With fast swap storage, the platforms want to use swap more aggressively
and swap-in is crucial to application latency.

The rw_page() based synchronous devices like zram, pmem and btt are such
fast storage.  When I profile swapin performance with zram lz4
decompress test, S/W overhead is more than 70%.  Maybe, it would be
bigger in nvdimm.

This patch aims to reduce swap-in latency by skipping swapcache if the
swap device is synchronous device like rw_page based device.  It
enhances 45% my swapin test(5G sequential swapin, no readahead, from
2.41sec to 1.64sec).

Link: http://lkml.kernel.org/r/1505886205-9671-5-git-send-email-minchan@kernel.org


Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If rw-page based fast storage is used for swap devices, we need to
detect it to enhance swap IO operations.  This patch is preparation for
optimizing of swap-in operation with next patch.

Link: http://lkml.kernel.org/r/1505886205-9671-4-git-send-email-minchan@kernel.org


Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As discussed at

  https://lkml.kernel.org/r/<20170728165604.10455-1-ross.zwisler@linux.intel.com>

someday we will remove rw_page().  If so, we need something to detect
such super-fast storage on which synchronous IO operations like the
current rw_page are always a win.

Introduces BDI_CAP_SYNCHRONOUS_IO to indicate such devices.  With it, we
could use various optimization techniques.

Link: http://lkml.kernel.org/r/1505886205-9671-3-git-send-email-minchan@kernel.org


Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With fast swap storage, the platform wants to use swap more aggressively
and swap-in is crucial to application latency.

The rw_page() based synchronous devices like zram, pmem and btt are such
fast storage.  When I profile swapin performance with zram lz4
decompress test, S/W overhead is more than 70%.  Maybe, it would be
bigger in nvdimm.

This patchset reduces swap-in latency by skipping swapcache if the swap
device is a synchronous device like a rw_page() based device.

It enhances by 45% my swapin test (5G sequential swapin, no readahead)
from 2.41sec to 1.64sec.

This patch (of 4):

Commit 19b7ccf8 ("block: get rid of blk_integrity_revalidate()")
fixed a weird thing (i.e., reset BDI_CAP_STABLE_WRITES flag
unconditionally whenever revalidat_disk is called) so zram doesn't need
to reset the flag any more when revalidating the bdev.  Instead, set the
flag just once when the zram device is created.

It shouldn't change any behavior.

Link: http://lkml.kernel.org/r/1505886205-9671-2-git-send-email-minchan@kernel.org


Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Hugh Dickins <hughd@google.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

struct page.mapping can be NULL or points to one object of type
address_space, anon_vma or KSM private structure.

Link: http://lkml.kernel.org/r/1506485067-15954-1-git-send-email-changbin.du@intel.com


Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that we have a NUMA-aware version of kmalloc_array() we can use it
instead of kmalloc_node() without an overflow check in the size
calculation.

Link: http://lkml.kernel.org/r/20170927082038.3782-7-jthumshirn@suse.de


Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mike Marciniszyn <infinipath@intel.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that we have a NUMA-aware version of kmalloc_array() we can use it
instead of kmalloc_node() without an overflow check in the size
calculation.

Link: http://lkml.kernel.org/r/20170927082038.3782-6-jthumshirn@suse.de


Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mike Marciniszyn <infinipath@intel.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that we have a NUMA-aware version of kmalloc_array() we can use it
instead of kmalloc_node() without an overflow check in the size
calculation.

Link: http://lkml.kernel.org/r/20170927082038.3782-5-jthumshirn@suse.de


Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mike Marciniszyn <infinipath@intel.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that we have a NUMA-aware version of kmalloc_array() we can use it
instead of kmalloc_node() without an overflow check in the size
calculation.

Link: http://lkml.kernel.org/r/20170927082038.3782-4-jthumshirn@suse.de


Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Mike Marciniszyn <infinipath@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that we have a NUMA-aware version of kmalloc_array() we can use it
instead of kmalloc_node() without an overflow check in the size
calculation.

Link: http://lkml.kernel.org/r/20170927082038.3782-3-jthumshirn@suse.de


Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: Mike Marciniszyn <infinipath@intel.com>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "Add kmalloc_array_node() and kcalloc_node()".

Our current memeory allocation routines suffer form an API imbalance,
for one we have kmalloc_array() and kcalloc() which check for overflows
in size multiplication and we have kmalloc_node() and kzalloc_node()
which allow for memory allocation on a certain NUMA node but don't check
for eventual overflows.

This patch (of 6):

We have kmalloc_array() and kcalloc() wrappers on top of kmalloc() which
ensure us overflow free multiplication for the size of a memory
allocation but these implementations are not NUMA-aware.

Likewise we have kmalloc_node() which is a NUMA-aware version of
kmalloc() but the implementation is not aware of any possible overflows
in eventual size calculations.

Introduce a combination of the two above cases to have a NUMA-node aware
version of kmalloc_array() and kcalloc().

Link: http://lkml.kernel.org/r/20170927082038.3782-2-jthumshirn@suse.de


Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mike Marciniszyn <infinipath@intel.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When slub_debug=O is set.  It is possible to clear debug flags for an
"unmergeable" slab cache in kmem_cache_open().  It makes the "unmergeable"
cache became "mergeable" in sysfs_slab_add().

These caches will generate their "unique IDs" by create_unique_id(), but
it is possible to create identical unique IDs.  In my experiment,
sgpool-128, names_cache, biovec-256 generate the same ID ":Ft-0004096" and
the kernel reports "sysfs: cannot create duplicate filename
'/kernel/slab/:Ft-0004096'".

To repeat my experiment, set disable_higher_order_debug=1,
CONFIG_SLUB_DEBUG_ON=y in kernel-4.14.

Fix this issue by setting unmergeable=1 if slub_debug=O and the the
default slub_debug contains any no-merge flags.

call path:
kmem_cache_create()
  __kmem_cache_alias()	-> we set SLAB_NEVER_MERGE flags here
  create_cache()
    __kmem_cache_create()
      kmem_cache_open()	-> clear DEBUG_METADATA_FLAGS
      sysfs_slab_add()	-> the slab cache is mergeable now

  sysfs: cannot create duplicate filename '/kernel/slab/:Ft-0004096'
  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x60/0x7c
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W       4.14.0-rc7ajb-00131-gd4c2e9f-dirty #123
  Hardware name: linux,dummy-virt (DT)
  task: ffffffc07d4e0080 task.stack: ffffff8008008000
  PC is at sysfs_warn_dup+0x60/0x7c
  LR is at sysfs_warn_dup+0x60/0x7c
  pc :  lr :  pstate: 60000145
  Call trace:
   sysfs_warn_dup+0x60/0x7c
   sysfs_create_dir_ns+0x98/0xa0
   kobject_add_internal+0xa0/0x294
   kobject_init_and_add+0x90/0xb4
   sysfs_slab_add+0x90/0x200
   __kmem_cache_create+0x26c/0x438
   kmem_cache_create+0x164/0x1f4
   sg_pool_init+0x60/0x100
   do_one_initcall+0x38/0x12c
   kernel_init_freeable+0x138/0x1d4
   kernel_init+0x10/0xfc
   ret_from_fork+0x10/0x18

Link: http://lkml.kernel.org/r/1510365805-5155-1-git-send-email-miles.chen@mediatek.com


Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

struct kmem_cache::flags is "unsigned long" which is unnecessary on
64-bit as no flags are defined in the higher bits.

Switch the field to 32-bit and save some space on x86_64 until such
flags appear:

	add/remove: 0/0 grow/shrink: 0/107 up/down: 0/-657 (-657)
	function                                     old     new   delta
	sysfs_slab_add                               720     719      -1
				...
	check_object                                 699     676     -23

[akpm@linux-foundation.org: fix printk warning]
Link: http://lkml.kernel.org/r/20171021100635.GA8287@avx2


Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add sparse-checked slab_flags_t for struct kmem_cache::flags (SLAB_POISON,
etc).

SLAB is bloated temporarily by switching to "unsigned long", but only
temporarily.

Link: http://lkml.kernel.org/r/20171021100225.GA22428@avx2


Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLAB_RECLAIM_ACCOUNT is a permanent attribute of a slab cache.  Set
__GFP_RECLAIMABLE as part of its ->allocflags rather than check the
cachep flag on every page allocation.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1710171527560.140898@chino.kir.corp.google.com


Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Current flow guarantees a valid pointer when handling the __GFP_ZERO
case.  So remove the unnecessary NULL pointer check.

Link: http://lkml.kernel.org/r/1507203141-11959-1-git-send-email-miles.chen@mediatek.com


Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The kernel may panic when an oom happens without killable process
sometimes it is caused by huge unreclaimable slabs used by kernel.

Although kdump could help debug such problem, however, kdump is not
available on all architectures and it might be malfunction sometime.
And, since kernel already panic it is worthy capturing such information
in dmesg to aid touble shooting.

Print out unreclaimable slab info (used size and total size) which
actual memory usage is not zero (num_objs * size != 0) when
unreclaimable slabs amount is greater than total user memory (LRU
pages).

The output looks like:

  Unreclaimable slab info:
  Name                      Used          Total
  rpc_buffers               31KB         31KB
  rpc_tasks                  7KB          7KB
  ebitmap_node            1964KB       1964KB
  avtab_node              5024KB       5024KB
  xfs_buf                 1402KB       1402KB
  xfs_ili                  134KB        134KB
  xfs_efi_item             115KB        115KB
  xfs_efd_item             115KB        115KB
  xfs_buf_item             134KB        134KB
  xfs_log_item_desc        342KB        342KB
  xfs_trans               1412KB       1412KB
  xfs_ifork                212KB        212KB

[yang.s@alibaba-inc.com: v11]
  Link: http://lkml.kernel.org/r/1507656303-103845-4-git-send-email-yang.s@alibaba-inc.com
Link: http://lkml.kernel.org/r/1507152550-46205-4-git-send-email-yang.s@alibaba-inc.com


Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

According to discussion with Christoph
(https://marc.info/?l=linux-kernel&m=150695909709711&w=2), it sounds like
it is pointless to keep CONFIG_SLABINFO around.

This patch removes the CONFIG_SLABINFO config option, but /proc/slabinfo
is still available.

[yang.s@alibaba-inc.com: v11]
  Link: http://lkml.kernel.org/r/1507656303-103845-3-git-send-email-yang.s@alibaba-inc.com
Link: http://lkml.kernel.org/r/1507152550-46205-3-git-send-email-yang.s@alibaba-inc.com


Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "oom: capture unreclaimable slab info in oom message", v10.

Recently we ran into a oom issue, kernel panic due to no killable
process.  The dmesg shows huge unreclaimable slabs used almost 100%
memory, but kdump doesn't capture vmcore due to some reason.

So, it may sound better to capture unreclaimable slab info in oom
message when kernel panic to aid trouble shooting and cover the corner
case.  Since kernel already panic, so capturing more information sounds
worthy and doesn't bother normal oom killer.

With the patchset, tools/vm/slabinfo has a new option, "-U", to show
unreclaimable slab only.

And, oom will print all non zero (num_objs * size != 0) unreclaimable
slabs in oom killer message.

This patch (of 3):

Add "-U" option to show unreclaimable slabs only.

"-U" and "-S" together can tell us what unreclaimable slabs use the most
memory to help debug huge unreclaimable slabs issue.

Link: http://lkml.kernel.org/r/1507152550-46205-2-git-send-email-yang.s@alibaba-inc.com


Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Link: http://lkml.kernel.org/r/71604351584F6A4EBAE558C676F37CA4F3CDE3A9@H3CMLB14-EX.srv.huawei-3com.com


Signed-off-by: guozhonghua <guozhonghua@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When dlm_add_migration_mle returns -EEXIST, previously input mle will
not be initialized.  So we can't use its associated dlm object.  And we
truly don't need this mle for already launched migration progress, since
oldmle has taken this role.

Link: http://lkml.kernel.org/r/63ADC13FD55D6546B7DECE290D39E373CED7AA61@H3CMLB14-EX.srv.huawei-3com.com


Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The subsystem.su_mutex is required while accessing the item->ci_parent,
otherwise, NULL pointer dereference to the item->ci_parent will be
triggered in the following situation:

add node                     delete node
sys_write
 vfs_write
  configfs_write_file
   o2nm_node_store
    o2nm_node_local_write
                             do_rmdir
                              vfs_rmdir
                               configfs_rmdir
                                mutex_lock(&subsys->su_mutex);
                                unlink_obj
                                 item->ci_group = NULL;
                                 item->ci_parent = NULL;
	 to_o2nm_cluster_from_node
	  node->nd_item.ci_parent->ci_parent
	  BUG since of NULL pointer dereference to nd_item.ci_parent

Moreover, the o2nm_cluster also should be protected by the
subsystem.su_mutex.

[alex.chen@huawei.com: v2]
  Link: http://lkml.kernel.org/r/59EEAA69.9080703@huawei.com
Link: http://lkml.kernel.org/r/59E9B36A.10700@huawei.com


Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ip_alloc_sem should be taken in ocfs2_get_block() when reading file in
DIRECT mode to prevent concurrent access to extent tree with
ocfs2_dio_end_io_write(), which may cause BUGON in the following
situation:

read file 'A'                                  end_io of writing file 'A'
vfs_read
 __vfs_read
  ocfs2_file_read_iter
   generic_file_read_iter
    ocfs2_direct_IO
     __blockdev_direct_IO
      do_blockdev_direct_IO
       do_direct_IO
        get_more_blocks
         ocfs2_get_block
          ocfs2_extent_map_get_blocks
           ocfs2_get_clusters
            ocfs2_get_clusters_nocache()
             ocfs2_search_extent_list
              return the index of record which
              contains the v_cluster, that is
              v_cluster > rec[i]->e_cpos.
                                                ocfs2_dio_end_io
                                                 ocfs2_dio_end_io_write
                                                  down_write(&oi->ip_alloc_sem);
                                                  ocfs2_mark_extent_written
                                                   ocfs2_change_extent_flag
                                                    ocfs2_split_extent
                                                     ...
                                                 --> modify the rec[i]->e_cpos, resulting
                                                     in v_cluster < rec[i]->e_cpos.
             BUG_ON(v_cluster < le32_to_cpu(rec->e_cpos))

[alex.chen@huawei.com: v3]
  Link: http://lkml.kernel.org/r/59EF3614.6050008@huawei.com
Link: http://lkml.kernel.org/r/59EF3614.6050008@huawei.com
Fixes: c15471f7

 ("ocfs2: fix sparse file & data ordering issue in direct io")
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Reviewed-by: Gang He <ghe@suse.com>
Acked-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

we should wait dio requests to finish before inode lock in
ocfs2_setattr(), otherwise the following deadlock will happen:

process 1                  process 2                    process 3
truncate file 'A'          end_io of writing file 'A'   receiving the bast messages
ocfs2_setattr
 ocfs2_inode_lock_tracker
  ocfs2_inode_lock_full
 inode_dio_wait
  __inode_dio_wait
  -->waiting for all dio
  requests finish
                                                        dlm_proxy_ast_handler
                                                         dlm_do_local_bast
                                                          ocfs2_blocking_ast
                                                           ocfs2_generic_handle_bast
                                                            set OCFS2_LOCK_BLOCKED flag
                        dio_end_io
                         dio_bio_end_aio
                          dio_complete
                           ocfs2_dio_end_io
                            ocfs2_dio_end_io_write
                             ocfs2_inode_lock
                              __ocfs2_cluster_lock
                               ocfs2_wait_for_mask
                               -->waiting for OCFS2_LOCK_BLOCKED
                               flag to be cleared, that is waiting
                               for 'process 1' unlocking the inode lock
                           inode_dio_end
                           -->here dec the i_dio_count, but will never
                           be called, so a deadlock happened.

Link: http://lkml.kernel.org/r/59F81636.70508@huawei.com


Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Acked-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Link: http://lkml.kernel.org/r/59C5D7D6.9050106@huawei.com


Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Alex Chen <alex.chen@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When a node dies, other live nodes have to choose a new master for an
existed lock resource mastered by the dead node.

As for ocfs2/dlm implementation, this is done by function -
dlm_move_lockres_to_recovery_list which marks those lock rsources as
DLM_LOCK_RES_RECOVERING and manages them via a list from which DLM
changes lock resource's master later.

So without invoking dlm_move_lockres_to_recovery_list, no master will be
choosed after dlm recovery accomplishment since no lock resource can be
found through ::resource list.

What's worse is that if DLM_LOCK_RES_RECOVERING is not marked for lock
resources mastered a dead node, it will break up synchronization among
nodes.

So invoke dlm_move_lockres_to_recovery_list again.

Fixs: 'commit ee8f7fcb ("ocfs2/dlm: continue to purge recovery lockres when recovery master goes down")'
Link: http://lkml.kernel.org/r/63ADC13FD55D6546B7DECE290D39E373CED6E0F9@H3CMLB14-EX.srv.huawei-3com.com


Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
Reported-by: Vitaly Mayatskih <v.mayatskih@gmail.com>
Tested-by: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Link: http://lkml.kernel.org/r/59E064BB.8000005@huawei.com


Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

destroy_workqueue() will do flushing work for us.

Link: http://lkml.kernel.org/r/59E06476.3090502@huawei.com


Signed-off-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Link: http://lkml.kernel.org/r/71604351584F6A4EBAE558C676F37CA4D0743232@H3CMLB12-EX.srv.huawei-3com.com


Signed-off-by: guozhonghua <guozhonghua@h3c.com>
Acked-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The m32r Kconfig provides both CPU_BIG_ENDIAN and CPU_LITTLE_ENDIAN
configuration options.  As they are user-selectable and independent,
this allows invalid configurations:

  - All m32r defconfigs build a big endian kernel, but CPU_BIG_ENDIAN is
    not set, causing compiler warnings like:

	include/linux/byteorder/big_endian.h:7:2: warning: #warning inconsistent configuration, needs CONFIG_CPU_BIG_ENDIAN [-Wcpp]
	 #warning inconsistent configuration, needs CONFIG_CPU_BIG_ENDIAN
	  ^

  - Since commit 5bdfca64 ("m32r: define CPU_BIG_ENDIAN"),
    building an allmodconfig or allyesconfig enables both
    CONFIG_CPU_BIG_ENDIAN and CONFIG_CPU_LITTLE_ENDIAN.
    While this did get rid of the warning above, both options are
    obviously mutually exclusive.

Fix this by making only CPU_LITTLE_ENDIAN configurable by the user, as
before, and by making sure exactly one of CPU_BIG_ENDIAN and
CPU_LITTLE_ENDIAN is always enabled.

Link: http://lkml.kernel.org/r/1509361505-18150-1-git-send-email-geert@linux-m68k.org
Fixes: 5bdfca64

 ("m32r: define CPU_BIG_ENDIAN")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch provides 3 new arguments for bloat-o-meter
 1) -c -> for all (showing function and data differently)
 2) -d -> data
 3) -t -> function

output:

  ./scripts/bloat-o-meter  -c "file1" "file2"
  add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-152 (-152)
  Function                                     old     new   delta
  main                                         412     260    -152
  Total: Before=548, After=396, chg -27.74%
  ##########################################################
  add/remove: 1/0 grow/shrink: 1/0 up/down: 84/0 (84)
  Data                                         old     new   delta
  arr                                            -      64     +64
  backtrace                                     60      80     +20
  Total: Before=109, After=193, chg +77.06%
  ##########################################################
  add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-64 (-64)
  RO Data                                      old     new   delta
  arr                                           64       -     -64
  Total: Before=68, After=4, chg -94.12%

[maninder1.s@samsung.com: v1 -> v2]
  Link: http://lkml.kernel.org/r/1506569402-24787-1-git-send-email-maninder1.s@samsung.com
Link: http://lkml.kernel.org/r/1506336313-27187-1-git-send-email-maninder1.s@samsung.com


Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Cc: Amit Sahrawat <a.sahrawat@samsung.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: <pankaj.m@samsung.com>
Cc: <a.sahrawat@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull arm64 updates from Will Deacon:
 "The big highlight is support for the Scalable Vector Extension (SVE)
  which required extensive ABI work to ensure we don't break existing
  applications by blowing away their signal stack with the rather large
  new vector context (<= 2 kbit per vector register). There's further
  work to be done optimising things like exception return, but the ABI
  is solid now.

  Much of the line count comes from some new PMU drivers we have, but
  they're pretty self-contained and I suspect we'll have more of them in
  future.

  Plenty of acronym soup here:

   - initial support for the Scalable Vector Extension (SVE)

   - improved handling for SError interrupts (required to handle RAS
     events)

   - enable GCC support for 128-bit integer types

   - remove kernel text addresses from backtraces and register dumps

   - use of WFE to implement long delay()s

   - ACPI IORT updates from Lorenzo Pieralisi

   - perf PMU driver for the Statistical Profiling Extension (SPE)

   - perf PMU driver for Hisilicon's system PMUs

   - misc cleanups and non-critical fixes"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits)
  arm64: Make ARMV8_DEPRECATED depend on SYSCTL
  arm64: Implement __lshrti3 library function
  arm64: support __int128 on gcc 5+
  arm64/sve: Add documentation
  arm64/sve: Detect SVE and activate runtime support
  arm64/sve: KVM: Hide SVE from CPU features exposed to guests
  arm64/sve: KVM: Treat guest SVE use as undefined instruction execution
  arm64/sve: KVM: Prevent guests from using SVE
  arm64/sve: Add sysctl to set the default vector length for new processes
  arm64/sve: Add prctl controls for userspace vector length management
  arm64/sve: ptrace and ELF coredump support
  arm64/sve: Preserve SVE registers around EFI runtime service calls
  arm64/sve: Preserve SVE registers around kernel-mode NEON use
  arm64/sve: Probe SVE capabilities and usable vector lengths
  arm64: cpufeature: Move sys_caps_initialised declarations
  arm64/sve: Backend logic for setting the vector length
  arm64/sve: Signal handling support
  arm64/sve: Support vector length resetting for new processes
  arm64/sve: Core task context handling
  arm64/sve: Low-level CPU setup
  ...

Merge tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux



Pull RISC-V architecture support from Palmer Dabbelt:
 "This contains the core RISC-V Linux port, which has been through nine
  rounds of review on various mailing lists. The port is not complete:
  there's some cleanup patches moving through the review process, a
  whole bunch of drivers that need some work, and a lot of feature
  additions that will be needed.

  The patches contained in this tag have been through nine rounds of
  review on the various mailing lists. I have some outstanding cleanup
  patches, but since there's been so much review on these patches I
  thought it would be best to submit them as-is and then submit explicit
  cleanup patches so everyone can review them. This first patch set is
  big enough that it's a bit of a pain to constantly rewrite, and it's
  caused a few headaches with various contributors.

  The port is definately a work in progress. While what's there builds
  and boots with 4.14, it's a bit hard to actually see anything happen
  because there are no device drivers yet. I maintain a staging branch
  that contains all the device drivers and cleanup that actually works,
  but those patches won't all be ready for a while. I'd like to get what
  we currently have into your tree so everyone can start working from a
  single base -- of particular importance is allowing the glibc
  upstreaming process to proceed so we can sort out any possibly
  lingering user-visible ABI problems we might have.

  Copied below is the ChangeLog that contains the history of this patch
  set:

   (v9) As per suggestions on our v8 patch set, I've split the core
        architecture code out from our drivers and would like to submit
        this patch set to be included into linux-next, with the goal
        being to be merged in during the next merge window. This patch
        set is based on 4.14-rc2, but if it's better to have it based on
        something else then I can change it around.

        This patch set contains just the core arch code for RISC-V, so
        while it builds an nominally boots, you can't print or take an
        interrupt so it's not that useful. If you're looking to actually
        boot a system it would probably be better to use the full patch
        set listed below.

        We've collected a handful of tags from reviewers, and the
        remainder of the patch set only got minimal feedback last time.
        Here's what changed:

         - We now use the device tree to initialize the timer driver so
           it's less tighly coupled with the arch port.

         - I cleaned up the defconfigs -- there's actually now just one,
           and it's empty. For now I think we're OK with what the kernel
           sets as defaults, but I anticipate we'll begin to expand this
           as people start to use the port more.

         - The VDSO symbols version is sane.

         - We WFI while spinning in the boot loop.

         - A handful of comments have been added.

        While there are still a handful of FIXMEs in this patch set,
        we've started to get enough interest from various users and
        contributors that maintaining an out of tree patch set is
        starting to become a big burden. Hopefully the patches are good
        enough to merge now, which will at least get everyone working in
        a more reasonable manner as we clean up the remaining issues.

   (v8) I know it may not be the ideal time to submit a patch set right
        now, as it's the middle of the merge window, but things have
        calmed down quite a bit in the last month so I thought it would
        be good to get everyone on the same page. There's been a handful
        of changes since the last patch set, but most of them are fairly
        minor:

         - We changed PAGE_OFFSET to allowing mapping more physical
           memory on 64-bit systems. This is user configurable, as it
           triggers a different code model that generates slightly less
           efficient code.

         - The device tree binding documentation is back, I'd managed to
           lose it at some point.

         - We now pass the atomic64 test suite

         - The SBI timer driver has been refactored.

   (v7) It's been a while since my last patch set, but the changes han
        been fairly minimal:

         - The PCI cleanup patches have been dropped, we'll do them as a
           separate patch set later.

         - We've the Kconfig entries from CONFIG_ISA_* to
           CONFIG_RISCV_ISA_*, to make grep easier.

         - There have been a handful of memory model related tweaks in
           I/O land, particularly relating the PCI and the upcoming
           platform specification. There are significant comments in the
           relevant files. This is still a WIP, but I think we're close
           to getting as good as we're going to get until we end up with
           some more specifications.

   (v6) As it's been only a day since the v5 patch set, the changes are
        pretty minimal:

         - The patch set is now based on linux-next/master, which I
           believe is a better base now that we're getting closer to
           upstream.

         - EARLY_PRINTK is no longer an option. Since the SBI console is
           reasonable, there's no penalty to enabling it (and thus no
           benefit to disabling it).

         - The mmap syscalls were refactored a bit.

   (v5) Things have really started to calm down, so this is fairly
        similar to the v4 patch set. The most interesting changes
        include:

         - We've moved back to a single patch set.

         - SMP support has been fixed, I was accidentally running on a
           non-SMP configuration. There were various mistakes all over
           the tree as a result of this.

         - The cmpxchg syscalls have been removed, as they were deemed a
           bad idea. As a result, RISC-V Linux systems mandate the A
           extension. The corresponding Kconfig entry to enable builds
           on non-A systems has been removed.

         - A few more atomic fixes: mostly fence changes, but those
           resulted in a handful of additional macros that were no
           longer necessary.

         - riscv_early_sie has been removed.

   (v4) There have only been a few changes since the v3 patch set:

         - The cmpxchg64 syscall is no longer enabled on 32-bit systems.
           It's not possible to provide this on SMP systems, and it's
           not necessary as glibc knows not to call it.

         - We provide a ELF_HWCAP so users can determine the ISA of the
           machine the kernel is running on.

         - The multi-line comments are in a better form.

         - There were a handful of headers that could be replaced with
           the asm-generic versions, and a few unnecessary definitions.

         - We no longer use printk, but instead use pr_*.

         - A few Kconfig and defconfig entries have been cleaned up.

   (v3) A highlight of the changes since the v2 patch set includes:

         - We've split out all our drivers into separate patch sets,
           which I've already sent out to the relevant maintainers. I
           haven't included those patches in this patch set, but some of
           them are necessary to build our port.

         - The patch set is now split up differently: rather than being
           split per directory it is split per topic. Hopefully this
           will make it easier to review the port on the mailing list.
           The split is a bit rough, so you probably still want to look
           at the patch set as a whole.

         - atomic.h has been completely rewritten and is hopefully now
           correct. I've attempted to sanitize the various other memory
           model related code as well, and I think it should all be sane
           now aside from a handful of FIXMEs commented in the code.

         - We've changed the cmpexchg syscall to always exist and to not
           be multiplexed. There is also a VDSO entry for compare and
           exchange, which allows kernels with the A extension to
           execute user code without the A extension reasonably fast.

         - Our user-visible register state now contains enough space for
           the Q extension for 128-bit floating point, as well as a few
           words to allow extensibility to future ISA extensions like
           the eventual V extension for vectors.

         - A handful of driver cleanups, but these have been split into
           separate patch sets now so I won't duplicate them here.

   (v2) A highlight of the changes since the v1 patch set includes:

         - We've split out our drivers into the right places, which
           means now there's a lot more patches. I'll be submitting
           these patches to various subsystem maintainers and including
           them in any future RISC-V patch sets until they've been
           merged.

         - The SBI console driver has been completely rewritten to use
           the HVC helpers and is now significantly smaller.

         - We've begun to use weaker barriers as opposed to just the big
           "fence". There's still some work to do here, specifically:
            - We need fences in the relaxed MMIO functions.
            - The non-relaxed MMIO functions are missing R/W bits on their fences.
            - Many AMOs need the aq and rl bits set.

         - We now have thread_info in task_struct. As a result, sscratch
           now contains TP instead of SP. This was necessary because
           thread_info is no longer on the stack.

         - A few shared routines have been added that we use instead of
           creating another arch copy"

Reviewed-by: Arnd Bergmann <arnd@arndb.de>

* tag 'riscv-for-linus-4.15-arch-v9-premerge' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
  RISC-V: Build Infrastructure
  RISC-V: User-facing API
  RISC-V: Paging and MMU
  RISC-V: Device, timer, IRQs, and the SBI
  RISC-V: Task implementation
  RISC-V: ELF and module implementation
  RISC-V: Generic library routines and assembly
  RISC-V: Atomic and Locking Code
  RISC-V: Init and Halt Code
  dt-bindings: RISC-V CPU Bindings
  lib: Add shared copies of some GCC library routines
  MAINTAINERS: Add RISC-V

Pull livepatching updates from Jiri Kosina:

 - shadow variables support, allowing livepatches to associate new
   "shadow" fields to existing data structures, from Joe Lawrence

 - pre/post patch callbacks API, allowing livepatch writers to register
   callbacks to be called before and after patch application, from Joe
   Lawrence

* 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: __klp_disable_patch() should never be called for disabled patches
  livepatch: Correctly call klp_post_unpatch_callback() in error paths
  livepatch: add transition notices
  livepatch: move transition "complete" notice into klp_complete_transition()
  livepatch: add (un)patch callbacks
  livepatch: Small shadow variable documentation fixes
  livepatch: __klp_shadow_get_or_alloc() is local to shadow.c
  livepatch: introduce shadow variable API

Pull trivial tree updates from Jiri Kosina:
 "The usual rocket-science from trivial tree for 4.15"

* 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  MAINTAINERS: relinquish kconfig
  MAINTAINERS: Update my email address
  treewide: Fix typos in Kconfig
  kfifo: Fix comments
  init/Kconfig: Fix module signing document location
  misc: ibmasm: Return error on error path
  HID: logitech-hidpp: fix mistake in printk, "feeback" -> "feedback"
  MAINTAINERS: Correct path to uDraw PS3 driver
  tracing: Fix doc mistakes in trace sample
  tracing: Kconfig text fixes for CONFIG_HWLAT_TRACER
  MIPS: Alchemy: Remove reverted CONFIG_NETLINK_MMAP from db1xxx_defconfig
  mm/huge_memory.c: fixup grammar in comment
  lib/xz: Add fall-through comments to a switch statement

Pull HID updates from Jiri Kosina:

 - high resolution mode for Dell canvas support, from Benjamin Tissoires

 - pen handling fixes for the Wacom driver, from Jason Gerecke

 - i2c-hid: Apollo-Lake based laptops improvements, from Hans de Goede

 - Input/Core: eraser tool support, from Ping Cheng

 - new ALPS touchpad (T4, found currently on HP EliteBook 1000, Zbook
   Stduio and HP Elite book x360) supportm from Masaki Ota

 - other smaller assorted fixes

* 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (33 commits)
  HID: cp2112: fix broken gpio_direction_input callback
  HID: cp2112: fix interface specification URL
  HID: Wacom: switch Dell canvas into highres mode
  HID: wacom: generic: Send BTN_STYLUS3 when both barrel switches are set
  HID: sony: Fix SHANWAN pad rumbling on USB
  HID: i2c-hid: Add no-irq-after-reset quirk for 0911:5288 device
  HID: add backlight level quirk for Asus ROG laptops
  HID: cp2112: add HIDRAW dependency
  HID: Add ID 044f:b605 ThrustMaster, Inc. force feedback Racing Wheel
  HID: hid-logitech: remove redundant assignment to pointer value
  HID: wacom: generic: Recognize WACOM_HID_WD_PEN as a type of pen collection
  HID: rmi: Check that a device is a RMI device before calling RMI functions
  HID: add multi-input quirk for GamepadBlock
  HID: alps: add new U1 device ID
  HID: alps: add support for Alps T4 Touchpad device
  HID: alps: remove variables local to u1_init() from the device struct
  HID: alps: properly handle max_fingers and minimum on X and Y axis
  HID: alps: Separate U1 device code
  HID: alps: delete unnecessary struct u1_dev devInfo
  HID: usbhid: Convert timers to use timer_setup()
  ...

- High resolution mode for DEll canvas support, from Benjamin Tissoires
- A lot of improvements to pen handling in the Wacom driver, from Jason Gerecke

Signed-off-by: Jiri Kosina <jkosina@suse.cz>

- usbhid: conversion to timer_setup() and from_timer() from Kees Cook

Signed-off-by: Jiri Kosina <jkosina@suse.cz>

- cp2112: GPIO error handling and Kconfig fixes from Sébastien Szymanski
- i2c-hid: fixup / quirk for Apollo-Lake based laptops, from Hans de Goede
- Input/Core: add eraser tool support, from Ping Cheng
- small assorted code fixes

Signed-off-by: Jiri Kosina <jkosina@suse.cz>

- SHANWAN PS3 rumble fix from Bastien Nocera

Signed-off-by: Jiri Kosina <jkosina@suse.cz>