ALSA: usb-audio: Fix microphone sound on Nexigo webcam.
I own an external usb Webcam, model NexiGo N930AF, which had low mic volume and inconsistent sound quality. Video works as expected. (snip) [ +0.047857] usb 5-1: new high-speed USB device number 2 using xhci_hcd [ +0.003406] usb 5-1: New USB device found, idVendor=1bcf, idProduct=2283, bcdDevice=12.17 [ +0.000007] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0.000004] usb 5-1: Product: NexiGo N930AF FHD Webcam [ +0.000003] usb 5-1: Manufacturer: SHENZHEN AONI ELECTRONIC CO., LTD [ +0.000004] usb 5-1: SerialNumber: 20201217011 [ +0.003900] usb 5-1: Found UVC 1.00 device NexiGo N930AF FHD Webcam (1bcf:2283) [ +0.025726] usb 5-1: 3:1: cannot get usb sound sample rate freq at ep 0x86 [ +0.071482] usb 5-1: 3:2: cannot get usb sound sample rate freq at ep 0x86 [ +0.004679] usb 5-1: 3:3: cannot get usb sound sample rate freq at ep 0x86 [ +0.051607] usb 5-1: Warning! Unlikely big volume range (=4096), cval->res is probably wrong. [ +0.000005] usb 5-1: [7] FU [Mic Capture Volume] ch = 1, val = 0/4096/1 Set up quirk cval->res to 16 for 256 levels, Set GET_SAMPLE_RATE quirk flag to stop trying to get the sample rate. Confirmed that happened anyway later due to the backoff mechanism, after 3 failures All audio stream on device interfaces share the same values, apart from wMaxPacketSize and tSamFreq : (snip) Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 3 bNumEndpoints 1 bInterfaceClass 1 Audio bInterfaceSubClass 2 Streaming bInterfaceProtocol 0 iInterface 0 AudioStreaming Interface Descriptor: bLength 7 bDescriptorType 36 bDescriptorSubtype 1 (AS_GENERAL) bTerminalLink 8 bDelay 1 frames wFormatTag 0x0001 PCM AudioStreaming Interface Descriptor: bLength 11 bDescriptorType 36 bDescriptorSubtype 2 (FORMAT_TYPE) bFormatType 1 (FORMAT_TYPE_I) bNrChannels 1 bSubframeSize 2 bBitResolution 16 bSamFreqType 1 Discrete tSamFreq[ 0] 44100 Endpoint Descriptor: bLength 9 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 5 Transfer Type Isochronous Synch Type Asynchronous Usage Type Data wMaxPacketSize 0x005c 1x 92 bytes bInterval 4 bRefresh 0 bSynchAddress 0 AudioStreaming Endpoint Descriptor: bLength 7 bDescriptorType 37 bDescriptorSubtype 1 (EP_GENERAL) bmAttributes 0x01 Sampling Frequency bLockDelayUnits 0 Undefined wLockDelay 0x0000 (snip) Based on the usb data about manufacturer, SPCA2281B3 is the most likely controller IC Manufacturer does not provide link for datasheet nor detailed specs. No way to confirm if the firmware supports any other way of getting the sample rate. Testing patch provides consistent good sound recording quality and volume range. (snip) [ +0.045764] usb 5-1: new high-speed USB device number 2 using xhci_hcd [ +0.106290] usb 5-1: New USB device found, idVendor=1bcf, idProduct=2283, bcdDevice=12.17 [ +0.000006] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0.000004] usb 5-1: Product: NexiGo N930AF FHD Webcam [ +0.000003] usb 5-1: Manufacturer: SHENZHEN AONI ELECTRONIC CO., LTD [ +0.000004] usb 5-1: SerialNumber: 20201217011 [ +0.043700] usb 5-1: set resolution quirk: cval->res = 16 [ +0.002585] usb 5-1: Found UVC 1.00 device NexiGo N930AF FHD Webcam (1bcf:2283) Signed-off-by: Christos Skevis <xristos.thes@gmail.com> Link: https://lore.kernel.org/r/20231006155330.399393-1-xristos.thes@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
Please register or sign in to comment