Merge tag 'perf-core-for-mingo-4.21-20190103' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

perf c2c:

  Jiri Olsa:

  - Change the default coalesce setup to from '--coalesce pid,iaddr' to just '--coalesce iaddr'.

  - Increase the HITM ratio limit for displayed cachelines.

perf script:

  Andi Kleen:

  - Fix LBR skid dump problems in brstackinsn.

perf trace:

  Arnaldo Carvalho de Melo:

  - Check if the raw_syscalls:sys_{enter,exit} are setup before setting tp filter.

  - Do not hardcode the size of the tracepoint common_ fields.

  - Beautify USBDEFFS_ ioctl commands.

  Colin Ian King:

  - Use correct SECCOMP prefix spelling, "SECOMP_*" -> "SECCOMP_*".

perf python:

  Jiri Olsa:

  - Do not force closing original perf descriptor in evlist.get_pollfd().

tools misc:

  Jiri Olsa:

  - Allow overriding CFLAGS and LDFLAGS.

perf build:

  Stanislav Fomichev:

  - Don't unconditionally link the libbfd feature test to -liberty and -lz

thread-stack:

  Adrian Hunter:

  - Fix processing for the idle task, having a stack per cpu.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Add a comment to perf_session__register_idle_thread() to bring attention to
a pitfall with the idle task thread structure. The pitfall is that there
should really be a 'struct thread' for the idle task of each cpu, but there
is only one that can have pid == tid == 0.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181221120620.9659-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf creates a single 'struct thread' to represent the idle task. That
is because threads are identified by PID and TID, and the idle task
always has PID == TID == 0.

However, there are actually separate idle tasks for each CPU. That
creates a problem for thread stack processing which assumes that each
thread has a single stack, not one stack per CPU.

Fix that by passing through the CPU number, and in the case of the idle
"thread", pick the thread stack from an array based on the CPU number.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181221120620.9659-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In preparation for fixing thread stack processing for the idle task,
allocate an array of thread stacks.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181221120620.9659-7-adrian.hunter@intel.com
[ No need to check for NULL when calling zfree(), noticed by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In preparation for fixing thread stack processing for the idle task,
factor out thread_stack__init().

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181221120620.9659-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In preparation for fixing thread stack processing for the idle task,
allow for a thread stack array.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181221120620.9659-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In preparation for fixing thread stack processing for the idle task,
avoid direct reference to the thread's stack. The thread stack will
change to an array of thread stacks, at which point the meaning of the
direct reference will change.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181221120620.9659-4-adrian.hunter@intel.com
[ Rename thread_stack__ts() to thread__stack() since this operates on a 'thread' struct ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In preparation for fixing thread stack processing for the idle task,
tidy thread_stack__bottom() usage. Specifically, the parameter 'thread'
is not needed.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181221120620.9659-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In preparation for fixing thread stack processing for the idle task,
simplify some code in thread_stack__process().

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181221120620.9659-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So that the user can specify outside CFLAGS values.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de> <knaack.h@gmx.de>
Cc: Herton Krzesinski <herton@redhat.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Link: http://lkml.kernel.org/r/20181212102537.25902-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So that the user can specify outside CFLAGS/LDFLAGS values.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Herton Krzesinski <herton@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Link: http://lkml.kernel.org/r/20181212102537.25902-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So that the user can provide, e.g. distro package alternative values.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Herton Krzesinski  <herton@redhat.com>
Cc: Markus Mayer <mmayer@broadcom.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: http://lkml.kernel.org/r/20181212102537.25902-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So user could specify outside CFLAGS/LDFLAGS values.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Herton Krzesinski <herton@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Link: https://lkml.kernel.org/r/20181212102537.25902-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The cachelines being reported are the ones with percentages all the way
down to 0.05%.  That makes for very long output files. Raising that to
0.1%.  The user can always specify --show-all if they want all the
cachelines with hits.

Suggested-by: Joe Mario <jmario@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181228101820.28010-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Joe suggested to have the coalesce default set just to 'iaddr', because
it's easier to read on the default 'perf c2c report' output.

By removing the "pid" field from the default -c/--coalesce option, the
'perf c2c' report will group all the relevant PIDs under the instruction
address ('iaddr') bucket. User can always run "-c pid,iaddr" for a more
fine grained output on particular PIDs.

Suggested-by: Joe Mario <jmario@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181228101820.28010-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

For instance, while debugging the 'galileo' python utility to
synchronize fitbit trackers:

  # perf trace -e ioctl ./run --force
  ioctl(0</dev/pts/8>, TCSETS, 0x7ffe28666420) = 0
  ioctl(0</dev/pts/8>, TCSETS, 0x7ffe28666290) = 0
  ioctl(1</dev/pts/8>, TCSETS, 0x7ffe28666290) = 0
  ioctl(2</dev/pts/8>, TCSETS, 0x7ffe28666290) = 0
  ioctl(3</home/acme/hg/galileo/run>, TCSETS, 0x7ffe286663f0) = -1 ENOTTY (Inappropriate ioctl for device)
  ioctl(1</dev/pts/8>, TCSETS, 0x7ffe286655a0) = 0
  ioctl(1</dev/pts/8>, TCSETS, 0x7ffe28665470) = 0
  ioctl(1</dev/pts/8>, TCSETS, 0x7ffe28665470) = 0
  ioctl(1</dev/pts/8>, TCSETS, 0x7ffe286654a0) = 0
  ioctl(1</dev/pts/8>, TCSETS, 0x7ffe286654a0) = 0
  ioctl(1</dev/pts/8>, TCSETS, 0x7ffe28665400) = 0
  ioctl(1</dev/pts/8>, TIOCSWINSZ, 0x7ffe286654c0) = 0
  ioctl(0</dev/pts/8>, TIOCSWINSZ, 0x7ffe28665560) = 0
  ioctl(0</dev/pts/8>, TIOCSWINSZ, 0x7ffe28665560) = 0
  ioctl(0</dev/pts/8>, TIOCMGET, 0x7ffe28665560) = 0
  ioctl(0</dev/pts/8>, TCSETS, 0x7ffe28665530) = 0
  ioctl(10</dev/bus/usb/001/011>, USBDEVFS_GET_CAPABILITIES, 0x561468dad048) = 0
  ioctl(10</dev/bus/usb/001/011>, USBDEVFS_GETDRIVER, 0x7ffe28665500) = -1 ENODATA (No data available)
  ioctl(10</dev/bus/usb/001/011>, USBDEVFS_GETDRIVER, 0x7ffe28665500) = -1 ENODATA (No data available)
  ioctl(10</dev/bus/usb/001/011>, USBDEVFS_SETCONFIGURATION, 0x7ffe2866513c) = 0
  ioctl(10</dev/bus/usb/001/011>, USBDEVFS_CLAIMINTERFACE, 0x7ffe286647bc) = 0
  ioctl(10</dev/bus/usb/001/011>, USBDEVFS_SUBMITURB, 0x561468dace40) = 0
  ioctl(10</dev/bus/usb/001/011>, USBDEVFS_REAPURBNDELAY, 0x7ffe28664c10) = 0
  ioctl(10</dev/bus/usb/001/011>, USBDEVFS_REAPURBNDELAY, 0x7ffe28664c10) = -1 EAGAIN (Resource temporarily unavailable)
  ioctl(10</dev/bus/usb/001/011>, USBDEVFS_SUBMITURB, 0x561468dace40) = 0
  ioctl(10</dev/bus/usb/001/011>, USBDEVFS_REAPURBNDELAY, 0x7ffe28664dd0) = 0
  ioctl(10</dev/bus/usb/001/011>, USBDEVFS_REAPURBNDELAY, 0x7ffe28664dd0) = -1 EAGAIN (Resource temporarily unavailable)
  <SNIP>
  ioctl(10</dev/bus/usb/001/011>, USBDEVFS_SUBMITURB, 0x561468e72ec0) = 0
  ioctl(10</dev/bus/usb/001/011>, USBDEVFS_REAPURBNDELAY, 0x7ffe28664cc0) = 0
  ioctl(10</dev/bus/usb/001/011>, USBDEVFS_REAPURBNDELAY, 0x7ffe28664cc0) = -1 EAGAIN (Resource temporarily unavailable)
  ioctl(10</dev/bus/usb/001/011>, USBDEVFS_RELEASEINTERFACE, 0x7ffe2866463c) = 0
  ioctl(10</dev/bus/usb/001/011>, USBDEVFS_RELEASEINTERFACE, 0x7ffe2866463c) = 0
  Tracker: 813F4690C3D1: Synchronisation successful
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-6x2cawak7jno3gpp5pagzj50@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So that beautifiers can access things like dev_maj.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-wm5o51f206c5pi063dsaeraq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

That ends up generating this:

  [acme@quaco perf]$ cat /tmp/build/perf/trace/beauty/generated/ioctl/usbdevfs_ioctl_array.c
  static const char *usbdevfs_ioctl_cmds[] = {
	[0] = "CONTROL",
	[10] = "SUBMITURB",
	[11] = "DISCARDURB",
	[12] = "REAPURB",
	[13] = "REAPURBNDELAY",
	[14] = "DISCSIGNAL",
	[15] = "CLAIMINTERFACE",
	[16] = "RELEASEINTERFACE",
	[17] = "CONNECTINFO",
	[18] = "IOCTL",
	[19] = "HUB_PORTINFO",
	[2] = "BULK",
	[20] = "RESET",
	[21] = "CLEAR_HALT",
	[22] = "DISCONNECT",
	[23] = "CONNECT",
	[24] = "CLAIM_PORT",
	[25] = "RELEASE_PORT",
	[26] = "GET_CAPABILITIES",
	[27] = "DISCONNECT_CLAIM",
	[28] = "ALLOC_STREAMS",
	[29] = "FREE_STREAMS",
	[3] = "RESETEP",
	[30] = "DROP_PRIVILEGES",
	[31] = "GET_SPEED",
	[4] = "SETINTERFACE",
	[5] = "SETCONFIGURATION",
	[8] = "GETDRIVER",
  };

  #if 0
  static const char *usbdevfs_ioctl_32_cmds[] = {
	[0] = "CONTROL32",
	[10] = "SUBMITURB32",
	[12] = "REAPURB32",
	[13] = "REAPURBNDELAY32",
	[14] = "DISCSIGNAL32",
	[18] = "IOCTL32",
	[2] = "BULK32",
  };
  #endif
  $

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-hkam6lt1g806l0p4b7buif3n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Will be associated with fds with the right device major.

  $ tools/perf/trace/beauty/usbdevfs_ioctl.sh
  static const char *usbdevfs_ioctl_cmds[] = {
	[0] = "CONTROL",
	[10] = "SUBMITURB",
	[11] = "DISCARDURB",
	[12] = "REAPURB",
	[13] = "REAPURBNDELAY",
	[14] = "DISCSIGNAL",
	[15] = "CLAIMINTERFACE",
	[16] = "RELEASEINTERFACE",
	[17] = "CONNECTINFO",
	[18] = "IOCTL",
	[19] = "HUB_PORTINFO",
	[20] = "RESET",
	[21] = "CLEAR_HALT",
	[22] = "DISCONNECT",
	[23] = "CONNECT",
	[24] = "CLAIM_PORT",
	[25] = "RELEASE_PORT",
	[26] = "GET_CAPABILITIES",
	[27] = "DISCONNECT_CLAIM",
	[28] = "ALLOC_STREAMS",
	[29] = "FREE_STREAMS",
	[2] = "BULK",
	[30] = "DROP_PRIVILEGES",
	[31] = "GET_SPEED",
	[3] = "RESETEP",
	[4] = "SETINTERFACE",
	[5] = "SETCONFIGURATION",
	[8] = "GETDRIVER",
  };

  #if 0
  static const char *usbdevfs_ioctl_32_cmds[] = {
	[0] = "CONTROL32",
	[10] = "SUBMITURB32",
	[12] = "REAPURB32",
	[13] = "REAPURBNDELAY32",
	[14] = "DISCSIGNAL32",
	[18] = "IOCTL32",
	[2] = "BULK32",
  };
  #endif
  $

Leaving the '32' variants commented, later we can try to support those
as well, from some other hint (maybe something about the thread issuing
the ioctls) and from the _IOC_SIZE(cmd).

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-neq1lrji5k4ku0rktn7ytnri@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Will be used to generate the string table for the USBDEVFS_ prefixed
ioctl commands.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-3vrm9b55tdhzn8sw9qazh4z5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We keep a table for the fds to map them back to pathnames when showing
'fd' based APIs such as write(), store as well the major number for the
device the path is in, to use in things like choosing the right ioctl
'cmd' beautifier.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-qjkds7bnk7v7fk2xhqsb0a4v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So that we can have that table expanded when setting other attributes.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-hzvpe3qwafe6sqcq3bhtbxds@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So that we can add more per file attributes besides the pathname, such
as which ioctl beautifier to use, for cases such as the sound and
usbdeffs ioctls, that both use the 'U' command, so we have to
differentiate at the major number for the device file.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-1895cmhrdz2dkl5prf2cj2yj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This is a fix for another instance of the skid problem Milian recently
found [1]

The LBRs don't freeze at the exact same time as the PMI is triggered.
The perf script brstackinsn code that dumps LBR assembler assumes that
the last branch in the LBR leads to the sample point.  But with skid
it's possible that the CPU executes one or more branches before the
sample, but which do not appear in the LBR.

What happens then is either that the sample point is before the last LBR
branch. In this case the dumper sees a negative length and ignores it.
Or it the sample point is long after the last branch. Then the dumper
sees a very long block and dumps it upto its block limit (16k bytes),
which is noise in the output.

On typical sample session this can happen regularly.

This patch tries to detect and handle the situation. On the last block
that is dumped by the LBR dumper we always stop on the first branch. If
the block length is negative just scan forward to the first branch.
Otherwise scan until a branch is found.

The PT decoder already has a function that uses the instruction decoder
to detect branches, so we can just reuse it here.

Then when a terminating branch is found print an indication and stop
dumping. This might miss a few instructions, but at least shows no
runaway blocks.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/r/20181120050617.4119-1-andi@firstfloor.org
[ Resolved conflict with dd2e18e9

 ("perf tools: Support 'srccode' output") ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Ondřej reported that when compiled with python3, the python extension
regresses in evlist.get_pollfd function behaviour.

The evlist.get_pollfd function creates file objects from evlist's fds
and returns them in a list. The python3 version also sets them to 'close
the original descriptor' when the object dies (is closed), by passing
True via the 'closefd' arg in the PyFile_FromFd call.

The python's closefd doc says:

  If closefd is False, the underlying file descriptor will be kept open
  when the file is closed.

That's why the following line in python3 closes all evlist fds:

  evlist.get_pollfd()

the returned list is immediately destroyed and that takes down the
original events fds.

Passing closefd as False to PyFile_FromFd to fix this.

Reported-by: Ondřej Lysoněk <olysonek@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jaroslav Škarvada <jskarvad@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 66dfdff0

 ("perf tools: Add Python 3 support")
Link: http://lkml.kernel.org/r/20181226112121.5285-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The spelling of the SECCOMP is incorrect, fix these.

Signed-off-by: Colin King <colin.king@canonical.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Fixes: c65c83ff

 ("perf trace: Allow asking for not suppressing common string prefixes")
Link: http://lkml.kernel.org/r/20181221084809.6108-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Caused by making the variable static:

  kernel/sched/fair.c:119:21: warning: 'capacity_margin' defined but not used [-Wunused-variable]

Seems easiest to just move it up under the existing ifdef CONFIG_SMP
that's a few lines above.

Fixes: ed8885a1

 ('sched/fair: Make some variables static')
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull x86 platform update from Ingo Molnar:
 "An OLPC platform support simplification patch"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/olpc: Do not call of_platform_bus_probe()

Pull x86 mm updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Update and clean up x86 fault handling, by Andy Lutomirski.

   - Drop usage of __flush_tlb_all() in kernel_physical_mapping_init()
     and related fallout, by Dan Williams.

   - CPA cleanups and reorganization by Peter Zijlstra: simplify the
     flow and remove a few warts.

   - Other misc cleanups"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
  x86/mm/dump_pagetables: Use DEFINE_SHOW_ATTRIBUTE()
  x86/mm/cpa: Rename @addrinarray to @numpages
  x86/mm/cpa: Better use CLFLUSHOPT
  x86/mm/cpa: Fold cpa_flush_range() and cpa_flush_array() into a single cpa_flush() function
  x86/mm/cpa: Make cpa_data::numpages invariant
  x86/mm/cpa: Optimize cpa_flush_array() TLB invalidation
  x86/mm/cpa: Simplify the code after making cpa->vaddr invariant
  x86/mm/cpa: Make cpa_data::vaddr invariant
  x86/mm/cpa: Add __cpa_addr() helper
  x86/mm/cpa: Add ARRAY and PAGES_ARRAY selftests
  x86/mm: Drop usage of __flush_tlb_all() in kernel_physical_mapping_init()
  x86/mm: Validate kernel_physical_mapping_init() PTE population
  generic/pgtable: Introduce set_pte_safe()
  generic/pgtable: Introduce {p4d,pgd}_same()
  generic/pgtable: Make {pmd, pud}_same() unconditionally available
  x86/fault: Clean up the page fault oops decoder a bit
  x86/fault: Decode page fault OOPSes better
  x86/vsyscall/64: Use X86_PF constants in the simulated #PF error code
  x86/oops: Show the correct CS value in show_regs()
  x86/fault: Don't try to recover from an implicit supervisor access
  ...

Pull x86 fpu updates from Ingo Molnar:
 "Misc preparatory changes for an upcoming FPU optimization that will
  delay the loading of FPU registers to return-to-userspace"

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Don't export __kernel_fpu_{begin,end}()
  x86/fpu: Update comment for __raw_xsave_addr()
  x86/fpu: Add might_fault() to user_insn()
  x86/pkeys: Make init_pkru_value static
  x86/thread_info: Remove _TIF_ALLWORK_MASK
  x86/process/32: Remove asm/math_emu.h include
  x86/fpu: Use unsigned long long shift in xfeature_uncompacted_offset()

Pull x86 cpu updates from Ingo Molnar:
 "Misc changes:

   - Fix nr_cpus= boot option interaction bug with logical package
     management

   - Clean up UMIP detection messages

   - Add WBNOINVD instruction detection

   - Remove the unused get_scattered_cpuid_leaf() function"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/topology: Use total_cpus for max logical packages calculation
  x86/umip: Make the UMIP activated message generic
  x86/umip: Print UMIP line only once
  x86/cpufeatures: Add WBNOINVD feature definition
  x86/cpufeatures: Remove get_scattered_cpuid_leaf()

Pull x86 cleanups from Ingo Molnar:
 "Misc cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kprobes: Remove trampoline_handler() prototype
  x86/kernel: Fix more -Wmissing-prototypes warnings
  x86: Fix various typos in comments
  x86/headers: Fix -Wmissing-prototypes warning
  x86/process: Avoid unnecessary NULL check in get_wchan()
  x86/traps: Complete prototype declarations
  x86/mce: Fix -Wmissing-prototypes warnings
  x86/gart: Rewrite early_gart_iommu_check() comment

Pull x86 build updates from Ingo Molnar:

 - Resolve LLVM build bug by removing redundant GNU specific flag

 - Remove obsolete -funit-at-a-time and -fno-unit-at-a-time use from x86
   PowerPC and UM.

   The UML change was seen and acked by UML maintainer Richard
   Weinberger.

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/um/vdso: Drop implicit common-page-size linker flag
  x86, powerpc: Remove -funit-at-a-time compiler option entirely
  x86/um: Remove -fno-unit-at-a-time workaround for pre-4.0 GCC

Pull x86 boot updates from Ingo Molnar:
 "Two cleanups"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Add missing va_end() to die()
  x86/boot: Simplify the detect_memory*() control flow

Pull x86 asm updates from Ingo Molnar:
 "Two changes:

   - Remove (some) remnants of the vDSO's fake section table mechanism
     that were left behind when the vDSO build process reverted to using
     "objdump -S" to strip the userspace image.

   - Remove hardcoded POPCNT mnemonics now that the minimum binutils
     version supports the symbolic form"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Remove a stale/misleading comment from the linker script
  x86/vdso: Remove obsolete "fake section table" reservation
  x86: Use POPCNT mnemonics in arch_hweight.h

Pull x86 AMD northbridge updates from Ingo Molnar:
 "Update DF/SMN access and k10temp for AMD F17h M30h, by Brian Woods:

   'Updates the data fabric/system management network code needed to get
    k10temp working for M30h. Since there are now processors which have
    multiple roots per DF/SMN interface, there needs to some logic which
    skips N-1 root complexes per DF/SMN interface. This is because the
    root complexes per interface are redundant (as far as DF/SMN goes).
    These changes shouldn't effect past processors and, for F17h M0Xh,
    the mappings stay the same.'

  The hwmon changes were seen and acked by hwmon maintainer Guenter Roeck"

* 'x86-amd-nb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hwmon/k10temp: Add support for AMD family 17h, model 30h CPUs
  x86/amd_nb: Add PCI device IDs for family 17h, model 30h
  x86/amd_nb: Add support for newer PCI topologies
  hwmon/k10temp, x86/amd_nb: Consolidate shared device IDs

Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Introduce "Energy Aware Scheduling" - by Quentin Perret.

     This is a coherent topology description of CPUs in cooperation with
     the PM subsystem, with the goal to schedule more energy-efficiently
     on asymetric SMP platform - such as waking up tasks to the more
     energy-efficient CPUs first, as long as the system isn't
     oversubscribed.

     For details of the design, see:

        https://lore.kernel.org/lkml/20180724122521.22109-1-quentin.perret@arm.com/

   - Misc cleanups and smaller enhancements"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  sched/fair: Select an energy-efficient CPU on task wake-up
  sched/fair: Introduce an energy estimation helper function
  sched/fair: Add over-utilization/tipping point indicator
  sched/fair: Clean-up update_sg_lb_stats parameters
  sched/toplogy: Introduce the 'sched_energy_present' static key
  sched/topology: Make Energy Aware Scheduling depend on schedutil
  sched/topology: Disable EAS on inappropriate platforms
  sched/topology: Add lowest CPU asymmetry sched_domain level pointer
  sched/topology: Reference the Energy Model of CPUs when available
  PM: Introduce an Energy Model management framework
  sched/cpufreq: Prepare schedutil for Energy Aware Scheduling
  sched/topology: Relocate arch_scale_cpu_capacity() to the internal header
  sched/core: Remove unnecessary unlikely() in push_*_task()
  sched/topology: Remove the ::smt_gain field from 'struct sched_domain'
  sched: Fix various typos in comments
  sched/core: Clean up the #ifdef block in add_nr_running()
  sched/fair: Make some variables static
  sched/core: Create task_has_idle_policy() helper
  sched/fair: Add lsub_positive() and use it consistently
  sched/fair: Mask UTIL_AVG_UNCHANGED usages
  ...

Pull perf updates from Ingo Molnar:
 "The main changes in this cycle on the kernel side:

   - rework kprobes blacklist handling (Masami Hiramatsu)

   - misc cleanups

  on the tooling side these areas were the main focus:

   - 'perf trace'     enhancements (Arnaldo Carvalho de Melo)

   - 'perf bench'     enhancements (Davidlohr Bueso)

   - 'perf record'    enhancements (Alexey Budankov)

   - 'perf annotate'  enhancements (Jin Yao)

   - 'perf top'       enhancements (Jiri Olsa)

   - Intel hw tracing enhancements (Adrian Hunter)

   - ARM hw tracing   enhancements (Leo Yan, Mathieu Poirier)

   - ... plus lots of other enhancements, cleanups and fixes"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (171 commits)
  tools uapi asm: Update asm-generic/unistd.h copy
  perf symbols: Relax checks on perf-PID.map ownership
  perf trace: Wire up the fadvise 'advice' table generator
  perf beauty: Add generator for fadvise64's 'advice' arg constants
  tools headers uapi: Grab a copy of fadvise.h
  perf beauty mmap: Print mmap's 'offset' arg in hexadecimal
  perf beauty mmap: Print PROT_READ before PROT_EXEC to match strace output
  perf trace beauty: Beautify arch_prctl()'s arguments
  perf trace: When showing string prefixes show prefix + ??? for unknown entries
  perf trace: Move strarrays to beauty.h for further reuse
  perf beauty: Wire up the x86_arch prctl code table generator
  perf beauty: Add a string table generator for x86's 'arch_prctl' codes
  tools include arch: Grab a copy of x86's prctl.h
  perf trace: Show NULL when syscall pointer args are 0
  perf trace: Enclose the errno strings with ()
  perf augmented_raw_syscalls: Copy 'access' arg as well
  perf trace: Add alignment spaces after the closing parens
  perf trace beauty: Print O_RDONLY when (flags & O_ACCMODE) == 0
  perf trace: Allow asking for not suppressing common string prefixes
  perf trace: Add a prefix member to the strarray class
  ...

Pull locking updates from Ingo Molnar:
 "The main change in this cycle are initial preparatory bits of dynamic
  lockdep keys support from Bart Van Assche.

  There are also misc changes, a comment cleanup and a data structure
  cleanup"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Clean up comment in nohz_idle_balance()
  locking/lockdep: Stop using RCU primitives to access 'all_lock_classes'
  locking/lockdep: Make concurrent lockdep_reset_lock() calls safe
  locking/lockdep: Remove a superfluous INIT_LIST_HEAD() statement
  locking/lockdep: Introduce lock_class_cache_is_registered()
  locking/lockdep: Inline __lockdep_init_map()
  locking/lockdep: Declare local symbols static
  tools/lib/lockdep/tests: Test the lockdep_reset_lock() implementation
  tools/lib/lockdep: Add dummy print_irqtrace_events() implementation
  tools/lib/lockdep: Rename "trywlock" into "trywrlock"
  tools/lib/lockdep/tests: Run lockdep tests a second time under Valgrind
  tools/lib/lockdep/tests: Improve testing accuracy
  tools/lib/lockdep/tests: Fix shellcheck warnings
  tools/lib/lockdep/tests: Display compiler warning and error messages
  locking/lockdep: Remove ::version from lock_class structure

Pull EFI updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Allocate the E820 buffer before doing the
     GetMemoryMap/ExitBootServices dance so we don't run out of space

   - Clear EFI boot services mappings when freeing the memory

   - Harden efivars against callers that invoke it on non-EFI boots

   - Reduce the number of memblock reservations resulting from extensive
     use of the new efi_mem_reserve_persistent() API

   - Other assorted fixes and cleanups"

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Don't unmap EFI boot services code/data regions for EFI_OLD_MEMMAP and EFI_MIXED_MODE
  efi: Reduce the amount of memblock reservations for persistent allocations
  efi: Permit multiple entries in persistent memreserve data structure
  efi/libstub: Disable some warnings for x86{,_64}
  x86/efi: Move efi_<reserve/free>_boot_services() to arch/x86
  x86/efi: Unmap EFI boot services code/data regions from efi_pgd
  x86/mm/pageattr: Introduce helper function to unmap EFI boot services
  efi/fdt: Simplify the get_fdt() flow
  efi/fdt: Indentation fix
  firmware/efi: Add NULL pointer checks in efivars API functions