MPT Fusion adapters can steer completions to individual queues and we now
have support for shared host-wide tags in the I/O stack. The addition of
the host-wide tags allows us to enable multiqueue support for MPT Fusion
adapters. Once host-wise tags are enabled, the CPU hotplug feature is also
supported.

Allow use of host-wide tags to be disabled through the "host_tagset_enable"
module parameter. Once we do not have any major performance regressions
using host-wide tags, we will drop the hand-crafted interrupt affinity
settings.

Performance is meeting expectations. About 3.1M IOPS using 24 Drive SSD on
Aero controllers.

Link: https://lore.kernel.org/r/20210202095832.23072-1-sreekanth.reddy@broadcom.com


Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Currently the driver allocates memory for ReplyPostFree queues in chunks of
16. In resource constrained environments--such as VM with 1 GB RAM and 2
CPUs--memory allocation for ReplyPostFree pools may fail because the driver
tries to allocate a memory for 16 ReplyPostFree queues even though the
actual number needed is 2.

Change the driver to allocate memory for only the actual number of queues
needed if the ReplyPostFree queue count is less than 16.

Link: https://lore.kernel.org/r/20210201141522.25363-1-sreekanth.reddy@broadcom.com


Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Building with 'make W=1' enables -Wpacked-not-aligned, and this warns about
pmcraid because of incompatible alignment constraints for
pmcraid_passthrough_ioctl_buffer:

drivers/scsi/pmcraid.h:1044:1: warning: alignment 1 of 'struct pmcraid_passthrough_ioctl_buffer' is less than 32 [-Wpacked-not-aligned]
 1044 | } __attribute__ ((packed));
      | ^
drivers/scsi/pmcraid.h:1041:24: warning: 'ioarcb' offset 16 in 'struct pmcraid_passthrough_ioctl_buffer' isn't aligned to 32 [-Wpacked-not-aligned]
 1041 |  struct pmcraid_ioarcb ioarcb;

The inner structure is documented as having 32 byte alignment here, but is
starts at a 16 byte offset in the outer structure, so it's never actually
aligned, as the outer structure is also marked 'packed'.

Lee Jones point this out as one of the last files that need to be changed
before the warning can be enabled by default.

Change the annotations in a way that avoids the warning but leaves the
layout unchanged, by removing the packing on the inner structure and adding
it to the outer one. The one-byte request_buffer[] array should have been a
flexible array member here, which is how I change it to avoid extra padding
from the alignment attribute.

Link: https://lore.kernel.org/r/20210204163020.3286210-1-arnd@kernel.org


Cc: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

In sd_probe(), print a warning if CONFIG_BLK_DEV_ZONED is disabled and a
TYPE_ZBC device is found. While at it, use IS_ENABLED() to test if
CONFIG_BLK_DEV_ZONED is enabled instead using of a #ifdef.

Link: https://lore.kernel.org/r/20210128055658.530133-1-damien.lemoal@wdc.com


Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Commit 0653c358 ("scsi: Drop gdth driver") fails to update MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains:

  warning: no file matches F:    drivers/scsi/gdt*

Remove the GDT SCSI DISK ARRAY CONTROLLER DRIVER section as well, as the
driver is removed now.

Link: https://lore.kernel.org/r/20210129052829.13642-1-lukas.bulwahn@gmail.com


Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The initialization of clk_scaling.min_gear was removed by mistake. This
change adds it back, otherwise clock scaling down would fail.

Link: https://lore.kernel.org/r/1611802172-37802-1-git-send-email-cang@codeaurora.org
Fixes: 4543d9d7

 ("scsi: ufs: Refactor ufshcd_init/exit_clk_scaling/gating()")
Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fix misspellings of "physical".

Link: https://lore.kernel.org/r/20210126211248.2920028-1-helgaas@kernel.org


Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

allocted -> allocated

Link: https://lore.kernel.org/r/20210126054908.45468-1-dingsenjie@163.com


Signed-off-by: dingsenjie <dingsenjie@yulong.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fix the following coccicheck warnings:

./drivers/scsi/qla2xxx/qla_nvme.c:288:24-26: WARNING !A || A && B is
equivalent to !A || B.

Link: https://lore.kernel.org/r/1611650554-33019-1-git-send-email-abaci-bugfix@linux.alibaba.com


Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fix misspellings of "physical".

Link: https://lore.kernel.org/r/20210126210328.2918631-1-helgaas@kernel.org


Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

According to FCP-4 (9.4.2):

  If the command requested that data beyond the length specified by the
  FCP_DL field be transferred, then the device server shall set the
  FCP_RESID_OVER bit (see 9.5.8) to one in the FCP_RSP IU and:

  a) process the command normally except that data beyond the FCP_DL count
  shall not be requested or transferred;

  b) transfer no data and return CHECK CONDITION status with the sense key
  set to ILLEGAL REQUEST and the additional sense code set to INVALID FIELD
  IN COMMAND INFORMATION UNIT; or

  c) may transfer data and return CHECK CONDITION status with the sense key
  set to ABORTED COMMAND and the additional sense code set to INVALID FIELD
  IN COMMAND INFORMATION UNIT.

TCM follows b) and transfers no data for residual writes but returns
INVALID FIELD IN CDB instead of INVALID FIELD IN COMMAND INFORMATION UNIT.

Change the ASCQ to INVALID FIELD IN COMMAND INFORMATION UNIT to meet the
standard.

Link: https://lore.kernel.org/r/20201203082035.54566-4-a.kovaleva@yadro.com


Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

According to RFC 7143 11.4.5.2.:

  If SPDTL > EDTL for a task, iSCSI Overflow MUST be signaled in the SCSI
  Response PDU as specified in Section 11.4.5.1.  The Residual Count MUST
  be set to the numerical value of (SPDTL - EDTL).

  If SPDTL < EDTL for a task, iSCSI Underflow MUST be signaled in the SCSI
  Response PDU as specified in Section 11.4.5.1.  The Residual Count MUST
  be set to the numerical value of (EDTL - SPDTL).

libiscsi has residual write tests that check residual kind and residual
amount and all of them (Write10Residuals, Write12Residuals,
Write16Residuals) currently fail.

One of the reasons why they fail is because target completes write commands
with INVALID FIELD IN CDB before setting the Overflow/Underflow bit and
residual amount.

Set the Overflow/Underflow bit and the residual amount before failing a
write to comply with RFC 7143.

Link: https://lore.kernel.org/r/20201203082035.54566-3-a.kovaleva@yadro.com


Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

TCM always fails SBC commands with residuals for 4Kn devices when the
command is processed by sbc_parse_cdb(). That prevents residual signalling
to the transport driver because residual kind and residual amount aren't
set. It also makes residual handling different from 512-byte formatted
devices - if there are residuals 512-byte LUN would proceed with command
execution while 4K-byte LUN would fail.

Link: https://lore.kernel.org/r/20201203082035.54566-2-a.kovaleva@yadro.com
Based-on: https://patchwork.kernel.org/project/target-devel/patch/20170523234854.21452-31-bart.vanassche@sandisk.com/


Based-on-patch-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Konstantin Vinogradov <k.vinogradov@yadro.com>
Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The controller provides trace FIFO DFX tool to assist link fault debugging
and link optimization. This tool can be helpful when debugging link faults
without SAS analyzers. Each PHY has an independent trace FIFO interface.

The user can configure the trace FIFO tool of one PHY by using the
following six interfaces:

signal_sel: select signal group applies to different scenarios.
  0x0: linkrate negotiation
  0x1: Host 12G TX train
  0x2: Disk 12G TX train
  0x3: SAS PHY CTRL DFX 0
  0x4: SAS PHY CTRL DFX 1
  0x5: SAS PCS DFX
  other: linkrate negotiation
dump_mask: The masked hardware status bit will not be updated.
dump_mode: determines how to dump data after trigger signal is generated.
  0x0: dump forever
  0x1: dump 32 data after trigger signal is generated
  0x2: no more dump after trigger signal is generated
trigger_mode: determines the trigger mode, level or edge.
  0x0: dump when trigger signal changed
  0x1: dump when trigger signal's level equal to trigger_level
  0x2: dump when trigger signal's level different from trigger_level
trigger_level: determines the trigger level.
trigger_msk: mask trigger signal

The user can get 32-byte values from hardware by reading the rd_data.
These values consitute the status record of the hardware at different time
points.

Link: https://lore.kernel.org/r/1611659068-131975-6-git-send-email-john.garry@huawei.com


Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

If the controller reset occurs at the same time as driver removal, it may
be possible that the interrupts have been released prior to the host
softreset, and calling pci_irq_vector() there causes a WARN:

WARNING: CPU: 37 PID: 1542 /pci/msi.c:1275 pci_irq_vector+0xc0/0xd0
Call trace:
pci_irq_vector+0xc0/0xd0
disable_host_v3_hw+0x58/0x5b0 [hisi_sas_v3_hw]
soft_reset_v3_hw+0x40/0xc0 [hisi_sas_v3_hw]
hisi_sas_controller_reset+0x150/0x260 [hisi_sas_main]
hisi_sas_rst_work_handler+0x3c/0x58 [hisi_sas_main]

To fix, flush the driver workqueue prior to releasing the interrupts to
ensure any resets have been completed.

Link: https://lore.kernel.org/r/1611659068-131975-5-git-send-email-john.garry@huawei.com


Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Add a config option to enable debugfs support by default. And if debugfs
support is enabled by default, dump count default value is increased to 50
as generally users want something bigger than the current default in that
situation.

Link: https://lore.kernel.org/r/1611659068-131975-4-git-send-email-john.garry@huawei.com


Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Now that v2 and v3 hw expose their HW queues (and so shost.nr_hw_queues is
set), remove the conditional checks in hisi_sas_task_prep().

This change would affect v1 HW performance (as it does not expose HW
queues), but nobody uses it and support may be dropped soon.

Link: https://lore.kernel.org/r/1611659068-131975-3-git-send-email-john.garry@huawei.com


Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The platform_get_irq() check for -EPROBE_DEFER was to ensure that all the
steps to add the SCSI host are not done and then only to realise that the
probe needs to be deferred.

However, since there is now an earlier check for this in
hisi_sas_interrupt_preinit(), this check is superfluous and may be removed.

Link: https://lore.kernel.org/r/1611659068-131975-2-git-send-email-john.garry@huawei.com


Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lpfc depends on irq_poll library, but it is not selected automatically.
When irq_poll is not selected, compiling it can run into following error

ERROR: modpost: "irq_poll_init" [drivers/scsi/lpfc/lpfc.ko] undefined!
ERROR: modpost: "irq_poll_sched" [drivers/scsi/lpfc/lpfc.ko] undefined!
ERROR: modpost: "irq_poll_complete" [drivers/scsi/lpfc/lpfc.ko] undefined!

Link: https://lore.kernel.org/r/20210126000554.309858-1-ztong0001@gmail.com


Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The patch to switch using SAM status values had some typos; fix them up.

Link: https://lore.kernel.org/r/20210125085415.70574-1-hare@suse.de
Fixes: 491152c7

 ("scsi: ncr53c8xx: Use SAM status values")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The "pmb" pointer is freed at the start of the function and then freed
again in the error handling code.

Link: https://lore.kernel.org/r/YA6E8rO51hE56SVw@mwanda
Fixes: 92d7f7b0

 ("[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This was supposed to be "data" instead of "&data".  The current code will
corrupt the stack.

Link: https://lore.kernel.org/r/YA6E0geUlL9Hs04A@mwanda
Fixes: dbf1f53c

 ("scsi: qla2xxx: Implementation to get and manage host, target stats and initiator port")
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The UFS core has received a substantial rework this cycle. This in
turn has caused a merge conflict in linux-next. Merge 5.11/scsi-fixes
into 5.12/scsi-queue and resolve the conflict.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fix below warnings reported by coccicheck:
./drivers/scsi/qla2xxx/qla_init.c:3371:2-7: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:7855:5-10: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:7916:2-7: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:8113:4-18: WARNING: NULL check before
some freeing functions is not needed.
./drivers/scsi/qla2xxx/qla_init.c:8174:2-7: WARNING: NULL check before
some freeing functions is not needed.

Link: https://lore.kernel.org/r/1611306174-92627-1-git-send-email-abaci-bugfix@linux.alibaba.com


Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Yang Li <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

NULL check before vfree is not needed.

Generated by: scripts/coccinelle/free/ifnullfree.cocci

Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2012111113060.2669@hadrien


Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Since Linus Torvalds reinstated KERN_CONT in commit 4bcc595c ("printk:
reinstate KERN_CONT for printing continuation lines") in 2015, the qla1280
SCSI driver printed a rather ugly and screen real estate wasting multi-line
per device status glibberish during boot. Fix this by adding KERN_CONT as
needed.

Tested on my Sgi Octane: https://youtu.be/Lfqe1SYR2jk

Link: https://lore.kernel.org/r/20201210.223944.388095546873159172.rene@exactcode.com


Signed-off-by: René Rebe <rene@exactcode.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Delete ufshcd_wb_buf_flush_enable() and ufshcd_wb_buf_flush_disable(). Move
the implementation into ufshcd_wb_toggle_flush().

Link: https://lore.kernel.org/r/20210121185736.12471-1-huobean@gmail.com


Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The list iterator can't be NULL so this check is not required.  Removing
the check silences a Smatch warning about inconsistent NULL checking.

    drivers/scsi/qla2xxx/qla_dfs.c:371 qla_dfs_tgt_counters_show()
    error: we previously assumed 'fcport' could be null (see line 372)

Link: https://lore.kernel.org/r/YAkaaSrhn1mFqyHy@mwanda


Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fix the following coccicheck warnings:

./drivers/scsi/qla2xxx/qla_isr.c:780:2-18: WARNING: Assignment
of 0/1 to bool variable.

Link: https://lore.kernel.org/r/1611127919-56551-1-git-send-email-abaci-bugfix@linux.alibaba.com


Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Comment did not match function signature.

Link: https://lore.kernel.org/r/20210119205022.40000-1-ericcurtin17@gmail.com


Signed-off-by: Eric Curtin <ericcurtin17@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fix the following coccicheck warning:

./drivers/scsi/mpt3sas/mpt3sas_base.c:2424:5-20: WARNING: Comparison of 0/1
to bool variable

Link: https://lore.kernel.org/r/1610355253-25960-1-git-send-email-abaci-bugfix@linux.alibaba.com


Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

These variants were added for bisectability. Remove them, as all call sites
have now been convertd to use the original API.

Link: https://lore.kernel.org/r/20210118100955.1761652-20-a.darwish@linutronix.de


Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.

Switch back to the original libas API, while still passing GFP context.
The libsas _gfp() variants will be removed afterwards.

Link: https://lore.kernel.org/r/20210118100955.1761652-19-a.darwish@linutronix.de


Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.

Switch back to the original libas API, while still passing GFP context.
The libsas _gfp() variants will be removed afterwards.

Link: https://lore.kernel.org/r/20210118100955.1761652-18-a.darwish@linutronix.de


Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.

Switch back to the original event notifiers API, while still passing GFP
context.  The _gfp() notifier variants will be removed afterwards.

Link: https://lore.kernel.org/r/20210118100955.1761652-17-a.darwish@linutronix.de


Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.

Switch back to the original libas API, while still passing GFP context.
The libsas _gfp() variants will be removed afterwards.

Link: https://lore.kernel.org/r/20210118100955.1761652-16-a.darwish@linutronix.de


Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.

Switch back to the original libas API, while still passing GFP context.
The libsas _gfp() variants will be removed afterwards.

Link: https://lore.kernel.org/r/20210118100955.1761652-15-a.darwish@linutronix.de


Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.

Switch back to the original libas API, while still passing GFP context.
The libsas _gfp() variants will be removed afterwards.

Link: https://lore.kernel.org/r/20210118100955.1761652-14-a.darwish@linutronix.de


Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

All call-sites of below libsas APIs:

  - sas_alloc_event()
  - sas_notify_port_event()
  - sas_notify_phy_event()

have been converted to use the _gfp()-suffixed version.  Modify the
original APIs above to take a gfp_t flags parameter by default.

For bisectability, call-sites will be modified again to use the original
libsas APIs (while passing gfp_t). The temporary _gfp()-suffixed versions
can then be removed.

Link: https://lore.kernel.org/r/20210118100955.1761652-13-a.darwish@linutronix.de


Cc: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.

Below are the context analysis for modified functions:

=> hisi_sas_bytes_dmaed():

Since it is invoked from both process and atomic contexts, let its callers
pass the gfp_t flags:

  * hisi_sas_main.c:
  ------------------

    hisi_sas_phyup_work(): workqueue context
      -> hisi_sas_bytes_dmaed(..., GFP_KERNEL)

    hisi_sas_controller_reset_done(): has an msleep()
      -> hisi_sas_rescan_topology()
        -> hisi_sas_phy_down()
          -> hisi_sas_bytes_dmaed(..., GFP_KERNEL)

    hisi_sas_debug_I_T_nexus_reset(): calls wait_for_completion_timeout()
      -> hisi_sas_phy_down()
        -> hisi_sas_bytes_dmaed(..., GFP_KERNEL)

  * hisi_sas_v1_hw.c:
  -------------------

    int_abnormal_v1_hw(): irq handler
      -> hisi_sas_phy_down()
        -> hisi_sas_bytes_dmaed(..., GFP_ATOMIC)

  * hisi_sas_v[23]_hw.c:
  ----------------------

    int_phy_updown_v[23]_hw(): irq handler
      -> phy_down_v[23]_hw()
        -> hisi_sas_phy_down()
          -> hisi_sas_bytes_dmaed(..., GFP_ATOMIC)

=> int_bcast_v1_hw() and phy_bcast_v3_hw():

Both are invoked exclusively from irq handlers. Pass GFP_ATOMIC.

Link: https://lore.kernel.org/r/20210118100955.1761652-12-a.darwish@linutronix.de


Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>