Merge tag 'nios2_fixes_for_v5.15_part3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux

Pull nios2 fix from Dinh Nguyen:
 "Fix a build error for allmodconfig"

* tag 'nios2_fixes_for_v5.15_part3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  nios2: Make NIOS2_DTB_SOURCE_BOOL depend on !COMPILE_TEST

Pull rdma fixes from Jason Gunthorpe:
 "Nothing very exciting here, it has been a quiet cycle overall. Usual
  collection of small bug fixes:

   - irdma issues with CQ entries, VLAN completions and a mutex deadlock

   - Incorrect DCT packets in mlx5

   - Userspace triggered overflows in qib

   - Locking error in hfi

   - Typo in errno value in qib/hfi1

   - Double free in qedr

   - Leak of random kernel memory to userspace with a netlink callback"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/sa_query: Use strscpy_pad instead of memcpy to copy a string
  RDMA/irdma: Do not hold qos mutex twice on QP resume
  RDMA/irdma: Set VLAN in UD work completion correctly
  RDMA/mlx5: Initialize the ODP xarray when creating an ODP MR
  rdma/qedr: Fix crash due to redundant release of device's qp memory
  RDMA/rdmavt: Fix error code in rvt_create_qp()
  IB/hfi1: Fix abba locking issue with sc_disable()
  IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields
  RDMA/mlx5: Set user priority for DCT
  RDMA/irdma: Process extended CQ entries correctly

nios2:allmodconfig builds fail with

make[1]: *** No rule to make target 'arch/nios2/boot/dts/""',
	needed by 'arch/nios2/boot/dts/built-in.a'.  Stop.
make: [Makefile:1868: arch/nios2/boot/dts] Error 2 (ignored)

This is seen with compile tests since those enable NIOS2_DTB_SOURCE_BOOL,
which in turn enables NIOS2_DTB_SOURCE. This causes the build error
because the default value for NIOS2_DTB_SOURCE is an empty string.
Disable NIOS2_DTB_SOURCE_BOOL for compile tests to avoid the error.

Fixes: 2fc8483f

 ("nios2: Build infrastructure")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

Pull ARM SoC fixes from Arnd Bergmann:
 "One last set of small fixes for the soc tree:

   - Incorrect ethernet phy settings found on i.mx and allwinner
     platforms

   - a revert for a Qualcomm DT change that caused a boot regression

   - four patches for incorrect settings in i.MX DT files

   - new MAINTAINER file entries for dhcom boards

   - a Kconfig fix for a reset driver that became unselectable

   - three more code changes for bugs in reset drivers"

* tag 'arm-soc-fixes-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: Add maintainers for DHCOM i.MX6 and DHCOM/DHCOR STM32MP1
  Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target"
  arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY
  arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency
  arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2
  arm64: dts: imx8mm-...

Add maintainers for DH electronics DHCOM i.MX6
and DHCOM/DHCOR STM32MP1 boards.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: kernel@dh-electronics.com
Cc: arnd@arndb.de
Link: https://lore.kernel.org/r/20211025073706.2794-1-cniedermaier@dh-electronics.com'
To: soc@kernel.org
To: linux-kernel@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-arm64-fixes-for-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes

Qualcomm ARM64 DTS one more fix for 5.15

This reverts a clock change in the Qualcomm RB5 devicetree which in some
combinations of firmware and configuration causes the device to crash
during boot.

Data on an adjacent platform indicates that this is probably not be the
root cause of the problem, but this resolves the regression seen on RB5
and will allow the SM8250 platform to boot v5.15.

* tag 'qcom-arm64-fixes-for-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target"

Link: https://lore.kernel.org/r/20211025201213.1145348-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This reverts commit 001ce978.

This upstream commit broke AOSP (post Android 12 merge) build
on RB5. The device either silently crashes into USB crash mode
after android boot animation or we see a blank blue screen
with following dpu errors in dmesg:

[  T444] hw recovery is not complete for ctl:3
[  T444] [drm:dpu_encoder_phys_vid_prepare_for_kickoff:539] [dpu error]enc31 intf1 ctl 3 reset failure: -22
[  T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu error]vblank timeout
[  T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for commit done returned -110
[    C7] [drm:dpu_encoder_frame_done_timeout:2127] [dpu error]enc31 frame done timeout
[  T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu error]vblank timeout
[  T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for commit done returned -110

Fixes: 001ce978

 ("arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211014135410.4136412-1-dmitry.baryshkov@linaro.org

Commit 11086054 ("mm/secretmem: use refcount_t instead of atomic_t")
attempted to fix the problem of secretmem_users wrapping to zero and
allowing suspend once again.

But it was reverted in commit 87066fdd

 ("Revert 'mm/secretmem: use
refcount_t instead of atomic_t'") because of the problems it caused - a
refcount_t was not semantically the right type to use.

Instead prevent secretmem_users from wrapping to zero by forbidding new
users if the number of users has wrapped from positive to negative.
This stops a long way short of reaching the necessary 4 billion users
where it wraps to zero again, so there's no need to be clever with
special anti-wrap types or checking the return value from atomic_inc().

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Jordy Zomer <jordy@pwning.systems>
Cc: Kees Cook <keescook@chromium.org>,
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit efafec27 ("spi: Fix tegra20 build with CONFIG_PM=n") already
fixed the build without PM support once.  There was an alternative fix
by Guenter in commit 2bab9409 ("spi: tegra20-slink: Declare runtime
suspend and resume functions conditionally"), and Mark then merged the
two correctly in ffb1e76f ("Merge tag 'v5.15-rc2' into spi-5.15").

But for some inexplicable reason, Mark then merged things _again_ in
commit 59c4e190

 ("Merge tag 'v5.15-rc3' into spi-5.15"), and screwed
things up at that point, and the __maybe_unused attribute on
tegra_slink_runtime_resume() went missing.

Reinstate it, so that alpha (and other architectures without PM support)
builds cleanly again.

Btw, this is another prime example of how random back-merges are not
good.  Just don't do them.  Subsystem developers should not merge my
tree in any normal circumstances.  Both of those merge commits pointed
to above are bad: even the one that got the merge result right doesn't
even mention _why_ it was done, and the one that got it wrong is
obviously broken.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM fixes from Russell King:

 - Fix clang-related relocation warning in futex code

 - Fix incorrect use of get_kernel_nofault()

 - Fix bad code generation in __get_user_check() when kasan is enabled

 - Ensure TLB function table is correctly aligned

 - Remove duplicated string function definitions in decompressor

 - Fix link-time orphan section warnings

 - Fix old-style function prototype for arch_init_kprobes()

 - Only warn about XIP address when not compile testing

 - Handle BE32 big endian for keystone2 remapping

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9148/1: handle CONFIG_CPU_ENDIAN_BE32 in arch/arm/kernel/head.S
  ARM: 9141/1: only warn about XIP address when not compile testing
  ARM: 9139/1: kprobes: fix arch_init_kprobes() prototype
  ARM: 9138/1: fix link warning with XIP + frame-pointer
  ARM: 9134/1: remove duplicate memcpy() definition
  ARM: 9133/1: mm: proc-macros: ensure *_tlb_fns are 4B aligned
  ARM: 9132/1: Fix __get_user_check failure with ARM KASAN images
  ARM: 9125/1: fix incorrect use of get_kernel_nofault()
  ARM: 9122/1: select HAVE_FUTEX_CMPXCHG

Pull libata fix from Damien Le Moal:
 "A single fix in this pull request addressing an invalid error code
  return in the sata_mv driver (from Zheyu)"

* tag 'libata-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: sata_mv: Fix the error handling of mv_chip_id()

Pull pin control fixes from Linus Walleij:
 "Some late pin control fixes, the most generally annoying will probably
  be the AMD IRQ storm fix affecting the Microsoft surface.

  Summary:

   - Three fixes pertaining to Broadcom DT bindings. Some stuff didn't
     work out as inteded, we need to back out

   - A resume bug fix in the STM32 driver

   - Disable and mask the interrupts on probe in the AMD pinctrl driver,
     affecting Microsoft surface"

* tag 'pinctrl-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: amd: disable and mask interrupts on probe
  pinctrl: stm32: use valid pin identifier in stm32_pinctrl_resume()
  Revert "pinctrl: bcm: ns: support updated DT binding as syscon subnode"
  dt-bindings: pinctrl: brcm,ns-pinmux: drop unneeded CRU from example
  Revert "dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon"

When copying the device name, the length of the data memcpy copied exceeds
the length of the source buffer, which cause the KASAN issue below.  Use
strscpy_pad() instead.

 BUG: KASAN: slab-out-of-bounds in ib_nl_set_path_rec_attrs+0x136/0x320 [ib_core]
 Read of size 64 at addr ffff88811a10f5e0 by task rping/140263
 CPU: 3 PID: 140263 Comm: rping Not tainted 5.15.0-rc1+ #1
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 Call Trace:
  dump_stack_lvl+0x57/0x7d
  print_address_description.constprop.0+0x1d/0xa0
  kasan_report+0xcb/0x110
  kasan_check_range+0x13d/0x180
  memcpy+0x20/0x60
  ib_nl_set_path_rec_attrs+0x136/0x320 [ib_core]
  ib_nl_make_request+0x1c6/0x380 [ib_core]
  send_mad+0x20a/0x220 [ib_core]
  ib_sa_path_rec_get+0x3e3/0x800 [ib_core]
  cma_query_ib_route+0x29b/0x390 [rdma_cm]
  rdma_resolve_route+0x308/0x3e0 [rdma_cm]
  ucma_resolve_route+0xe1/0x150 [rdma_ucm]
  ucma_write+0x17b/0x1f0 [rdma_ucm]
  vfs_write+0x142/0x4d0
  ksys_write+0x133/0x160
  do_syscall_64+0x43/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7f26499aa90f
 Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 29 fd ff ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 5c fd ff ff 48
 RSP: 002b:00007f26495f2dc0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
 RAX: ffffffffffffffda RBX: 00000000000007d0 RCX: 00007f26499aa90f
 RDX: 0000000000000010 RSI: 00007f26495f2e00 RDI: 0000000000000003
 RBP: 00005632a8315440 R08: 0000000000000000 R09: 0000000000000001
 R10: 0000000000000000 R11: 0000000000000293 R12: 00007f26495f2e00
 R13: 00005632a83154e0 R14: 00005632a8315440 R15: 00005632a830a810

 Allocated by task 131419:
  kasan_save_stack+0x1b/0x40
  __kasan_kmalloc+0x7c/0x90
  proc_self_get_link+0x8b/0x100
  pick_link+0x4f1/0x5c0
  step_into+0x2eb/0x3d0
  walk_component+0xc8/0x2c0
  link_path_walk+0x3b8/0x580
  path_openat+0x101/0x230
  do_filp_open+0x12e/0x240
  do_sys_openat2+0x115/0x280
  __x64_sys_openat+0xce/0x140
  do_syscall_64+0x43/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 2ca546b9

 ("IB/sa: Route SA pathrecord query through netlink")
Link: https://lore.kernel.org/r/72ede0f6dab61f7f23df9ac7a70666e07ef314b0.1635055496.git.leonro@nvidia.com
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

My intel-ixp42x-welltech-epbx100 no longer boot since 4.14.
This is due to commit 463dbba4

 ("ARM: 9104/2: Fix Keystone 2 kernel
mapping regression")
which forgot to handle CONFIG_CPU_ENDIAN_BE32 as possible BE config.

Suggested-by: Krzysztof Hałasa <khalasa@piap.pl>
Fixes: 463dbba4

 ("ARM: 9104/2: Fix Keystone 2 kernel mapping regression")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

mv_init_host() propagates the value returned by mv_chip_id() which in turn
gets propagated by mv_pci_init_one() and hits local_pci_probe().

During the process of driver probing, the probe function should return < 0
for failure, otherwise, the kernel will treat value > 0 as success.

Since this is a bug rather than a recoverable runtime error we should
use dev_alert() instead of dev_err().

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

This reverts commit 11086054

.

Converting the "secretmem_users" counter to a refcount is incorrect,
because a refcount is special in zero and can't just be incremented (but
a count of users is not, and "no users" is actually perfectly valid and
not a sign of a free'd resource).

Reported-by:  <syzbot+75639e6a0331cd61d3e2@syzkaller.appspotmail.com>
Cc: Jordy Zomer <jordy@pwning.systems>
Cc: Kees Cook <keescook@chromium.org>,
Cc: Jordy Zomer <jordy@jordyzomer.github.io>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull autofs fix from Al Viro:
 "Fix for a braino of mine (in getting rid of open-coded
  dentry_path_raw() in autofs a couple of cycles ago).

  Mea culpa...  Obvious -stable fodder"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  autofs: fix wait name hash calculation in autofs_wait()

Pull scheduler fix from Borislav Petkov:
 "Reset clang's Shadow Call Stack on hotplug to prevent it from
  overflowing"

* tag 'sched_urgent_for_v5.15_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/scs: Reset the shadow stack when idle_task_exit

Pull x86 fix from Borislav Petkov:
 "A single change adding Dave Hansen to our maintainers team"

* tag 'x86_urgent_for_v5.15_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Add Dave Hansen to the x86 maintainer team

Pull ksmbd fixes from Steve French:
 "Ten fixes for the ksmbd kernel server, for improved security and
  additional buffer overflow checks:

   - a security improvement to session establishment to reduce the
     possibility of dictionary attacks

   - fix to ensure that maximum i/o size negotiated in the protocol is
     not less than 64K and not more than 8MB to better match expected
     behavior

   - fix for crediting (flow control) important to properly verify that
     sufficient credits are available for the requested operation

   - seven additional buffer overflow, buffer validation checks"

* tag '5.15-rc6-ksmbd-fixes' of git://git.samba.org/ksmbd:
  ksmbd: add buffer validation in session setup
  ksmbd: throttle session setup failures to avoid dictionary attacks
  ksmbd: validate OutputBufferLength of QUERY_DIR, QUERY_INFO, IOCTL requests
  ksmbd: validate credit charge after validating SMB2 PDU body size
  ksmbd: add buffer validation for smb direct
  ksmbd: limit read/write/trans buffer size not to exceed 8MB
  ksmbd: validate compound response buffer
  ksmbd: fix potencial 32bit overflow from data area check in smb2_write
  ksmbd: improve credits management
  ksmbd: add validation in smb2_ioctl

Pull SCSI fixes from James Bottomley:
 "Ten fixes, seven of which are in drivers.

  The core fixes are one to fix a potential crash on resume, one to sort
  out our reference count releases to avoid releasing in-use modules and
  one to adjust the cmd per lun calculation to avoid an overflow in
  hyper-v"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: ufs-pci: Force a full restore after suspend-to-disk
  scsi: qla2xxx: Fix unmap of already freed sgl
  scsi: qla2xxx: Fix a memory leak in an error path of qla2x00_process_els()
  scsi: qla2xxx: Return -ENOMEM if kzalloc() fails
  scsi: sd: Fix crashes in sd_resume_runtime()
  scsi: mpi3mr: Fix duplicate device entries when scanning through sysfs
  scsi: core: Put LLD module refcnt after SCSI device is released
  scsi: storvsc: Fix validation for unsolicited incoming packets
  scsi: iscsi: Fix set_param() handling
  scsi: core: Fix shost->cmd_per_lun calculation in scsi_add_host_with_dma()

Pull block fixes from Jens Axboe:
 "Fix for the cgroup code not ussing irq safe stats updates, and one fix
  for an error handling condition in add_partition()"

* tag 'block-5.15-2021-10-22' of git://git.kernel.dk/linux-block:
  block: fix incorrect references to disk objects
  blk-cgroup: blk_cgroup_bio_start() should use irq-safe operations on blkg->iostat_cpu

Pull io_uring fixes from Jens Axboe:
 "Two fixes for the max workers limit API that was introduced this
  series: one fix for an issue with that code, and one fixing a linked
  timeout regression in this series"

* tag 'io_uring-5.15-2021-10-22' of git://git.kernel.dk/linux-block:
  io_uring: apply worker limits to previous users
  io_uring: fix ltimeout unprep
  io_uring: apply max_workers limit to all future users
  io-wq: max_worker fixes

Pull fuse fixes from Miklos Szeredi:
 "Syzbot discovered a race in case of reusing the fuse sb (introduced in
  this cycle).

  Fix it by doing the s_fs_info initialization at the proper place"

* tag 'fuse-fixes-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: clean up error exits in fuse_fill_super()
  fuse: always initialize sb->s_fs_info
  fuse: clean up fuse_mount destruction
  fuse: get rid of fuse_put_super()
  fuse: check s_root when destroying sb

Merge tag 'hyperv-fixes-signed-20211022' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyper-v fix from Wei Liu:

 - Fix vmbus ARM64 build (Arnd Bergmann)

* tag 'hyperv-fixes-signed-20211022' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  hyperv/vmbus: include linux/bitops.h

On arm64 randconfig builds, hyperv sometimes fails with this
error:

In file included from drivers/hv/hv_trace.c:3:
In file included from drivers/hv/hyperv_vmbus.h:16:
In file included from arch/arm64/include/asm/sync_bitops.h:5:
arch/arm64/include/asm/bitops.h:11:2: error: only <linux/bitops.h> can be included directly
In file included from include/asm-generic/bitops/hweight.h:5:
include/asm-generic/bitops/arch_hweight.h:9:9: error: implicit declaration of function '__sw_hweight32' [-Werror,-Wimplicit-function-declaration]
include/asm-generic/bitops/atomic.h:17:7: error: implicit declaration of function 'BIT_WORD' [-Werror,-Wimplicit-function-declaration]

Include the correct header first.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211018131929.2260087-1-arnd@kernel.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>

Pull ACPI fixes from Rafael Wysocki:
 "These fix two regressions, one related to ACPI power resources
  management and one that broke ACPI tools compilation.

  Specifics:

   - Stop turning off unused ACPI power resources in an unknown state to
     address a regression introduced during the 5.14 cycle (Rafael
     Wysocki).

   - Fix an ACPI tools build issue introduced recently when the minimal
     stdarg.h was added (Miguel Bernal Marin)"

* tag 'acpi-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: PM: Do not turn off power resources in unknown state
  ACPI: tools: fix compilation error

Pull more x86 kvm fixes from Paolo Bonzini:

 - Cache coherency fix for SEV live migration

 - Fix for instruction emulation with PKU

 - fixes for rare delaying of interrupt delivery

 - fix for SEV-ES buffer overflow

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SEV-ES: go over the sev_pio_data buffer in multiple passes if needed
  KVM: SEV-ES: keep INS functions together
  KVM: x86: remove unnecessary arguments from complete_emulator_pio_in
  KVM: x86: split the two parts of emulator_pio_in
  KVM: SEV-ES: clean up kvm_sev_es_ins/outs
  KVM: x86: leave vcpu->arch.pio.count alone in emulator_pio_in_out
  KVM: SEV-ES: rename guest_ins_data to sev_pio_data
  KVM: SEV: Flush cache on non-coherent systems before RECEIVE_UPDATE_DATA
  KVM: MMU: Reset mmu->pkru_mask to avoid stale data
  KVM: nVMX: promptly process interrupts delivered while in guest mode
  KVM: x86: check for interrupts before deciding whether to exit the fast path

Merge a fix for a recent ACPI tools bild regresson.

* acpi-tools:
  ACPI: tools: fix compilation error

The PIO scratch buffer is larger than a single page, and therefore
it is not possible to copy it in a single step to vcpu->arch/pio_data.
Bound each call to emulator_pio_in/out to a single page; keep
track of how many I/O operations are left in vcpu->arch.sev_pio_count,
so that the operation can be restarted in the complete_userspace_io
callback.

For OUT, this means that the previous kvm_sev_es_outs implementation
becomes an iterator of the loop, and we can consume the sev_pio_data
buffer before leaving to userspace.

For IN, instead, consuming the buffer and decreasing sev_pio_count
is always done in the complete_userspace_io callback, because that
is when the memcpy is done into sev_pio_data.

Cc: stable@vger.kernel.org
Fixes: 7ed9abfe

 ("KVM: SVM: Support string IO operations for an SEV-ES guest")
Reported-by: Felix Wilhelm <fwilhelm@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Make the diff a little nicer when we actually get to fixing
the bug.  No functional change intended.

Cc: stable@vger.kernel.org
Fixes: 7ed9abfe

 ("KVM: SVM: Support string IO operations for an SEV-ES guest")
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

complete_emulator_pio_in can expect that vcpu->arch.pio has been filled in,
and therefore does not need the size and count arguments.  This makes things
nicer when the function is called directly from a complete_userspace_io
callback.

No functional change intended.

Cc: stable@vger.kernel.org
Fixes: 7ed9abfe

 ("KVM: SVM: Support string IO operations for an SEV-ES guest")
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

emulator_pio_in handles both the case where the data is pending in
vcpu->arch.pio.count, and the case where I/O has to be done via either
an in-kernel device or a userspace exit.  For SEV-ES we would like
to split these, to identify clearly the moment at which the
sev_pio_data is consumed.  To this end, create two different
functions: __emulator_pio_in fills in vcpu->arch.pio.count, while
complete_emulator_pio_in clears it and releases vcpu->arch.pio.data.

Because this patch has to be backported, things are left a bit messy.
kernel_pio() operates on vcpu->arch.pio, which leads to emulator_pio_in()
having with two calls to complete_emulator_pio_in().  It will be fixed
in the next release.

While at it, remove the unused void* val argument of emulator_pio_in_out.
The function currently hardcodes vcpu->arch.pio_data as the
source/destination buffer, which sucks but will be fixed after the more
severe SEV-ES buffer overflow.

No functional change intended.

Cc: stable@vger.kernel.org
Fixes: 7ed9abfe

 ("KVM: SVM: Support string IO operations for an SEV-ES guest")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

A few very small cleanups to the functions, smushed together because
the patch is already very small like this:

- inline emulator_pio_in_emulated and emulator_pio_out_emulated,
  since we already have the vCPU

- remove the data argument and pull setting vcpu->arch.sev_pio_data into
  the caller

- remove unnecessary clearing of vcpu->arch.pio.count when
  emulation is done by the kernel (and therefore vcpu->arch.pio.count
  is already clear on exit from emulator_pio_in and emulator_pio_out).

No functional change intended.

Cc: stable@vger.kernel.org
Fixes: 7ed9abfe

 ("KVM: SVM: Support string IO operations for an SEV-ES guest")
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Currently emulator_pio_in clears vcpu->arch.pio.count twice if
emulator_pio_in_out performs kernel PIO.  Move the clear into
emulator_pio_out where it is actually necessary.

No functional change intended.

Cc: stable@vger.kernel.org
Fixes: 7ed9abfe

 ("KVM: SVM: Support string IO operations for an SEV-ES guest")
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

We will be using this field for OUTS emulation as well, in case the
data that is pushed via OUTS spans more than one page.  In that case,
there will be a need to save the data pointer across exits to userspace.

So, change the name to something that refers to any kind of PIO.
Also spell out what it is used for, namely SEV-ES.

No functional change intended.

Cc: stable@vger.kernel.org
Fixes: 7ed9abfe

 ("KVM: SVM: Support string IO operations for an SEV-ES guest")
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull drm fixes from Dave Airlie:
 "Nothing too crazy at the end of the cycle, the kmb modesetting fixes
  are probably a bit large but it's not a major driver, and its fixing
  monitor doesn't turn on type problems.

  Otherwise it's just a few minor patches, one ast regression revert, an
  msm power stability fix.

  ast:
   - fix regression with connector detect

  msm:
   - fix power stability issue

  msxfb:
   - fix crash on unload

  panel:
   - sync fix

  kmb:
   - modesetting fixes"

* tag 'drm-fixes-2021-10-22' of git://anongit.freedesktop.org/drm/drm:
  Revert "drm/ast: Add detect function support"
  drm/kmb: Enable ADV bridge after modeset
  drm/kmb: Corrected typo in handle_lcd_irq
  drm/kmb: Disable change of plane parameters
  drm/kmb: Remove clearing DPHY regs
  drm/kmb: Limit supported mode to 1080p
  drm/kmb: Work around for higher system clock
  drm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panel
  drm: mxsfb: Fix NULL pointer dereference crash on unload
  drm/msm/devfreq: Restrict idle clamping to a618 for now

Vladimir Zapolskiy reports:

Commit a7259df7 ("memblock: make memblock_find_in_range method
private") invokes a kernel panic while running kmemleak on OF platforms
with nomaped regions:

  Unable to handle kernel paging request at virtual address fff000021e00000
  [...]
    scan_block+0x64/0x170
    scan_gray_list+0xe8/0x17c
    kmemleak_scan+0x270/0x514
    kmemleak_write+0x34c/0x4ac

The memory allocated from memblock is registered with kmemleak, but if
it is marked MEMBLOCK_NOMAP it won't have linear map entries so an
attempt to scan such areas will fault.

Ideally, memblock_mark_nomap() would inform kmemleak to ignore
MEMBLOCK_NOMAP memory, but it can be called before kmemleak interfaces
operating on physical addresses can use __va() conversion.

Make sure that functions that mark allocated memory as MEMBLOCK_NOMAP
take care of informing kmemleak to ignore such memory.

Link: https://lore.kernel.org/all/8ade5174-b143-d621-8c8e-dc6a1898c6fb@linaro.org
Link: https://lore.kernel.org/all/c30ff0a2-d196-c50d-22f0-bd50696b1205@quicinc.com
Fixes: a7259df7

 ("memblock: make memblock_find_in_range method private")
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 6e44bd6d ("memblock: exclude NOMAP regions from kmemleak")
breaks boot on EFI systems with kmemleak and VM_DEBUG enabled:

  efi: Processing EFI memory map:
  efi:   0x000090000000-0x000091ffffff [Conventional|   |  |  |  |  |  |  |  |  |   |WB|WT|WC|UC]
  efi:   0x000092000000-0x0000928fffff [Runtime Data|RUN|  |  |  |  |  |  |  |  |   |WB|WT|WC|UC]
  ------------[ cut here ]------------
  kernel BUG at mm/kmemleak.c:1140!
  Internal error: Oops - BUG: 0 [#1] SMP
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc6-next-20211019+ #104
  pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc : kmemleak_free_part_phys+0x64/0x8c
  lr : kmemleak_free_part_phys+0x38/0x8c
  sp : ffff800011eafbc0
  x29: ffff800011eafbc0 x28: 1fffff7fffb41c0d x27: fffffbfffda0e068
  x26: 0000000092000000 x25: 1ffff000023d5f94 x24: ffff800011ed84d0
  x23: ffff800011ed84c0 x22: ffff800011ed83d8 x21: 0000000000900000
  x20: ffff800011782000 x19: 0000000092000000 x18: ffff800011ee0730
  x17: 0000000000000000 x16: 0000000000000000 x15: 1ffff0000233252c
  x14: ffff800019a905a0 x13: 0000000000000001 x12: ffff7000023d5ed7
  x11: 1ffff000023d5ed6 x10: ffff7000023d5ed6 x9 : dfff800000000000
  x8 : ffff800011eaf6b7 x7 : 0000000000000001 x6 : ffff800011eaf6b0
  x5 : 00008ffffdc2a12a x4 : ffff7000023d5ed7 x3 : 1ffff000023dbf99
  x2 : 1ffff000022f0463 x1 : 0000000000000000 x0 : ffffffffffffffff
  Call trace:
   kmemleak_free_part_phys+0x64/0x8c
   memblock_mark_nomap+0x5c/0x78
   reserve_regions+0x294/0x33c
   efi_init+0x2d0/0x490
   setup_arch+0x80/0x138
   start_kernel+0xa0/0x3ec
   __primary_switched+0xc0/0xc8
  Code: 34000041 97d526e7 f9418e80 36000040 (d4210000)
  random: get_random_bytes called from print_oops_end_marker+0x34/0x80 with crng_init=0
  ---[ end trace 0000000000000000 ]---

The crash happens because kmemleak_free_part_phys() tries to use __va()
before memstart_addr is initialized and this triggers a VM_BUG_ON() in
arch/arm64/include/asm/memory.h:

Revert 6e44bd6d

 ("memblock: exclude NOMAP regions from kmemleak"),
the issue it is fixing will be fixed differently.

Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>