For some reason coccinelle misses a few cases in header files with calls to
INTEL_GEN()/IS_GEN(). Do a manual conversion for those.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210605155356.4183026-6-lucas.demarchi@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20210606045050.103862-3-lucas.demarchi@intel.com

This was done by the following semantic patch:

	@@ expression i915; @@
	- INTEL_GEN(i915)
	+ GRAPHICS_VER(i915)

	@@ expression i915; expression E; @@
	- INTEL_GEN(i915) >= E
	+ GRAPHICS_VER(i915) >= E

	@@ expression dev_priv; expression E; @@
	- !IS_GEN(dev_priv, E)
	+ GRAPHICS_VER(dev_priv) != E

	@@ expression dev_priv; expression E; @@
	- IS_GEN(dev_priv, E)
	+ GRAPHICS_VER(dev_priv) == E

	@@
	expression dev_priv;
	expression from, until;
	@@
	- IS_GEN_RANGE(dev_priv, from, until)
	+ IS_GRAPHICS_VER(dev_priv, from, until)

	@def@
	expression E;
	identifier id =~ "^gen$";
	@@
	- id = GRAPHICS_VER(E)
	+ ver = GRAPHICS_VER(E)

	@@
	identifier def.id;
	@@
	- id
	+ ver

It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210606045050.103862-2-lucas.demarchi@intel.com

Since we are replacing IS_GEN() with GRAPHICS_VER(), make sure we take
care of the comments as well.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603165428.3625495-8-lucas.demarchi@intel.com

This was done by the following semantic patch:

	@@ expression i915; @@
	- INTEL_GEN(i915)
	+ GRAPHICS_VER(i915)

	@@ expression i915; expression E; @@
	- INTEL_GEN(i915) >= E
	+ GRAPHICS_VER(i915) >= E

	@@ expression dev_priv; expression E; @@
	- !IS_GEN(dev_priv, E)
	+ GRAPHICS_VER(dev_priv) != E

	@@ expression dev_priv; expression E; @@
	- IS_GEN(dev_priv, E)
	+ GRAPHICS_VER(dev_priv) == E

	@@
	expression dev_priv;
	expression from, until;
	@@
	- IS_GEN_RANGE(dev_priv, from, until)
	+ IS_GRAPHICS_VER(dev_priv, from, until)

	@def@
	expression E;
	identifier id =~ "^gen$";
	@@
	- id = GRAPHICS_VER(E)
	+ ver = GRAPHICS_VER(E)

	@@
	identifier def.id;
	@@
	- id
	+ ver

It also takes care of renaming the variable we assign to GRAPHICS_VER()
so to use "ver" rather than "gen".

Cc: intel-gvt-dev@lists.freedesktop.org
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603165428.3625495-5-lucas.demarchi@intel.com

Static analysis identified an issue in skl_crtc_allocate_ddb where
mbus_offset may be used uninitialized.
This patch fixes it.

Fixes: 835c176c

 ("drm/i915: Introduce MBUS relative dbuf offsets")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210603215338.13804-1-manasi.d.navare@intel.com

On ADL_P the power well->PHY mapping doesn't follow the mapping on previous
platforms, fix this up.

While at it remove the redundant dev_priv param from
icl_tc_phy_aux_ch().

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526143729.2563672-3-imre.deak@intel.com

It's possible that an already dequeued put_async_work() will release the
reference (*) that was put asynchronously after the dequeue happened.
This leaves an async-put work pending, without any reference to release.
A subsequent async-put may trigger the

drm_WARN_ON(!queue_delayed_work(&power_domains->async_put_work));

warn due to async_put_work() still pending. To avoid the warn, cancel
the pending async_put_work() when releasing the reference at (*) above.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3421
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2289
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526143729.2563672-2-imre.deak@intel.com

An async-put on an encoder specific power domain (for instance the AUX
PW domain) may be pending when removing the encoder. Make sure any such
async-puts are complete while the corresponding encoder is still in place
since at least AUX power wells require this to do a power well->PHY
lookup.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526143729.2563672-1-imre.deak@intel.com

Move struct intel_dmc from i915_drv.h to intel_dmc.h.

v2: Add includes along with moving the struct.

Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-4-anusha.srivatsa@intel.com

We check for dmc_payload being there at various points in the driver.
Replace it with the helper.

v2: rebased.
v3: Move intel_dmc to intel_dmc.h in another patch (Lucas)
v4: Remove headers not needed from intel_dmc.h

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-3-anusha.srivatsa@intel.com

Use new format of debug messages across intel_csr.

While at it, change some function definitions which now
need dev_priv for drm_err and drm_info etc.

v2: use container_of() (Jani)
v3: Indentation fixes. (Jani)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-2-anusha.srivatsa@intel.com

Implement Wa_22012358565 to avoid underrun with 32bpp cursor
in some high bandwidth scenarios. The implementation calls for
overriding the arbitration slots for the planes.

v2: Fix adlp_plane_ctl_arb_slots() return type

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526173600.27708-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

The FIFO underrun recovery mechanism has a boatload of cases
where it can't be used. The description is also a bit ambiguous
as it doesn't specify whether plane downscaling needs to be considered
or just pipe downscaling. We may not even have sufficient state
tracking to decide this on demand, so for now just disable the
whole thing.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526173600.27708-1-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

On ADL_P the TBT AUX power wells depend on the PW#2 power well, add the
corresponding power domain dependencies.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526203456.2733040-1-imre.deak@intel.com

The kernel prefers enabling fbc over the initial fb, since this leads to
actual runtime power savings, so if the initial fb is deemed too big
using some heuristic, then we simply skip allocating stolen for it.
However if the kernel is not configured with fbcon then it should be
possible to relax this, since unlike with fbcon the display server
shouldn't preserve it when later replacing it, and so we should be able
to re-use the stolen memory for fbc and friends. This patch is reported
to fix some flicker seen during boot splash on some devices.

v2: s/FRAMEBUFFER_CONSOLE/CONFIG_FRAMEBUFFER_CONSOLE

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526124901.245689-1-matthew.auld@intel.com

intel_hdmi_bpc_possible() will check has_hdmi_sink for us, so no
need to check it in intel_hdmi_mode_clock_valid() anymore.

Cc: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210511160532.21446-7-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

Now that we have to tell intel_hdmi_mode_clock_valid() whether
we're asking about 4:4:4 or 4:2:0 output it can take care of
the dotclock->TMDS clock conversion.

Cc: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210511160532.21446-6-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

Currently HDMI .mode_valid() only checks whether the source can do
deep color. Let's check whether the sink can do it as well.

Cc: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210511160532.21446-5-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

Let's put the platform checks into intel_hdmi_bpc_possible() so that
it'll confirm both the source and sink capabilities.

Cc: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210511160532.21446-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

We wish intel_hdmi_bpc_possible() to consider whether the sink
supports HDMI or just DVI when checking whether it'll support
HDMI deep color or not. This also takes care of the "force DVI"
property.

Cc: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210511160532.21446-3-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

Extract intel_hdmi_bpc_possible() from intel_hdmi_deep_color_possible()
so that we can reuse it for mode validation.

Cc: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210511160532.21446-2-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

It removes intel_crtc_state from function argument of
intel_psr_enable_source() in order to use intel_psr_enable_source()
without intel_crtc_state on other psr internal functions.
And we can get cpu_trancoder from intel_psr, therefore we don't need to
pass intel_crtc_state to this function.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526000656.3060314-4-matthew.d.roper@intel.com

On XE_LPD, VRR CTL register adds a new VRR Guardband bitfield
replacing the pipeline full and deprecating the pipeline override
bit.

This patch adds this corresponding bitfield in the register defs,
crtc state vrr structure and populates this in vrr compute
config and vrr enable functions. It also adds the corresponding
HW state readout for this field.

Bspec: 50508
Cc: Aditya Swarup <aditya.swarup@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Aditya Swarup <aditya.swarup@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526000656.3060314-3-matthew.d.roper@intel.com

XE_LPD brings enhanced underrun recovery:  the hardware can somewhat
mitigate underruns by using an interpolated replacement pixel (soft
underrun) or the previous pixel (hard underrun).  Furthermore, underruns
can now be caused downstream by the port, even if the pipe itself is
operating properly.  The interrupt register and PIPE_STATUS register
give us extra bits to recognize hard/soft underruns and determine
whether the underrun was caused by the port, so we'll use that
information to print some more descriptive errors when underruns occur.

v2:
 - Keep ICL's PIPE_STATUS defined separately from the old GMCH pipe
   status register.  (Ville)
 - Only read/clear the PIPE_STATUS register on platforms with
   display ver >= 11. (Lucas)
v3:
 - Actually enable+unmask all the new underrun interrupts, clear stale
   bits out from PIPE_STATUS before enabling the interrupts, report all
   FIFO underruns errors at once, rename a bunch of stuff to unconfuse
   vs. PIPESTAT. (Ville)

Bspec: 50335
Bspec: 50366
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526000656.3060314-2-matthew.d.roper@intel.com

Getting in sync with -rc2

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

On ADL-P, it's possible to enable the stream splitter on pipe B in
addition to pipe A.

Bspec: 50174
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526082903.26395-1-jani.nikula@intel.com

Function 'intel_dbuf_init' is declared twice, remove the
repeated declaration.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1621927793-44545-1-git-send-email-zhangshaokun@hisilicon.com

We are missing the implementation of some workarounds to enabled PSR2
in Alderlake P, so to avoid any CI report of issues around PSR2
disabling it until all PSR2 workarounds are implemented.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524214805.259692-5-jose.souza@intel.com

DC3CO is allowed in all the combinations between pipe and port A and B
on alderlake-P.

BSpec: 49196
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524214805.259692-4-jose.souza@intel.com

Commit c457d9cf

 ("drm/i915: Make sure we have enough memory
bandwidth on ICL") assumes that we always have a non-zero
dram_info->channels and uses it as a divisor.
We need num memory channels to be at least 1 for sane bw limits
checking, even when PCode returns 0 or there is a error reading it, so
lets force it to 1 in this case.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524214805.259692-3-jose.souza@intel.com

On ADL-P TC cold is exited and blocked when legacy aux is powered,
that is exacly the same of what ICL need for static TC ports.

TODO: When a TBT hub or monitor is connected it will cause TBT and
legacy aux to be powered at the same time, hopefully this will not
cause any issues but if it do, some rework will be needed.

v2:
 - skip icl_tc_port_assert_ref_held() warn on, adl-p uses aux to
   block TC cold

v3:
 - Drop icl_tc_port_assert_ref_held() earlier return for adl_p, not
   needed anymore
 - Set timeout_expected when enabling aux power well as port could be
   disconnected when tc_cold_block() is called

BSpec: 55480
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524214805.259692-2-jose.souza@intel.com

MODULAR_FIA_MASK is set in adl_p so we can drop this ealier return
and read registers.
Also to avoid warnings from icl_tc_port_assert_ref_held() when
calling tc_cold_block() in this functions it is necessary to held the
lock.

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524214805.259692-1-jose.souza@intel.com

Similarly to GGTT VMAs, DPT VMAs can be also a remapped or rotated view
of the mapped object, so make sure we debug print the details for these
views as well besides the normal view.

While at it also fix the debug print for the VMA type of DPT VMAs.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524172703.2113058-3-imre.deak@intel.com

An object mapped via DPT can have remapped and rotated VMA instances
besides the normal VMA instance, similarly to GGTT VMA instances.
Adjust the corresponding VMA lookup asserts.

While at it also check if a DPT VM is passed incorrectly to
i915_vm_to_ppgtt().

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524172703.2113058-2-imre.deak@intel.com

All DPT FB color plane surface base addresses must be 2MB aligned. On
ADL_P this means that the offsets in CCS FB object must be also 2MB
aligned. Adjusting unaligned offsets for these FBs during commit time
(compensating with the x/y offsets) doesn't work, since the big
alignment would most probably lead to an x/y offset mismatch error
between the main and CCS planes.

We can overcome this limitation by remapping CCS FBs, so that each color
plane is at an aligned offset, leaving x/y for each plane unadjusted
during commit and so not causing an x/y mismatch error. However
remapping for CCS FBs will be done as a follow-up, so for now require
that user space allocates the FB obj with properly aligned planes.

v2: s/SZ_2M/512*4k/ for clarity. (Ville)

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524172703.2113058-1-imre.deak@intel.com

Fix table returned when port_clock > 270000:

	drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c:752:47: error: variable 'adlp_dkl_phy_dp_ddi_trans_hbr2_hbr3' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]

Initial version of the patch had it in a single table, but on second
version the table got split, but we continued to reference just one of
them.

Fixes: ca962882

 ("drm/i915/adl_p: Define and use ADL-P specific DP translation tables")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210521005209.4058702-1-lucas.demarchi@intel.com

Propogate changes to macros name containing CSR_*
to DMC_* from display side.

Fixes: 0633cdcb

 ("drm/i915/dmc: Rename macro names containing csr")
Cc: intel-gvt-dev@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210521174047.3861-1-anusha.srivatsa@intel.com

The driver currently disables the LTTPR non-transparent link training
mode for sinks with a DPCD_REV<1.4, based on the following description
of the LTTPR DPCD register range in DP standard 2.0 (at the 0xF0000
register description):

""
LTTPR-related registers at DPCD Addresses F0000h through F02FFh are valid
only for DPCD r1.4 (or higher).
"""

The transparent link training mode should still work fine, however the
implementation for this in some retimer FWs seems to be broken, see the
References: link below.

After discussions with DP standard authors the above "DPCD r1.4" does
not refer to the DPCD revision (stored in the DPCD_REV reg at 0x00000),
rather to the "LTTPR field data structure revision" stored in the
0xF0000 reg. An update request has been filed at vesa.org (see
wg/Link/documentComment/3746) for the upcoming v2.1 specification to
clarify the above description along the following lines:

"""
LTTPR-related registers at DPCD Addresses F0000h through F02FFh are
valid only for LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV 1.4 (or
higher)
"""

Based on my tests Windows uses the non-transparent link training mode
for DPCD_REV==1.2 sinks as well (so presumably for all DPCD_REVs), and
forcing it to use transparent mode on ICL/TGL platforms leads to the
same LT failure as reported at the References: link.

Based on the above let's assume that the transparent link training mode
is not well tested/supported and align the code to the correct
interpretation of what the r1.4 version refers to.

Reported-and-tested-by: Casey Harkins <caseyharkins@gmail.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3415
Fixes: 264613b4

 ("drm/i915: Disable LTTPR support when the DPCD rev < 1.4")
Cc: <stable@vger.kernel.org> # v5.11+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512212809.1234701-1-imre.deak@intel.com

Merge tag 'amd-drm-next-5.14-2021-05-21' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.14-2021-05-21:

amdgpu:
- RAS fixes
- SR-IOV fixes
- More BO management cleanups
- Aldebaran fixes
- Display fixes
- Support for new GPU, Beige Goby
- Backlight fixes

amdkfd:
- RAS fixes
- DMA mapping fixes
- HMM SVM fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210521045743.4047-1-alexander.deucher@amd.com

Merge tag 'amd-drm-next-5.14-2021-05-19' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.14-2021-05-19:

amdgpu:
- Aldebaran updates
- More LTTPR display work
- Vangogh updates
- SDMA 5.x GCR fixes
- RAS fixes
- PCIe ASPM support
- Modifier fixes
- Enable TMZ on Renoir
- Buffer object code cleanup
- Display overlay fixes
- Initial support for multiple eDP panels
- Initial SR-IOV support for Aldebaran
- DP link training refactor
- Misc code cleanups and bug fixes
- SMU regression fixes for variable sized arrays
- MAINTAINERS fixes for amdgpu

amdkfd:
- Initial SR-IOV support for Aldebaran
- Topology fixes
- Initial HMM SVM support
- Misc code cleanups and bug fixes

radeon:
- Misc code cleanups and bug fixes
- SMU regression fixes for variable sized arrays
- Flickering fix for Oland with multiple 4K displays

UAPI:
- amdgpu: Drop AMDGPU_GEM_CREATE_SHADOW flag.
  This was always a kernel internal flag and userspace use of it has always been blocked.
  It's no longer needed so remove it.
- amdkgd: HMM SVM support
  Overview: https://patchwork.freedesktop.org/series/85562/
  Porposed userspace: https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/tree/fxkamd/hmm-wip

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210520031258.231896-1-alexander.deucher@amd.com