Merge tag 'mtd/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull mtd updates from Miquel Raynal:
 "The main set of changes is related to Uwe's work converting platform
  remove callbacks to return void. Comes next (in number of changes)
  Kees' additional structures annotations to improve the sanitizers. The
  usual amount of cleanups apply.

  About the more substancial contribution, one main function of the
  partitions core could return an error which was not checked, this is
  now fixed. On the bindings side, fixed partitions can now have a
  compression property. Finally, an erroneous situation is now always
  avoided in the MAP RAM driver.

  CFI:

   - A several years old byte swap has been fixed.

  NAND:

   - The subsystem has, as usual, seen a bit of cleanup being done this
     cycle, typically return values of platform_get_irq() and
     devm_kasprintf(). There is also a better ECC check in the Arasan
     driver. This comes with smaller misc changes.

   - In the SPI-NAND world there is now support for Foresee F35SQA002G,
     Winbond W25N and XTX XT26 chips.

  SPI NOR:

   - For SPI NOR we cleaned the flash info entries in order to have them
     slimmer and self explanatory. In order to make the entries as slim
     as possible, we introduced sane default values so that the actual
     flash entries don't need to specify them. We now use a flexible
     macro to specify the flash ID instead of the previous INFOx()
     macros that had hardcoded ID lengths.

     Instead of:

         { "w25q512nwm", INFO(0xef8020, 0, 64 * 1024, 0)
                 OTP_INFO(256, 3, 0x1000, 0x1000) },

     We now use:

         .id = SNOR_ID(0xef, 0x80, 0x20),
         .name = "w25q512nwm",
         .otp = SNOR_OTP(256, 3, 0x1000, 0x1000),

   - We also removed some flash entries: the very old Catalyst SPI
     EEPROMs that were introduced once with the SPI-NOR subsystem, and a
     Fujitsu MRAM. Both should use the at25 EEPROM driver. The latter
     even has device tree bindings for the at25 driver.

   - We made sure that the conversion didn't introduce any unwanted
     changes by comparing the .rodata segment before and after the
     conversion. The patches landed in linux-next immediately after
     v6.6-rc2, we haven't seen any regressions yet.

   - Apart of the autumn cleaning we introduced a new flash entry,
     at25ff321a, and added block protection support for mt25qu512a"

* tag 'mtd/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (91 commits)
  mtd: cfi_cmdset_0001: Byte swap OTP info
  mtd: rawnand: meson: check return value of devm_kasprintf()
  mtd: rawnand: intel: check return value of devm_kasprintf()
  mtd: rawnand: sh_flctl: Convert to module_platform_driver()
  mtd: spi-nor: micron-st: use SFDP table for mt25qu512a
  mtd: spi-nor: micron-st: enable lock/unlock for mt25qu512a
  mtd: rawnand: Remove unused of_gpio.h inclusion
  mtd: spinand: Add support for XTX XT26xxxDxxxxx
  mtd: spinand: winbond: add support for serial NAND flash
  mtd: rawnand: cadence: Annotate struct cdns_nand_chip with __counted_by
  mtd: rawnand: Annotate struct mtk_nfc_nand_chip with __counted_by
  mtd: spinand: add support for FORESEE F35SQA002G
  mtd: rawnand: rockchip: Use struct_size()
  mtd: rawnand: arasan: Include ECC syndrome along with in-band data while checking for ECC failure
  mtd: Use device_get_match_data()
  mtd: spi-nor: nxp-spifi: Convert to platform remove callback returning void
  mtd: spi-nor: hisi-sfc: Convert to platform remove callback returning void
  mtd: maps: sun_uflash: Convert to platform remove callback returning void
  mtd: maps: sa1100-flash: Convert to platform remove callback returning void
  mtd: maps: pxa2xx-flash: Convert to platform remove callback returning void
  ...