- Mar 05, 2012
-
-
Avi Kivity authored
Currently we treat MOVSX/MOVZX with a byte source as a byte instruction, and change the destination operand size with a hack. Change it to be a word instruction, so the destination receives its natural size, and change the source to be SrcMem8. Signed-off-by:
Avi Kivity <avi@redhat.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com>
-
Avi Kivity authored
Useful for MOVSX/MOVZX. Signed-off-by:
Avi Kivity <avi@redhat.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com>
-
Scott Wood authored
Instead of keeping separate copies of struct kvm_vcpu_arch_shared (one in the code, one in the docs) that inevitably fail to be kept in sync (already sr[] is missing from the doc version), just point to the header file as the source of documentation on the contents of the magic page. Signed-off-by:
Scott Wood <scottwood@freescale.com> Acked-by:
Avi Kivity <avi@redhat.com> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Alexander Graf authored
We need the KVM_REG namespace for generic register settings now, so let's rename the existing users to something different, enabling us to reuse the namespace for more visible interfaces. While at it, also move these private constants to a private header. Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Paul Mackerras authored
This moves the get/set_one_reg implementation down from powerpc.c into booke.c, book3s_pr.c and book3s_hv.c. This avoids #ifdefs in C code, but more importantly, it fixes a bug on Book3s HV where we were accessing beyond the end of the kvm_vcpu struct (via the to_book3s() macro) and corrupting memory, causing random crashes and file corruption. On Book3s HV we only accept setting the HIOR to zero, since the guest runs in supervisor mode and its vectors are never offset from zero. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> [agraf update to apply on top of changed ONE_REG patches] Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Alexander Graf authored
Until now, we always set HIOR based on the PVR, but this is just wrong. Instead, we should be setting HIOR explicitly, so user space can decide what the initial HIOR value is - just like on real hardware. We keep the old PVR based way around for backwards compatibility, but once user space uses the SET_ONE_REG based method, we drop the PVR logic. Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Alexander Graf authored
Right now we transfer a static struct every time we want to get or set registers. Unfortunately, over time we realize that there are more of these than we thought of before and the extensibility and flexibility of transferring a full struct every time is limited. So this is a new approach to the problem. With these new ioctls, we can get and set a single register that is identified by an ID. This allows for very precise and limited transmittal of data. When we later realize that it's a better idea to shove over multiple registers at once, we can reuse most of the infrastructure and simply implement a GET_MANY_REGS / SET_MANY_REGS interface. Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Sasha Levin authored
Currently the code kzalloc()s new VCPUs instead of using the kmem_cache which is created when KVM is initialized. Modify it to allocate VCPUs from that kmem_cache. Signed-off-by:
Sasha Levin <levinsasha928@gmail.com> Acked-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Liu Yu authored
The existing kvm_stlb_write/kvm_gtlb_write were a poor match for the e500/book3e MMU -- mas1 was passed as "tid", mas2 was limited to "unsigned int" which will be a problem on 64-bit, mas3/7 got split up rather than treated as a single 64-bit word, etc. Signed-off-by:
Liu Yu <yu.liu@freescale.com> [scottwood@freescale.com: made mas2 64-bit, and added mas8 init] Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Paul Mackerras authored
This changes the implementation of kvm_vm_ioctl_get_dirty_log() for Book3s HV guests to use the hardware C (changed) bits in the guest hashed page table. Since this makes the implementation quite different from the Book3s PR case, this moves the existing implementation from book3s.c to book3s_pr.c and creates a new implementation in book3s_hv.c. That implementation calls kvmppc_hv_get_dirty_log() to do the actual work by calling kvm_test_clear_dirty on each page. It iterates over the HPTEs, clearing the C bit if set, and returns 1 if any C bit was set (including the saved C bit in the rmap entry). Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Paul Mackerras authored
This uses the host view of the hardware R (referenced) bit to speed up kvm_age_hva() and kvm_test_age_hva(). Instead of removing all the relevant HPTEs in kvm_age_hva(), we now just reset their R bits if set. Also, kvm_test_age_hva() now scans the relevant HPTEs to see if any of them have R set. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Paul Mackerras authored
This allows both the guest and the host to use the referenced (R) and changed (C) bits in the guest hashed page table. The guest has a view of R and C that is maintained in the guest_rpte field of the revmap entry for the HPTE, and the host has a view that is maintained in the rmap entry for the associated gfn. Both view are updated from the guest HPT. If a bit (R or C) is zero in either view, it will be initially set to zero in the HPTE (or HPTEs), until set to 1 by hardware. When an HPTE is removed for any reason, the R and C bits from the HPTE are ORed into both views. We have to be careful to read the R and C bits from the HPTE after invalidating it, but before unlocking it, in case of any late updates by the hardware. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Paul Mackerras authored
This reworks the implementations of the H_REMOVE and H_BULK_REMOVE hcalls to make sure that we keep the HPTE locked and in the reverse- mapping chain until we have finished invalidating it. Previously we would remove it from the chain and unlock it before invalidating it, leaving a tiny window when the guest could access the page even though we believe we have removed it from the guest (e.g., kvm_unmap_hva() has been called for the page and has found no HPTEs in the chain). In addition, we'll need this for future patches where we will need to read the R and C bits in the HPTE after invalidating it. Doing this required restructuring kvmppc_h_bulk_remove() substantially. Since we want to batch up the tlbies, we now need to keep several HPTEs locked simultaneously. In order to avoid possible deadlocks, we don't spin on the HPTE bitlock for any except the first HPTE in a batch. If we can't acquire the HPTE bitlock for the second or subsequent HPTE, we terminate the batch at that point, do the tlbies that we have accumulated so far, unlock those HPTEs, and then start a new batch to do the remaining invalidations. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Matt Evans authored
PPC KVM lacks these two capabilities, and as such a userland system must assume a max of 4 VCPUs (following api.txt). With these, a userland can determine a more realistic limit. Signed-off-by:
Matt Evans <matt@ozlabs.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Matt Evans authored
Fix usage of vcpu struct before check that it's actually valid. Signed-off-by:
Matt Evans <matt@ozlabs.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Paul Mackerras authored
With this, if a guest does an H_ENTER with a read/write HPTE on a page which is currently read-only, we make the actual HPTE inserted be a read-only version of the HPTE. We now intercept protection faults as well as HPTE not found faults, and for a protection fault we work out whether it should be reflected to the guest (e.g. because the guest HPTE didn't allow write access to usermode) or handled by switching to kernel context and calling kvmppc_book3s_hv_page_fault, which will then request write access to the page and update the actual HPTE. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Paul Mackerras authored
This adds an smp_wmb in kvm_mmu_notifier_invalidate_range_end() and an smp_rmb in mmu_notifier_retry() so that mmu_notifier_retry() will give the correct answer when called without kvm->mmu_lock being held. PowerPC Book3S HV KVM wants to use a bitlock per guest page rather than a single global spinlock in order to improve the scalability of updates to the guest MMU hashed page table, and so needs this. Signed-off-by:
Paul Mackerras <paulus@samba.org> Acked-by:
Avi Kivity <avi@redhat.com> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Paul Mackerras authored
This adds the infrastructure to enable us to page out pages underneath a Book3S HV guest, on processors that support virtualized partition memory, that is, POWER7. Instead of pinning all the guest's pages, we now look in the host userspace Linux page tables to find the mapping for a given guest page. Then, if the userspace Linux PTE gets invalidated, kvm_unmap_hva() gets called for that address, and we replace all the guest HPTEs that refer to that page with absent HPTEs, i.e. ones with the valid bit clear and the HPTE_V_ABSENT bit set, which will cause an HDSI when the guest tries to access them. Finally, the page fault handler is extended to reinstantiate the guest HPTE when the guest tries to access a page which has been paged out. Since we can't intercept the guest DSI and ISI interrupts on PPC970, we still have to pin all the guest pages on PPC970. We have a new flag, kvm->arch.using_mmu_notifiers, that indicates whether we can page guest pages out. If it is not set, the MMU notifier callbacks do nothing and everything operates as before. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Paul Mackerras authored
This provides the low-level support for MMIO emulation in Book3S HV guests. When the guest tries to map a page which is not covered by any memslot, that page is taken to be an MMIO emulation page. Instead of inserting a valid HPTE, we insert an HPTE that has the valid bit clear but another hypervisor software-use bit set, which we call HPTE_V_ABSENT, to indicate that this is an absent page. An absent page is treated much like a valid page as far as guest hcalls (H_ENTER, H_REMOVE, H_READ etc.) are concerned, except of course that an absent HPTE doesn't need to be invalidated with tlbie since it was never valid as far as the hardware is concerned. When the guest accesses a page for which there is an absent HPTE, it will take a hypervisor data storage interrupt (HDSI) since we now set the VPM1 bit in the LPCR. Our HDSI handler for HPTE-not-present faults looks up the hash table and if it finds an absent HPTE mapping the requested virtual address, will switch to kernel mode and handle the fault in kvmppc_book3s_hv_page_fault(), which at present just calls kvmppc_hv_emulate_mmio() to set up the MMIO emulation. This is based on an earlier patch by Benjamin Herrenschmidt, but since heavily reworked. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Paul Mackerras authored
This expands the reverse mapping array to contain two links for each HPTE which are used to link together HPTEs that correspond to the same guest logical page. Each circular list of HPTEs is pointed to by the rmap array entry for the guest logical page, pointed to by the relevant memslot. Links are 32-bit HPT entry indexes rather than full 64-bit pointers, to save space. We use 3 of the remaining 32 bits in the rmap array entries as a lock bit, a referenced bit and a present bit (the present bit is needed since HPTE index 0 is valid). The bit lock for the rmap chain nests inside the HPTE lock bit. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Paul Mackerras authored
This provides for the case where userspace maps an I/O device into the address range of a memory slot using a VM_PFNMAP mapping. In that case, we work out the pfn from vma->vm_pgoff, and record the cache enable bits from vma->vm_page_prot in two low-order bits in the slot_phys array entries. Then, in kvmppc_h_enter() we check that the cache bits in the HPTE that the guest wants to insert match the cache bits in the slot_phys array entry. However, we do allow the guest to create what it thinks is a non-cacheable or write-through mapping to memory that is actually cacheable, so that we can use normal system memory as part of an emulated device later on. In that case the actual HPTE we insert is a cacheable HPTE. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Paul Mackerras authored
This relaxes the requirement that the guest memory be provided as 16MB huge pages, allowing it to be provided as normal memory, i.e. in pages of PAGE_SIZE bytes (4k or 64k). To allow this, we index the kvm->arch.slot_phys[] arrays with a small page index, even if huge pages are being used, and use the low-order 5 bits of each entry to store the order of the enclosing page with respect to normal pages, i.e. log_2(enclosing_page_size / PAGE_SIZE). Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Paul Mackerras authored
This removes the code from kvmppc_core_prepare_memory_region() that looked up the VMA for the region being added and called hva_to_page to get the pfns for the memory. We have no guarantee that there will be anything mapped there at the time of the KVM_SET_USER_MEMORY_REGION ioctl call; userspace can do that ioctl and then map memory into the region later. Instead we defer looking up the pfn for each memory page until it is needed, which generally means when the guest does an H_ENTER hcall on the page. Since we can't call get_user_pages in real mode, if we don't already have the pfn for the page, kvmppc_h_enter() will return H_TOO_HARD and we then call kvmppc_virtmode_h_enter() once we get back to kernel context. That calls kvmppc_get_guest_page() to get the pfn for the page, and then calls back to kvmppc_h_enter() to redo the HPTE insertion. When the first vcpu starts executing, we need to have the RMO or VRMA region mapped so that the guest's real mode accesses will work. Thus we now have a check in kvmppc_vcpu_run() to see if the RMO/VRMA is set up and if not, call kvmppc_hv_setup_rma(). It checks if the memslot starting at guest physical 0 now has RMO memory mapped there; if so it sets it up for the guest, otherwise on POWER7 it sets up the VRMA. The function that does that, kvmppc_map_vrma, is now a bit simpler, as it calls kvmppc_virtmode_h_enter instead of creating the HPTE itself. Since we are now potentially updating entries in the slot_phys[] arrays from multiple vcpu threads, we now have a spinlock protecting those updates to ensure that we don't lose track of any references to pages. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Paul Mackerras authored
At present, our implementation of H_ENTER only makes one try at locking each slot that it looks at, and doesn't even retry the ldarx/stdcx. atomic update sequence that it uses to attempt to lock the slot. Thus it can return the H_PTEG_FULL error unnecessarily, particularly when the H_EXACT flag is set, meaning that the caller wants a specific PTEG slot. This improves the situation by making a second pass when no free HPTE slot is found, where we spin until we succeed in locking each slot in turn and then check whether it is full while we hold the lock. If the second pass fails, then we return H_PTEG_FULL. This also moves lock_hpte to a header file (since later commits in this series will need to use it from other source files) and renames it to try_lock_hpte, which is a somewhat less misleading name. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Paul Mackerras authored
This adds two new functions, kvmppc_pin_guest_page() and kvmppc_unpin_guest_page(), and uses them to pin the guest pages where the guest has registered areas of memory for the hypervisor to update, (i.e. the per-cpu virtual processor areas, SLB shadow buffers and dispatch trace logs) and then unpin them when they are no longer required. Although it is not strictly necessary to pin the pages at this point, since all guest pages are already pinned, later commits in this series will mean that guest pages aren't all pinned. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Paul Mackerras authored
This allocates an array for each memory slot that is added to store the physical addresses of the pages in the slot. This array is vmalloc'd and accessed in kvmppc_h_enter using real_vmalloc_addr(). This allows us to remove the ram_pginfo field from the kvm_arch struct, and removes the 64GB guest RAM limit that we had. We use the low-order bits of the array entries to store a flag indicating that we have done get_page on the corresponding page, and therefore need to call put_page when we are finished with the page. Currently this is set for all pages except those in our special RMO regions. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Paul Mackerras authored
This adds an array that parallels the guest hashed page table (HPT), that is, it has one entry per HPTE, used to store the guest's view of the second doubleword of the corresponding HPTE. The first doubleword in the HPTE is the same as the guest's idea of it, so we don't need to store a copy, but the second doubleword in the HPTE has the real page number rather than the guest's logical page number. This allows us to remove the back_translate() and reverse_xlate() functions. This "reverse mapping" array is vmalloc'd, meaning that to access it in real mode we have to walk the kernel's page tables explicitly. That is done by the new real_vmalloc_addr() function. (In fact this returns an address in the linear mapping, so the result is usable both in real mode and in virtual mode.) There are also some minor cleanups here: moving the definitions of HPT_ORDER etc. to a header file and defining HPT_NPTE for HPT_NPTEG << 3. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Paul Mackerras authored
When commit f43fdc15fa ("KVM: PPC: booke: Improve timer register emulation") factored out some code in arch/powerpc/kvm/powerpc.c into a new helper function, kvm_vcpu_kick(), an error crept in which causes Book3s HV guest vcpus to stall. This fixes it. On POWER7 machines, guest vcpus are grouped together into virtual CPU cores that share a single waitqueue, so it's important to use vcpu->arch.wqp rather than &vcpu->wq. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Liu Yu-B13201 authored
Currently we patch the whole code include paravirt template code. This isn't safe for scratch area and has impact to performance. Signed-off-by:
Liu Yu <yu.liu@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Scott Wood authored
The hardware maintains a per-set next victim hint. Using this reduces conflicts, especially on e500v2 where a single guest TLB entry is mapped to two shadow TLB entries (user and kernel). We want those two entries to go to different TLB ways. sesel is now only used for TLB1. Reported-by:
Liu Yu <yu.liu@freescale.com> Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Scott Wood authored
The associativity, not just total size, can differ from the host hardware. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Alexander Graf authored
As Scott put it: > If we get a signal after the check, we want to be sure that we don't > receive the reschedule IPI until after we're in the guest, so that it > will cause another signal check. we need to have interrupts disabled from the point we do signal_check() all the way until we actually enter the guest. This patch fixes potential signal loss races. Reported-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Alexander Graf authored
Our vcpu kick implementation differs a bit from x86 which resulted in us not disabling preemption during the kick. Get it a bit closer to what x86 does. Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Alexander Graf authored
When running the 64-bit Book3s PR code without CONFIG_PREEMPT_NONE, we were doing a few things wrong, most notably access to PACA fields without making sure that the pointers stay stable accross the access (preempt_disable()). This patch moves to_svcpu towards a get/put model which allows us to disable preemption while accessing the shadow vcpu fields in the PACA. That way we can run preemptible and everyone's happy! Reported-by:
Jörg Sommer <joerg@alea.gnuu.de> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Alexander Graf authored
Somewhere during merges we ended up from local_irq_enable() foo(); local_irq_disable() to always keeping irqs enabled during that part. However, we now have the following code: foo(); local_irq_disable() which disables interrupts without the surrounding code enabling them again! So let's remove that disable and be happy. Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Alexander Graf authored
When entering the guest, we want to make sure we're not getting preempted away, so let's disable preemption on entry, but enable it again while handling guest exits. Reported-by:
Jörg Sommer <joerg@alea.gnuu.de> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Scott Wood authored
Decrementers are now properly driven by TCR/TSR, and the guest has full read/write access to these registers. The decrementer keeps ticking (and setting the TSR bit) regardless of whether the interrupts are enabled with TCR. The decrementer stops at zero, rather than going negative. Decrementers (and FITs, once implemented) are delivered as level-triggered interrupts -- dequeued when the TSR bit is cleared, not on delivery. Signed-off-by:
Liu Yu <yu.liu@freescale.com> [scottwood@freescale.com: significant changes] Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Scott Wood authored
This allows additional registers to be accessed by the guest in PR-mode KVM without trapping. SPRG4-7 are readable from userspace. On booke, KVM will sync these registers when it enters the guest, so that accesses from guest userspace will work. The guest kernel, OTOH, must consistently use either the real registers or the shared area between exits. This also applies to the already-paravirted SPRG3. On non-booke, it's not clear to what extent SPRG4-7 are supported (they're not architected for book3s, but exist on at least some classic chips). They are copied in the get/set regs ioctls, but I do not see any non-booke emulation. I also do not see any syncing with real registers (in PR-mode) including the user-readable SPRG3. This patch should not make that situation any worse. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Scott Wood authored
Also fix wrteei 1 paravirt to check for a pending interrupt. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Scott Wood authored
int_pending was only being lowered if a bit in pending_exceptions was cleared during exception delivery -- but for interrupts, we clear it during IACK/TSR emulation. This caused paravirt for enabling MSR[EE] to be ineffective. Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
Avi Kivity <avi@redhat.com>
-