- Apr 10, 2015
-
-
Thierry Reding authored
The current parent, plld_out0, does not exist. The proper name is pll_d_out0. While at it, rename the plld_dsi clock to pll_d_dsi_out to be more consistent with other clock names. Fixes: b270491e ("clk: tegra: Define PLLD_DSI and remove dsia(b)_mux") Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
There is no reason why Tegra114 cannot use the same generic code to set up the oscillator, clk_m and pll_ref clocks. The only effective change that this causes is that the CLK_SET_PARENT_RATE flag is dropped, but since these clocks are all fixed it is not needed anyway. Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
Currently the Tegra clock driver simplifies the clock tree somewhat by taking advantage of the fact that clk_m runs at the same frequency as the oscillator. While that's true on all currently supported SoCs, it does not apply to Tegra210 anymore. On Tegra210 clk_m is typically divided down from the oscillator frequency. To support that setup, add a separate clock for the oscillator that both clk_m and pll_ref derive from. Modify the tegra_osc_clk_init() function to take an additional divider parameter for clk_m. Existing SoCs always pass in 1, whereas Tegra210 will read the divider from a register in the clock & reset controller. Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
Tegra210 has an extra bank of peripheral clock registers. Add it to the generic peripheral clock code. Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Reviewed-by:
Paul Walmsley <paul@pwsan.com> Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The number of resets controls is 32 times the number of peripheral register banks rather than 32 times the number of clocks. This reduces (drastically) the number of reset controls registered from 10080 (315 clocks * 32) to 224 (6 peripheral register banks * 32). This also fixes a potential crash because trying to use any of the excess reset controls (224-10079) would have caused accesses beyond the array bounds of the peripheral register banks definition array. Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Fixes: 6d5b988e ("clk: tegra: implement a reset driver") Cc: stable@vger.kernel.org # 3.14+ Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The ret variable is often explicitly initialized to 0, but there is no need to do so in many cases because it will immediately be overwritten with the return value from a function. Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
Some of the .dev_id entries in the devclks table were oddly indented. Make them consistent with the rest of the table. Reviewed-by:
Paul Walmsley <paul@pwsan.com> Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
Make usage of blank lines as separators more consistent. Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Dylan Reid authored
Add the clocks used for HDMI audio played through the HDA controller. Initialize the codec clock to 48Mhz and the HDA clock to 102MHz per the TRM. Signed-off-by:
Dylan Reid <dgreid@chromium.org> Acked-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The second to last parameter of the TEGRA_CLK_PERIPH macro denotes a table and should therefore users should pass in NULL instead of 0. Fixes a bunch of sparse warnings like this: warning: Using plain integer as NULL pointer Reviewed-by:
Paul Walmsley <paul@pwsan.com> Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The clock initialization structure is named struct clk_init_table. Update the kerneldoc comment to use the correct name. Reviewed-by:
Paul Walmsley <paul@pwsan.com> Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
- Feb 23, 2015
-
-
Linus Torvalds authored
.. after extensive statistical analysis of my G+ polling, I've come to the inescapable conclusion that internet polls are bad. Big surprise. But "Hurr durr I'ma sheep" trounced "I like online polls" by a 62-to-38% margin, in a poll that people weren't even supposed to participate in. Who can argue with solid numbers like that? 5,796 votes from people who can't even follow the most basic directions? In contrast, "v4.0" beat out "v3.20" by a slimmer margin of 56-to-44%, but with a total of 29,110 votes right now. Now, arguably, that vote spread is only about 3,200 votes, which is less than the almost six thousand votes that the "please ignore" poll got, so it could be considered noise. But hey, I asked, so I'll honor the votes.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Ext4 bug fixes. We also reserved code points for encryption and read-only images (for which the implementation is mostly just the reserved code point for a read-only feature :-)" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix indirect punch hole corruption ext4: ignore journal checksum on remount; don't fail ext4: remove duplicate remount check for JOURNAL_CHECKSUM change ext4: fix mmap data corruption in nodelalloc mode when blocksize < pagesize ext4: support read-only images ext4: change to use setup_timer() instead of init_timer() ext4: reserve codepoints used by the ext4 encryption feature jbd2: complain about descriptor block checksum errors
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more vfs updates from Al Viro: "Assorted stuff from this cycle. The big ones here are multilayer overlayfs from Miklos and beginning of sorting ->d_inode accesses out from David" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (51 commits) autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation procfs: fix race between symlink removals and traversals debugfs: leave freeing a symlink body until inode eviction Documentation/filesystems/Locking: ->get_sb() is long gone trylock_super(): replacement for grab_super_passive() fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry) SELinux: Use d_is_positive() rather than testing dentry->d_inode Smack: Use d_is_positive() rather than testing dentry->d_inode TOMOYO: Use d_is_dir() rather than d_inode and S_ISDIR() Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb VFS: Split DCACHE_FILE_TYPE into regular and special types VFS: Add a fallthrough flag for marking virtual dentries VFS: Add a whiteout dentry type VFS: Introduce inode-getting helpers for layered/unioned fs environments Infiniband: Fix potential NULL d_inode dereference posix_acl: fix reference leaks in posix_acl_create autofs4: Wrong format for printing dentry ...
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fix from Russell King: "Just one fix this time around. __iommu_alloc_buffer() can cause a BUG() if dma_alloc_coherent() is called with either __GFP_DMA32 or __GFP_HIGHMEM set. The patch from Alexandre addresses this" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8305/1: DMA: Fix kzalloc flags in __iommu_alloc_buffer()
-
Al Viro authored
X-Coverup: just ask spender Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
use_pde()/unuse_pde() in ->follow_link()/->put_link() resp. Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
As it is, we have debugfs_remove() racing with symlink traversals. Supply ->evict_inode() and do freeing there - inode will remain pinned until we are done with the symlink body. And rip the idiocy with checking if dentry is positive right after we'd verified debugfs_positive(), which is a stronger check... Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Konstantin Khlebnikov authored
I've noticed significant locking contention in memory reclaimer around sb_lock inside grab_super_passive(). Grab_super_passive() is called from two places: in icache/dcache shrinkers (function super_cache_scan) and from writeback (function __writeback_inodes_wb). Both are required for progress in memory allocator. Grab_super_passive() acquires sb_lock to increment sb->s_count and check sb->s_instances. It seems sb->s_umount locked for read is enough here: super-block deactivation always runs under sb->s_umount locked for write. Protecting super-block itself isn't a problem: in super_cache_scan() sb is protected by shrinker_rwsem: it cannot be freed if its slab shrinkers are still active. Inside writeback super-block comes from inode from bdi writeback list under wb->list_lock. This patch removes locking sb_lock and checks s_instances under s_umount: generic_shutdown_super() unlinks it under sb->s_umount locked for write. New variant is called trylock_super() and since it only locks semaphore, callers must call up_read(&sb->s_umount) instead of drop_super(sb) when they're done. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Fanotify probably doesn't want to watch autodirs so make it use d_can_lookup() rather than d_is_dir() when checking a dir watch and give an error on fake directories. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Fix up the following scripted S_ISDIR/S_ISREG/S_ISLNK conversions (or lack thereof) in cachefiles: (1) Cachefiles mostly wants to use d_can_lookup() rather than d_is_dir() as it doesn't want to deal with automounts in its cache. (2) Coccinelle didn't find S_IS* expressions in ASSERT() statements in cachefiles. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a negative dentry to a lower layer. In such a case, the dentry type of the negative union dentry is set to the same as the type of the lower dentry. However, if you know d_inode is not NULL at the call site, then you can use the d_is_xxx() functions even in a filesystem. There is one further complication: a 0,0 chardev dentry may be labelled DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was intended for special directory entry types that don't have attached inodes. The following perl+coccinelle script was used: use strict; my @callers; open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') || die "Can't grep for S_ISDIR and co. callers"; @callers = <$fd>; close($fd); unless (@callers) { print "No matches\n"; exit(0); } my @cocci = ( '@@', 'expression E;', '@@', '', '- S_ISLNK(E->d_inode->i_mode)', '+ d_is_symlink(E)', '', '@@', 'expression E;', '@@', '', '- S_ISDIR(E->d_inode->i_mode)', '+ d_is_dir(E)', '', '@@', 'expression E;', '@@', '', '- S_ISREG(E->d_inode->i_mode)', '+ d_is_reg(E)' ); my $coccifile = "tmp.sp.cocci"; open($fd, ">$coccifile") || die $coccifile; print($fd "$_\n") || die $coccifile foreach (@cocci); close($fd); foreach my $file (@callers) { chomp $file; print "Processing ", $file, "\n"; system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 || die "spatch failed"; } [AV: overlayfs parts skipped] Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Use d_is_positive() rather than testing dentry->d_inode in SELinux to get rid of direct references to d_inode outside of the VFS. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Use d_is_positive() rather than testing dentry->d_inode in Smack to get rid of direct references to d_inode outside of the VFS. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Use d_is_dir() rather than d_inode and S_ISDIR(). Note that this will include fake directories such as automount triggers. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Use d_is_positive(dentry) or d_is_negative(dentry) rather than testing dentry->d_inode as the dentry may cover another layer that has an inode when the top layer doesn't or may hold a 0,0 chardev that's actually a whiteout. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
mediated_filesystem() should use dentry->d_sb not dentry->d_inode->i_sb and should avoid file_inode() also since it is really dealing with the path. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Split DCACHE_FILE_TYPE into DCACHE_REGULAR_TYPE (dentries representing regular files) and DCACHE_SPECIAL_TYPE (representing blockdev, chardev, FIFO and socket files). d_is_reg() and d_is_special() are added to detect these subtypes and d_is_file() is left as the union of the two. This allows a number of places that use S_ISREG(dentry->d_inode->i_mode) to use d_is_reg(dentry) instead. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Add a DCACHE_FALLTHRU flag to indicate that, in a layered filesystem, this is a virtual dentry that covers another one in a lower layer that should be used instead. This may be recorded on medium if directory integration is stored there. The flag can be set with d_set_fallthru() and tested with d_is_fallthru(). Original-author: Valerie Aurora <vaurora@redhat.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Add DCACHE_WHITEOUT_TYPE and provide a d_is_whiteout() accessor function. A d_is_miss() accessor is also added for ordinary cache misses and d_is_negative() is modified to indicate either an ordinary miss or an enforced miss (whiteout). Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
David Howells authored
Introduce some function for getting the inode (and also the dentry) in an environment where layered/unioned filesystems are in operation. The problem is that we have places where we need *both* the union dentry and the lower source or workspace inode or dentry available, but we can only have a handle on one of them. Therefore we need to derive the handle to the other from that. The idea is to introduce an extra field in struct dentry that allows the union dentry to refer to and pin the lower dentry. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
- Feb 22, 2015
-
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS: - a number of fixes that didn't make the 3.19 release. - a number of cleanups. - preliminary support for Cavium's Octeon 3 SOCs which feature up to 48 MIPS64 R3 cores with FPU and hardware virtualization. - support for MIPS R6 processors. Revision 6 of the MIPS architecture is a major revision of the MIPS architecture which does away with many of original sins of the architecture such as branch delay slots. This and other changes in R6 require major changes throughout the entire MIPS core architecture code and make up for the lion share of this pull request. - finally some preparatory work for eXtendend Physical Address support, which allows support of up to 40 bit of physical address space on 32 bit processors" [ Ahh, MIPS can't leave the PAE brain damage alone. It's like every CPU architect has to make that mistake, but pee in the snow by changing the TLA. But whether it's called PAE, LPAE or XPA, it's horrid crud - Linus ] * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (114 commits) MIPS: sead3: Corrected get_c0_perfcount_int MIPS: mm: Remove dead macro definitions MIPS: OCTEON: irq: add CIB and other fixes MIPS: OCTEON: Don't do acknowledge operations for level triggered irqs. MIPS: OCTEON: More OCTEONIII support MIPS: OCTEON: Remove setting of processor specific CVMCTL icache bits. MIPS: OCTEON: Core-15169 Workaround and general CVMSEG cleanup. MIPS: OCTEON: Update octeon-model.h code for new SoCs. MIPS: OCTEON: Implement DCache errata workaround for all CN6XXX MIPS: OCTEON: Add little-endian support to asm/octeon/octeon.h MIPS: OCTEON: Implement the core-16057 workaround MIPS: OCTEON: Delete unused COP2 saving code MIPS: OCTEON: Use correct instruction to read 64-bit COP0 register MIPS: OCTEON: Save and restore CP2 SHA3 state MIPS: OCTEON: Fix FP context save. MIPS: OCTEON: Save/Restore wider multiply registers in OCTEON III CPUs MIPS: boot: Provide more uImage options MIPS: Remove unneeded #ifdef __KERNEL__ from asm/processor.h MIPS: ip22-gio: Remove legacy suspend/resume support mips: pci: Add ifdef around pci_proc_domain ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "A few fixes that came in too late to make it into the first set of pull requests but would still be nice to have in -rc1. The majority of these are trivial build fixes for bugs that I found myself using randconfig testing, and a set of two patches from Uwe to mark DT strings as 'const' where appropriate, to resolve inconsistent section attributes" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: make of_device_ids const ARM: make arrays containing machine compatible strings const ARM: mm: Remove Kconfig symbol CACHE_PL310 ARM: rockchip: force built-in regulator support for PM ARM: mvebu: build armada375-smp code conditionally ARM: sti: always enable RESET_CONTROLLER ARM: rockchip: make rockchip_suspend_init conditional ARM: ixp4xx: fix {in,out}s{bwl} data types ARM: prima2: do not select SMP_ON_UP ARM: at91: fix pm declarations ARM: davinci: multi-soc kernels require AUTO_ZRELADDR ARM: davinci: davinci_cfg_reg cannot be init ARM: BCM: put back ARCH_MULTI_V7 dependency for mobile ARM: vexpress: use ARM_CPU_SUSPEND if needed ARM: dts: add I2C device nodes for Broadcom Cygnus ARM: dts: BCM63xx: fix L2 cache properties
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull misc SCSI patches from James Bottomley: "This is a short patch set representing a couple of left overs from the merge window (debug removal and MAINTAINER changes). Plus one merge window regression (the local workqueue for hpsa) and a set of bug fixes for several issues (two for scsi-mq and the rest an assortment of long standing stuff, all cc'd to stable)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: sg: fix EWOULDBLOCK errors with scsi-mq sg: fix unkillable I/O wait deadlock with scsi-mq sg: fix read() error reporting wd719x: add missing .module to wd719x_template hpsa: correct compiler warnings introduced by hpsa-add-local-workqueue patch fixed invalid assignment of 64bit mask to host dma_boundary for scatter gather segment boundary limit. fcoe: Transition maintainership to Vasu am53c974: remove left-over debugging code
-
Linus Torvalds authored
Merge tag 'xfs-pnfs-for-linus-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs pnfs block layout support from Dave Chinner: "This contains the changes to XFS needed to support the PNFS block layout server that you pulled in through Bruce's NFS server tree merge. I originally thought that I'd need to merge changes into the NFS server side, but Bruce had already picked them up and so this is purely changes to the fs/xfs/ codebase. Summary: This update contains the implementation of the PNFS server export methods that enable use of XFS filesystems as a block layout target" * tag 'xfs-pnfs-for-linus-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: recall pNFS layouts on conflicting access xfs: implement pNFS export operations
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull more NFS client updates from Trond Myklebust: "Highlights include: - Fix a use-after-free in decode_cb_sequence_args() - Fix a compile error when #undef CONFIG_PROC_FS - NFSv4.1 backchannel spinlocking issue - Cleanups in the NFS unstable write code requested by Linus - NFSv4.1 fix issues when the server denies our backchannel request - Cleanups in create_session and bind_conn_to_session" * tag 'nfs-for-3.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4.1: Clean up bind_conn_to_session NFSv4.1: Always set up a forward channel when binding the session NFSv4.1: Don't set up a backchannel if the server didn't agree to do so NFSv4.1: Clean up create_session pnfs: Refactor the *_layout_mark_request_commit to use pnfs_layout_mark_request_commit NFSv4: Kill unused nfs_inode->delegation_state field NFS: struct nfs_commit_info.lock must always point to inode->i_lock nfs: Can call nfs_clear_page_commit() instead nfs: Provide and use helper functions for marking a page as unstable SUNRPC: Always manipulate rpc_rqst::rq_bc_pa_list under xprt->bc_pa_lock SUNRPC: Fix a compile error when #undef CONFIG_PROC_FS NFSv4.1: Convert open-coded array allocation calls to kmalloc_array() NFSv4.1: Fix a kfree() of uninitialised pointers in decode_cb_sequence_args
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull one more batch of power management and ACPI updates from Rafael Wysocki: "These are mostly fixes on top of the previously merged recent PM and ACPI material. First, one commit that broke the ACPI LPSS (Low-Power Subsystem) driver on a Dell box is reverted and there are two stable-candidate fixes for that driver. Another fix cleans up two recently added ACPI EC messages that look odd and the printk level of a noisy debug message in the core ACPI resources handling code is reduced. In addition to that we have two stable-candidate fixes for the s3c cpufreq driver, two cpuidle powernv driver updates related to Device Trees and a PNP subsystem cleanup that will allow us to get rid of some old ugliness going forward. Also there is a new blacklist entry for the ACPI backlight code. Specifics: - Revert a recent ACPI LPSS driver commit that prevented the touchpad driver from loading on Dell XPS13 (Jarkko Nikula). - Make the ACPI LPSS driver disable the I2C controllers and deassert SPI host controllers resets at startup on Intel BayTrail and Braswell SoCs in case they have been left in wrong states by the platform firmware which then may casuse fatal controller driver failures during resume from hibernation (Mika Westerberg). - Make two recently added ACPI EC messages look better (Scot Doyle). - Reduce the printk level of a recently added debug message related to ACPI resources that may become noisy in some cases (Rafael J Wysocki). - Add a new ACPI backlight blacklist entry for Samsung Series 9 (900X3C/900X3D/900X3E/900X4C/900X4D) laptops where the native backlight interface doesn't work while the ACPI based one does (Jens Reyer). - Make the PNP sybsystem's core code use __request_region() followed by __release_region() instead of __check_region() which then will allow us to get rid of the latter as it has no more users (Jakub Sitnicki). - Fix a build breakage and an issue with two __init functions that may be called after initialization in the s3c cpufreq driver (Arnd Bergmann). - Make the powernv cpuidle driver read target_residency values for idle states from a Device Tree (as we have the suitable DT bindings for that now) and improve the parsing of the powermgmt DT node in that driver (Preeti U Murthy)" * tag 'pm+acpi-3.20-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: powernv: Avoid endianness conversions while parsing DT cpufreq: s3c: remove last use of resume_clocks callback cpufreq: s3c: remove incorrect __init annotations ACPI / LPSS: Deassert resets for SPI host controllers on Braswell ACPI / LPSS: Always disable I2C host controllers ACPI / resources: Change pr_info() to pr_debug() for debug information ACPI / video: Disable native backlight on Samsung Series 9 laptops cpuidle: powernv: Read target_residency value of idle states from DT if available Revert "ACPI / LPSS: Remove non-existing clock control from Intel Lynxpoint I2C" ACPI / EC: Remove non-standard log emphasis PNP: Switch from __check_region() to __request_region()
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull followup block layer updates from Jens Axboe: "Two things in this pull request: - A block throttle oops fix (marked for stable) from Thadeu. - The NVMe fixes/features queued up for 3.20, but merged later in the process. From Keith. We should have gotten this merged earlier, we're ironing out the kinks in the process. Will be ready for the initial pull next series" * 'for-linus' of git://git.kernel.dk/linux-block: blk-throttle: check stats_cpu before reading it from sysfs NVMe: Fix potential corruption on sync commands NVMe: Remove unused variables NVMe: Fix scsi mode select llbaa setting NVMe: Fix potential corruption during shutdown NVMe: Asynchronous controller probe NVMe: Register management handle under nvme class NVMe: Update SCSI Inquiry VPD 83h translation NVMe: Metadata format support
-
Linus Torvalds authored
Merge tag 'dm-3.20-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull more device mapper changes from Mike Snitzer: - Significant dm-crypt CPU scalability performance improvements thanks to changes that enable effective use of an unbound workqueue across all available CPUs. A large battery of tests were performed to validate these changes, summary of results is available here: https://www.redhat.com/archives/dm-devel/2015-February/msg00106.html - A few additional stable fixes (to DM core, dm-snapshot and dm-mirror) and a small fix to the dm-space-map-disk. * tag 'dm-3.20-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm snapshot: fix a possible invalid memory access on unload dm: fix a race condition in dm_get_md dm crypt: sort writes dm crypt: add 'submit_from_crypt_cpus' option dm crypt: offload writes to thread dm crypt: remove unused io_pool and _crypt_io_pool dm crypt: avoid deadlock in mempools dm crypt: don't allocate pages for a partial request dm crypt: use unbound workqueue for request processing dm io: reject unsupported DISCARD requests with EOPNOTSUPP dm mirror: do not degrade the mirror on discard error dm space map disk: fix sm_disk_count_is_more_than_one()
-