- Jul 09, 2008
-
-
Vitaly Mayatskikh authored
Switch copy_user_generic_string(), copy_user_generic_unrolled() and __copy_user_nocache() from custom tail handlers to generic copy_user_tail_handle(). Signed-off-by:
Vitaly Mayatskikh <v.mayatskih@gmail.com> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Vitaly Mayatskikh authored
Introduce generic C routine for handling necessary tail operations after protection fault in copy_*_user on x86. Signed-off-by:
Vitaly Mayatskikh <v.mayatskih@gmail.com> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
-
Cyrill Gorcunov authored
Signed-off-by:
Cyrill Gorcunov <gorcunov@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: akpm@linux-foundation.org Cc: andi@firstfloor.org Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Yinghai Lu authored
to avoid warning from find_low_pfn_range for high pages size etc Signed-off-by:
Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
fix: arch/x86/kernel/acpi/boot.c: In function ‘dmi_ignore_irq0_timer_override’: arch/x86/kernel/acpi/boot.c:1443: error: implicit declaration of function ‘force_mask_ioapic_irq_2’ Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Rafael J. Wysocki authored
The problems are that, with the ACPI vs timer overring issue _fixed_, after using the box for some time (between several seconds and 1 hour, at random) processes get very high CPU loads (once I've got X using 107% of the CPU, for example) and the system becomes unresponsive, as though there were interrupts lost or something similar. Andreas Herrman reproduced similar problems: > Ok, now I've reproduced the stability problem. > - Using tip/master, > - reverting e38502eb8aa82314d5ab0eba45f50e6790dadd88 and > - applying your patch from this posting > http://marc.info/?l=linux-kernel&m=121539354224562&w=4 > > Starting X, firefox, gimp, tuxpaint and doing some drawing in tuxpaint > results in a slow system. Drawing is almost not possible anymore -- > Selections of new colors, cursors etc. is performed with huge delay > if it's performed at all. > > BTW, the code sets up timer IRQ as Virtual Wire IRQ: > > Jul 8 14:57:58 kodscha IO-APIC (apicid-pin) 2-22, 2-23 not connected. > Jul 8 14:57:58 kodscha ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > Jul 8 14:57:58 kodscha ...trying to set up timer as Virtual Wire IRQ... works. > > and both INT0 and INT2 of IOAPIC are masked: > > Jul 8 14:57:58 kodscha NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: > Jul 8 14:57:58 kodscha 00 000 1 0 0 0 0 0 0 00 > Jul 8 14:57:58 kodscha 01 003 0 0 0 0 0 1 1 31 > Jul 8 14:57:58 kodscha 02 003 1 0 0 0 0 0 0 30 > > I've also seen strange CPU utilization -- with syslog-ng: > > top - 15:33:06 up 35 min, 4 users, load average: 1.70, 0.68, 0.37 > Tasks: 64 total, 4 running, 60 sleeping, 0 stopped, 0 zombie > Cpu0 : 0.0%us,100.0%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st > Cpu1 : 6.4%us, 87.2%sy, 0.0%ni, 5.8%id, 0.0%wa, 0.6%hi, 0.0%si, 0.0%st > Mem: 895384k total, 283568k used, 611816k free, 35492k buffers > Swap: 1959920k total, 0k used, 1959920k free, 163044k cached > > PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND > 4632 root 20 0 17216 800 580 S 104 0.1 0:34.22 syslog-ng > 28505 root 20 0 205m 11m 4024 S 6 1.3 0:21.16 X > 28518 root 20 0 56292 5652 4492 S 1 0.6 0:01.80 fluxbox > 1 root 20 0 3724 608 508 S 0 0.1 0:00.36 init > > So far I have no clue why C1E-idle in conjunction with virtual wire > mode causes this strange behaviour. > > ... and I start to think about the root cause of all this. > > I've performed similar tests under X with the IRQ0/INT0 configuration and > I did not see above symptoms. So lets fall back to the IRQ0/INT0 configuration on this box. This basically restores the dont-use-the-lapic-timer exception mechanism that was unconditional on this box prior commit 8750bf5 ("x86: add C1E aware idle function"). Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Yinghai Lu authored
handle head and tail that are not aligned to big pages (2MB/1GB boundary). with this patch, on system that support gbpages, change: last_map_addr: 1080000000 end: 1078000000 to: last_map_addr: 1078000000 end: 1078000000 Signed-off-by:
Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Yinghai Lu authored
When system have 4g less ram installed, and acpi table sit near end of ram, make max_pfn cover them too, so 64bit kernel don't need to mess up fixmap. Signed-off-by:
Yinghai Lu <yhlu.kernel@gmail.com> Cc: "Suresh Siddha" <suresh.b.siddha@intel.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Yinghai Lu authored
Signed-off-by:
Yinghai Lu <yhlu.kernel@gmail.com> Cc: "Nick Piggin" <npiggin@suse.de> Cc: "Mark McLoughlin" <markmc@redhat.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: "Eduardo Habkost" <ehabkost@redhat.com> Cc: "Vegard Nossum" <vegard.nossum@gmail.com> Cc: "Stephen Tweedie" <sct@redhat.com> Cc: "Jeremy Fitzhardinge" <jeremy@goop.org> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Yinghai Lu authored
prepare for overmapped patch also printout last_map_addr together with end Signed-off-by:
Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
Remove them from the arch-specific file. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
x86_64 does not need it, but it won't have X86_INTEL_USERCOPY defined either. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
We also carry the unaligned version with us. Only x86_64 uses it, but there's no problem in defining it. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
Move both versions, which are highly similar, to uaccess.h. Note that, for x86_64, X86_WP_WORKS_OK is always defined. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
We also check user pointer in x86_64 put_user, the way i386 does. In a separate patch for bisecting purposes. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
For both __put_user_x and __put_user_8 macros, pass the error variable explicitly. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
Move __get_user_asm and __get_user_size and __get_user_nocheck to uaccess.h. This requires us to define a macro at __get_user_size for the 64-bit access case. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
Let the user of the macro specify the desired return. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
Move both __put_user_asm and __put_user_size to uaccess.h. i386 already had a special function for 64-bit access, so for x86_64, we just define a macro with the same name. Note that for X86_64, CONFIG_X86_WP_WORKS_OK will always be defined, so the #else part will never be even compiled in. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
Let the user of the macro specify the desired return. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
Select X86_WP_WORKS_OK for x86_64 too. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
Do it in a separate patch for bisectability. Goal is to have put_user_size integrated. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
Take it out of uaccess_32.h. Since it seems that no users of the x86_64 exists, we simply pick the i386 version. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
Merge versions of getuser from uaccess_32.h and uaccess_64.h into uaccess.h. There is a part which is 64-bit only (for now), and for that, we use a __get_user_8 macro. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
Common parts of uaccess_32.h and uaccess_64.h are put in uaccess.h. Bits in uaccess_32.h and uaccess_64.h that come to this file are equal except for comments and whitespaces differences. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
Using explicit hexa (0xFFFFFFUL) introduces an unnecessary difference between i386 and x86_64 because of the size of their long. Use -1UL instead. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
Do not refer to the processor word-size with int, as it won't work with x86_64. Use long instead. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
Put the likely hint in access_ok. Just for bisectability. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
Our integration efforts broke a build with this function being used with i386. Reason is "g" can put the operand in an imm32, which according to The Book (tm), is invalid as the second operand. This is actually a bug in x86_64 too, since the x86_64 instruction set reference does not list it as valid. We probably didn't trigger this before due to the ammount of registers available for 64-bit platforms. But that's just my guess. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
For i386, __range_not_ok is a better name than __range_ok, since it returns 0 when it is in fact okay. Other than that, both versions does not need the word size specifiers, and we remove them. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
putuser_32.S and putuser_64.S are merged into putuser.S. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
In putuser_32.S and putuser_64.S, replace things like .quad, .long, and explicit references to [r|e]ax for the apropriate macros in asm/asm.h. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
Remove them where unambiguous. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
In putuser_64.S, do it the i386 way, and replace the code in beginning and end of functions with macros, since it's always the same thing. Save lines. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
Instead of operating over a register we need to put back into normal state afterwards (the memory position), just sub from rbx, which is trashed anyway. We can save a few instructions. Also, this is the i386 way. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
This is consistent with i386 usage. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
Instead of clobbering r8, clobber rbx, which is the i386 way. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
Follow the pattern, and define a single put_user_x, instead of defining macros for all available sizes. Exception is put_user_8, since the "A" constraint does not give us enough power to specify which register (a or d) to use in the 32-bit common case. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Glauber Costa authored
Clobber it in the inline asm macros, and let the compiler do this for us. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-