- Feb 19, 2020
-
-
Paul Blakey authored
The pool sizes represent the pool sizes in the fw. when we request a pool size from fw, it will return the next possible group. We track how many pools the fw has left and start requesting groups from the big to the small. When we start request 4k group, which doesn't exists in fw, fw wants to allocate the next possible size, 64k, but will fail since its exhausted. The correct smallest pool size in fw is 128 and not 4k. Fixes: 39ac237c ("net/mlx5: E-Switch, Refactor chains and priorities") Signed-off-by:
Paul Blakey <paulb@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Dmytro Linkin authored
There is no need to reset all vf config (except link state) between legacy and switchdev modes changes. Also, set link state to AUTO, when legacy enabled. Fixes: 3b83b6c2 ("net/mlx5e: Clear VF config when switching modes") Signed-off-by:
Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Hamdan Igbaria authored
Set vport gvmi in the tag, only when source gvmi is set in the bit mask. Fixes: 26d688e3 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by:
Hamdan Igbaria <hamdani@mellanox.com> Reviewed-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Aya Levin authored
When health reporters are not supported, recovery function is invoked directly, not via devlink health reporters. In this direct flow, the recover function input parameter was passed incorrectly and is causing a kernel oops. This patch is fixing the input parameter. Following call trace is observed on rx error health reporting. Internal error: Oops: 96000007 [#1] PREEMPT SMP Process kworker/u16:4 (pid: 4584, stack limit = 0x00000000c9e45703) Call trace: mlx5e_rx_reporter_err_rq_cqe_recover+0x30/0x164 [mlx5_core] mlx5e_health_report+0x60/0x6c [mlx5_core] mlx5e_reporter_rq_cqe_err+0x6c/0x90 [mlx5_core] mlx5e_rq_err_cqe_work+0x20/0x2c [mlx5_core] process_one_work+0x168/0x3d0 worker_thread+0x58/0x3d0 kthread+0x108/0x134 Fixes: c50de4af ("net/mlx5e: Generalize tx reporter's functionality") Signed-off-by:
Aya Levin <ayal@mellanox.com> Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Aya Levin authored
Initialize RQ doorbell counters to zero prior to moving an RQ from RST to RDY state. Per HW spec, when RQ is back to RDY state, the descriptor ID on the completion is reset. The doorbell record must comply. Fixes: 8276ea13 ("net/mlx5e: Report and recover from CQE with error on RQ") Signed-off-by:
Aya Levin <ayal@mellanox.com> Reported-by:
Tariq Toukan <tariqt@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Huy Nguyen authored
rtnl_bridge_getlink is protected by rcu lock, so mlx5_eswitch_get_vepa cannot take mutex lock. Two possible issues can happen: 1. User at the same time change vepa mode via RTM_SETLINK command. 2. User at the same time change the switchdev mode via devlink netlink interface. Case 1 cannot happen because rtnl executes one message in order. Case 2 can happen but we do not expect user to change the switchdev mode when changing vepa. Even if a user does it, so he will read a value which is no longer valid. Fixes: 8da202b2 ("net/mlx5: E-Switch, Add support for VEPA in legacy mode.") Signed-off-by:
Huy Nguyen <huyn@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Madhuparna Bhowmik authored
list_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by:
Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Madhuparna Bhowmik authored
list_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by:
Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
This reverts commit ba27b4cd Ahmed reported ouf-of-order issues bisected to commit ba27b4cd ("net: dev: introduce support for sch BYPASS for lockless qdisc"). I can't find any working solution other than a plain revert. This will introduce some minor performance regressions for pfifo_fast qdisc. I plan to address them in net-next with more indirect call wrapper boilerplate for qdiscs. Reported-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Fixes: ba27b4cd ("net: dev: introduce support for sch BYPASS for lockless qdisc") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jonathan Neuschäfer authored
Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
Dan Carpenter reports static checker warnings due to bogus BIT() usage: net/mptcp/subflow.c:571 subflow_write_space() warn: test_bit() takes a bit number net/mptcp/subflow.c:694 subflow_state_change() warn: test_bit() takes a bit number net/mptcp/protocol.c:261 ssk_check_wmem() warn: test_bit() takes a bit number [..] This is harmless (we use bits 1 & 2 instead of 0 and 1), but would break eventually when adding BIT(5) (or 6, depends on size of 'long'). Just use 0 and 1, the values are only passed to test/set/clear_bit functions. Fixes: 648ef4b8 ("mptcp: Implement MPTCP receive path") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michal Kalderon authored
If an event is added while the rdma workqueue is being destroyed it could lead to several races, list corruption, null pointer dereference during queue_work or init_queue. This fixes the race between the two flows which can occur during shutdown. A kref object and a completion object are added to the rdma_dev structure, these are initialized before the workqueue is created. The refcnt is used to indicate work is being added to the workqueue and ensures the cleanup flow won't start while we're in the middle of adding the event. Once the work is added, the refcnt is decreased and the cleanup flow is safe to run. Fixes: cee9fbd8 ("qede: Add qedr framework") Signed-off-by:
Ariel Elior <ariel.elior@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Feb 18, 2020
-
-
Hangbin Liu authored
0x11 and 0x12 set the ECN bits based on RFC2474, it would be better to avoid that. 0x14 and 0x18 would be better and works as well. Reported-by:
Petr Machata <petrm@mellanox.com> Fixes: 4e867c9a ("selftests: forwarding: vxlan_bridge_1d: fix tos value") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexandre Belloni authored
The reserved member should be named reserved3. Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
When T2 timer is to be stopped, the asoc should also be deleted, otherwise, there will be no chance to call sctp_association_free and the asoc could last in memory forever. However, in sctp_sf_shutdown_sent_abort(), after adding the cmd SCTP_CMD_TIMER_STOP for T2 timer, it may return error due to the format error from __sctp_sf_do_9_1_abort() and miss adding SCTP_CMD_ASSOC_FAILED where the asoc will be deleted. This patch is to fix it by moving the format error check out of __sctp_sf_do_9_1_abort(), and do it before adding the cmd SCTP_CMD_TIMER_STOP for T2 timer. Thanks Hangbin for reporting this issue by the fuzz testing. v1->v2: - improve the comment in the code as Marcelo's suggestion. Fixes: 96ca468b ("sctp: check invalid value of length parameter in error cause") Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason Baron authored
tc flower rules that are based on src or dst port blocking are sometimes ineffective due to uninitialized stack data. __skb_flow_dissect() extracts ports from the skb for tc flower to match against. However, the port dissection is not done when when the FLOW_DIS_IS_FRAGMENT bit is set in key_control->flags. All callers of __skb_flow_dissect(), zero-out the key_control field except for fl_classify() as used by the flower classifier. Thus, the FLOW_DIS_IS_FRAGMENT may be set on entry to __skb_flow_dissect(), since key_control is allocated on the stack and may not be initialized. Since key_basic and key_control are present for all flow keys, let's make sure they are initialized. Fixes: 62230715 ("flow_dissector: do not dissect l4 ports for fragments") Co-developed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Jason Baron <jbaron@akamai.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Horatiu Vultur authored
Each extracted frame on Ocelot has an IFH. The frame and IFH are extracted by reading chuncks of 4 bytes from a register. In case the IFH and frames were read corretly it would try to read the next frame. In case there are no more frames in the queue, it checks if there were any previous errors and in that case clear the queue. But this check will always succeed also when there are no errors. Because when extracting the IFH the error is checked against 4(number of bytes read) and then the error is set only if the extraction of the frame failed. So in a happy case where there are no errors the err variable is still 4. So it could be a case where after the check that there are no more frames in the queue, a frame will arrive in the queue but because the error is not reseted, it would try to flush the queue. So the frame will be lost. The fix consist in resetting the error after reading the IFH. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Feb 17, 2020
-
-
Paul Cercueil authored
The call to of_get_mac_address() can return -EPROBE_DEFER, for instance when the MAC address is read from a NVMEM driver that did not probe yet. Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Mathieu Malaterre <malat@debian.org> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Fix all kernel-doc warnings in <linux/skbuff.h>. Fixes these warnings: ../include/linux/skbuff.h:890: warning: Function parameter or member 'list' not described in 'sk_buff' ../include/linux/skbuff.h:890: warning: Function parameter or member 'dev_scratch' not described in 'sk_buff' ../include/linux/skbuff.h:890: warning: Function parameter or member 'ip_defrag_offset' not described in 'sk_buff' ../include/linux/skbuff.h:890: warning: Function parameter or member 'skb_mstamp_ns' not described in 'sk_buff' ../include/linux/skbuff.h:890: warning: Function parameter or member '__cloned_offset' not described in 'sk_buff' ../include/linux/skbuff.h:890: warning: Function parameter or member 'head_frag' not described in 'sk_buff' ../include/linux/skbuff.h:890: warning: Function parameter or member '__pkt_type_offset' not described in 'sk_buff' ../include/linux/skbuff.h:890: warning: Function parameter or member 'encapsulation' not described in 'sk_buff' ../include/linux/skbuff.h:890: warning: Function parameter or member 'encap_hdr_csum' not described in 'sk_buff' ../include/linux/skbuff.h:890: warning: Function parameter or member 'csum_valid' not described in 'sk_buff' ../include/linux/skbuff.h:890: warning: Function parameter or member '__pkt_vlan_present_offset' not described in 'sk_buff' ../include/linux/skbuff.h:890: warning: Function parameter or member 'vlan_present' not described in 'sk_buff' ../include/linux/skbuff.h:890: warning: Function parameter or member 'csum_complete_sw' not described in 'sk_buff' ../include/linux/skbuff.h:890: warning: Function parameter or member 'csum_level' not described in 'sk_buff' ../include/linux/skbuff.h:890: warning: Function parameter or member 'inner_protocol_type' not described in 'sk_buff' ../include/linux/skbuff.h:890: warning: Function parameter or member 'remcsum_offload' not described in 'sk_buff' ../include/linux/skbuff.h:890: warning: Function parameter or member 'sender_cpu' not described in 'sk_buff' ../include/linux/skbuff.h:890: warning: Function parameter or member 'reserved_tailroom' not described in 'sk_buff' ../include/linux/skbuff.h:890: warning: Function parameter or member 'inner_ipproto' not described in 'sk_buff' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Remove stale comments since this flag is no longer a bit mask but is a bit field. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Randy Dunlap authored
Fix all kernel-doc warnings for <net/sock.h>. Fixes these warnings: ../include/net/sock.h:232: warning: Function parameter or member 'skc_addrpair' not described in 'sock_common' ../include/net/sock.h:232: warning: Function parameter or member 'skc_portpair' not described in 'sock_common' ../include/net/sock.h:232: warning: Function parameter or member 'skc_ipv6only' not described in 'sock_common' ../include/net/sock.h:232: warning: Function parameter or member 'skc_net_refcnt' not described in 'sock_common' ../include/net/sock.h:232: warning: Function parameter or member 'skc_v6_daddr' not described in 'sock_common' ../include/net/sock.h:232: warning: Function parameter or member 'skc_v6_rcv_saddr' not described in 'sock_common' ../include/net/sock.h:232: warning: Function parameter or member 'skc_cookie' not described in 'sock_common' ../include/net/sock.h:232: warning: Function parameter or member 'skc_listener' not described in 'sock_common' ../include/net/sock.h:232: warning: Function parameter or member 'skc_tw_dr' not described in 'sock_common' ../include/net/sock.h:232: warning: Function parameter or member 'skc_rcv_wnd' not described in 'sock_common' ../include/net/sock.h:232: warning: Function parameter or member 'skc_tw_rcv_nxt' not described in 'sock_common' ../include/net/sock.h:498: warning: Function parameter or member 'sk_rx_skb_cache' not described in 'sock' ../include/net/sock.h:498: warning: Function parameter or member 'sk_wq_raw' not described in 'sock' ../include/net/sock.h:498: warning: Function parameter or member 'tcp_rtx_queue' not described in 'sock' ../include/net/sock.h:498: warning: Function parameter or member 'sk_tx_skb_cache' not described in 'sock' ../include/net/sock.h:498: warning: Function parameter or member 'sk_route_forced_caps' not described in 'sock' ../include/net/sock.h:498: warning: Function parameter or member 'sk_txtime_report_errors' not described in 'sock' ../include/net/sock.h:498: warning: Function parameter or member 'sk_validate_xmit_skb' not described in 'sock' ../include/net/sock.h:498: warning: Function parameter or member 'sk_bpf_storage' not described in 'sock' ../include/net/sock.h:2024: warning: No description found for return value of 'sk_wmem_alloc_get' ../include/net/sock.h:2035: warning: No description found for return value of 'sk_rmem_alloc_get' ../include/net/sock.h:2046: warning: No description found for return value of 'sk_has_allocations' ../include/net/sock.h:2082: warning: No description found for return value of 'skwq_has_sleeper' ../include/net/sock.h:2244: warning: No description found for return value of 'sk_page_frag' ../include/net/sock.h:2444: warning: Function parameter or member 'tcp_rx_skb_cache_key' not described in 'DECLARE_STATIC_KEY_FALSE' ../include/net/sock.h:2444: warning: Excess function parameter 'sk' description in 'DECLARE_STATIC_KEY_FALSE' ../include/net/sock.h:2444: warning: Excess function parameter 'skb' description in 'DECLARE_STATIC_KEY_FALSE' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marek Vasut authored
The Micrel KSZ8851-16MLLI datasheet DS00002357B page 12 states that BE[3:0] signals are active high. This contradicts the measurements of the behavior of the actual chip, where these signals behave as active low. For example, to read the CIDER register, the bus must expose 0xc0c0 during the address phase, which means BE[3:0]=4'b1100. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marek Vasut authored
The packet data written to and read from Micrel KSZ8851-16MLLI must be byte-swapped in 16-bit mode, add this byte-swapping. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Marek Vasut authored
This driver is mixing 8-bit and 16-bit bus accessors for reasons unknown, however the speculation is that this was some sort of attempt to support the 8-bit bus mode. As per the KS8851-16MLL documentation, all two registers accessed via the 8-bit accessors are internally 16-bit registers, so reading them using 16-bit accessors is fine. The KS_CCR read can be converted to 16-bit read outright, as it is already a concatenation of two 8-bit reads of that register. The KS_RXQCR accesses are 8-bit only, however writing the top 8 bits of the register is OK as well, since the driver caches the entire 16-bit register value anyway. Finally, the driver is not used by any hardware in the kernel right now. The only hardware available to me is one with 16-bit bus, so I have no way to test the 8-bit bus mode, however it is unlikely this ever really worked anyway. If the 8-bit bus mode is ever required, it can be easily added by adjusting the 16-bit accessors to do 2 consecutive accesses, which is how this should have been done from the beginning. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Matthieu Baerts authored
Without this modification and if CRYPTO is not selected, we have this warning: WARNING: unmet direct dependencies detected for CRYPTO_LIB_SHA256 Depends on [n]: CRYPTO [=n] Selected by [y]: - MPTCP [=y] && NET [=y] && INET [=y] MPTCP selects CRYPTO_LIB_SHA256 which seems to depend on CRYPTO. CRYPTO is now selected to avoid this issue. Even though the config system prints that warning, it looks like sha256.c is compiled and linked even without CONFIG_CRYPTO. Since MPTCP will end up needing CONFIG_CRYPTO anyway in future commits -- currently in preparation for net-next -- we propose to add it now to fix the warning. The dependency in the config system comes from the fact that CRYPTO_LIB_SHA256 is defined in "lib/crypto/Kconfig" which is sourced from "crypto/Kconfig" only if CRYPTO is selected. Fixes: 65492c5a (mptcp: move from sha1 (v0) to sha256 (v1)) Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Taehee Yoo says: ==================== bonding: fix bonding interface bugs This patchset fixes lockdep problem in bonding interface 1. The first patch is to add missing netdev_update_lockdep_key(). After bond_release(), netdev_update_lockdep_key() should be called. But both ioctl path and attribute path don't call netdev_update_lockdep_key(). This patch adds missing netdev_update_lockdep_key(). 2. The second patch is to export netdev_next_lower_dev_rcu symbol. netdev_next_lower_dev_rcu() is useful to implement the function, which is to walk their all lower interfaces. This patch is actually a preparing patch for the third patch. 3. The last patch is to fix lockdep waring in bond_get_stats(). The stats_lock uses a dynamic lockdep key. So, after "nomaster" operation, updating the dynamic lockdep key routine is needed. but it doesn't So, lockdep warning occurs. Change log: v1 -> v2: - Update headline from "fix bonding interface bugs" to "bonding: fix bonding interface bugs" - Drop a patch("bonding: do not collect slave's stats") - Add new patches - ("net: export netdev_next_lower_dev_rcu()") - ("bonding: fix lockdep warning in bond_get_stats()") ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Taehee Yoo authored
In the "struct bonding", there is stats_lock. This lock protects "bond_stats" in the "struct bonding". bond_stats is updated in the bond_get_stats() and this function would be executed concurrently. So, the lock is needed. Bonding interfaces would be nested. So, either stats_lock should use dynamic lockdep class key or stats_lock should be used by spin_lock_nested(). In the current code, stats_lock is using a dynamic lockdep class key. But there is no updating stats_lock_key routine So, lockdep warning will occur. Test commands: ip link add bond0 type bond ip link add bond1 type bond ip link set bond0 master bond1 ip link set bond0 nomaster ip link set bond1 master bond0 Splat looks like: [ 38.420603][ T957] 5.5.0+ #394 Not tainted [ 38.421074][ T957] ------------------------------------------------------ [ 38.421837][ T957] ip/957 is trying to acquire lock: [ 38.422399][ T957] ffff888063262cd8 (&bond->stats_lock_key#2){+.+.}, at: bond_get_stats+0x90/0x4d0 [bonding] [ 38.423528][ T957] [ 38.423528][ T957] but task is already holding lock: [ 38.424526][ T957] ffff888065fd2cd8 (&bond->stats_lock_key){+.+.}, at: bond_get_stats+0x90/0x4d0 [bonding] [ 38.426075][ T957] [ 38.426075][ T957] which lock already depends on the new lock. [ 38.426075][ T957] [ 38.428536][ T957] [ 38.428536][ T957] the existing dependency chain (in reverse order) is: [ 38.429475][ T957] [ 38.429475][ T957] -> #1 (&bond->stats_lock_key){+.+.}: [ 38.430273][ T957] _raw_spin_lock+0x30/0x70 [ 38.430812][ T957] bond_get_stats+0x90/0x4d0 [bonding] [ 38.431451][ T957] dev_get_stats+0x1ec/0x270 [ 38.432088][ T957] bond_get_stats+0x1a5/0x4d0 [bonding] [ 38.432767][ T957] dev_get_stats+0x1ec/0x270 [ 38.433322][ T957] rtnl_fill_stats+0x44/0xbe0 [ 38.433866][ T957] rtnl_fill_ifinfo+0xeb2/0x3720 [ 38.434474][ T957] rtmsg_ifinfo_build_skb+0xca/0x170 [ 38.435081][ T957] rtmsg_ifinfo_event.part.33+0x1b/0xb0 [ 38.436848][ T957] rtnetlink_event+0xcd/0x120 [ 38.437455][ T957] notifier_call_chain+0x90/0x160 [ 38.438067][ T957] netdev_change_features+0x74/0xa0 [ 38.438708][ T957] bond_compute_features.isra.45+0x4e6/0x6f0 [bonding] [ 38.439522][ T957] bond_enslave+0x3639/0x47b0 [bonding] [ 38.440225][ T957] do_setlink+0xaab/0x2ef0 [ 38.440786][ T957] __rtnl_newlink+0x9c5/0x1270 [ 38.441463][ T957] rtnl_newlink+0x65/0x90 [ 38.442075][ T957] rtnetlink_rcv_msg+0x4a8/0x890 [ 38.442774][ T957] netlink_rcv_skb+0x121/0x350 [ 38.443451][ T957] netlink_unicast+0x42e/0x610 [ 38.444282][ T957] netlink_sendmsg+0x65a/0xb90 [ 38.444992][ T957] ____sys_sendmsg+0x5ce/0x7a0 [ 38.445679][ T957] ___sys_sendmsg+0x10f/0x1b0 [ 38.446365][ T957] __sys_sendmsg+0xc6/0x150 [ 38.447007][ T957] do_syscall_64+0x99/0x4f0 [ 38.447668][ T957] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 38.448538][ T957] [ 38.448538][ T957] -> #0 (&bond->stats_lock_key#2){+.+.}: [ 38.449554][ T957] __lock_acquire+0x2d8d/0x3de0 [ 38.450148][ T957] lock_acquire+0x164/0x3b0 [ 38.450711][ T957] _raw_spin_lock+0x30/0x70 [ 38.451292][ T957] bond_get_stats+0x90/0x4d0 [bonding] [ 38.451950][ T957] dev_get_stats+0x1ec/0x270 [ 38.452425][ T957] bond_get_stats+0x1a5/0x4d0 [bonding] [ 38.453362][ T957] dev_get_stats+0x1ec/0x270 [ 38.453825][ T957] rtnl_fill_stats+0x44/0xbe0 [ 38.454390][ T957] rtnl_fill_ifinfo+0xeb2/0x3720 [ 38.456257][ T957] rtmsg_ifinfo_build_skb+0xca/0x170 [ 38.456998][ T957] rtmsg_ifinfo_event.part.33+0x1b/0xb0 [ 38.459351][ T957] rtnetlink_event+0xcd/0x120 [ 38.460086][ T957] notifier_call_chain+0x90/0x160 [ 38.460829][ T957] netdev_change_features+0x74/0xa0 [ 38.461752][ T957] bond_compute_features.isra.45+0x4e6/0x6f0 [bonding] [ 38.462705][ T957] bond_enslave+0x3639/0x47b0 [bonding] [ 38.463476][ T957] do_setlink+0xaab/0x2ef0 [ 38.464141][ T957] __rtnl_newlink+0x9c5/0x1270 [ 38.464897][ T957] rtnl_newlink+0x65/0x90 [ 38.465522][ T957] rtnetlink_rcv_msg+0x4a8/0x890 [ 38.466215][ T957] netlink_rcv_skb+0x121/0x350 [ 38.466895][ T957] netlink_unicast+0x42e/0x610 [ 38.467583][ T957] netlink_sendmsg+0x65a/0xb90 [ 38.468285][ T957] ____sys_sendmsg+0x5ce/0x7a0 [ 38.469202][ T957] ___sys_sendmsg+0x10f/0x1b0 [ 38.469884][ T957] __sys_sendmsg+0xc6/0x150 [ 38.470587][ T957] do_syscall_64+0x99/0x4f0 [ 38.471245][ T957] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 38.472093][ T957] [ 38.472093][ T957] other info that might help us debug this: [ 38.472093][ T957] [ 38.473438][ T957] Possible unsafe locking scenario: [ 38.473438][ T957] [ 38.474898][ T957] CPU0 CPU1 [ 38.476234][ T957] ---- ---- [ 38.480171][ T957] lock(&bond->stats_lock_key); [ 38.480808][ T957] lock(&bond->stats_lock_key#2); [ 38.481791][ T957] lock(&bond->stats_lock_key); [ 38.482754][ T957] lock(&bond->stats_lock_key#2); [ 38.483416][ T957] [ 38.483416][ T957] *** DEADLOCK *** [ 38.483416][ T957] [ 38.484505][ T957] 3 locks held by ip/957: [ 38.485048][ T957] #0: ffffffffbccf6230 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x457/0x890 [ 38.486198][ T957] #1: ffff888065fd2cd8 (&bond->stats_lock_key){+.+.}, at: bond_get_stats+0x90/0x4d0 [bonding] [ 38.487625][ T957] #2: ffffffffbc9254c0 (rcu_read_lock){....}, at: bond_get_stats+0x5/0x4d0 [bonding] [ 38.488897][ T957] [ 38.488897][ T957] stack backtrace: [ 38.489646][ T957] CPU: 1 PID: 957 Comm: ip Not tainted 5.5.0+ #394 [ 38.490497][ T957] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 38.492810][ T957] Call Trace: [ 38.493219][ T957] dump_stack+0x96/0xdb [ 38.493709][ T957] check_noncircular+0x371/0x450 [ 38.494344][ T957] ? lookup_address+0x60/0x60 [ 38.494923][ T957] ? print_circular_bug.isra.35+0x310/0x310 [ 38.495699][ T957] ? hlock_class+0x130/0x130 [ 38.496334][ T957] ? __lock_acquire+0x2d8d/0x3de0 [ 38.496979][ T957] __lock_acquire+0x2d8d/0x3de0 [ 38.497607][ T957] ? register_lock_class+0x14d0/0x14d0 [ 38.498333][ T957] ? check_chain_key+0x236/0x5d0 [ 38.499003][ T957] lock_acquire+0x164/0x3b0 [ 38.499800][ T957] ? bond_get_stats+0x90/0x4d0 [bonding] [ 38.500706][ T957] _raw_spin_lock+0x30/0x70 [ 38.501435][ T957] ? bond_get_stats+0x90/0x4d0 [bonding] [ 38.502311][ T957] bond_get_stats+0x90/0x4d0 [bonding] [ ... ] But, there is another problem. The dynamic lockdep class key is protected by RTNL, but bond_get_stats() would be called outside of RTNL. So, it would use an invalid dynamic lockdep class key. In order to fix this issue, stats_lock uses spin_lock_nested() instead of a dynamic lockdep key. The bond_get_stats() calls bond_get_lowest_level_rcu() to get the correct nest level value, which will be used by spin_lock_nested(). The "dev->lower_level" indicates lower nest level value, but this value is invalid outside of RTNL. So, bond_get_lowest_level_rcu() returns valid lower nest level value in the RCU critical section. bond_get_lowest_level_rcu() will be work only when LOCKDEP is enabled. Fixes: 089bca2c ("bonding: use dynamic lockdep key instead of subclass") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Taehee Yoo authored
netdev_next_lower_dev_rcu() will be used to implement a function, which is to walk all lower interfaces. There are already functions that they walk their lower interface. (netdev_walk_all_lower_dev_rcu, netdev_walk_all_lower_dev()). But, there would be cases that couldn't be covered by given netdev_walk_all_lower_dev_{rcu}() function. So, some modules would want to implement own function, which is to walk all lower interfaces. In the next patch, netdev_next_lower_dev_rcu() will be used. In addition, this patch removes two unused prototypes in netdevice.h. Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Taehee Yoo authored
After bond_release(), netdev_update_lockdep_key() should be called. But both ioctl path and attribute path don't call netdev_update_lockdep_key(). This patch adds missing netdev_update_lockdep_key(). Test commands: ip link add bond0 type bond ip link add bond1 type bond ifenslave bond0 bond1 ifenslave -d bond0 bond1 ifenslave bond1 bond0 Splat looks like: [ 29.501182][ T1046] WARNING: possible circular locking dependency detected [ 29.501945][ T1039] hardirqs last disabled at (1962): [<ffffffffac6c807f>] handle_mm_fault+0x13f/0x700 [ 29.503442][ T1046] 5.5.0+ #322 Not tainted [ 29.503447][ T1046] ------------------------------------------------------ [ 29.504277][ T1039] softirqs last enabled at (1180): [<ffffffffade00678>] __do_softirq+0x678/0x981 [ 29.505443][ T1046] ifenslave/1046 is trying to acquire lock: [ 29.505886][ T1039] softirqs last disabled at (1169): [<ffffffffac19c18a>] irq_exit+0x17a/0x1a0 [ 29.509997][ T1046] ffff88805d5da280 (&dev->addr_list_lock_key#3){+...}, at: dev_mc_sync_multiple+0x95/0x120 [ 29.511243][ T1046] [ 29.511243][ T1046] but task is already holding lock: [ 29.512192][ T1046] ffff8880460f2280 (&dev->addr_list_lock_key#4){+...}, at: bond_enslave+0x4482/0x47b0 [bonding] [ 29.514124][ T1046] [ 29.514124][ T1046] which lock already depends on the new lock. [ 29.514124][ T1046] [ 29.517297][ T1046] [ 29.517297][ T1046] the existing dependency chain (in reverse order) is: [ 29.518231][ T1046] [ 29.518231][ T1046] -> #1 (&dev->addr_list_lock_key#4){+...}: [ 29.519076][ T1046] _raw_spin_lock+0x30/0x70 [ 29.519588][ T1046] dev_mc_sync_multiple+0x95/0x120 [ 29.520208][ T1046] bond_enslave+0x448d/0x47b0 [bonding] [ 29.520862][ T1046] bond_option_slaves_set+0x1a3/0x370 [bonding] [ 29.521640][ T1046] __bond_opt_set+0x1ff/0xbb0 [bonding] [ 29.522438][ T1046] __bond_opt_set_notify+0x2b/0xf0 [bonding] [ 29.523251][ T1046] bond_opt_tryset_rtnl+0x92/0xf0 [bonding] [ 29.524082][ T1046] bonding_sysfs_store_option+0x8a/0xf0 [bonding] [ 29.524959][ T1046] kernfs_fop_write+0x276/0x410 [ 29.525620][ T1046] vfs_write+0x197/0x4a0 [ 29.526218][ T1046] ksys_write+0x141/0x1d0 [ 29.526818][ T1046] do_syscall_64+0x99/0x4f0 [ 29.527430][ T1046] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 29.528265][ T1046] [ 29.528265][ T1046] -> #0 (&dev->addr_list_lock_key#3){+...}: [ 29.529272][ T1046] __lock_acquire+0x2d8d/0x3de0 [ 29.529935][ T1046] lock_acquire+0x164/0x3b0 [ 29.530638][ T1046] _raw_spin_lock+0x30/0x70 [ 29.531187][ T1046] dev_mc_sync_multiple+0x95/0x120 [ 29.531790][ T1046] bond_enslave+0x448d/0x47b0 [bonding] [ 29.532451][ T1046] bond_option_slaves_set+0x1a3/0x370 [bonding] [ 29.533163][ T1046] __bond_opt_set+0x1ff/0xbb0 [bonding] [ 29.533789][ T1046] __bond_opt_set_notify+0x2b/0xf0 [bonding] [ 29.534595][ T1046] bond_opt_tryset_rtnl+0x92/0xf0 [bonding] [ 29.535500][ T1046] bonding_sysfs_store_option+0x8a/0xf0 [bonding] [ 29.536379][ T1046] kernfs_fop_write+0x276/0x410 [ 29.537057][ T1046] vfs_write+0x197/0x4a0 [ 29.537640][ T1046] ksys_write+0x141/0x1d0 [ 29.538251][ T1046] do_syscall_64+0x99/0x4f0 [ 29.538870][ T1046] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 29.539659][ T1046] [ 29.539659][ T1046] other info that might help us debug this: [ 29.539659][ T1046] [ 29.540953][ T1046] Possible unsafe locking scenario: [ 29.540953][ T1046] [ 29.541883][ T1046] CPU0 CPU1 [ 29.542540][ T1046] ---- ---- [ 29.543209][ T1046] lock(&dev->addr_list_lock_key#4); [ 29.543880][ T1046] lock(&dev->addr_list_lock_key#3); [ 29.544873][ T1046] lock(&dev->addr_list_lock_key#4); [ 29.545863][ T1046] lock(&dev->addr_list_lock_key#3); [ 29.546525][ T1046] [ 29.546525][ T1046] *** DEADLOCK *** [ 29.546525][ T1046] [ 29.547542][ T1046] 5 locks held by ifenslave/1046: [ 29.548196][ T1046] #0: ffff88806044c478 (sb_writers#5){.+.+}, at: vfs_write+0x3bb/0x4a0 [ 29.549248][ T1046] #1: ffff88805af00890 (&of->mutex){+.+.}, at: kernfs_fop_write+0x1cf/0x410 [ 29.550343][ T1046] #2: ffff88805b8b54b0 (kn->count#157){.+.+}, at: kernfs_fop_write+0x1f2/0x410 [ 29.551575][ T1046] #3: ffffffffaecf4cf0 (rtnl_mutex){+.+.}, at: bond_opt_tryset_rtnl+0x5f/0xf0 [bonding] [ 29.552819][ T1046] #4: ffff8880460f2280 (&dev->addr_list_lock_key#4){+...}, at: bond_enslave+0x4482/0x47b0 [bonding] [ 29.554175][ T1046] [ 29.554175][ T1046] stack backtrace: [ 29.554907][ T1046] CPU: 0 PID: 1046 Comm: ifenslave Not tainted 5.5.0+ #322 [ 29.555854][ T1046] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 29.557064][ T1046] Call Trace: [ 29.557504][ T1046] dump_stack+0x96/0xdb [ 29.558054][ T1046] check_noncircular+0x371/0x450 [ 29.558723][ T1046] ? print_circular_bug.isra.35+0x310/0x310 [ 29.559486][ T1046] ? hlock_class+0x130/0x130 [ 29.560100][ T1046] ? __lock_acquire+0x2d8d/0x3de0 [ 29.560761][ T1046] __lock_acquire+0x2d8d/0x3de0 [ 29.561366][ T1046] ? register_lock_class+0x14d0/0x14d0 [ 29.562045][ T1046] ? find_held_lock+0x39/0x1d0 [ 29.562641][ T1046] lock_acquire+0x164/0x3b0 [ 29.563199][ T1046] ? dev_mc_sync_multiple+0x95/0x120 [ 29.563872][ T1046] _raw_spin_lock+0x30/0x70 [ 29.564464][ T1046] ? dev_mc_sync_multiple+0x95/0x120 [ 29.565146][ T1046] dev_mc_sync_multiple+0x95/0x120 [ 29.565793][ T1046] bond_enslave+0x448d/0x47b0 [bonding] [ 29.566487][ T1046] ? bond_update_slave_arr+0x940/0x940 [bonding] [ 29.567279][ T1046] ? bstr_printf+0xc20/0xc20 [ 29.567857][ T1046] ? stack_trace_consume_entry+0x160/0x160 [ 29.568614][ T1046] ? deactivate_slab.isra.77+0x2c5/0x800 [ 29.569320][ T1046] ? check_chain_key+0x236/0x5d0 [ 29.569939][ T1046] ? sscanf+0x93/0xc0 [ 29.570442][ T1046] ? vsscanf+0x1e20/0x1e20 [ 29.571003][ T1046] bond_option_slaves_set+0x1a3/0x370 [bonding] [ ... ] Fixes: ab92d68f ("net: core: add generic lockdep keys") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
The ending character of the string shoulb be \n, not \b. Fixes: 17936b43 ("NFC: Standardize logging style") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michal Kubecek authored
A bitset without mask in a _SET request means we want exactly the bits in the bitset to be set. This works correctly for compact format but when verbose format is parsed, ethnl_update_bitset32_verbose() only sets the bits present in the request bitset but does not clear the rest. This can cause incorrect results like lion:~ # ethtool eth0 | grep Wake Supports Wake-on: pumbg Wake-on: g lion:~ # ethtool -s eth0 wol u lion:~ # ethtool eth0 | grep Wake Supports Wake-on: pumbg Wake-on: ug when the second ethtool command issues request ETHTOOL_MSG_WOL_SET ETHTOOL_A_WOL_HEADER ETHTOOL_A_HEADER_DEV_NAME = "eth0" ETHTOOL_A_WOL_MODES ETHTOOL_A_BITSET_NOMASK ETHTOOL_A_BITSET_BITS ETHTOOL_A_BITSET_BITS_BIT ETHTOOL_BITSET_BIT_INDEX = 1 Fix the logic by clearing the whole target bitmap before we start iterating through the request bits. Fixes: 10b518d4 ("ethtool: netlink bitset handling") Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
We need to ensure that the default VID is untagged otherwise the switch will be sending tagged frames and the results can be problematic. This is especially true with b53 switches that use VID 0 as their default VLAN since VID 0 has a special meaning. Fixes: fea83353 ("net: dsa: b53: Fix default VLAN ID") Fixes: 061f6a50 ("net: dsa: Add ndo_vlan_rx_{add, kill}_vid implementation") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jason A. Donenfeld says: ==================== wireguard fixes for 5.6-rc2 Here are four fixes for wireguard collected since rc1: 1) Some small cleanups to the test suite to help massively parallel builds. 2) A change in how we reset our load calculation to avoid a more expensive comparison, suggested by Matt Dunwoodie. 3) I've been loading more and more of wireguard's surface into syzkaller, trying to get our coverage as complete as possible, leading in this case to a fix for mtu=0 devices. 4) A removal of superfluous code, pointed out by Eric Dumazet. v2 fixes a logical problem in the patch for (3) pointed out by Eric Dumazet. v3 replaces some non-obvious bitmath in (3) with a more obvious expression, and adds patch (4). ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
synchronize_net() is a wrapper around synchronize_rcu(), so there's no point in having synchronize_net and synchronize_rcu back to back, despite the documentation comment suggesting maybe it's somewhat useful, "Wait for packets currently being received to be done." This commit removes the extra call. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
It turns out there's an easy way to get packets queued up while still having an MTU of zero, and that's via persistent keep alive. This commit makes sure that in whatever condition, we don't wind up dividing by zero. Note that an MTU of zero for a wireguard interface is something quasi-valid, so I don't think the correct fix is to limit it via min_mtu. This can be reproduced easily with: ip link add wg0 type wireguard ip link add wg1 type wireguard ip link set wg0 up mtu 0 ip link set wg1 up wg set wg0 private-key <(wg genkey) wg set wg1 listen-port 1 private-key <(wg genkey) peer $(wg show wg0 public-key) wg set wg0 peer $(wg show wg1 public-key) persistent-keepalive 1 endpoint 127.0.0.1:1 However, while min_mtu=0 seems fine, it makes sense to restrict the max_mtu. This commit also restricts the maximum MTU to the greatest number for which rounding up to the padding multiple won't overflow a signed integer. Packets this large were always rejected anyway eventually, due to checks deeper in, but it seems more sound not to even let the administrator configure something that won't work anyway. We use this opportunity to clean up this function a bit so that it's clear which paths we're expecting. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
This is a small optimization that prevents more expensive comparisons from happening when they are no longer necessary, by clearing the last_under_load variable whenever we wind up in a state where we were under load but we no longer are. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Suggested-by:
Matt Dunwoodie <ncon@noconroy.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
This gives us fewer dependencies and shortens build time, fixes up some hash checking race conditions, and also fixes missing directory creation that caused issues on massively parallel builds. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mat Martineau authored
Userspace should not be able to directly manipulate subflow socket options before a connection is established since it is not yet known if it will be an MPTCP subflow or a TCP fallback subflow. TCP fallback subflows can be more directly controlled by userspace because they are regular TCP connections, while MPTCP subflow sockets need to be configured for the specific needs of MPTCP. Use the same logic as sendmsg/recvmsg to ensure that socket option calls are only passed through to known TCP fallback subflows. Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arun Parameswaran authored
The mii management register in iproc mdio block does not have a retention register so it is lost on suspend. Save and restore value of register while resuming from suspend. Fixes: bb1a6197 ("net: phy: Initialize mdio clock at probe function") Signed-off-by:
Arun Parameswaran <arun.parameswaran@broadcom.com> Signed-off-by:
Scott Branden <scott.branden@broadcom.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
netdev_name_node_alt_destroy() does a lookup over all device names of a namespace. We need to make sure the name belongs to the device of interest, and that we do not destroy its primary name, since we rely on it being not deleted : dev->name_node would indeed point to freed memory. syzbot report was the following : BUG: KASAN: use-after-free in dev_net include/linux/netdevice.h:2206 [inline] BUG: KASAN: use-after-free in mld_force_mld_version net/ipv6/mcast.c:1172 [inline] BUG: KASAN: use-after-free in mld_in_v2_mode_only net/ipv6/mcast.c:1180 [inline] BUG: KASAN: use-after-free in mld_in_v1_mode+0x203/0x230 net/ipv6/mcast.c:1190 Read of size 8 at addr ffff88809886c588 by task swapper/1/0 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x32 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:641 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135 dev_net include/linux/netdevice.h:2206 [inline] mld_force_mld_version net/ipv6/mcast.c:1172 [inline] mld_in_v2_mode_only net/ipv6/mcast.c:1180 [inline] mld_in_v1_mode+0x203/0x230 net/ipv6/mcast.c:1190 mld_send_initial_cr net/ipv6/mcast.c:2083 [inline] mld_dad_timer_expire+0x24/0x230 net/ipv6/mcast.c:2118 call_timer_fn+0x1ac/0x780 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x6c3/0x1790 kernel/time/timer.c:1786 __do_softirq+0x262/0x98c kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x19b/0x1e0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:546 [inline] smp_apic_timer_interrupt+0x1a3/0x610 arch/x86/kernel/apic/apic.c:1146 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829 </IRQ> RIP: 0010:native_safe_halt+0xe/0x10 arch/x86/include/asm/irqflags.h:61 Code: 68 73 c5 f9 eb 8a cc cc cc cc cc cc e9 07 00 00 00 0f 00 2d 94 be 59 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 84 be 59 00 fb f4 <c3> cc 55 48 89 e5 41 57 41 56 41 55 41 54 53 e8 de 2a 74 f9 e8 09 RSP: 0018:ffffc90000d3fd68 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 RAX: 1ffffffff136761a RBX: ffff8880a99fc340 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000006 RDI: ffff8880a99fcbd4 RBP: ffffc90000d3fd98 R08: ffff8880a99fc340 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000 R13: ffffffff8aa5a1c0 R14: 0000000000000000 R15: 0000000000000001 arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:686 default_idle_call+0x84/0xb0 kernel/sched/idle.c:94 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x3c8/0x6e0 kernel/sched/idle.c:269 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:361 start_secondary+0x2f4/0x410 arch/x86/kernel/smpboot.c:264 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:242 Allocated by task 10229: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc mm/kasan/common.c:515 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:488 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:529 __do_kmalloc_node mm/slab.c:3616 [inline] __kmalloc_node+0x4e/0x70 mm/slab.c:3623 kmalloc_node include/linux/slab.h:578 [inline] kvmalloc_node+0x68/0x100 mm/util.c:574 kvmalloc include/linux/mm.h:645 [inline] kvzalloc include/linux/mm.h:653 [inline] alloc_netdev_mqs+0x98/0xe40 net/core/dev.c:9797 rtnl_create_link+0x22d/0xaf0 net/core/rtnetlink.c:3047 __rtnl_newlink+0xf9f/0x1790 net/core/rtnetlink.c:3309 rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3377 rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5438 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5456 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:672 __sys_sendto+0x262/0x380 net/socket.c:1998 __do_compat_sys_socketcall net/compat.c:771 [inline] __se_compat_sys_socketcall net/compat.c:719 [inline] __ia32_compat_sys_socketcall+0x530/0x710 net/compat.c:719 do_syscall_32_irqs_on arch/x86/entry/common.c:337 [inline] do_fast_syscall_32+0x27b/0xe16 arch/x86/entry/common.c:408 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139 Freed by task 10229: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:337 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:476 kasan_slab_free+0xe/0x10 mm/kasan/common.c:485 __cache_free mm/slab.c:3426 [inline] kfree+0x10a/0x2c0 mm/slab.c:3757 __netdev_name_node_alt_destroy+0x1ff/0x2a0 net/core/dev.c:322 netdev_name_node_alt_destroy+0x57/0x80 net/core/dev.c:334 rtnl_alt_ifname net/core/rtnetlink.c:3518 [inline] rtnl_linkprop.isra.0+0x575/0x6f0 net/core/rtnetlink.c:3567 rtnl_dellinkprop+0x46/0x60 net/core/rtnetlink.c:3588 rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5438 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5456 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:672 ____sys_sendmsg+0x753/0x880 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0x105/0x1d0 net/socket.c:2430 __compat_sys_sendmsg net/compat.c:642 [inline] __do_compat_sys_sendmsg net/compat.c:649 [inline] __se_compat_sys_sendmsg net/compat.c:646 [inline] __ia32_compat_sys_sendmsg+0x7a/0xb0 net/compat.c:646 do_syscall_32_irqs_on arch/x86/entry/common.c:337 [inline] do_fast_syscall_32+0x27b/0xe16 arch/x86/entry/common.c:408 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139 The buggy address belongs to the object at ffff88809886c000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 1416 bytes inside of 4096-byte region [ffff88809886c000, ffff88809886d000) The buggy address belongs to the page: page:ffffea0002621b00 refcount:1 mapcount:0 mapping:ffff8880aa402000 index:0x0 compound_mapcount: 0 flags: 0xfffe0000010200(slab|head) raw: 00fffe0000010200 ffffea0002610d08 ffffea0002607608 ffff8880aa402000 raw: 0000000000000000 ffff88809886c000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88809886c480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88809886c500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88809886c580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88809886c600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88809886c680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 36fbf1e5 ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Jiri Pirko <jiri@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-