Since the sysfs attribute hangs off the RMI bus, which doesn't go away during
firmware flash, it needs to be explicitly removed, otherwise we would try and
register the same attribute twice.

This reverts commit 36a44af5.

Signed-off-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The newer trackpoints from ALPS, Elan and NXP implement a very limited
subset of extended commands and controls that the original trackpoints
implemented, so we should not be exposing not working controls in sysfs.
The newer trackpoints also do not implement "Power On Reset" or "Read
Extended Button Status", so we should not be using these commands during
initialization.

While we are at it, let's change "unsigned char" to u8 for byte data or
bool for booleans and use better suited error codes instead of -1.

Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Lenovo introduced trackpoint compatible sticks with minimum PS/2 commands.
They supposed to reply with 0x02, 0x03, or 0x04 in response to the
"Read Extended ID" command, so we would know not to try certain extended
commands. Unfortunately even some trackpoints reporting the original IBM
version (0x01 firmware 0x0e) now respond with incorrect data to the "Get
Extended Buttons" command:

 thinkpad_acpi: ThinkPad BIOS R0DET87W (1.87 ), EC unknown
 thinkpad_acpi: Lenovo ThinkPad E470, model 20H1004SGE

 psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 0/0

Since there are no trackpoints without buttons, let's assume the trackpoint
has 3 buttons when we get 0 response to the extended buttons query.

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196253


Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Adds support for the current lineup of Xbox One controllers from PDP
(Performance Designed Products). These controllers are very picky with
their initialization sequence and require an additional 2 packets before
they send any input reports.

Signed-off-by: Mark Furneaux <mark@furneaux.ca>
Reviewed-by: Cameron Gutman <aicommander@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Replace the original license statement with the SPDX identifier.

Update also the copyright owner adding myself as co-owner of the
copyright.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

KASAN found a UAF due to dangling pointer. As the report below says,
rmi_f11_attention() accesses drvdata->attn_data.data, which was freed in
rmi_irq_fn.

[  311.424062] BUG: KASAN: use-after-free in rmi_f11_attention+0x526/0x5e0 [rmi_core]
[  311.424067] Read of size 27 at addr ffff88041fd610db by task irq/131-i2c_hid/1162
[  311.424075] CPU: 0 PID: 1162 Comm: irq/131-i2c_hid Not tainted 4.15.0-rc8+ #2
[  311.424076] Hardware name: Razer Blade Stealth/Razer, BIOS 6.05 01/26/2017
[  311.424078] Call Trace:
[  311.424086]  dump_stack+0xae/0x12d
[  311.424090]  ? _atomic_dec_and_lock+0x103/0x103
[  311.424094]  ? show_regs_print_info+0xa/0xa
[  311.424099]  ? input_handle_event+0x10b/0x810
[  311.424104]  print_address_description+0x65/0x229
[  311.424108]  kasan_report.cold.5+0xa7/0x281
[  311.424117]  rmi_f11_attention+0x526/0x5e0 [rmi_core]
[  311.424123]  ? memcpy+0x1f/0x50
[  311.424132]  ? rmi_f11_attention+0x526/0x5e0 [rmi_core]
[  311.424143]  ? rmi_f11_probe+0x1e20/0x1e20 [rmi_core]
[  311.424153]  ? rmi_process_interrupt_requests+0x220/0x2a0 [rmi_core]
[  311.424163]  ? rmi_irq_fn+0x22c/0x270 [rmi_core]
[  311.424173]  ? rmi_process_interrupt_requests+0x2a0/0x2a0 [rmi_core]
[  311.424177]  ? free_irq+0xa0/0xa0
[  311.424180]  ? irq_finalize_oneshot.part.39+0xeb/0x180
[  311.424190]  ? rmi_process_interrupt_requests+0x2a0/0x2a0 [rmi_core]
[  311.424193]  ? irq_thread_fn+0x3d/0x80
[  311.424197]  ? irq_finalize_oneshot.part.39+0x180/0x180
[  311.424200]  ? irq_thread+0x21d/0x290
[  311.424203]  ? irq_thread_check_affinity+0x170/0x170
[  311.424207]  ? remove_wait_queue+0x150/0x150
[  311.424212]  ? kasan_unpoison_shadow+0x30/0x40
[  311.424214]  ? __init_waitqueue_head+0xa0/0xd0
[  311.424218]  ? task_non_contending.cold.55+0x18/0x18
[  311.424221]  ? irq_forced_thread_fn+0xa0/0xa0
[  311.424226]  ? irq_thread_check_affinity+0x170/0x170
[  311.424230]  ? kthread+0x19e/0x1c0
[  311.424233]  ? kthread_create_worker_on_cpu+0xc0/0xc0
[  311.424237]  ? ret_from_fork+0x32/0x40

[  311.424244] Allocated by task 899:
[  311.424249]  kasan_kmalloc+0xbf/0xe0
[  311.424252]  __kmalloc_track_caller+0xd9/0x1f0
[  311.424255]  kmemdup+0x17/0x40
[  311.424264]  rmi_set_attn_data+0xa4/0x1b0 [rmi_core]
[  311.424269]  rmi_raw_event+0x10b/0x1f0 [hid_rmi]
[  311.424278]  hid_input_report+0x1a8/0x2c0 [hid]
[  311.424283]  i2c_hid_irq+0x146/0x1d0 [i2c_hid]
[  311.424286]  irq_thread_fn+0x3d/0x80
[  311.424288]  irq_thread+0x21d/0x290
[  311.424291]  kthread+0x19e/0x1c0
[  311.424293]  ret_from_fork+0x32/0x40

[  311.424296] Freed by task 1162:
[  311.424300]  kasan_slab_free+0x71/0xc0
[  311.424303]  kfree+0x90/0x190
[  311.424311]  rmi_irq_fn+0x1b2/0x270 [rmi_core]
[  311.424319]  rmi_irq_fn+0x257/0x270 [rmi_core]
[  311.424322]  irq_thread_fn+0x3d/0x80
[  311.424324]  irq_thread+0x21d/0x290
[  311.424327]  kthread+0x19e/0x1c0
[  311.424330]  ret_from_fork+0x32/0x40

[  311.424334] The buggy address belongs to the object at ffff88041fd610c0 which belongs to the cache kmalloc-64 of size 64
[  311.424340] The buggy address is located 27 bytes inside of 64-byte region [ffff88041fd610c0, ffff88041fd61100)
[  311.424344] The buggy address belongs to the page:
[  311.424348] page:ffffea00107f5840 count:1 mapcount:0 mapping: (null) index:0x0
[  311.424353] flags: 0x17ffffc0000100(slab)
[  311.424358] raw: 0017ffffc0000100 0000000000000000 0000000000000000 00000001802a002a
[  311.424363] raw: dead000000000100 dead000000000200 ffff8804228036c0 0000000000000000
[  311.424366] page dumped because: kasan: bad access detected

[  311.424369] Memory state around the buggy address:
[  311.424373]  ffff88041fd60f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  311.424377]  ffff88041fd61000: fb fb fb fb fb fb fb fb fc fc fc fc fb fb fb fb
[  311.424381] >ffff88041fd61080: fb fb fb fb fc fc fc fc fb fb fb fb fb fb fb fb
[  311.424384]                                                     ^
[  311.424387]  ffff88041fd61100: fc fc fc fc fb fb fb fb fb fb fb fb fc fc fc fc
[  311.424391]  ffff88041fd61180: fb fb fb fb fb fb fb fb fc fc fc fc fb fb fb fb

Cc: stable@vger.kernel.org
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The fix for handling two-finger scroll (i4a646580f793 - "Input: ALPS -
fix two-finger scroll breakage in right side on ALPS touchpad")
introduced a minor "typo" that broke decoding of multi-touch events are
decoded on some ALPS touchpads.  For example, tapping with three-fingers
can no longer be used to emulate middle-mouse-button (the kernel doesn't
recognize this as the proper event, and doesn't report it correctly to
userspace).  This affects touchpads that use SS4 "plus" protocol
variant, like those found on Dell E7270 & E7470 laptops (tested on
E7270).

First, probably the code in alps_decode_ss4_v2() for case
SS4_PACKET_ID_MULTI used inconsistent indices to "f->mt[]". You can see
0 & 1 are used for the "if" part but 2 & 3 are used for the "else" part.

Second, in the previous patch, new macros were introduced to decode X
coordinates specific to the SS4 "plus" variant, but the macro to
define the maximum X value wasn't changed accordingly. The macros to
decode X values for "plus" variant are effectively shifted right by 1
bit, but the max wasn't shifted too. This causes the driver to
incorrectly handle "no data" cases, which also interfered with how
multi-touch was handled.

Fixes: 4a646580 ("Input: ALPS - fix two-finger scroll breakage...")
Signed-off-by: Nir Perry <nirperry@gmail.com>
Reviewed-by: Masaki Ota <masaki.ota@jp.alps.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The tpouchpad/trackpoint on Lenovo Thinkpad T460p work with smbus/RMI.

Signed-off-by: Zhenjie Wang <zhenjie.wang@sjtu.edu.cn>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The lack of the MODULE_LICENSE tag can lead to a warning here:

WARNING: modpost: missing MODULE_LICENSE() in drivers/input/touchscreen/of_touchscreen.o

I'm adding a license and description tag, but no MODULE_AUTHOR()
as this file is a collection of standalone helper functions that
were all added by different developers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Fix child node-lookup during probe, which ended up searching the whole
device tree depth-first starting at parent rather than just matching on
its children.

To make things worse, the parent node was prematurely freed, while the
child node was leaked.

Fixes: 2e57d567 ("mfd: 88pm860x: Device tree support")
Cc: stable <stable@vger.kernel.org>     # 3.7
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Fix child-node lookup during probe, which ended up searching the whole
device tree depth-first starting at parent rather than just matching on
its children.

Later sanity checks on node properties (which would likely be missing)
should prevent this from causing much trouble however, especially as the
original premature free of the parent node has already been fixed
separately (but that "fix" was apparently never backported to stable).

Fixes: e7ec014a ("Input: twl6040-vibra - update for device tree support")
Fixes: c52c545e ("Input: twl6040-vibra - fix DT node memory management")
Cc: stable <stable@vger.kernel.org>     # 3.6
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com> (on Pyra OMAP5 hardware)
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

A helper purported to look up a child node based on its name was using
the wrong of-helper and ended up prematurely freeing the parent of-node
while searching the whole device tree depth-first starting at the parent
node.

Fixes: 64b9e4d8 ("input: twl4030-vibra: Support for DT booted kernel")
Fixes: e661d0a0 ("Input: twl4030-vibra - fix ERROR: Bad of_node_put() warning")
Cc: stable <stable@vger.kernel.org>     # 3.7
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Some user-space applications expect multi-touch pressure
on contact to be reported if it is advertised in device
properties. Otherwise, such applications may treat reports
not as actual touches, but hovering. Currently this is
only advertised, but not reported.
Fix this by not advertising that ABS_MT_PRESSURE is supported.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Andrii Chepurnyi <andrii_chepurnyi@epam.com>
Patchwork-Id: 10140017
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

gpiod_() API requires including "linux/gpio/consumer.h". Also, we are not
using the legacy API nor the static board files descriptions, so no need to
include gpio.h nor gpio/machine.h.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Anthony Kim <anthony.kim@hideep.com>
Patchwork-Id: 10094831
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This is similar to commit a4b0a58b ("Input: elan_i2c - do not
clobber interrupt trigger on x86")

On x86 we historically used falling edge interrupts in the driver
because that's how first Chrome devices were configured. They also
did not use ACPI to enumerate I2C devices (because back then there
was no kernel support for that), so trigger was hard-coded in the
driver. However the controller behavior is much more reliable if
we use level triggers, and that is how we configured ARM devices,
and how want to configure newer x86 devices as well. All newer
x86 boxes have their I2C devices enumerated in ACPI.

Let's see if platform code (ACPI, DT) described interrupt and
specified particular trigger type, and if so, let's use it instead
of always clobbering trigger with IRQF_TRIGGER_FALLING. We will
still use this trigger type as a fallback if platform code left
interrupt trigger unconfigured.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Fixes:

drivers/input/joystick/analog.c:176:2: warning: #warning Precise timer not defined for this architecture. [-Wcpp]

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The touchpad of Lenovo Thinkpad L480 reports it's version as 15.

Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

1. change "to" to "too".
2. move ")" to the front of "\n", which discovered by Joe Perches.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Joe Perches <joe@perches.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Prepare input updates for 4.15 merge window.

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 114761
Addresses-Coverity-ID: 114762
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 114763
Addresses-Coverity-ID: 114764
Addresses-Coverity-ID: 114765
Addresses-Coverity-ID: 114766
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 114767
Addresses-Coverity-ID: 114768
Addresses-Coverity-ID: 114769
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We have to unlock before returning if input_allocate_device() fails.

Fixes: 04ce40a6 ("Input: uinput - remove uinput_allocate_device()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The S6SY761 touchscreen is a capicitive multi-touch controller
for mobile use. It's connected with i2c at the address 0x48.

This commit provides a basic version of the driver which can
handle only initialization, touch events and power states.

The controller is controlled by a firmware which, in the version
I currently have, doesn't provide all the possible
functionalities mentioned in the datasheet.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The HiDeep touchscreen device is a capacitive multi-touch controller
mainly for multi-touch supported devices use. It use I2C interface for
communication to IC and provide axis X, Y, Z locations for ten finger
touch through input event interface to userspace.

It support the Crimson and the Lime two type IC. They are different
the number of channel supported and FW size. But the working protocol
is same.

Signed-off-by: Anthony Kim <anthony.kim@hideep.com>
Acked-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Commit 1fa59bda ("ARM: shmobile: Remove legacy board code for
Armadillo-800 EVA"), removed the last user of st1232_pdata and the
"st1232-ts" platform device.  All remaining users use DT.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge with mainline to bring in SPDX markings to avoid annoying merge
problems when some header files get deleted.

Some Synaptics devices, such as LEN0073, use SMBUS version 3.

Signed-off-by: Yiannis Marangos <yiannis.marangos@gmail.com>
Acked-by: Benjamin Tissoires <benjamion.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If INPUT_PROP_DIRECT is set, userspace doesn't have to fall back to old
ways of identifying touchscreen devices.

In order to identify a touchscreen device, Android for example, seems to
already depend on INPUT_PROP_DIRECT to be present in drivers. udev still
checks for either BTN_TOUCH or INPUT_PROP_DIRECT. Checking for BTN_TOUCH
however can quite easily lead to false positives; it's a code that not only
touchscreen device drivers use.

According to the documentation, touchscreen drivers should have this
property set and in order to make life easy for userspace, let's set it.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

ELAN060C touchpad uses elan_i2c as its driver. It can be
found on Lenovo ideapad 320-14AST.

BugLink: https://bugs.launchpad.net/bugs/1727544


Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull x86 fixes from Ingo Molnar:
 "Two fixes:

   - A PCID related revert that fixes power management and performance
     regressions.

   - The module loader robustization and sanity check commit is rather
     fresh, but it looked like a good idea to apply because of the
     hidden data corruption problem such invalid modules could cause"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/module: Detect and skip invalid relocations
  Revert "x86/mm: Stop calling leave_mm() in idle code"

Pull RAS fix from Ingo Molnar:
 "Fix an RCU warning that triggers when /dev/mcelog is used"

* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mcelog: Get rid of RCU remnants

Pull perf fixes from Ingo Molnar:
 "Various fixes:

   - synchronize kernel and tooling headers

   - cgroup support fix

   - two tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools/headers: Synchronize kernel ABI headers
  perf/cgroup: Fix perf cgroup hierarchy support
  perf tools: Unwind properly location after REJECT
  perf symbols: Fix memory corruption because of zero length symbols

Pull irq fix from Ingo Molnar:
 "An irqchip driver init fix"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/irq-mvebu-gicp: Add missing spin_lock init

Pull core fixes from Ingo Molnar:

 - workaround for gcc asm handling

 - futex race fixes

 - objtool build warning fix

 - two watchdog fixes: a crash fix (revert) and a bug fix for
   /proc/sys/kernel/watchdog_thresh handling.

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Prevent GCC from merging annotate_unreachable(), take 2
  objtool: Resync objtool's instruction decoder source code copy with the kernel's latest version
  watchdog/hardlockup/perf: Use atomics to track in-use cpu counter
  watchdog/harclockup/perf: Revert a33d4484 ("watchdog/hardlockup/perf: Simplify deferred event destroy")
  futex: Fix more put_pi_state() vs. exit_pi_state_list() races

Merge tag 'enforcement-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull enforcement statement update from Greg KH:
 "Documentation: enforcement-statement: name updates

  Here are 12 patches for the kernel-enforcement-statement.rst file that
  add new names, fix the ordering of them, remove a duplicate, and
  remove some company markings that wished to be removed.

  All of these have passed the 0-day testing, even-though it is just a
  documentation file update :)"

* tag 'enforcement-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation: Add Frank Rowand to list of enforcement statement endorsers
  doc: add Willy Tarreau to the list of enforcement statement endorsers
  Documentation: Add Tim Bird to list of enforcement statement endorsers
  Documentation: Add my name to kernel enforcement statement
  Documentation: kernel-enforcement-statement.rst: proper sort names
  Documentation: Add Arm Ltd to kernel-enforcement-statement.rst
  Documentation: kernel-enforcement-statement.rst: Remove Red Hat markings
  Documentation: Add myself to the enforcement statement list
  Documentation: Sign kernel enforcement statement
  Add ack for Trond Myklebust to the enforcement statement
  Documentation: update kernel enforcement support list
  Documentation: add my name to supporters

There have been some cases where external tooling (e.g., kpatch-build)
creates a corrupt relocation which targets the wrong address.  This is a
silent failure which can corrupt memory in unexpected places.

On x86, the bytes of data being overwritten by relocations are always
initialized to zero beforehand.  Use that knowledge to add sanity checks
to detect such cases before they corrupt memory.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jeyu@kernel.org
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/37450d6c6225e54db107fba447ce9e56e5f758e9.1509713553.git.jpoimboe@redhat.com


[ Restructured the messages, as it's unclear whether the relocation or the target is corrupted. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull ARM fixes from Russell King:

 - omit EFI memory map sorting, which was recently introduced, but
   caused problems with the decompressor due to additional sections
   being emitted.

 - avoid unaligned load fault-generating instructions in the
   decompressor by switching to a private unaligned implementation.

 - add a symbol into the decompressor to further debug non-boot
   situations (ld's documentation is extremely poor for how "." works,
   ld doesn't seem to follow its own documentation!)

 - parse endian information to sparse

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: add debug ".edata_real" symbol
  ARM: 8716/1: pass endianness info to sparse
  efi/libstub: arm: omit sorting of the UEFI memory map
  ARM: 8715/1: add a private asm/unaligned.h

Pull KVM fixes from Paolo Bonzini:
 "Fixes for interrupt controller emulation in ARM/ARM64 and x86, plus a
  one-liner x86 KVM guest fix"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Update APICv on APIC reset
  KVM: VMX: Do not fully reset PI descriptor on vCPU reset
  kvm: Return -ENODEV from update_persistent_clock
  KVM: arm/arm64: vgic-its: Check GITS_BASER Valid bit before saving tables
  KVM: arm/arm64: vgic-its: Check CBASER/BASER validity before enabling the ITS
  KVM: arm/arm64: vgic-its: Fix vgic_its_restore_collection_table returned value
  KVM: arm/arm64: vgic-its: Fix return value for device table restore
  arm/arm64: kvm: Disable branch profiling in HYP code
  arm/arm64: kvm: Move initialization completion message
  arm/arm64: KVM: set right LR register value for 32 bit guest when inject abort
  KVM: arm64: its: Fix missing dynamic allocation check in scan_its_table