usb: dwc3: Set DMA and coherent masks early

dwc3 allocates scratch and event buffers in the top-level driver. Hack the
probe function to set the DMA mask before trying to allocate these.

I think the event buffers are only used in device mode, but the scratch
buffers may be used if core hibernation is enabled.

usb: dwc3: add support for new DT quirks

Apply the optional axi-pipe-limit and dis-in-autoretry-quirk properties
during driver probe.

Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>

phy: phy-brcm-usb: Add 2712 support

usb: dwc3: if the host controller instance number is present in DT, use it

If two instances of a dwc3 host controller are specified in devicetree,
then the probe order may be arbitrary which results in the device names
swapping on a per-boot basis.

If a "usb" alias with the instance number is specified, then use
that to construct the device name instead of autogenerating one.

Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>

rp1 dwc3 changes

drivers: usb: dwc3: allow setting GTXTHRCFG on dwc_usb3.0 hardware

Equivalent register fields exist in the SuperSpeed Host version of the
hardware, so allow the use of TX thresholds if specified in devicetree.

Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>

drivers: usb: dwc3: remove downstream quirk dis-in-autoretry

Upstream have unilaterally disabled the feature.

Partially reverts 6e9142a26ee0fdc3a5adc49ed6cedc0b16ec2ed1 (downstream)

Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>