Support ADIS16475 and similar IMU devices. These devices are
a precision, miniature MEMS inertial measurement unit (IMU) that
includes a triaxial gyroscope and a triaxial accelerometer. Each
inertial sensor combines with signal conditioning that optimizes
dynamic performance.

The driver adds support for the following devices:
* adis16470, adis16475, adis16477, adis16465, adis16467, adis16500,
  adis16505, adis16507.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add burst_max_len to `adis_burst`. This is useful for devices which
support different burst modes with different sizes. The buffer to be
used in the spi transfer is allocated with this variable making sure
that has space for all burst modes. The spi transfer length should hold
the "real" burst length depending on the current burst mode configured
in the device.

Moreover, `extra_len` in `adis_burst` is made const and it should
contain the smallest extra length necessary for a burst transfer. In
`struct adis` was added a new `burst_extra_len` that should hold the
extra bytes needed depending on the device instance being used.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This patch adds a `regmap_update_bits()` like API to the ADIS library.
It provides locked and unlocked variant.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

There are some ADIS devices that can configure the data ready pin
polarity. Hence, we cannot hardcode our IRQ mask as IRQF_TRIGGER_RISING
since we might want to have it as IRQF_TRIGGER_FALLING.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This patch adds support for a managed device version of
adis_setup_buffer_and_trigger. It works exactly as the original
one but it calls all the devm_iio_* functions to setup an iio
buffer and trigger. Hence we do not need to care about cleaning those
and we do not need to support a remove() callback for every driver using
the adis library.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The iio_triggered_buffer_{predisable,postenable} functions attach/detach
poll functions.

In most cases the iio_triggered_buffer_postenable() should be called first
to attach the poll function, and then the driver can init the data to be
triggered.
In this case it's the other way around: the DMA code should be initialized
before the attaching the poll function and the reverse should be done when
un-initializing.

To make things easier when removing the iio_triggered_buffer_postenable() &
iio_triggered_buffer_predisable() functions from the IIO core API, the DMA
code has been moved into preenable() for init, and postdisable() for
uninit.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This change moves the logic to check if the current channel is the
touchscreen channel to a separate helper.
This reduces some code duplication, but the main intent is to re-use this
in the next patches.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This change will allow the at91-sama5d2_adc driver to use other triggers
than it's own.
In particular, tested with the sysfs trigger.
To be able to achieve this functionality, some changes were required:
1) Do not enable/disable channels when enabling/disabling the trigger.
This is because the trigger is enabled/disabled only for our trigger
(obviously). We need channels enabled/disabled regardless of what trigger is
being used.
2) Cope with DMA : DMA cannot be used when using another type of trigger.
Other triggers work through pollfunc, so we get polled anyway on every trigger.
Thus we have to obtain data at every trigger.
3) When to start conversion? The usual pollfunc (store time from subsystem)
would be in hard irq and this would be a good way, but current iio subsystem
recommends to have it in the threaded irq. Thus adding software start
code in this handler.
4) Buffer config: we need to setup buffer regardless of our own device's
trigger. We may get one attached later.
5) IRQ handling: we use our own device IRQ only if it's our own trigger
and we do not use DMA . If we use DMA, we use the DMA controller's IRQ.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

It can happen that on IRQ trigger, not all conversions are done if
we are enabling multiple channels.
The IRQ is triggered on first EOC (end of channel), but it can happen
that not all channels are done. This leads into erroneous reports to
userspace (zero values or previous values).
To solve this, in trigger handler, check if the mask of done channels
is the same as the mask of active scan channels.
If it's the same, proceed and push to buffers. Otherwise, use usleep
to sleep until the conversion is done or we timeout.
Normally, it should happen that in a short time fashion, all channels are
ready, since the first IRQ triggered.
If a hardware fault happens (for example the clock suddently dissappears),
the handler will not be completed, in which case we do not report anything to
userspace anymore.
Also, change from using the EOC interrupts to DRDY interrupt.
This helps with the fact that not 'n' interrupt statuses are enabled,
each being able to trigger an interrupt, and instead only data ready
interrupt can wake up the CPU. Like this, when data is ready, check in
handler which and how many channels are done. While the DRDY is raised,
other IRQs cannot occur. Once the channel data is being read, we ack the
IRQ and finish the conversion.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Enables probing via ACPI PRP0001 route and removes an example of
an approach we no longer want people to copy.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>

Enables probing via ACPI PRP0001 and removes an example that we don't
want people to cut and paste into new drivers.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>

Enables probing via ACPI PRP0001 but mostly about removing examples
that might be copied to new drivers.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>

Also drops ifdef protections for CONFIG_OF.

Enables probing via ACPI PRP0001 and removes an example that might be
cut and paste into new drivers.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>

Enables ACPI probing via PRP0001 and removes an example that might
be cut and paste to a new driver.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>

Enables probing via the ACPI PRP0001 route but more is mosty about
removing examples of this that might get copied into new drivers.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>

Whilst this enables ACPI binding or the device via PRP0001 the
primary aim is to remove potential for these two things to be
cut and paste into new drivers.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>

Enables ACPI DSDT to probe via PRP0001 and the compatible property. Also
removes the ifdef protections for CONFIG_OF.

Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Enables ACPI DSDT to probe via PRP0001 and the compatible property.

Signed-off-by: Nishant Malpani <nish.malpani25@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Atlas Scientific RTD-SM OEM sensor reads temperature using
resistance temperature detector technology.

Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Cc: devicetree@vger.kernel.org
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Replace the for loops of the vnt_update_top_rates function by the fls
function.

The purpose of the two for loops is to find the most significant bit set
in a range of bits. So, they can be replace by the fls function (find
last set) with a previous mask to define the range.

This way avoid the iteration over unnecessary for loops.

The header "linux/bits.h" can be remove as it is included in the header
"linux/bitops.h".

Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Link: https://lore.kernel.org/r/20200420155246.4925-1-oscar.carter@gmx.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace the for loop by a ternary operator whose condition is an AND
bitmask against the priv->basic_rates variable.

The purpose of the for loop was to check if any of bits from RATE_54M to
RATE_6M was set, but it's not necessary to check every individual bit.
The same result can be achieved using only one single mask which
comprises all the commented bits.

This way avoid the iteration over an unnecessary for loop.

Also change the return type to bool because it's the type that this
function returns.

Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Link: https://lore.kernel.org/r/20200418134553.6415-1-oscar.carter@gmx.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gasket_sysfs_register_store() invokes get_mapping(), which returns a
reference of the specified gasket_sysfs_mapping object to "mapping" with
increased refcnt.

When gasket_sysfs_register_store() returns, local variable "mapping"
becomes invalid, so the refcount should be decreased to keep refcount
balanced.

The reference counting issue happens in one exception handling path of
gasket_sysfs_register_store(). When gasket_dev is NULL, the function
forgets to decrease the refcnt increased by get_mapping(), causing a
refcnt leak.

Fix this issue by calling put_mapping() when gasket_dev is NULL.

Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Link: https://lore.kernel.org/r/1587618941-13718-1-git-send-email-xiyuyang19@fudan.edu.cn


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gasket_sysfs_put_attr() invokes get_mapping(), which returns a reference
of the specified gasket_sysfs_mapping object to "mapping" with increased
refcnt.

When gasket_sysfs_put_attr() returns, local variable "mapping" becomes
invalid, so the refcount should be decreased to keep refcount balanced.

The reference counting issue happens in one path of
gasket_sysfs_put_attr(). When mapping attribute is unknown, the function
forgets to decrease the refcnt increased by get_mapping(), causing a
refcnt leak.

Fix this issue by calling put_mapping() when put attribute fails due to
unknown attribute.

Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Link: https://lore.kernel.org/r/1587618895-13660-1-git-send-email-xiyuyang19@fudan.edu.cn


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following coccicheck warning:

drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c:223:14-36: WARNING: Use
correct pointer type argument for sizeof

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200420133416.3087-1-yanaijie@huawei.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace legacy/depreacted pci_dma_* functions to new dma_* functions.
Also replace PCI_DMA_* macro to DMA* macro.

Signed-off-by: realwakka <realwakka@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200420154009.21161-1-realwakka@gmail.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup indentation style in qlge_main.c.
Fix 2 warnings found by checkpatch.pl.

Signed-off-by: Mathieu Dolmen <mathieu.dolmen@gmail.com>
Link: https://lore.kernel.org/r/20200419125712.27506-1-mathieu.dolmen@gmail.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These functions are only used by rxtx so move them and their arrays
used with them abbreviating the function description.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/2a4fd665-2fe1-f1ad-1e9a-1b01f698ea79@gmail.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vnt_update_pre_ed_threshold needs to be updated more often so
call from vnt_config where it updated on any of config changes.

It must have maximum sensitivity when the device is off channel
or idle.

Remove all the other calls in scanning and bss.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/1b00c112-347c-b0bb-61ed-a874ee448ff8@gmail.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The firmware function are not that complicated so
move them into main_usb as static functions in callers
visibility

Firmware definitions moved to device.h and MODULE_FIRMWARE
move to below module_usb_driver.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/7b384871-826b-9365-e3ed-5717ecefd31c@gmail.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add size check of SSID information element in incoming 802.11
frames, to prevent memcpy() of IE in array bssid->Ssid.Ssid, with
size more than 32 bytes.

Signed-off-by: Denis Straghkov <d.straghkov@ispras.ru>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200421212525.24962-1-d.straghkov@ispras.ru


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8723bs/hal/sdio_halinit.c: In function HalRxAggr8723BSdio:
drivers/staging/rtl8723bs/hal/sdio_halinit.c:547:24: warning: variable pregistrypriv set but not used [-Wunused-but-set-variable]

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200421024145.43576-1-yuehaibing@huawei.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following gcc warning:

drivers/staging/rtl8723bs/hal/odm.c:10:18: warning: ‘dB_Invert_Table’
defined but not used [-Wunused-const-variable=]
 static const u16 dB_Invert_Table[8][12] = {
                  ^~~~~~~~~~~~~~~

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200417073439.41888-1-yanaijie@huawei.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following gcc warning:

drivers/staging/rtl8723bs/hal/hal_btcoex.c:45:26: warning: ‘ioStaString’
defined but not used [-Wunused-const-variable=]
 static const char *const ioStaString[] = {
                          ^~~~~~~~~~~
drivers/staging/rtl8723bs/hal/hal_btcoex.c:38:26: warning:
‘h2cStaString’ defined but not used [-Wunused-const-variable=]
 static const char *const h2cStaString[] = {
                          ^~~~~~~~~~~~
drivers/staging/rtl8723bs/hal/hal_btcoex.c:33:26: warning:
‘BtLinkRoleString’ defined but not used [-Wunused-const-variable=]
 static const char *const BtLinkRoleString[] = {
                          ^~~~~~~~~~~~~~~~
drivers/staging/rtl8723bs/hal/hal_btcoex.c:23:26: warning:
‘BtSpecString’ defined but not used [-Wunused-const-variable=]
 static const char *const BtSpecString[] = {
                          ^~~~~~~~~~~~
drivers/staging/rtl8723bs/hal/hal_btcoex.c:15:26: warning:
‘BtProfileString’ defined but not used [-Wunused-const-variable=]
 static const char *const BtProfileString[] = {
                          ^~~~~~~~~~~~~~~

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200417073310.40893-1-yanaijie@huawei.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The field join_complete_status is never read. Drop it.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-17-Jerome.Pouiller@silabs.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In former code, the field wvif->state was more or less redundant with
vif->type. With the lasts change it has become unused. It is now time to
drop it.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-16-Jerome.Pouiller@silabs.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In wfx_remove_interface(), the current code differentiate AP and Station
cases. However, it is not necessary. In all cases, the only important
thing is the call to hif_reset(). We can use the same code to support
all cases.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-15-Jerome.Pouiller@silabs.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The callers of wfx_do_unjoin() already take care of vif state.
Therefore, it is not necessary to take care of the status of the
interface.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-14-Jerome.Pouiller@silabs.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In former code (before the inclusion of the driver in mainline kernel),
hif_join() could run asynchronously. When a join request was in
progress, it was forbidden to launch hif_scan().

Now, hif_join() is always run synchronously. There is no more reasons to
keep a protection against this case.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-13-Jerome.Pouiller@silabs.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Keys sent to the firmware are never reset. So, it is not necessary to
re-upload them after hif_reset(). Thus, it is no more necessary to keep
a copy of the keys in struct wfx_dev.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200420160311.57323-12-Jerome.Pouiller@silabs.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>