore, this patch does not have
to be backported to stable kernels.

Given that toggling nx_huge_pages is by no means a fast path, force it
to conform to the current approach instead of reintroducing the previous
generation count.

Fixes: b8e8c830 ("kvm: mmu: ITLB_MULTIHIT mitigation", but NOT FOR STABLE)
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

On a system without KVM_COMPAT, we prevent IOCTLs from being issued
by a compat task. Although this prevents most silly things from
happening, it can still confuse a 32bit userspace that is able
to open the kvm device (the qemu test suite seems to be pretty
mad with this behaviour).

Take a more radical approach and return a -ENODEV to the compat
task.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

When applying commit 7a5ee6ed ("KVM: X86: Fix initialization of MSR
lists"), it forgot to reset the three MSR lists number varialbes to 0
while removing the useless conditionals.

Fixes: 7a5ee6ed (KVM: X86: Fix initialization of MSR lists)
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Glibc-2.30 gained gettid() wrapper, selftests fail to compile:

lib/assert.c:58:14: error: static declaration of ‘gettid’ follows non-static declaration
   58 | static pid_t gettid(void)
      |              ^~~~~~
In file included from /usr/include/unistd.h:1170,
                 from include/test_util.h:18,
                 from lib/assert.c:10:
/usr/include/bits/unistd_ext.h:34:16: note: previous declaration of ‘gettid’ was here
   34 | extern __pid_t gettid (void) __THROW;
      |                ^~~~~~

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

If a huge page is recovered (and becomes no executable) while another
thread is executing it, the resulting contention on mmu_lock can cause
latency spikes.  Disabling recovery for PREEMPT_RT kernels fixes this
issue.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull kvm fixes from Paolo Bonzini:
 "Fix unwinding of KVM_CREATE_VM failure, VT-d posted interrupts,
  DAX/ZONE_DEVICE, and module unload/reload"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: MMU: Do not treat ZONE_DEVICE pages as being reserved
  KVM: VMX: Introduce pi_is_pir_empty() helper
  KVM: VMX: Do not change PID.NDST when loading a blocked vCPU
  KVM: VMX: Consider PID.PIR to determine if vCPU has pending interrupts
  KVM: VMX: Fix comment to specify PID.ON instead of PIR.ON
  KVM: X86: Fix initialization of MSR lists
  KVM: fix placement of refcount initialization
  KVM: Fix NULL-ptr deref after kvm_create_vm fails

Pull x86 TSX Async Abort and iTLB Multihit mitigations from Thomas Gleixner:
 "The performance deterioration departement is not proud at all of
  presenting the seventh installment of speculation mitigations and
  hardware misfeature workarounds:

   1) TSX Async Abort (TAA) - 'The Annoying Affair'

      TAA is a hardware vulnerability that allows unprivileged
      speculative access to data which is available in various CPU
      internal buffers by using asynchronous aborts within an Intel TSX
      transactional region.

      The mitigation depends on a microcode update providing a new MSR
      which allows to disable TSX in the CPU. CPUs which have no
      microcode update can be mitigated by disabling TSX in the BIOS if
      the BIOS provides a tunable.

      Newer CPUs will have a bit set which indicates that the CPU is not
      vulnerable, but the MSR to disable TSX will be available
      nevertheless...

Explicitly exempt ZONE_DEVICE pages from kvm_is_reserved_pfn() and
instead manually handle ZONE_DEVICE on a case-by-case basis.  For things
like page refcounts, KVM needs to treat ZONE_DEVICE pages like normal
pages, e.g. put pages grabbed via gup().  But for flows such as setting
A/D bits or shifting refcounts for transparent huge pages, KVM needs to
to avoid processing ZONE_DEVICE pages as the flows in question lack the
underlying machinery for proper handling of ZONE_DEVICE pages.

This fixes a hang reported by Adam Borowski[*] in dev_pagemap_cleanup()
when running a KVM guest backed with /dev/dax memory, as KVM straight up
doesn't put any references to ZONE_DEVICE pages acquired by gup().

Note, Dan Williams proposed an alternative solution of doing put_page()
on ZONE_DEVICE pages immediately after gup() in order to simplify the
auditing needed to ensure is_zone_device_page() is called if and only if
the backing device is pinned (via gup()).  But that approach would break
kvm_vcpu_{un}map() as KVM requires the page to be pinned from map() 'til
unmap() when accessing guest memory, unlike KVM's secondary MMU, which
coordinates with mmu_notifier invalidations to avoid creating stale
page references, i.e. doesn't rely on pages being pinned.

[*] http://lkml.kernel.org/r/20190919115547.GA17963@angband.pl



Reported-by: Adam Borowski <kilobyte@angband.pl>
Analyzed-by: David Hildenbrand <david@redhat.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org
Fixes: 3565fce3 ("mm, x86: get_user_pages() for dax mappings")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Streamline the PID.PIR check and change its call sites to use
the newly added helper.

Suggested-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

When vCPU enters block phase, pi_pre_block() inserts vCPU to a per pCPU
linked list of all vCPUs that are blocked on this pCPU. Afterwards, it
changes PID.NV to POSTED_INTR_WAKEUP_VECTOR which its handler
(wakeup_handler()) is responsible to kick (unblock) any vCPU on that
linked list that now has pending posted interrupts.

While vCPU is blocked (in kvm_vcpu_block()), it may be preempted which
will cause vmx_vcpu_pi_put() to set PID.SN.  If later the vCPU will be
scheduled to run on a different pCPU, vmx_vcpu_pi_load() will clear
PID.SN but will also *overwrite PID.NDST to this different pCPU*.
Instead of keeping it with original pCPU which vCPU had entered block
phase on.

This results in an issue because when a posted interrupt is delivered, as
the wakeup_handler() will be executed and fail to find blocked vCPU on
its per pCPU linked list of all vCPUs that are blocked on this pCPU.
Which is due to the vCPU being placed on a *different* per pCPU
linked list i.e. the original pCPU in which it entered block phase.

The regression is introduced by commit c112b5f5 ("KVM: x86:
Recompute PID.ON when clearing PID.SN"). Therefore, partially revert
it and reintroduce the condition in vmx_vcpu_pi_load() responsible for
avoiding changing PID.NDST when loading a blocked vCPU.

Fixes: c112b5f5 ("KVM: x86: Recompute PID.ON when clearing PID.SN")
Tested-by: Nathan Ni <nathan.ni@oracle.com>
Co-developed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Commit 17e433b5 ("KVM: Fix leak vCPU's VMCS value into other pCPU")
introduced vmx_dy_apicv_has_pending_interrupt() in order to determine
if a vCPU have a pending posted interrupt. This routine is used by
kvm_vcpu_on_spin() when searching for a a new runnable vCPU to schedule
on pCPU instead of a vCPU doing busy loop.

vmx_dy_apicv_has_pending_interrupt() determines if a
vCPU has a pending posted interrupt solely based on PID.ON. However,
when a vCPU is preempted, vmx_vcpu_pi_put() sets PID.SN which cause
raised posted interrupts to only set bit in PID.PIR without setting
PID.ON (and without sending notification vector), as depicted in VT-d
manual section 5.2.3 "Interrupt-Posting Hardware Operation".

Therefore, checking PID.ON is insufficient to determine if a vCPU has
pending posted interrupts and instead we should also check if there is
some bit set on PID.PIR if PID.SN=1.

Fixes: 17e433b5 ("KVM: Fix leak vCPU's VMCS value into other pCPU")
Reviewed-by: Jagannathan Raman <jag.raman@oracle.com>
Co-developed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The Outstanding Notification (ON) bit is part of the Posted Interrupt
Descriptor (PID) as opposed to the Posted Interrupts Register (PIR).
The latter is a bitmap for pending vectors.

Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The three MSR lists(msrs_to_save[], emulated_msrs[] and
msr_based_features[]) are global arrays of kvm.ko, which are
adjusted (copy supported MSRs forward to override the unsupported MSRs)
when insmod kvm-{intel,amd}.ko, but it doesn't reset these three arrays
to their initial value when rmmod kvm-{intel,amd}.ko. Thus, at the next
installation, kvm-{intel,amd}.ko will do operations on the modified
arrays with some MSRs lost and some MSRs duplicated.

So define three constant arrays to hold the initial MSR lists and
initialize msrs_to_save[], emulated_msrs[] and msr_based_features[]
based on the constant arrays.

Cc: stable@vger.kernel.org
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
[Remove now useless conditionals. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This fixes two different classes of bugs in the Intel graphics hardware:

MMIO register read hang:
 "On Intels Gen8 and Gen9 Graphics hardware, a read of specific graphics
  MMIO registers when the product is in certain low power states causes
  a system hang.

  There are two potential triggers for DoS:
    a) H/W corruption of the RC6 save/restore vector
    b) Hard hang within the MIPI hardware

  This prevents the DoS in two areas of the hardware:
    1) Detect corruption of RC6 address on exit from low-power state,
       and if we find it corrupted, disable RC6 and RPM
    2) Permanently lower the MIPI MMIO timeout"

Blitter command streamer unrestricted memory accesses:
 "On Intels Gen9 Graphics hardware the Blitter Command Streamer (BCS)
  allows writing to Memory Mapped Input Output (MMIO) that should be
  blocked. With modifications of page tables, this can lead to privilege
  escalation. This exposure is limited to the Guest Physical Address
  space and does not allow for access outside of the graphics virtual
  machine.

  This series establishes a software parser into the Blitter command
  stream to scan for, and prevent, reads or writes to MMIO's that should
  not be accessible to non-privileged contexts.

  Much of the command parser infrastructure has existed for some time,
  and is used on Ivybridge/Haswell/Valleyview derived products to allow
  the use of features normally blocked by hardware. In this legacy
  context, the command parser is employed to allow normally unprivileged
  submissions to be run with elevated privileges in order to grant
  access to a limited set of extra capabilities. In this mode the parser
  is optional; In the event that the parser finds any construct that it
  cannot properly validate (e.g. nested command buffers), it simply
  aborts the scan and submits the buffer in non-privileged mode.

  For Gen9 Graphics, this series makes the parser mandatory for all
  Blitter submissions. The incoming user buffer is first copied to a
  kernel owned buffer, and parsed. If all checks are successful the
  kernel owned buffer is mapped READ-ONLY and submitted on behalf of the
  user. If any checks fail, or the parser is unable to complete the scan
  (nested buffers), it is forcibly rejected. The successfully scanned
  buffer is executed with NORMAL user privileges (key difference from
  legacy usage).

  Modern usermode does not use the Blitter on later hardware, having
  switched over to using the 3D engine instead for performance reasons.
  There are however some legacy usermode apps that rely on Blitter,
  notably the SNA X-Server. There are no known usermode applications
  that require nested command buffers on the Blitter, so the forcible
  rejection of such buffers in this patch series is considered an
  acceptable limitation"

* Intel graphics fixes in emailed bundle from Jon Bloomfield <jon.bloomfield@intel.com>:
  drm/i915/cmdparser: Fix jump whitelist clearing
  drm/i915/gen8+: Add RC6 CTX corruption WA
  drm/i915: Lower RM timeout to avoid DSI hard hangs
  drm/i915/cmdparser: Ignore Length operands during command matching
  drm/i915/cmdparser: Add support for backward jumps
  drm/i915/cmdparser: Use explicit goto for error paths
  drm/i915: Add gen9 BCS cmdparsing
  drm/i915: Allow parsing of unsized batches
  drm/i915: Support ro ppgtt mapped cmdparser shadow buffers
  drm/i915: Add support for mandatory cmdparsing
  drm/i915: Remove Master tables from cmdparser
  drm/i915: Disable Secure Batches for gen6+
  drm/i915: Rename gen7 cmdparser tables

Pull cgroup fix from Tejun Heo:
 "There's an inadvertent preemption point in ptrace_stop() which was
  reliably triggering for a test scenario significantly slowing it down.

  This contains Oleg's fix to remove the unwanted preemption point"

* 'for-5.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: freezer: call cgroup_enter_frozen() with preemption disabled in ptrace_stop()

Pull SCSI fixes from James Bottomley:
 "Three small changes: two in the core and one in the qla2xxx driver.

  The sg_tablesize fix affects a thinko in the migration to blk-mq of
  certain legacy drivers which could cause an oops and the sd core
  change should only affect zoned block devices which were wrongly
  suppressing error messages for reset all zones"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: core: Handle drivers which set sg_tablesize to zero
  scsi: qla2xxx: fix NPIV tear down process
  scsi: sd_zbc: Fix sd_zbc_complete()

When a jump_whitelist bitmap is reused, it needs to be cleared.
Currently this is done with memset() and the size calculation assumes
bitmaps are made of 32-bit words, not longs.  So on 64-bit
architectures, only the first half of the bitmap is cleared.

If some whitelist bits are carried over between successive batches
submitted on the same context, this will presumably allow embedding
the rogue instructions that we're trying to reject.

Use bitmap_zero() instead, which gets the calculation right.

Fixes: f8c08d8f ("drm/i915/cmdparser: Add support for backward jumps")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>

Reported by syzkaller:

   =============================
   WARNING: suspicious RCU usage
   -----------------------------
   ./include/linux/kvm_host.h:536 suspicious rcu_dereference_check() usage!

   other info that might help us debug this:

   rcu_scheduler_active = 2, debug_locks = 1
   no locks held by repro_11/12688.

   stack backtrace:
   Call Trace:
    dump_stack+0x7d/0xc5
    lockdep_rcu_suspicious+0x123/0x170
    kvm_dev_ioctl+0x9a9/0x1260 [kvm]
    do_vfs_ioctl+0x1a1/0xfb0
    ksys_ioctl+0x6d/0x80
    __x64_sys_ioctl+0x73/0xb0
    do_syscall_64+0x108/0xaa0
    entry_SYSCALL_64_after_hwframe+0x49/0xbe

Commit a97b0e77 (kvm: call kvm_arch_destroy_vm if vm creation fails)
sets users_count to 1 before kvm_arch_init_vm(), however, if kvm_arch_init_vm()
fails, we need to decrease this count.  By moving it earlier, we can push
the decrease to out_err_no_arch_destroy_vm without introducing yet another
error label.

syzkaller source: https://syzkaller.appspot.com/x/repro.c?x=15209b84e00000



Reported-by:  <syzbot+75475908cd0910f141ee@syzkaller.appspotmail.com>
Fixes: a97b0e77 ("kvm: call kvm_arch_destroy_vm if vm creation fails")
Cc: Jim Mattson <jmattson@google.com>
Analyzed-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Reported by syzkaller:

    kasan: CONFIG_KASAN_INLINE enabled
    kasan: GPF could be caused by NULL-ptr deref or user memory access
    general protection fault: 0000 [#1] PREEMPT SMP KASAN
    CPU: 0 PID: 14727 Comm: syz-executor.3 Not tainted 5.4.0-rc4+ #0
    RIP: 0010:kvm_coalesced_mmio_init+0x5d/0x110 arch/x86/kvm/../../../virt/kvm/coalesced_mmio.c:121
    Call Trace:
     kvm_dev_ioctl_create_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:3446 [inline]
     kvm_dev_ioctl+0x781/0x1490 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3494
     vfs_ioctl fs/ioctl.c:46 [inline]
     file_ioctl fs/ioctl.c:509 [inline]
     do_vfs_ioctl+0x196/0x1150 fs/ioctl.c:696
     ksys_ioctl+0x62/0x90 fs/ioctl.c:713
     __do_sys_ioctl fs/ioctl.c:720 [inline]
     __se_sys_ioctl fs/ioctl.c:718 [inline]
     __x64_sys_ioctl+0x6e/0xb0 fs/ioctl.c:718
     do_syscall_64+0xca/0x5d0 arch/x86/entry/common.c:290
     entry_SYSCALL_64_after_hwframe+0x49/0xbe

Commit 9121923c ("kvm: Allocate memslots and buses before calling kvm_arch_init_vm")
moves memslots and buses allocations around, however, if kvm->srcu/irq_srcu fails
initialization, NULL will be returned instead of error code, NULL will not be intercepted
in kvm_dev_ioctl_create_vm() and be dereferenced by kvm_coalesced_mmio_init(), this patch
fixes it.

Moving the initialization is required anyway to avoid an incorrect synchronize_srcu that
was also reported by syzkaller:

 wait_for_completion+0x29c/0x440 kernel/sched/completion.c:136
 __synchronize_srcu+0x197/0x250 kernel/rcu/srcutree.c:921
 synchronize_srcu_expedited kernel/rcu/srcutree.c:946 [inline]
 synchronize_srcu+0x239/0x3e8 kernel/rcu/srcutree.c:997
 kvm_page_track_unregister_notifier+0xe7/0x130 arch/x86/kvm/page_track.c:212
 kvm_mmu_uninit_vm+0x1e/0x30 arch/x86/kvm/mmu.c:5828
 kvm_arch_destroy_vm+0x4a2/0x5f0 arch/x86/kvm/x86.c:9579
 kvm_create_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:702 [inline]

so do it.

Reported-by:  <syzbot+89a8060879fa0bd2db4f@syzkaller.appspotmail.com>
Reported-by:  <syzbot+e27e7027eb2b80e44225@syzkaller.appspotmail.com>
Fixes: 9121923c ("kvm: Allocate memslots and buses before calling kvm_arch_init_vm")
Cc: Jim Mattson <jmattson@google.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull ARM SoC fixes from Olof Johansson:
 "A set of fixes that have trickled in over the last couple of weeks:

   - MAINTAINER update for Cavium/Marvell ThunderX2

   - stm32 tweaks to pinmux for Joystick/Camera, and RAM allocation for
     CAN interfaces

   - i.MX fixes for voltage regulator GPIO mappings, fixes voltage
     scaling issues

   - More i.MX fixes for various issues on i.MX eval boards: interrupt
     storm due to u-boot leaving pins in new states, fixing power button
     config, a couple of compatible-string corrections.

   - Powerdown and Suspend/Resume fixes for Allwinner A83-based tablets

   - A few documentation tweaks and a fix of a memory leak in the reset
     subsystem"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: update Cavium ThunderX2 maintainers
  ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1
  ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1
  ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157c
  ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
  arm64: dts: zii-ultra: fix ARM regulator GPIO handle
  ARM: sunxi: Fix CPU powerdown on A83T
  ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend
  arm64: dts: imx8mn: fix compatible string for sdma
  arm64: dts: imx8mm: fix compatible string for sdma
  reset: fix reset_control_ops kerneldoc comment
  ARM: dts: imx6-logicpd: Re-enable SNVS power key
  soc: imx: gpc: fix initialiser format
  ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts
  arm64: dts: ls1028a: fix a compatible issue
  reset: fix reset_control_get_exclusive kerneldoc comment
  reset: fix reset_control_lookup kerneldoc comment
  reset: fix of_reset_control_get_count kerneldoc comment
  reset: fix of_reset_simple_xlate kerneldoc comment
  reset: Fix memory leak in reset_control_array_put()

Pull IIO fixes and staging driver from Greg KH:
 "Here is a mix of a number of IIO driver fixes for 5.4-rc7, and a whole
  new staging driver.

  The IIO fixes resolve some reported issues, all are tiny.

  The staging driver addition is the vboxsf filesystem, which is the
  VirtualBox guest shared folder code. Hans has been trying to get
  filesystem reviewers to review the code for many months now, and
  Christoph finally said to just merge it in staging now as it is
  stand-alone and the filesystem people can review it easier over time
  that way.

  I know it's late for this big of an addition, but it is stand-alone.

  The code has been in linux-next for a while, long enough to pick up a
  few tiny fixes for it already so people are looking at it.

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: Fix error return code in vboxsf_fill_super()
  staging: vboxsf: fix dereference of pointer dentry before it is null checked
  staging: vboxsf: Remove unused including <linux/version.h>
  staging: Add VirtualBox guest shared folder (vboxsf) support
  iio: adc: stm32-adc: fix stopping dma
  iio: imu: inv_mpu6050: fix no data on MPU6050
  iio: srf04: fix wrong limitation in distance measuring
  iio: imu: adis16480: make sure provided frequency is positive