md: fix raid10 hang issue caused by barrier

When both regular IO and resync IO happen at the same time,
and if we also need to split regular. Then we can see tasks
hang due to barrier.

1. resync thread
[ 1463.757205] INFO: task md1_resync:5215 blocked for more than 480 seconds.
[ 1463.757207]       Not tainted 4.19.5-1-default #1
[ 1463.757209] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1463.757212] md1_resync      D    0  5215      2 0x80000000
[ 1463.757216] Call Trace:
[ 1463.757223]  ? __schedule+0x29a/0x880
[ 1463.757231]  ? raise_barrier+0x8d/0x140 [raid10]
[ 1463.757236]  schedule+0x78/0x110
[ 1463.757243]  raise_barrier+0x8d/0x140 [raid10]
[ 1463.757248]  ? wait_woken+0x80/0x80
[ 1463.757257]  raid10_sync_request+0x1f6/0x1e30 [raid10]
[ 1463.757265]  ? _raw_spin_unlock_irq+0x22/0x40
[ 1463.757284]  ? is_mddev_idle+0x125/0x137 [md_mod]
[ 1463.757302]  md_do_sync.cold.78+0x404/0x969 [md_mod]
[ 1463.757311]  ? wait_woken+0x80/0x80
[ 1463.757336]  ? md_rdev_init+0xb0/0xb0 [md_mod]
[ 1463.757351]  md_thread+0xe9/0x140 [md_mod]
[ 1463.757358]  ? _raw_spin_unlock_irqrestore+0x2e/0x60
[ 1463.757364]  ? __kthread_parkme+0x4c/0x70
[ 1463.757369]  kthread+0x112/0x130
[ 1463.757374]  ? kthread_create_worker_on_cpu+0x40/0x40
[ 1463.757380]  ret_from_fork+0x3a/0x50

2. regular IO
[ 1463.760679] INFO: task kworker/0:8:5367 blocked for more than 480 seconds.
[ 1463.760683]       Not tainted 4.19.5-1-default #1
[ 1463.760684] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1463.760687] kworker/0:8     D    0  5367      2 0x80000000
[ 1463.760718] Workqueue: md submit_flushes [md_mod]
[ 1463.760721] Call Trace:
[ 1463.760731]  ? __schedule+0x29a/0x880
[ 1463.760741]  ? wait_barrier+0xdd/0x170 [raid10]
[ 1463.760746]  schedule+0x78/0x110
[ 1463.760753]  wait_barrier+0xdd/0x170 [raid10]
[ 1463.760761]  ? wait_woken+0x80/0x80
[ 1463.760768]  raid10_write_request+0xf2/0x900 [raid10]
[ 1463.760774]  ? wait_woken+0x80/0x80
[ 1463.760778]  ? mempool_alloc+0x55/0x160
[ 1463.760795]  ? md_write_start+0xa9/0x270 [md_mod]
[ 1463.760801]  ? try_to_wake_up+0x44/0x470
[ 1463.760810]  raid10_make_request+0xc1/0x120 [raid10]
[ 1463.760816]  ? wait_woken+0x80/0x80
[ 1463.760831]  md_handle_request+0x121/0x190 [md_mod]
[ 1463.760851]  md_make_request+0x78/0x190 [md_mod]
[ 1463.760860]  generic_make_request+0x1c6/0x470
[ 1463.760870]  raid10_write_request+0x77a/0x900 [raid10]
[ 1463.760875]  ? wait_woken+0x80/0x80
[ 1463.760879]  ? mempool_alloc+0x55/0x160
[ 1463.760895]  ? md_write_start+0xa9/0x270 [md_mod]
[ 1463.760904]  raid10_make_request+0xc1/0x120 [raid10]
[ 1463.760910]  ? wait_woken+0x80/0x80
[ 1463.760926]  md_handle_request+0x121/0x190 [md_mod]
[ 1463.760931]  ? _raw_spin_unlock_irq+0x22/0x40
[ 1463.760936]  ? finish_task_switch+0x74/0x260
[ 1463.760954]  submit_flushes+0x21/0x40 [md_mod]

So resync io is waiting for regular write io to complete to
decrease nr_pending (conf->barrier++ is called before waiting).
The regular write io splits another bio after call wait_barrier
which call nr_pending++, then the splitted bio would continue
with raid10_write_request -> wait_barrier, so the splitted bio
has to wait for barrier to be zero, then deadlock happens as
follows.

	resync io		regular io

	raise_barrier
				wait_barrier
				generic_make_request
				wait_barrier

To resolve the issue, we need to call allow_barrier to decrease
nr_pending before generic_make_request since regular IO is not
issued to underlying devices, and wait_barrier is called again
to ensure no internal IO happening.

Fixes: fc9977dd ("md/raid10: simplify the splitting of requests.")
Reported-and-tested-by: Siniša Bandin <sinisa@4net.rs>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>