- Jun 02, 2019
-
-
Mike Rapoport authored
When get_user_pages*() is called with pages = NULL, the processing of VM_FAULT_RETRY terminates early without actually retrying to fault-in all the pages. If the pages in the requested range belong to a VMA that has userfaultfd registered, handle_userfault() returns VM_FAULT_RETRY *after* user space has populated the page, but for the gup pre-fault case there's no actual retry and the caller will get no pages although they are present. This issue was uncovered when running post-copy memory restore in CRIU after d9c9ce34 ("x86/fpu: Fault-in user stack if copy_fpstate_to_sigframe() fails"). After this change, the copying of FPU state to the sigframe switched from copy_to_user() variants which caused a real page fault to get_user_pages() with pages parameter set to NULL. In post-copy mode of CRIU, the destination memory is managed with userfaultfd and lack of the retry for pre-fault case in get_user_pages() causes a crash of the restored process. Making the pre-fault behavior of get_user_pages() the same as the "normal" one fixes the issue. Link: http://lkml.kernel.org/r/1557844195-18882-1-git-send-email-rppt@linux.ibm.com Fixes: d9c9ce34 ("x86/fpu: Fault-in user stack if copy_fpstate_to_sigframe() fails") Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Tested-by: Andrei Vagin <avagin@gmail.com> [https://travis-ci.org/avagin/linux/builds/533184940] Tested-by:
Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Borislav Petkov <bp@suse.de> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Tobin C. Harding authored
If a call to kobject_init_and_add() fails we should call kobject_put() otherwise we leak memory. Add call to kobject_put() in the error path of call to kobject_init_and_add(). Please note, this has the side effect that the release method is called if kobject_init_and_add() fails. Link: http://lkml.kernel.org/r/20190513033458.2824-1-tobin@kernel.org Signed-off-by:
Tobin C. Harding <tobin@kernel.org> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jiri Slaby authored
We have a single node system with node 0 disabled: Scanning NUMA topology in Northbridge 24 Number of physical nodes 2 Skipping disabled node 0 Node 1 MemBase 0000000000000000 Limit 00000000fbff0000 NODE_DATA(1) allocated [mem 0xfbfda000-0xfbfeffff] This causes crashes in memcg when system boots: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 #PF error: [normal kernel read fault] ... RIP: 0010:list_lru_add+0x94/0x170 ... Call Trace: d_lru_add+0x44/0x50 dput.part.34+0xfc/0x110 __fput+0x108/0x230 task_work_run+0x9f/0xc0 exit_to_usermode_loop+0xf5/0x100 It is reproducible as far as 4.12. I did not try older kernels. You have to have a new enough systemd, e.g. 241 (the reason is unknown -- was not investigated). Cannot be reproduced with systemd 234. The system crashes because the size of lru array is never updated in memcg_update_all_list_lrus and the reads are past the zero-sized array, causing dereferences of random memory. The root cause are list_lru_memcg_aware checks in the list_lru code. The test in list_lru_memcg_aware is broken: it assumes node 0 is always present, but it is not true on some systems as can be seen above. So fix this by avoiding checks on node 0. Remember the memcg-awareness by a bool flag in struct list_lru. Link: http://lkml.kernel.org/r/20190522091940.3615-1-jslaby@suse.cz Fixes: 60d3fd32 ("list_lru: introduce per-memcg lists") Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Acked-by:
Michal Hocko <mhocko@suse.com> Suggested-by:
Vladimir Davydov <vdavydov.dev@gmail.com> Acked-by:
Vladimir Davydov <vdavydov.dev@gmail.com> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Chris Down authored
memory.stat and other files already consider subtrees in their output, and we should too in order to not present an inconsistent interface. The current situation is fairly confusing, because people interacting with cgroups expect hierarchical behaviour in the vein of memory.stat, cgroup.events, and other files. For example, this causes confusion when debugging reclaim events under low, as currently these always read "0" at non-leaf memcg nodes, which frequently causes people to misdiagnose breach behaviour. The same confusion applies to other counters in this file when debugging issues. Aggregation is done at write time instead of at read-time since these counters aren't hot (unlike memory.stat which is per-page, so it does it at read time), and it makes sense to bundle this with the file notifications. After this patch, events are propagated up the hierarchy: [root@ktst ~]# cat /sys/fs/cgroup/system.slice/memory.events low 0 high 0 max 0 oom 0 oom_kill 0 [root@ktst ~]# systemd-run -p MemoryMax=1 true Running as unit: run-r251162a189fb4562b9dabfdc9b0422f5.service [root@ktst ~]# cat /sys/fs/cgroup/system.slice/memory.events low 0 high 0 max 7 oom 1 oom_kill 1 As this is a change in behaviour, this can be reverted to the old behaviour by mounting with the `memory_localevents' flag set. However, we use the new behaviour by default as there's a lack of evidence that there are any current users of memory.events that would find this change undesirable. akpm: this is a behaviour change, so Cc:stable. THis is so that forthcoming distros which use cgroup v2 are more likely to pick up the revised behaviour. Link: http://lkml.kernel.org/r/20190208224419.GA24772@chrisdown.name Signed-off-by:
Chris Down <chris@chrisdown.name> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michal Koutný authored
The commit a3b609ef ("proc read mm's {arg,env}_{start,end} with mmap semaphore taken.") added synchronization of reading argument/environment boundaries under mmap_sem. Later commit 88aa7cc6 ("mm: introduce arg_lock to protect arg_start|end and env_start|end in mm_struct") avoided the coarse use of mmap_sem in similar situations. But there still remained two places that (mis)use mmap_sem. get_cmdline should also use arg_lock instead of mmap_sem when it reads the boundaries. The second place that should use arg_lock is in prctl_set_mm. By protecting the boundaries fields with the arg_lock, we can downgrade mmap_sem to reader lock (analogous to what we already do in prctl_set_mm_map). [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20190502125203.24014-3-mkoutny@suse.com Fixes: 88aa7cc6 ("mm: introduce arg_lock to protect arg_start|end and env_start|end in mm_struct") Signed-off-by:
Michal Koutný <mkoutny@suse.com> Signed-off-by:
Laurent Dufour <ldufour@linux.ibm.com> Co-developed-by:
Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by:
Cyrill Gorcunov <gorcunov@gmail.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Michal Koutný authored
Despite comment of validate_prctl_map claims there are no capability checks, it is not completely true since commit 4d28df61 ("prctl: Allow local CAP_SYS_ADMIN changing exe_file"). Extract the check out of the function and make the function perform purely arithmetic checks. This patch should not change any behavior, it is mere refactoring for following patch. [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20190502125203.24014-2-mkoutny@suse.com Signed-off-by:
Michal Koutný <mkoutny@suse.com> Reviewed-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by:
Cyrill Gorcunov <gorcunov@gmail.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kefeng Wang authored
Fix build warning, kernel/fork.c:125:5: warning: symbol 'max_threads' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20190516015118.140561-1-wangkefeng.wang@huawei.com Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Sebastian Andrzej Siewior authored
include/linux/cpumask.h: In function 'cpumask_parse': include/linux/cpumask.h:636:21: error: implicit declaration of function 'strchrnul'; did you mean 'strchr'? [-Werror=implicit-function-declaration] Because arch/arm/boot/compressed/decompress.c does #define _LINUX_STRING_H_ preventing linux/string.h from providing strchrnul. It also #includes asm/string.h, which for arm has a declaration of strchr(), explaining why this didn't use to fail. Link: http://lkml.kernel.org/r/20190528115346.f5a7kn3hdnuf5rts@linutronix.de Fixes: 3713a4e1 ("include/linux/cpumask.h: fix double string traverse in cpumask_parse") Suggested-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Yury Norov <ynorov@marvell.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Rientjes authored
CONFIG_DEBUG_SLAB_LEAK has been removed, so remove it from defconfig. Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1905201015460.96074@chino.kir.corp.google.com Fixes: 7878c231 ("slab: remove /proc/slab_allocators") Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
Reported-by:
Nicholas Joll <najoll@posteo.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Fix kernel-doc notation in lib/sort.c by using correct function parameter names. lib/sort.c:59: warning: Excess function parameter 'size' description in 'swap_words_32' lib/sort.c:83: warning: Excess function parameter 'size' description in 'swap_words_64' lib/sort.c:110: warning: Excess function parameter 'size' description in 'swap_bytes' Link: http://lkml.kernel.org/r/60e25d3d-68d1-bde2-3b39-e4baa0b14907@infradead.org Fixes: 37d0ec34 ("lib/sort: make swap functions more generic") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: George Spelvin <lkml@sdf.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Fix Sphinx warnings in Documentation/vm/hmm.rst by using "::" notation and inserting a blank line. Also add a missing ';'. Documentation/vm/hmm.rst:292: WARNING: Unexpected indentation. Documentation/vm/hmm.rst:300: WARNING: Unexpected indentation. Link: http://lkml.kernel.org/r/c5995359-7c82-4e47-c7be-b58a4dda0953@infradead.org Fixes: 023a019a ("mm/hmm: add default fault flags to avoid the need to pre-fill pfns arrays") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Jérôme Glisse <jglisse@redhat.com> Reviewed-by:
Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- May 31, 2019
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull yet more SPDX updates from Greg KH: "Here is another set of reviewed patches that adds SPDX tags to different kernel files, based on a set of rules that are being used to parse the comments to try to determine that the license of the file is "GPL-2.0-or-later" or "GPL-2.0-only". Only the "obvious" versions of these matches are included here, a number of "non-obvious" variants of text have been found but those have been postponed for later review and analysis. There is also a patch in here to add the proper SPDX header to a bunch of Kbuild files that we have missed in the past due to new files being added and forgetting that Kbuild uses two different file names for Makefiles. This issue was reported by the Kbuild maintainer. These patches have been out for review on the linux-spdx@vger mailing list, and while they were created by automatic tools, they were hand-verified by a bunc...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging and IIO driver fixes from Greg KH: "Here are some Staging and IIO driver fixes to resolve some reported problems for 5.2-rc3. Nothing major here, just some tiny changes, full details are in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'staging-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: kpc2000: Add dependency on MFD_CORE to kconfig symbol 'KPC2000' staging: wilc1000: Fix some double unlock bugs in wilc_wlan_cleanup() staging: vc04_services: prevent integer overflow in create_pagelist() Staging: vc04_services: Fix a couple error codes staging: wlan-ng: fix adapter initialization failure staging: kpc2000: double unlock in error handling in kpc_dma_transfer() staging: kpc2000: Fix build error without CONFIG_UIO staging: kpc2000: fix build error on xtensa staging: erofs: set sb->s_root to NULL when failing from __getname() iio: adc: ti-ads8688: fix timestamp is not updated in buffer iio: dac: ds4422/ds4424 fix chip verification iio: imu: mpu6050: Fix FIFO layout for ICM20602 iio: adc: ads124: avoid buffer overflow iio: adc: modify NPCM ADC read reference voltage
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are some small serial and TTY driver fixes for 5.2-rc3. Nothing major, just a number of fixes for reported issues. The fbcon core fix also resolves an issue, and was acked by the relevant maintainer to go through this tree. All of these have been in linux-next with no reported issues" * tag 'tty-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vt/fbcon: deinitialize resources in visual_init() after failed memory allocation tty: max310x: Fix external crystal register setup serial: sh-sci: disable DMA for uart_console serial: imx: remove log spamming error message tty: serial: msm_serial: Fix XON/XOFF
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some tiny USB fixes for a number of reported issues for 5.2-rc3. Nothing huge here, just a small collection of xhci and other driver bugs that syzbot has been finding in some drivers. There is also a usbip fix and a fix for the usbip fix in here :) All have been in linux-next with no reported issues" * tag 'usb-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usbip: usbip_host: fix stub_dev lock context imbalance regression media: smsusb: better handle optional alignment xhci: Use %zu for printing size_t type xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic() xhci: Fix immediate data transfer if buffer is already DMA mapped usb: xhci: avoid null pointer deref when bos field is NULL usb: xhci: Fix a potential null pointer dereference in xhci_debugfs_create_endpoint() xhci: update bounce buffer with correct sg num media: usb: siano: Fix false-positive "uninitialized variable" warning USB: rio500: update Documentation USB: rio500: simplify locking USB: rio500: fix memory leak in close after disconnect USB: rio500: refuse more than one device at a time usbip: usbip_host: fix BUG: sleeping function called from invalid context USB: sisusbvga: fix oops in error path of sisusb_probe USB: Add LPM quirk for Surface Dock GigE adapter media: usb: siano: Fix general protection fault in smsusb usb: mtu3: fix up undefined reference to usb_debug_root USB: Fix slab-out-of-bounds write in usb_get_bos_descriptor
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Nothing too crazy, pretty quiet, maybe too quiet. amdgpu: - a fixed version of the raven firmware fix we previously reverted - stolen memory fix imx: - regression fix qxl: - remove a bad warning etnaviv: - VM locking fix" * tag 'drm-fixes-2019-05-31' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: reserve stollen vram for raven series drm/etnaviv: lock MMU while dumping core drm/imx: ipuv3-plane: fix atomic update status query for non-plus i.MX6Q drm/qxl: drop WARN_ONCE() drm/amd/display: Don't load DMCU for Raven 1 (v2)
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix OOPS during nf_tables rule dump, from Florian Westphal. 2) Use after free in ip_vs_in, from Yue Haibing. 3) Fix various kTLS bugs (NULL deref during device removal resync, netdev notification ignoring, etc.) From Jakub Kicinski. 4) Fix ipv6 redirects with VRF, from David Ahern. 5) Memory leak fix in igmpv3_del_delrec(), from Eric Dumazet. 6) Missing memory allocation failure check in ip6_ra_control(), from Gen Zhang. And likewise fix ip_ra_control(). 7) TX clean budget logic error in aquantia, from Igor Russkikh. 8) SKB leak in llc_build_and_send_ui_pkt(), from Eric Dumazet. 9) Double frees in mlx5, from Parav Pandit. 10) Fix lost MAC address in r8169 during PCI D3, from Heiner Kallweit. 11) Fix botched register access in mvpp2, from Antoine Tenart. 12) Use after free in napi_gro_frags(), from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (89 commits) net: correct zerocopy refcnt with udp MSG_MORE ethtool: Check for vlan etype or vlan tci when parsing flow_rule net: don't clear sock->sk early to avoid trouble in strparser net-gro: fix use-after-free read in napi_gro_frags() net: dsa: tag_8021q: Create a stable binary format net: dsa: tag_8021q: Change order of rx_vid setup net: mvpp2: fix bad MVPP2_TXQ_SCHED_TOKEN_CNTR_REG queue value ipv4: tcp_input: fix stack out of bounds when parsing TCP options. mlxsw: spectrum: Prevent force of 56G mlxsw: spectrum_acl: Avoid warning after identical rules insertion net: dsa: mv88e6xxx: fix handling of upper half of STATS_TYPE_PORT r8169: fix MAC address being lost in PCI D3 net: core: support XDP generic on stacked devices. netvsc: unshare skb in VF rx handler udp: Avoid post-GRO UDP checksum recalculation net: phy: dp83867: Set up RGMII TX delay net: phy: dp83867: do not call config_init twice net: phy: dp83867: increase SGMII autoneg timer duration net: phy: dp83867: fix speed 10 in sgmii mode net: phy: marvell10g: report if the PHY fails to boot firmware ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "The fixes are still trickling in for arm64, but the only really significant one here is actually fixing a regression in the botched module relocation range checking merged for -rc2. Hopefully we've nailed it this time. - Fix implementation of our set_personality() system call, which wasn't being wrapped properly - Fix system call function types to keep CFI happy - Fix siginfo layout when delivering SIGKILL after a kernel fault - Really fix module relocation range checking" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: use the correct function type for __arm64_sys_ni_syscall arm64: use the correct function type in SYSCALL_DEFINE0 arm64: fix syscall_fn_t type signal/arm64: Use force_sig not force_sig_fault for SIGKILL arm64/module: revert to unsigned interpretation of ABS16/32 relocations arm64: Fix the arm64_personality() syscall wrapper redirection
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "A few more fixes for bugs reported by users, fuzzing tools and regressions: - fix crashes in relocation: + resuming interrupted balance operation does not properly clean up orphan trees + with enabled qgroups, resuming needs to be more careful about block groups due to limited context when updating qgroups - fsync and logging fixes found by fuzzing - incremental send fixes for no-holes and clone - fix spin lock type used in timer function for zstd" * tag 'for-5.2-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix race updating log root item during fsync Btrfs: fix wrong ctime and mtime of a directory after log replay Btrfs: fix fsync not persisting changed attributes of a directory btrfs: qgroup: Check bg while resuming relocation to avoid NULL pointer dereference btrfs: reloc: Also queue orphan reloc tree for cleanup to avoid BUG_ON() Btrfs: incremental send, fix emission of invalid clone operations Btrfs: incremental send, fix file corruption when no-holes feature is enabled btrfs: correct zstd workspace manager lock to use spin_lock_bh() btrfs: Ensure replaced device doesn't have pending chunk allocation
-
git://git.infradead.org/users/hch/configfsLinus Torvalds authored
Pull configs fix from Christoph Hellwig: - fix a use after free in configfs_d_iput (Sahitya Tummala) * tag 'configfs-for-5.2-2' of git://git.infradead.org/users/hch/configfs: configfs: Fix use-after-free when accessing sd->s_dentry
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "No big surprises here, just a few device-specific fixes. HD-audio received several fixes for Acer, Dell, Huawei and other laptops as well as the workaround for the new Intel chipset. One significant one-liner fix is the disablement of the node-power saving on Realtek codecs, which may potentially cover annoying bugs like the background noises or click noises on many devices. Other than that, a fix for FireWire bit definitions, and another fix for LINE6 USB audio bug that was discovered by syzkaller" * tag 'sound-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: fireface: Use ULL suffixes for 64-bit constants ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops ALSA: line6: Assure canceling delayed work at disconnection ALSA: hda - Force polling mode on CNL for fixing codec communication ALSA: hda/realtek - Enable m...
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk driver fixes from Stephen Boyd: - Don't expose the SiFive clk driver on non-RISCV architectures - Fix some bits describing clks in the imx8mm driver - Always call clk domain code in the TI driver so non-legacy platforms work * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: ti: clkctrl: Fix clkdm_clk handling clk: imx: imx8mm: fix int pll clk gate clk: sifive: restrict Kconfig scope for the FU540 PRCI driver
-
git://git.pengutronix.de/git/pza/linuxDave Airlie authored
drm/imx: ipuv3-plane: fix frame rate regression on non-plus i.MX6Q Fix a regression introduced by 70e8a0c7 ("drm/imx: ipuv3-plane: add function to query atomic update status") that halves the frame rate on non-plus i.MX6Q, because the pending check always returns "pending" even if an update is actually applied. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/1559128738.3651.4.camel@pengutronix.de
-
Willem de Bruijn authored
TCP zerocopy takes a uarg reference for every skb, plus one for the tcp_sendmsg_locked datapath temporarily, to avoid reaching refcnt zero as it builds, sends and frees skbs inside its inner loop. UDP and RAW zerocopy do not send inside the inner loop so do not need the extra sock_zerocopy_get + sock_zerocopy_put pair. Commit 52900d22288ed ("udp: elide zerocopy operation in hot path") introduced extra_uref to pass the initial reference taken in sock_zerocopy_alloc to the first generated skb. But, sock_zerocopy_realloc takes this extra reference at the start of every call. With MSG_MORE, no new skb may be generated to attach the extra_uref to, so refcnt is incorrectly 2 with only one skb. Do not take the extra ref if uarg && !tcp, which implies MSG_MORE. Update extra_uref accordingly. This conditional assignment triggers a false positive may be used uninitialized warning, so have to initialize extra_uref at define. Changes v1->v2: fix typo in Fixes SHA1 Fixes: 52900d22 ("udp: elide zerocopy operation in hot path") Reported-by:
syzbot <syzkaller@googlegroups.com> Diagnosed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
When parsing an ethtool flow spec to build a flow_rule, the code checks if both the vlan etype and the vlan tci are specified by the user to add a FLOW_DISSECTOR_KEY_VLAN match. However, when the user only specified a vlan etype or a vlan tci, this check silently ignores these parameters. For example, the following rule : ethtool -N eth0 flow-type udp4 vlan 0x0010 action -1 loc 0 will result in no error being issued, but the equivalent rule will be created and passed to the NIC driver : ethtool -N eth0 flow-type udp4 action -1 loc 0 In the end, neither the NIC driver using the rule nor the end user have a way to know that these keys were dropped along the way, or that incorrect parameters were entered. This kind of check should be left to either the driver, or the ethtool flow spec layer. This commit makes so that ethtool parameters are forwarded as-is to the NIC driver. Since none of the users of ethtool_rx_flow_rule_create are using the VLAN dissector, I don't think this qualifies as a regression. Fixes: eca4205f ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Acked-by:
Pablo Neira Ayuso <pablo@gnumonks.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
af_inet sets sock->sk to NULL which trips strparser over: BUG: kernel NULL pointer dereference, address: 0000000000000012 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 7 PID: 0 Comm: swapper/7 Not tainted 5.2.0-rc1-00139-g14629453a6d3 #21 RIP: 0010:tcp_peek_len+0x10/0x60 RSP: 0018:ffffc02e41c54b98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9cf924c4e030 RCX: 0000000000000051 RDX: 0000000000000000 RSI: 000000000000000c RDI: ffff9cf97128f480 RBP: ffff9cf9365e0300 R08: ffff9cf94fe7d2c0 R09: 0000000000000000 R10: 000000000000036b R11: ffff9cf939735e00 R12: ffff9cf91ad9ae40 R13: ffff9cf924c4e000 R14: ffff9cf9a8fcbaae R15: 0000000000000020 FS: 0000000000000000(0000) GS:ffff9cf9af7c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000012 CR3: 000000013920a003 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> strp_data_ready+0x48/0x90 tls_data_ready+0x22/0xd0 [tls] tcp_rcv_established+0x569/0x620 tcp_v4_do_rcv+0x127/0x1e0 tcp_v4_rcv+0xad7/0xbf0 ip_protocol_deliver_rcu+0x2c/0x1c0 ip_local_deliver_finish+0x41/0x50 ip_local_deliver+0x6b/0xe0 ? ip_protocol_deliver_rcu+0x1c0/0x1c0 ip_rcv+0x52/0xd0 ? ip_rcv_finish_core.isra.20+0x380/0x380 __netif_receive_skb_one_core+0x7e/0x90 netif_receive_skb_internal+0x42/0xf0 napi_gro_receive+0xed/0x150 nfp_net_poll+0x7a2/0xd30 [nfp] ? kmem_cache_free_bulk+0x286/0x310 net_rx_action+0x149/0x3b0 __do_softirq+0xe3/0x30a ? handle_irq_event_percpu+0x6a/0x80 irq_exit+0xe8/0xf0 do_IRQ+0x85/0xd0 common_interrupt+0xf/0xf </IRQ> RIP: 0010:cpuidle_enter_state+0xbc/0x450 To avoid this issue set sock->sk after sk_prot->close. My grepping and testing did not discover any code which would depend on the current behaviour. Fixes: c46234eb ("tls: RX path for ktls") Reported-by:
David Beckett <david.beckett@netronome.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
If a network driver provides to napi_gro_frags() an skb with a page fragment of exactly 14 bytes, the call to gro_pull_from_frag0() will 'consume' the fragment by calling skb_frag_unref(skb, 0), and the page might be freed and reused. Reading eth->h_proto at the end of napi_frags_skb() might read mangled data, or crash under specific debugging features. BUG: KASAN: use-after-free in napi_frags_skb net/core/dev.c:5833 [inline] BUG: KASAN: use-after-free in napi_gro_frags+0xc6f/0xd10 net/core/dev.c:5841 Read of size 2 at addr ffff88809366840c by task syz-executor599/8957 CPU: 1 PID: 8957 Comm: syz-executor599 Not tainted 5.2.0-rc1+ #32 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 kasan_report+0x12/0x20 mm/kasan/common.c:614 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:142 napi_frags_skb net/core/dev.c:5833 [inline] napi_gro_frags+0xc6f/0xd10 net/core/dev.c:5841 tun_get_user+0x2f3c/0x3ff0 drivers/net/tun.c:1991 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2037 call_write_iter include/linux/fs.h:1872 [inline] do_iter_readv_writev+0x5f8/0x8f0 fs/read_write.c:693 do_iter_write fs/read_write.c:970 [inline] do_iter_write+0x184/0x610 fs/read_write.c:951 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1015 do_writev+0x15b/0x330 fs/read_write.c:1058 Fixes: a50e233c ("net-gro: restore frag0 optimization") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Vladimir Oltean says: ==================== Fixes for DSA tagging using 802.1Q During the prototyping for the "Decoupling PHYLINK from struct net_device" patchset, the CPU port of the sja1105 driver was moved to a different spot. This uncovered an issue in the tag_8021q DSA code, which used to work by mistake - the CPU port was the last hardware port numerically, and this was masking an ordering issue which is very likely to be seen in other drivers that make use of 802.1Q tags. A question was also raised whether the VID numbers bear any meaning, and the conclusion was that they don't, at least not in an absolute sense. The second patch defines bit fields inside the DSA 802.1Q VID so that tcpdump can decode it unambiguously (although the meaning is now clear even by visual inspection). ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Tools like tcpdump need to be able to decode the significance of fake VLAN headers that DSA uses to separate switch ports. But currently these have no global significance - they are simply an ordered list of DSA_MAX_SWITCHES x DSA_MAX_PORTS numbers ending at 4095. The reason why this is submitted as a fix is that the existing mapping of VIDs should not enter into a stable kernel, so we can pretend that only the new format exists. This way tcpdump won't need to try to make something out of the VLAN tags on 5.2 kernels. Fixes: f9bbe447 ("net: dsa: Optional VLAN-based port separation for switches without tagging") Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
The 802.1Q tagging performs an unbalanced setup in terms of RX VIDs on the CPU port. For the ingress path of a 802.1Q switch to work, the RX VID of a port needs to be seen as tagged egress on the CPU port. While configuring the other front-panel ports to be part of this VID, for bridge scenarios, the untagged flag is applied even on the CPU port in dsa_switch_vlan_add. This happens because DSA applies the same flags on the CPU port as on the (bridge-controlled) slave ports, and the effect in this case is that the CPU port tagged settings get deleted. Instead of fixing DSA by introducing a way to control VLAN flags on the CPU port (and hence stop inheriting from the slave ports) - a hard, perhaps intractable problem - avoid this situation by moving the setup part of the RX VID on the CPU port after all the other front-panel ports have been added to the VID. Fixes: f9bbe447 ("net: dsa: Optional VLAN-based port separation for switches without tagging") Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Antoine Tenart authored
MVPP2_TXQ_SCHED_TOKEN_CNTR_REG() expects the logical queue id but the current code is passing the global tx queue offset, so it ends up writing to unknown registers (between 0x8280 and 0x82fc, which seemed to be unused by the hardware). This fixes the issue by using the logical queue id instead. Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Young Xiao authored
The TCP option parsing routines in tcp_parse_options function could read one byte out of the buffer of the TCP options. 1 while (length > 0) { 2 int opcode = *ptr++; 3 int opsize; 4 5 switch (opcode) { 6 case TCPOPT_EOL: 7 return; 8 case TCPOPT_NOP: /* Ref: RFC 793 section 3.1 */ 9 length--; 10 continue; 11 default: 12 opsize = *ptr++; //out of bound access If length = 1, then there is an access in line2. And another access is occurred in line 12. This would lead to out-of-bound access. Therefore, in the patch we check that the available data length is larger enough to pase both TCP option code and size. Signed-off-by:
Young Xiao <92siuyang@gmail.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Two small fixes Patch #1 from Jiri fixes an issue specific to Spectrum-2 where the insertion of two identical flower filters with different priorities would trigger a warning. Patch #2 from Amit prevents the driver from trying to configure a port with a speed of 56Gb/s and autoneg off as this is not supported and results in error messages from firmware. Please consider patch #1 for stable. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amit Cohen authored
Force of 56G is not supported by hardware in Ethernet devices. This configuration fails with a bad parameter error from firmware. Add check of this case. Instead of trying to set 56G with autoneg off, return a meaningful error. Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by:
Amit Cohen <amitc@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
When identical rules are inserted, the latter one goes to C-TCAM. For that, a second eRP with the same mask is created. These 2 eRPs by the nature cannot be merged and also one cannot be parent of another. Teach mlxsw_sp_acl_erp_delta_fill() about this possibility and handle it gracefully. Reported-by:
Alex Kushnarov <alexanderk@mellanox.com> Fixes: c22291f7 ("mlxsw: spectrum: acl: Implement delta for ERP") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rasmus Villemoes authored
Currently, the upper half of a 4-byte STATS_TYPE_PORT statistic ends up in bits 47:32 of the return value, instead of bits 31:16 as they should. Fixes: 6e46e2d8 ("net: dsa: mv88e6xxx: Fix u64 statistics") Signed-off-by:
Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
(At least) RTL8168e forgets its MAC address in PCI D3. To fix this set the MAC address when resuming. For resuming from runtime-suspend we had this in place already, for resuming from S3/S5 it was missing. The commit referenced as being fixed isn't wrong, it's just the first one where the patch applies cleanly. Fixes: 0f07bd85 ("r8169: use dev_get_drvdata where possible") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reported-by:
Albert Astals Cid <aacid@kde.org> Tested-by:
Albert Astals Cid <aacid@kde.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-05-28 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.13: ('net/mlx5: Allocate root ns memory using kzalloc to match kfree') For -stable v4.16: ('net/mlx5: Avoid double free in fs init error unwinding path') For -stable v4.18: ('net/mlx5e: Disable rxhash when CQE compress is enabled') ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Greg Kroah-Hartman authored
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0 Reported-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-