- May 24, 2011
-
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: obey minleft values during extent allocation correctly xfs: reset buffer pointers before freeing them xfs: avoid getting stuck during async inode flushes xfs: fix xfs_itruncate_start tracing xfs: fix duplicate workqueue initialisation xfs: kill off xfs_printk() xfs: fix race condition in AIL push trigger xfs: make AIL target updates and compares 32bit safe. xfs: always push the AIL to the target xfs: exit AIL push work correctly when AIL is empty xfs: ensure reclaim cursor is reset correctly at end of AG xfs: add an x86 compat handler for XFS_IOC_ZERO_RANGE xfs: fix compiler warning in xfs_trace.h xfs: cleanup duplicate initializations xfs: reduce the number of pagb_lock roundtrips in xfs_alloc_clear_busy xfs: exact busy extent tracking xfs: do not immediately reuse busy extent ranges xfs: optimize AGFL refills
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (137 commits) ARM: bcmring: convert to use sp804 clockevents ARM: bcmring: convert to sp804 clocksource ARM: 6912/1: bcmring: Add clkdev table in init_early clockevents: ARM sp804: obtain sp804 timer rate via clks clockevents: ARM sp804: allow clockevent name to be specified clocksource: ARM sp804: obtain sp804 timer rate via clks clocksource: ARM sp804: allow clocksource name to be specified clocksource: convert OMAP1 to 32-bit down counting clocksource clocksource: convert MXS timrotv2 to 32-bit down counting clocksource clocksource: convert SPEAr platforms 16-bit up counting clocksource clocksource: convert Integrator/AP 16-bit down counting clocksource clocksource: convert W90x900 24-bit down counting clocksource clocksource: convert ARM 32-bit down counting clocksources clocksource: convert ARM 32-bit up counting clocksources clocksource: add common mmio clocksource ARM: update sa1100 to reflect PXA updates ARM: omap1: convert to using readl/writel instead of volatile struct ARM: omap1: delete useless interrupt handler ARM: s5p: consolidate selection of timer register ARM: 6939/1: fix missing 'cpu_relax()' declaration ...
-
Vikram Narayanan authored
Fixed the broken links in the SubmittingPatches file. [ The old links turn out to not be broken after all, but the new links are certainly more readable - Linus ] Signed-off-by:
Vikram Narayanan <vikram186@gmail.com> Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Nicolas Kaiser authored
Fixed typos. v2: Incorporated changes by Randy Dunlap. Signed-off-by:
Nicolas Kaiser <nikai@nikai.net> Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Harry Wei authored
Update LXR (Linux cross reference) web link. Signed-off-by:
Harry Wei <harryxiyou@gmail.com> Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Lucian Adrian Grijincu authored
max_user_instances was removed in this commit: commit 9df04e1f Author: Davide Libenzi <davidel@xmailserver.org> Date: Thu Jan 29 14:25:26 2009 -0800 epoll: drop max_user_instances and rely only on max_user_watches but the documentation entry was not removed. Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by:
Lucian Adrian Grijincu <lucian.grijincu@gmail.com> Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
v2, updated based on comments from Joe and Paul. Update to Documentation/dontdiff, based on many updates to various .gitignore patches over the last 2 years. Initially begun by Michael Prokop <mika@grml.org>, with lots of changes by Randy Dunlap. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Michael Prokop <mika@grml.org> Cc: Joe Perches <joe@perches.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, apic: Include module.h header in apic_flat_64.c x86, apic: Make apic drivers static x86, apic: Clean up bigsmp apic selection code x86, apic: Use .apicdrivers section for the apic drivers list x86, apic: Introduce .apicdrivers section to find the list of apic drivers x86, x2apic: Move the common bits to x2apic.h x86, x2apic: Minimize IPI register writes using cluster groups x86, x2apic: Track the x2apic cluster sibling map x86, x2apic: Remove duplicate code for IPI mask routines x86, apic: Use probe routines to simplify apic selection x86, ioapic: Consolidate mp_ioapic_routing[] into 'struct ioapic' x86, ioapic: Consolidate gsi routing info into 'struct ioapic' x86, ioapic: Consolidate mp_ioapics[] into 'struct ioapic' x86, ioapic: Consolidate ioapic_saved_data[] into 'struct ioapic' x86, ioapic: Add struct ioapic x86, ioapic: Remove duplicate code for saving/restoring RTEs x86, ioapic: Use ioapic_saved_data while enabling intr-remapping x86, ioapic: Allocate ioapic_saved_data early x86, ioapic: Fix potential resume deadlock
-
Linus Torvalds authored
Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Increase SCHED_LOAD_SCALE resolution sched: Introduce SCHED_POWER_SCALE to scale cpu_power calculations sched: Cleanup set_load_weight()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds authored
* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (970 commits) staging: usbip: replace usbip_u{dbg,err,info} and printk with dev_ and pr_ staging:iio: Trivial kconfig reorganization and uniformity improvements. staging:iio:documenation partial update. staging:iio: use pollfunc allocation helpers in remaining drivers. staging:iio:max1363 misc cleanups and use of for_each_bit_set to simplify event code spitting out. staging:iio: implement an iio_info structure to take some of the constant elements out of iio_dev. staging:iio:meter:ade7758: Use private data space from iio_allocate_device staging:iio:accel:lis3l02dq make write_reg_8 take value not a pointer to value. staging:iio: ring core cleanups + check if read_last available in lis3l02dq staging:iio:core cleanup: squash tiny wrappers and use dev_set_name to handle creation of event interface name. staging:iio: poll func allocation clean up. staging:iio:ad7780 trivial unused header cleanup. staging:iio:adc: AD7780: Use private data space from iio_allocate_device + trivial fixes staging:iio:adc:AD7780: Convert to new channel registration method staging:iio:adc: AD7606: Drop dev_data in favour of iio_priv() staging:iio:adc: AD7606: Consitently use indio_dev staging:iio: Rip out helper for software rings. staging:iio:adc:AD7298: Use private data space from iio_allocate_device staging:iio: rationalization of different buffer implementation hooks. staging:iio:imu:adis16400 avoid allocating rx, tx, and state separately from iio_dev. ... Fix up trivial conflicts in - drivers/staging/intel_sst/intelmid.c: patches applied in both branches - drivers/staging/rt2860/common/cmm_data_{pci,usb}.c: removed vs spelling - drivers/staging/usbip/vhci_sysfs.c: trivial header file inclusion
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (205 commits) USB: EHCI: Remove SPARC_LEON {read,write}_be definitions from ehci.h USB: UHCI: Support big endian GRUSBHC HC sparc: add {read,write}*_be routines USB: UHCI: Add support for big endian descriptors USB: UHCI: Use ACCESS_ONCE rather than using a full compiler barrier USB: UHCI: Add support for big endian mmio usb-storage: Correct adjust_quirks to include latest flags usb/isp1760: Fix possible unlink problems usb/isp1760: Move function isp1760_endpoint_disable() within file. USB: remove remaining usages of hcd->state from usbcore and fix regression usb: musb: ux500: add configuration and build options for ux500 dma usb: musb: ux500: add dma glue layer for ux500 usb: musb: ux500: add dma name for ux500 usb: musb: ux500: add ux500 specific code for gadget side usb: musb: fix compile error usb-storage: fix up the unusual_realtek device list USB: gadget: f_audio: Fix invalid dereference of initdata EHCI: don't rescan interrupt QHs needlessly OHCI: fix regression caused by nVidia shutdown workaround USB: OTG: msm: Free VCCCX regulator even if we can't set the voltage ...
-
Randy Dunlap authored
apic_flat_64.c needs to include module.h because it uses EXPORT_SYMBOL_GPL(). This fixes these warnings on some !SMP randconfigs: arch/x86/kernel/apic/apic_flat_64.c:31: warning: data definition has no type or storage class arch/x86/kernel/apic/apic_flat_64.c:31: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/x86/kernel/apic/apic_flat_64.c:31: warning: parameter names (without types) in function declaration Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Link: http://lkml.kernel.org/r/20110523104300.dd532a99.randy.dunlap@oracle.com Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds authored
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (48 commits) serial: 8250_pci: add support for Cronyx Omega PCI multiserial board. tty/serial: Fix break handling for PORT_TEGRA tty/serial: Add explicit PORT_TEGRA type n_tracerouter and n_tracesink ldisc additions. Intel PTI implementaiton of MIPI 1149.7. Kernel documentation for the PTI feature. export kernel call get_task_comm(). tty: Remove to support serial for S5P6442 pch_phub: Support new device ML7223 8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter ASoC: Update cx20442 for TTY API change pch_uart: Support new device ML7223 IOH parport: Use request_muxed_region for IT87 probe and lock tty/serial: add support for Xilinx PS UART n_gsm: Use print_hex_dump_bytes drivers/tty/moxa.c: Put correct tty value TTY: tty_io, annotate locking functions TTY: serial_core, remove superfluous set_task_state TTY: serial_core, remove invalid test Char: moxa, fix locking in moxa_write ... Fix up trivial conflicts in drivers/bluetooth/hci_ldisc.c and drivers/tty/serial/Makefile. I did the hci_ldisc thing as an evil merge, cleaning things up.
-
Guenter Roeck authored
cpu_sibling_mask() is not defined unless CONFIG_SMP is defined, so it must not be used directly in the code without ifdef protection. To solve the problem and avoid ifdefs in the code, define for_each_sibling() and use it instead. Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: hrtimers: Reorder clock bases hrtimers: Avoid touching inactive timer bases hrtimers: Make struct hrtimer_cpu_base layout less stupid timerfd: Manage cancelable timers in timerfd clockevents: Move C3 stop test outside lock alarmtimer: Drop device refcount after rtc_open() alarmtimer: Check return value of class_find_device() timerfd: Allow timers to be cancelled when clock was set hrtimers: Prepare for cancel on clock was set timers
-
Russell King authored
Conflicts: arch/arm/Kconfig arch/arm/mach-ns9xxx/include/mach/uncompress.h
-
Russell King authored
Merge branches 'consolidate', 'ep93xx', 'fixes', 'misc', 'mmci', 'remove' and 'spear' into for-linus
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slub: Deal with hyperthetical case of PAGE_SIZE > 2M slub: Remove node check in slab_free slub: avoid label inside conditional slub: Make CONFIG_DEBUG_PAGE_ALLOC work with new fastpath slub: Avoid warning for !CONFIG_SLUB_DEBUG slub: Remove CONFIG_CMPXCHG_LOCAL ifdeffery slub: Move debug handlign in __slab_free slub: Move node determination out of hotpath slub: Eliminate repeated use of c->page through a new page variable slub: get_map() function to establish map of free objects in a slab slub: Use NUMA_NO_NODE in get_partial slub: Fix a typo in config name
-
Russell King authored
Merge branches 'consolidate-clksrc', 'consolidate-flash', 'consolidate-generic', 'consolidate-smp', 'consolidate-stmp' and 'consolidate-zones' into consolidate
-
Russell King authored
bcmring has a set of four sp804 timers incorporated, yet it has its own copy of the sp804 code. Convert its clockevent implementation to the standard sp804 support code. Cc: Jiandong Zheng <jdzheng@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
bcmring has a set of four sp804 timers incorporated, yet it has its own copy of the sp804 code. Convert its clocksource implementation to the standard sp804 support code. Cc: Jiandong Zheng <jdzheng@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Jiandong Zheng authored
Move adding clkdev table to init_early to make sure the common sp804 clockevents can be initialized properly. Signed-off-by:
Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
This allows platforms to specify the rate of the SP804 clockevent via the clk subsystem. While ARM boards clock these at 1MHz, BCMRing also has SP804 timers but are clocked at different rates. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
This allows platforms to specify the clcokevent name upon registration. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
This allows platforms to specify the rate of the SP804 clocksource via the clk subsystem. While ARM boards clock these at 1MHz, BCMRing also has SP804 timers but are clocked at different rates. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
This allows platforms to specify the clocksource name upon registration, which is necessary should they wish to register more than one sp804 clocksource. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Convert the OMAP1 32-bit down counting clocksource to the generic clocksource infrastructure. Tested-by:
Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Convert the MXS timrotv2 32-bit down counting clocksource to the generic clocksource infrastructure. Cc: Sascha Hauer <kernel@pengutronix.de> Acked-by:
Shawn Guo <shawn.guo@freescale.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Convert SPEAr platforms 16-bit up counting clocksource, which requires a 16-bit register access read rather than 32-bit. Acked-by:
Viresh Kumar <viresh.kumar@st.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Convert the Integrator/AP 16-bit down-counting clocksource to the generic clocksource infrastructure. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Convert the W90x900 24-bit down-counting clocksource to the generic mmio clocksource infrastructure Acked-by:
Wan ZongShun <mcuos.com@gmail.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Convert SP804, MXC, Nomadik and Orion 32-bit down-counting clocksources to generic mmio clocksource infrastructure. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Alessandro Rubini <rubini@unipv.it> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Lennert Buytenhek <kernel@wantstofly.org> Acked-by:
Nicolas Pitre <nico@fluxnic.net> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Convert ixp4xx, lpc32xx, mxc, netx, pxa, sa1100, tcc8k, tegra and u300 to use the generic mmio clocksource recently introduced. Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Acked-by:
Eric Miao <eric.y.miao@gmail.com> Acked-by:
"Hans J. Koch" <hjk@hansjkoch.de> Acked-by:
Colin Cross <ccross@android.com> Cc: Erik Gilling <konkers@android.com> Cc: Olof Johansson <olof@lixom.net> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Add a generic mmio clocksource, covering both 32-bit and 16-bit register access sizes, for up or down counters. This can be used to easily create clocksources for simple counter-based implementations. Cc: Alessandro Rubini <rubini@unipv.it> Cc: Colin Cross <ccross@android.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Erik Gilling <konkers@android.com> Acked-by:
"Hans J. Koch" <hjk@hansjkoch.de> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: linux-omap@vger.kernel.org Acked-by:
Nicolas Pitre <nico@fluxnic.net> Cc: Olof Johansson <olof@lixom.net> Tested-by:
Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Tony Lindgren <tony@atomide.com> Reviewed-by:
Viresh Kumar <viresh.kumar@st.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Update sa1100 clockevents code to reflect what its later derivative does with clockevents_calc_mult_shift(). Use OSSR_M* constants too. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Tested-by:
Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
The OMAP1 clocksource interrupt handler just increments a variable which otherwise isn't used, so this seems to be unnecessary. Tony Lindgren confirms, so lets remove it. Acked-by:
Kevin Hilman <khilman@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Cc: linux-omap@vger.kernel.org Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
s5p duplicates the runtime selection of the timer register three times. Move this out into a separate function. FIXME: It is unclear whether this code needs to support true runtime selection of the timer register, or whether it can be selected once at init time. Acked-by:
Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Pekka Enberg authored
Conflicts: mm/slub.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/stagingLinus Torvalds authored
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: hwmon: (coretemp) Fix checkpatch errors hwmon: Remove pkgtemp driver hwmon: (coretemp) Merge pkgtemp with coretemp hwmon: (pmbus) Add support for Analog Devices ADM1275 hwmon: (pmbus) Support for TI UCD90xxx series Sequencer and System Health Controllers hwmon: (pmbus) Add support for TI UCD9200 series of PWM System Controllers hwmon: (pmbus) Use device specific function to read fan configuration hwmon: (pmbus) Expand scope of device specific get_status function hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers hwmon: Driver for MAX16065 System Manager and compatibles hwmon: (sht15) add support for CRC validation hwmon: (sht15) add support for the status register hwmon: (sht15) clean-up the probe function hwmon: (sht15) general code clean-up hwmon: Add support for MAX6642
-