mlxsw: core_thermal: Use static trip points for transceiver modules

The driver registers a thermal zone for each transceiver module and
tries to set the trip point temperatures according to the thresholds
read from the transceiver. If a threshold cannot be read or if a
transceiver is unplugged, the trip point temperature is set to zero,
which means that it is disabled as far as the thermal subsystem is
concerned.

A recent change in the thermal core made it so that such trip points are
no longer marked as disabled, which lead the thermal subsystem to
incorrectly set the associated cooling devices to the their maximum
state [1]. A fix to restore this behavior was merged in commit
f1b80a38 ("thermal: core: Restore behavior regarding invalid trip
points"). However, the thermal maintainer suggested to not rely on this
behavior and instead always register a valid array of trip points [2].

Therefore, create a static array of trip points with sane defaults
(suggested by Vadim) and register it with the thermal zone of each
transceiver module. User space can choose to override these defaults
using the thermal zone sysfs interface since these files are writeable.

Before:

 $ cat /sys/class/thermal/thermal_zone11/type
 mlxsw-module11
 $ cat /sys/class/thermal/thermal_zone11/trip_point_*_temp
 65000
 75000
 80000

After:

 $ cat /sys/class/thermal/thermal_zone11/type
 mlxsw-module11
 $ cat /sys/class/thermal/thermal_zone11/trip_point_*_temp
 55000
 65000
 80000

Also tested by reverting commit f1b80a38 ("thermal: core: Restore
behavior regarding invalid trip points") and making sure that the
associated cooling devices are not set to their maximum state.

[1] https://lore.kernel.org/linux-pm/ZA3CFNhU4AbtsP4G@shredder/
[2] https://lore.kernel.org/linux-pm/f78e6b70-a963-c0ca-a4b2-0d4c6aeef1fb@linaro.org/



Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>