iio: accel: mxc4005: Interrupt handling fixes
There are 2 issues with interrupt handling in the mxc4005 driver: 1. mxc4005_set_trigger_state() writes MXC4005_REG_INT_MASK1_BIT_DRDYE (0x01) to INT_MASK1 to enable the interrupt, but to disable the interrupt it writes ~MXC4005_REG_INT_MASK1_BIT_DRDYE which is 0xfe, so it enables all other interrupt sources in the INT_SRC1 register. On the MXC4005 this is not an issue because only bit 0 of the register is used. On the MXC6655 OTOH this is a problem since bit7 is used as TC (Temperature Compensation) disable bit and writing 1 to this disables Temperature Compensation which should only be done when running self-tests on the chip. Write 0 instead of ~MXC4005_REG_INT_MASK1_BIT_DRDYE to disable the interrupts to fix this. 2. The datasheets for the MXC4005 / MXC6655 do not state what the reset value for the INT_MASK0 and INT_MASK1 registers is and since these are write only we also cannot learn this from the hw. Presumably the reset value for both is all 0, which means all interrupts disabled. Explicitly set both registers to 0 from mxc4005_chip_init() to ensure both masks are actually set to 0. Fixes: 79846e33 ("iio: accel: mxc4005: add support for mxc6655") Signed-off-by:Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240326113700.56725-2-hdegoede@redhat.com Cc: <Stable@vger.kernel.org> Signed-off-by: