Merge misc fixes from Andrew Morton:
 "8 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm, numa: really disable NUMA balancing by default on single node machines
  MAINTAINERS: update Jingoo Han's email address
  CMA: page_isolation: check buddy before accessing it
  uidgid: make uid_valid and gid_valid work with !CONFIG_MULTIUSER
  kernfs: do not account ino_ida allocations to memcg
  gfp: add __GFP_NOACCOUNT
  tools/vm: fix page-flags build
  drivers/rtc/rtc-armada38x.c: remove unused local `flags'

Pull ACPI fixes from Rafael Wysocki:
 "Two fixes here, one revert of a recent ACPICA commit that broke audio
  support on one Dell machine and a fix for a long-standing issue that
  may cause systems to break randomly during boot.

  Specifics:

   - The recent ACPICA commit that set the ACPI _REV return value to 2
     (which is the value always used by Windows and now mandated by the
     spec too) in order to prevent the firmware people from using it to
     play tricks with us caused a serious audio regression to happen on
     Dell XPS 13 (the AML on that machine uses the _REV return value to
     decide how to expose audio to the OS and does that to hide the lack
     of proper support for its I2S audio in Linux), so revert that
     commit for now and we'll revisit the issue in the next cycle.

   - Ensure that the ordering of acpi_reserve_resources() with respect
     to the rest of the ACPI initialization sequence will always be the
     same, or the IO or memory region occupied by the ACPI fixed
     registers may be assigned to a PCI host bridge as a result of a
     race and random breakage ensues going forward"

* tag 'pm+acpi-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPICA: Permanently set _REV to the value '2'."
  ACPI / init: Fix the ordering of acpi_reserve_resources()

Pull arm64 fixes from Will Deacon:

 - fix potential memory leak in perf PMU probing

 - BPF sign extension fix for 64-bit immediates

 - fix build failure with unusual configuration

 - revert unused and broken branch patching from alternative code

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: perf: fix memory leak when probing PMU PPIs
  arm64: bpf: fix signedness bug in loading 64-bit immediate
  arm64: mm: Fix build error with CONFIG_SPARSEMEM_VMEMMAP disabled
  Revert "arm64: alternative: Allow immediate branch as alternative instruction"

Pull dmi fixes from Jean Delvare.

* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  firmware: dmi_scan: Fix ordering of product_uuid
  firmware: dmi_scan: Simplified displayed version

NUMA balancing is meant to be disabled by default on UMA machines but
the check is using nr_node_ids (highest node) instead of
num_online_nodes (online nodes).

The consequences are that a UMA machine with a node ID of 1 or higher
will enable NUMA balancing.  This will incur useless overhead due to
minor faults with the impact depending on the workload.  These are the
impact on the stats when running a kernel build on a single node machine
whose node ID happened to be 1:

  			       vanilla     patched
  NUMA base PTE updates          5113158           0
  NUMA huge PMD updates              643           0
  NUMA page range updates        5442374           0
  NUMA hint faults               2109622           0
  NUMA hint local faults         2109622           0
  NUMA hint local percent            100         100
  NUMA pages migrated                  0           0

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org>	[3.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Change my private email address.

Signed-off-by: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I had an issue:

    Unable to handle kernel NULL pointer dereference at virtual address 0000082a
    pgd = cc970000
    [0000082a] *pgd=00000000
    Internal error: Oops: 5 [#1] PREEMPT SMP ARM
    PC is at get_pageblock_flags_group+0x5c/0xb0
    LR is at unset_migratetype_isolate+0x148/0x1b0
    pc : [<c00cc9a0>]    lr : [<c0109874>]    psr: 80000093
    sp : c7029d00  ip : 00000105  fp : c7029d1c
    r10: 00000001  r9 : 0000000a  r8 : 00000004
    r7 : 60000013  r6 : 000000a4  r5 : c0a357e4  r4 : 00000000
    r3 : 00000826  r2 : 00000002  r1 : 00000000  r0 : 0000003f
    Flags: Nzcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
    Control: 10c5387d  Table: 2cb7006a  DAC: 00000015
    Backtrace:
        get_pageblock_flags_group+0x0/0xb0
        unset_migratetype_isolate+0x0/0x1b0
        undo_isolate_page_range+0x0/0xdc
        __alloc_contig_range+0x0/0x34c
        alloc_contig_range+0x0/0x18

This issue is because when calling unset_migratetype_isolate() to unset
a part of CMA memory, it try to access the buddy page to get its status:

		if (order >= pageblock_order) {
			page_idx = page_to_pfn(page) & ((1 << MAX_ORDER) - 1);
			buddy_idx = __find_buddy_index(page_idx, order);
			buddy = page + (buddy_idx - page_idx);

			if (!is_migrate_isolate_page(buddy)) {

But the begin addr of this part of CMA memory is very close to a part of
memory that is reserved at boot time (not in buddy system).  So add a
check before accessing it.

[akpm@linux-foundation.org: use conventional code layout]
Signed-off-by: Hui Zhu <zhuhui@xiaomi.com>
Suggested-by: Laura Abbott <labbott@redhat.com>
Suggested-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

{u,g}id_valid call {u,g}id_eq, which calls __k{u,g}id_val on both
arguments and compares.  With !CONFIG_MULTIUSER, __k{u,g}id_val return a
constant 0, which makes {u,g}id_valid always return false.  Change
{u,g}id_valid to compare their argument against -1 instead.  That produces
identical results in the normal CONFIG_MULTIUSER=y case, but with
!CONFIG_MULTIUSER will make {u,g}id_valid constant-fold into "return
true;" rather than "return false;".

This fixes uses of devpts without CONFIG_MULTIUSER.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reported-by: Fengguang Wu <fengguang.wu@intel.com&gt;,>
Cc: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

root->ino_ida is used for kernfs inode number allocations. Since IDA has
a layered structure, different IDs can reside on the same layer, which
is currently accounted to some memory cgroup. The problem is that each
kmem cache of a memory cgroup has its own directory on sysfs (under
/sys/fs/kernel/<cache-name>/cgroup). If the inode number of such a
directory or any file in it gets allocated from a layer accounted to the
cgroup which the cache is created for, the cgroup will get pinned for
good, because one has to free all kmem allocations accounted to a cgroup
in order to release it and destroy all its kmem caches. That said we
must not account layers of ino_ida to any memory cgroup.

Since per net init operations may create new sysfs entries directly
(e.g. lo device) or indirectly (nf_conntrack creates a new kmem cache
per each namespace, which, in turn, creates new sysfs entries), an easy
way to reproduce this issue is by creating network namespace(s) from
inside a kmem-active memory cgroup.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>	[4.0.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Not all kmem allocations should be accounted to memcg.  The following
patch gives an example when accounting of a certain type of allocations to
memcg can effectively result in a memory leak.  This patch adds the
__GFP_NOACCOUNT flag which if passed to kmalloc and friends will force the
allocation to go through the root cgroup.  It will be used by the next
patch.

Note, since in case of kmemleak enabled each kmalloc implies yet another
allocation from the kmemleak_object cache, we add __GFP_NOACCOUNT to
gfp_kmemleak_mask.

Alternatively, we could introduce a per kmem cache flag disabling
accounting for all allocations of a particular kind, but (a) we would not
be able to bypass accounting for kmalloc then and (b) a kmem cache with
this flag set could not be merged with a kmem cache without this flag,
which would increase the number of global caches and therefore
fragmentation even if the memory cgroup controller is not used.

Despite its generic name, currently __GFP_NOACCOUNT disables accounting
only for kmem allocations while user page allocations are always charged.
To catch abusing of this flag, a warning is issued on an attempt of
passing it to mem_cgroup_try_charge.

Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>	[4.0.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

libabikfs.a doesn't exist anymore, so we now need to link with libapi.a.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Reported-by: Fengguang Wu <fengguang.wu@gmail.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* acpi-init:
  ACPI / init: Fix the ordering of acpi_reserve_resources()

* acpica:
  Revert "ACPICA: Permanently set _REV to the value '2'."

In function dmi_present(), dmi_walk_early() calls dmi_table(), which
calls dmi_decode(), which ultimately calls dmi_save_uuid(). This last
function makes a decision based on the value of global variable
dmi_ver. The problem is that this variable is set right _after_
dmi_walk_early() returns. So dmi_save_uuid() always sees dmi_ver == 0
regardless of the actual version implemented.

This causes /sys/class/dmi/id/product_uuid to always use the old
ordering even on systems implementing DMI/SMBIOS 2.6 or later, which
should use the new ordering.

This is broken since kernel v3.8 for legacy DMI implementations and
since kernel v3.10 for SMBIOS 2 implementations. SMBIOS 3
implementations with the 64-bit entry point are not affected.

The first breakage does not matter much as in practice legacy DMI
implementations are always for versions older than 2.6, which is when
the UUID ordering changed. The second breakage is more problematic as
it affects the vast majority of x86 systems manufactured since 2009.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 9f9c9cbb ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists")
Fixes: 79bae42d ("dmi_scan: refactor dmi_scan_machine(), {smbios,dmi}_present()")
Acked-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Artem Savkov <artem.savkov@gmail.com>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: stable@vger.kernel.org [v3.10+]

The trailing .x adds no information for the reader, and if anyone
tries to parse that line, this is more work as they have 3 different
formats to handle instead of 2. Plus, this makes backporting fixes
harder.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 95be58df ("firmware: dmi_scan: Use full dmi version for SMBIOS3")
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>

Pull networking fixes from David Miller:

 1) Handle max TX power properly wrt VIFs and the MAC in iwlwifi, from
    Avri Altman.

 2) Use the correct FW API for scan completions in iwlwifi, from Avraham
    Stern.

 3) FW monitor in iwlwifi accidently uses unmapped memory, fix from Liad
    Kaufman.

 4) rhashtable conversion of mac80211 station table was buggy, the
    virtual interface was not taken into account.  Fix from Johannes
    Berg.

 5) Fix deadlock in rtlwifi by not using a zero timeout for
    usb_control_msg(), from Larry Finger.

 6) Update reordering state before calculating loss detection, from
    Yuchung Cheng.

 7) Fix off by one in bluetooth firmward parsing, from Dan Carpenter.

 8) Fix extended frame handling in xiling_can driver, from Jeppe
    Ledet-Pedersen.

 9) Fix CODEL packet scheduler behavior in the presence of TSO packets,
    from Eric Dumazet.

10) Fix NAPI budget testing in fm10k driver, from Alexander Duyck.

11) macvlan needs to propagate promisc settings down the the lower
    device, from Vlad Yasevich.

12) igb driver can oops when changing number of rings, from Toshiaki
    Makita.

13) Source specific default routes not handled properly in ipv6, from
    Markus Stenberg.

14) Use after free in tc_ctl_tfilter(), from WANG Cong.

15) Use softirq spinlocking in netxen driver, from Tony Camuso.

16) Two ARM bpf JIT fixes from Nicolas Schichan.

17) Handle MSG_DONTWAIT properly in ring based AF_PACKET sends, from
    Mathias Kretschmer.

18) Fix x86 bpf JIT implementation of FROM_{BE16,LE16,LE32}, from Alexei
    Starovoitov.

19) ll_temac driver DMA maps TX packet header with incorrect length, fix
    from Michal Simek.

20) We removed pm_qos bits from netdevice.h, but some indirect
    references remained.  Kill them.  From David Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits)
  net: Remove remaining remnants of pm_qos from netdevice.h
  e1000e: Add pm_qos header
  net: phy: micrel: Fix regression in kszphy_probe
  net: ll_temac: Fix DMA map size bug
  x86: bpf_jit: fix FROM_BE16 and FROM_LE16/32 instructions
  netns: return RTM_NEWNSID instead of RTM_GETNSID on a get
  Update be2net maintainers' email addresses
  net_sched: gred: use correct backlog value in WRED mode
  pppoe: drop pppoe device in pppoe_unbind_sock_work
  net: qca_spi: Fix possible race during probe
  net: mdio-gpio: Allow for unspecified bus id
  af_packet / TX_RING not fully non-blocking (w/ MSG_DONTWAIT).
  bnx2x: limit fw delay in kdump to 5s after boot
  ARM: net: delegate filter to kernel interpreter when imm_offset() return value can't fit into 12bits.
  ARM: net fix emit_udiv() for BPF_ALU | BPF_DIV | BPF_K intruction.
  mpls: Change reserved label names to be consistent with netbsd
  usbnet: avoid integer overflow in start_xmit
  netxen_nic: use spin_[un]lock_bh around tx_clean_lock (2)
  net: xgene_enet: Set hardware dependency
  net: amd-xgbe: Add hardware dependency
  ...

Commit e2c65448 removed pm_qos from struct net_device but left the
comment and header file. Remove those.

Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit e2c65448 moved pm_qos_req to e1000_adapter. Add the header file
that defines the struct.

Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't do clock-mode-select if clk == NULL,
since when building without CONFIG_HAVE_CLK,
clk_get returns NULL and clk_get_rate returns 0.

Doing clock-mode-select in this cause causes kszphy_probe to
return -EINVAL and thus prevents the device from being probed.

The original code (before regression) would return 0
when building without CONFIG_HAVE_CLK.

Cc: stable <stable@vger.kernel.org> # 3.18+
Fixes: 1fadee0c ("net/phy: micrel: Add clock support for
KSZ8021/KSZ8031")
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Niklas Cassel <niklass@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

DMA allocates skb->len instead of headlen
which is used for DMA.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

FROM_BE16:
'ror %reg, 8' doesn't clear upper bits of the register,
so use additional 'movzwl' insn to zero extend 16 bits into 64

FROM_LE16:
should zero extend lower 16 bits into 64 bit

FROM_LE32:
should zero extend lower 32 bits into 64 bit

Fixes: 89aa0758 ("net: sock: allow eBPF programs to be attached to sockets")
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MIPS fixes from Ralf Baechle:
 "One build fix for build breakage of all MIPS SMP kernels caused by
  Rusty's fix of obsolete use of cpu mask helpers, another to fix the FP
  ABI selection when loading an ELF binary"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: fix FP mode selection in lieu of .MIPS.abiflags data
  MIPS: SMP: Fix build error.

Pull rdma fixes from Doug Ledford:
 - update MAINTAINERS git repo pointer
 - printk garbage fix
 - fix for qib and iw_cxgb4 bugs introduced in 4.1 window
 - fix for an older iWARP netlink bug
 - fix a memcpy issue in ehca driver

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  infiniband: Remove duplicated KERN_<LEVEL> from pr_<level> uses
  IB/qib: fix test of unsigned variable
  RDMA/core: Fix for parsing netlink string attribute
  MAINTAINERS: update the official rdma git repo
  iw_cxgb4: use wildcard mapping for getting remote addr info
  IB/ehca: use correct destination for memcpy

Usually, RTM_NEWxxx is returned on a get (same as a dump).

Fixes: 0c7aecd4 ("netns: add rtnl cmd to add and get peer netns ids")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull power supply and reset fixes from Sebastian Reichel:
 "misc fixes"

* tag 'for-v4.1-rc' of git://git.infradead.org/battery-2.6:
  power: bq27x00_battery: Add missing MODULE_ALIAS
  power: reset: Add MFD_SYSCON depends for brcmstb
  power: reset: ltc2952: Remove bogus hrtimer_start() return value checks
  power_supply: fix oops in collie_battery driver
  power/reset: at91: fix return value check in at91_reset_platform_probe()
  MAINTAINERS: Add me as maintainer of Nokia N900 power supply drivers
  axp288_fuel_gauge: Add original author details

Revert commit b1ef2972 (ACPICA: Permanently set _REV to the value
'2'.) as it causes a sound regression to happen on Dell XPS 13 (2015).

Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

These KERN_<LEVEL> uses are unnecessary with pr_<level> and cause
bad logging output so remove them.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Commit d4988623 ("IB/qib: use arch_phys_wc_add()")
adjusted mtrr inititialization to use the new interface.

Unfortunately, the new interface returns a signed
value and the patch tested the unsigned wc_cookie.

Fix the issue by changing the type of wc_cookie to int.  For
the success case the ret left at zero to avoid
a warning from the caller.  For failure wc_cookie
is used as the ret.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The string iwpm_ulib_name is recorded in a nlmsg as a netlink attribute.
Without this fix parsing of the nlmsg by the userspace port mapper service fails
because of unknown attribute length, causing the port mapper service not to
register the client, which has sent the nlmsg.

Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Cc: <stable@vger.kernel.org> #v3.16
Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Commit 46490b57 ("MIPS: kernel: elf: Improve the overall ABI and FPU
mode checks") reworked the ELF FP ABI mode selection logic, but when
CONFIG_MIPS_O32_FP64_SUPPORT is enabled it breaks the use of binaries
which have no PT_MIPS_ABIFLAGS program header & associated
.MIPS.abiflags section.

A default mode is selected based upon whether the ELF contains MIPS32 or
MIPS64 code, but that selection is made in arch_elf_pt_proc.
arch_elf_pt_proc only executes when a PT_MIPS_ABIFLAGS program header is
found. If one is not found then arch_elf_pt_proc is never called, and no
default overall_fp_mode value is selected. When arch_check_elf is
called, both abi0 & abi1 are MIPS_ABI_FP_UNKNOWN which leads to both
prog_req & interp_req being set to none_req. none_req matches none of
the conditions for mode selection at the end of arch_check_elf, so
overall_fp_mode is left untouched. Finally once mips_set_personality_fp
is called the BUG() in the default case is then hit & the kernel likely
panics.

Fix this by moving the selection of a default overall mode to the start
of arch_check_elf, which runs once per ELF executed regardless of
whether it has a PT_MIPS_ABIFLAGS program header.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Matthew Fortune <matthew.fortune@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.0+
Patchwork: http://patchwork.linux-mips.org/patch/9978/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Commit d795ef9a ("arm64: perf: don't warn about missing
interrupt-affinity property for PPIs") added a check for PPIs so that
we avoid parsing the interrupt-affinity property for these naturally
affine interrupts.

Unfortunately, this check can trigger an early (successful) return and
we will leak the irqs array. This patch fixes the issue by reordering
the code so that the check is performed before any independent
allocation.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Emulex developers' email addresses are now "@avagotech" instead of
"@emulex". I'm also replacing Subbu with Padmanabh and Sriharsha in the
maintainers list. The driver's heading was outdated and did not include
some of the chip types (BE3, Lancer and Skyhawk) that the driver has
been supporting for a longtime. I've updated this too.

Signed-off-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

  CC      arch/mips/kernel/smp.o
arch/mips/kernel/smp.c: In function ‘start_secondary’:
arch/mips/kernel/smp.c:149:2: error: passing argument 2 of ‘cpumask_set_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror]
  cpumask_set_cpu(cpu, &cpu_callin_map);
  ^
In file included from ./arch/mips/include/asm/processor.h:14:0,
                 from ./arch/mips/include/asm/thread_info.h:15,
                 from include/linux/thread_info.h:54,
                 from include/asm-generic/preempt.h:4,
                 from arch/mips/include/generated/asm/preempt.h:1,
                 from include/linux/preempt.h:18,
                 from include/linux/interrupt.h:8,
                 from arch/mips/kernel/smp.c:24:
include/linux/cpumask.h:272:91: note: expected ‘struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’
 static inline void cpumask_set_cpu(unsigned int cpu, struct cpumask *dstp)
                                                                                           ^
arch/mips/kernel/smp.c: In function ‘smp_prepare_boot_cpu’:
arch/mips/kernel/smp.c:211:2: error: passing argument 2 of ‘cpumask_set_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror]
  cpumask_set_cpu(0, &cpu_callin_map);
  ^
In file included from ./arch/mips/include/asm/processor.h:14:0,
                 from ./arch/mips/include/asm/thread_info.h:15,
                 from include/linux/thread_info.h:54,
                 from include/asm-generic/preempt.h:4,
                 from arch/mips/include/generated/asm/preempt.h:1,
                 from include/linux/preempt.h:18,
                 from include/linux/interrupt.h:8,
                 from arch/mips/kernel/smp.c:24:
include/linux/cpumask.h:272:91: note: expected ‘struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’
 static inline void cpumask_set_cpu(unsigned int cpu, struct cpumask *dstp)
                                                                                           ^
arch/mips/kernel/smp.c: In function ‘__cpu_up’:
arch/mips/kernel/smp.c:221:10: error: passing argument 2 of ‘cpumask_test_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror]
  while (!cpumask_test_cpu(cpu, &cpu_callin_map))
          ^
In file included from ./arch/mips/include/asm/processor.h:14:0,
                 from ./arch/mips/include/asm/thread_info.h:15,
                 from include/linux/thread_info.h:54,
                 from include/asm-generic/preempt.h:4,
                 from arch/mips/include/generated/asm/preempt.h:1,
                 from include/linux/preempt.h:18,
                 from include/linux/interrupt.h:8,
                 from arch/mips/kernel/smp.c:24:
include/linux/cpumask.h:294:90: note: expected ‘const struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’
 static inline int cpumask_test_cpu(int cpu, const struct cpumask *cpumask)
                                                                                          ^
cc1: all warnings being treated as errors
make[2]: *** [arch/mips/kernel/smp.o] Error 1
make[1]: *** [arch/mips/kernel] Error 2
make: *** [arch/mips] Error 2

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Linus prefers kernel.org repos to github repos for security.

Signed-off-by: Doug Ledford <dledford@redhat.com>

Pull nfsd bugfixes from Bruce Fields:
 "Mainly pnfs fixes (and for problems with generic callback code made
  more obvious by pnfs)"

* 'for-4.1' of git://linux-nfs.org/~bfields/linux:
  nfsd: skip CB_NULL probes for 4.1 or later
  nfsd: fix callback restarts
  nfsd: split transport vs operation errors for callbacks
  svcrpc: fix potential GSSX_ACCEPT_SEC_CONTEXT decoding failures
  nfsd: fix pNFS return on close semantics
  nfsd: fix the check for confirmed openowner in nfs4_preprocess_stateid_op
  nfsd/blocklayout: pretend we can send deviceid notifications

For listening endpoints bound to the wildcard address, we need to pass
the wildcard address mapping to iwpm_get_remote_info() instead of the
mapped address of the new child connection.

Without this fix, and with iwarp port mapping enabled, each iw_cxgb4
connection that is spawned from a listening endpoint bound to the wildcard
address, will generate an annoying dmesg entry about failing to find
the remote address mapping info, and the connection state displayed in
debugfs under /sys/kernel/debug/iw_cxgb4/<pci-slot-no>/eps  will not have
the peer's address/port mapping info.  The connection still works though.

Fixes: 5b6b8fe6 ("RDMA/cxgb4: Report the actual address of the remote connecting peer")

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Using an element of a struct as the address for the memcpy of the whole
struct may introduce a buffer overflow and does not help readability either
simply pass the real thing as first argument to memcpy.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Pull spi fixes from Mark Brown:
 "A number of driver specific fixes (including several missing
  dependencies for randconfig type cases) plus two core fixes.

  One makes the setup_transfer() callback optional which unbreaks some
  drivers which had been merged with it omitted due to local versions of
  this patch and another ensures that we don't corrupt data by leaking
  internal dummy buffers to callers, causing the callers to think they
  allocated those buffers"

* tag 'spi-fix-v4.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fsl-espi: fix behaviour for full-duplex xfers
  spi: fsl-spi: fix devm_ioremap_resource() error case
  spi: Kconfig: Add SOC_LS1021A to SPI_FSL_DSPI dependence
  spi/omap2-mcpsi: Always call spi_finalize_current_message()
  spi: fsl-spi: use devm_ioremap_resource() to map parameter ram on CPM1
  spi: bitbang: Make setup_transfer() callback optional
  spi: check tx_buf and rx_buf in spi_unmap_msg
  spi: bcm2835: change timeout of polling driver to 1s
  spi: bcm2835: Add GPIOLIB dependency

Pull iommu fixes from Joerg Roedel:
 "Three fixes have queued up:

   - reference count fix in the AMD IOMMUv2 driver

   - sign extension fix in the ARM-SMMU driver

   - build fix for rockchip driver with device tree"

* tag 'iommu-fixes-v4.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/arm-smmu: Fix sign-extension of upstream bus addresses at stage 1
  iommu/rockchip: Fix build without CONFIG_OF
  iommu/amd: Fix bug in put_pasid_state_wait

Pull crypto fixes from Herbert Xu:
 "This fixes a the implementation of CRC32 on arm64 where it incorrectly
  applied negation on the result.

  It also fixes the arm64 implementations of SHA/SHA256 where in some
  cases it may end up finalising the result twice"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: arm64/sha2-ce - prevent asm code finalization in final() path
  crypto: arm64/sha1-ce - prevent asm code finalization in final() path
  crypto: arm64/crc32 - bring in line with generic CRC32