- Feb 17, 2015
-
-
Leonid Yegoshin authored
The load/store unaligned instructions have been removed in MIPS R6 so we need to re-implement the related macros using the regular load/store instructions. Moreover, the load/store from coprocessor 2 instructions have been reallocated in Release 6 so we will handle them in the emulator instead. Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Markos Chandras authored
The "addi" instruction will trap on overflows which is not something we need in this code, so we replace that with "addiu". Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00430.html Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: <stable@vger.kernel.org> # v3.15+ Cc: Paul Burton <paul.burton@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Markos Chandras authored
The jr instruction opcode has changed in R6 so make sure the correct ISA level is set prior using that instruction. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Leonid Yegoshin authored
Add the MIPS R6 related preprocessor definitions for FPU signal related functions. MIPS R6 only has FR=1 so avoid checking that bit on the C0/Status register. Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Leonid Yegoshin authored
Add the MIPS R6 related preprocessor definitions for save/restore FPU related functions. We also set the appropriate ISA level so the final return instruction "jr ra" will produce the correct opcode on R6. Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Leonid Yegoshin authored
Add MIPS R6 support to cache and ftlb exceptions, as well as to the hwrena and ebase register configuration. Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Markos Chandras authored
Print 'mips64r6' and/or 'mips32r6' if the kernel is running on a MIPS R6 core. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Markos Chandras authored
The instruction hazard barrier in the form of: jr.hb ra nop is valid on MIPS R6 as well. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Leonid Yegoshin authored
Add MIPS R6 support when decoding the config0 c0 register. Also add MIPS R6 support when examining the ebase c0 register to get the core number and when getting the shadow set number from the srsctl c0 register. Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Leonid Yegoshin authored
Just like MIPS R2, in MIPS R6 it is possible to determine if a timer interrupt has happened or not. Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Leonid Yegoshin authored
The current HW bugs checked in cpu-bugs64, do not apply to R6 cores and they cause compilation problems due to removed <R6 instructions, so do not check for them for the time being. Reviewed-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Markos Chandras authored
MIPS R6 changed the opcodes for LL/SC instructions so we need to set the appropriate ISA level. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Markos Chandras authored
"sub $reg, imm" is not a real MIPS instruction. The assembler can replace that with "addi $reg, -imm". However, addi has been removed from R6, so we replace the "sub" instruction with the "addiu" one. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Markos Chandras authored
MIPS R6 changed the opcodes for LL/SC instructions so we need to set the appropriate ISA level. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Markos Chandras authored
MIPS R6 changed the opcodes for LL/SC instructions so we need to set the correct ISA level. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Markos Chandras authored
MIPS R6 changed the opcodes for LL/SC instructions so we need to set the correct ISA level. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Markos Chandras authored
MIPS R6 changed the opcodes for LL/SC instructions so we need to set the correct ISA. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Markos Chandras authored
GCC versions supporting MIPS R6 use the ZC constraint to enforce a 9-bit offset for MIPS R6. We will use that for all MIPS R6 LL/SC instructions. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Markos Chandras authored
The GCC_OFF12_ASM macro is used for 12-bit immediate constrains but we will also use it for 9-bit constrains on MIPS R6 so we rename it to something more appropriate. Cc: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Markos Chandras authored
MIPS R6, just like MIPS R2, have scratch pad storage, so add a new symbol which is selected by MIPS R2 and R6. Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00389.html Cc: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Markos Chandras authored
MIPS R6 changed the 'cache' instruction opcode and reduced the offset field to 8 bits. This means we now have to adjust the base register every 256 bytes and as a result of which we can no longer use the previous cache functions. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Markos Chandras authored
Add the MIPS R6 related definitions to the IRQ related macros Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Markos Chandras authored
Add the MIPSR6 related definitions to MIPS hazards Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Leonid Yegoshin authored
Add MIPS R6 to the ISA definitions Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Markos Chandras authored
The following instructions have been removed from MIPS R6 ulw, ulh, swl, lwr, lwl, swr. However, all of them are used in the MIPS specific checksum implementation. As a result of which, we will use the generic checksum on MIPS R6 Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Markos Chandras authored
The "add" instruction is actually a macro in binutils and depending on the size of the immediate it can expand to an "addi" instruction. However, the "addi" instruction traps on overflows which is not something we want on address calculation. Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00121.html Cc: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Leonid Yegoshin authored
EI/DI instructions are available in MIPS R6 so add the needed definitions. Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Leonid Yegoshin authored
The HI/LO registers have been removed from MIPS R6. Instructions such as MULT and DIV have been replaced with a new pair of instructions for the HI/LO operations for example: MULT -> MUL, MUH DIV -> DIV, MOD So we avoid preserving the pre-R6 HI/LO registers in MIPS R6 Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Leonid Yegoshin authored
Define the MODULE_PROC_FAMILY for the MIPS R6 ISA. Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Markos Chandras authored
There are certain places where the code uses .set mips32 or .set mips64 or .set arch=r4000. In preparation of MIPS R6 support, and in order to use as less #ifdefs as possible, we define new macros to set similar annotations for MIPS R6. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
- Feb 16, 2015
-
-
Leonid Yegoshin authored
MIPS R6 defines new opcodes for ll, sc, cache and pref instructions so we need to take these into consideration in the micro-assembler. Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Leonid Yegoshin authored
MIPS R6 redefines several instructions and reduces the immediate field to 9-bits so add related macros for the microassembler. Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Leonid Yegoshin authored
Add build support for the latest revision (R6) of the MIPS ISA. microMIPS is not yet supported. Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00386.html Cc: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Leonid Yegoshin authored
Add a case in cpu_probe_mips for the MIPS generic QEMU processor ID. Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Leonid Yegoshin authored
Add a CPU_QEMU_GENERIC case to various switch statements. Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Leonid Yegoshin authored
Latest versions of QEMU added support for mips32r6-generic and mips64r6-generic cpu types so add related definitions in preparation of MIPS R6 support. This is also used for QEMU R2 generic cpus. Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com>
-
Markos Chandras authored
We need to check the ASEs support against the core's CFLAGS instead of depending to the default -march option from the toolchain. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9180/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Markos Chandras authored
activate_mm() and switch_mm() call get_new_mmu_context() which in turn can enable the HTW before the entryhi is changed with the new ASID. Since the latter will enable the HTW in local_flush_tlb_all(), then there is a small timing window where the HTW is running with the new ASID but with an old pgd since the TLBMISS_HANDLER_SETUP_PGD hasn't assigned a new one yet. In order to prevent that, we introduce a simple htw counter to avoid starting HTW accidentally due to nested htw_{start,stop}() sequences. Moreover, since various IPI calls can enforce TLB flushing operations on a different core, such an operation may interrupt another htw_{stop,start} in progress leading inconsistent updates of the htw_seq variable. In order to avoid that, we disable the interrupts whenever we update that variable. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # 3.17+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9118/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Markos Chandras authored
Whenever we modify a page table entry, we need to ensure that the HTW will not fetch a stable entry. And for that to happen we need to ensure that HTW is stopped before we modify the said entry otherwise the HTW may already be in the process of reading that entry and fetching the old information. As a result of which, we replace the htw_reset() calls with htw_{stop,start} in more appropriate places. This also removes the remaining users of htw_reset() and as a result we drop that macro Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # 3.17+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9116/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Markos Chandras authored
When we use htw_{start,stop}() outside of htw_reset(), we need to ensure that c0 changes have been propagated properly before we attempt to continue with subsequence memory operations. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # 3.17+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9114/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-