[ Upstream commit 910e230d ]

Macro symbol_put() is defined as __symbol_put(__stringify(x))

    ksym_name = "jiffies"
    symbol_put(ksym_name)

will be resolved as

    __symbol_put("ksym_name")

which is clearly wrong. So symbol_put must be replaced with __symbol_put.

When we uninstall hw_breakpoint.ko (rmmod), a kernel bug occurs with the
following error:

[11381.854152] kernel BUG at kernel/module/main.c:779!
[11381.854159] invalid opcode: 0000 [#2] PREEMPT SMP PTI
[11381.854163] CPU: 8 PID: 59623 Comm: rmmod Tainted: G      D    OE      6.2.9-200.fc37.x86_64 #1
[11381.854167] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B360M-HDV, BIOS P3.20 10/23/2018
[11381.854169] RIP: 0010:__symbol_put+0xa2/0xb0
[11381.854175] Code: 00 e8 92 d2 f7 ff 65 8b 05 c3 2f e6 78 85 c0 74 1b 48 8b 44 24 30 65 48 2b 04 25 28 00 00 00 75 12 48 83 c4 38 c3 cc cc cc cc <0f> 0b 0f 1f 44 00 00 eb de e8 c0 df d8 00 90 90 90 90 90 90 90 90
[11381.854178] RSP: 0018:ffffad8ec6ae7dd0 EFLAGS: 00010246
[11381.854181] RAX: 0000000000000000 RBX: ffffffffc1fd1240 RCX: 000000000000000c
[11381.854184] RDX: 000000000000006b RSI: ffffffffc02bf7c7 RDI: ffffffffc1fd001c
[11381.854186] RBP: 000055a38b76e7c8 R08: ffffffff871ccfe0 R09: 0000000000000000
[11381.854188] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[11381.854190] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[11381.854192] FS:  00007fbf7c62c740(0000) GS:ffff8c5badc00000(0000) knlGS:0000000000000000
[11381.854195] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[11381.854197] CR2: 000055a38b7793f8 CR3: 0000000363e1e001 CR4: 00000000003726e0
[11381.854200] DR0: ffffffffb3407980 DR1: 0000000000000000 DR2: 0000000000000000
[11381.854202] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[11381.854204] Call Trace:
[11381.854207]  <TASK>
[11381.854212]  s_module_exit+0xc/0xff0 [symbol_getput]
[11381.854219]  __do_sys_delete_module.constprop.0+0x198/0x2f0
[11381.854225]  do_syscall_64+0x58/0x80
[11381.854231]  ? exit_to_user_mode_prepare+0x180/0x1f0
[11381.854237]  ? syscall_exit_to_user_mode+0x17/0x40
[11381.854241]  ? do_syscall_64+0x67/0x80
[11381.854245]  ? syscall_exit_to_user_mode+0x17/0x40
[11381.854248]  ? do_syscall_64+0x67/0x80
[11381.854252]  ? exc_page_fault+0x70/0x170
[11381.854256]  entry_SYSCALL_64_after_hwframe+0x72/0xdc

Signed-off-by: Rong Tao <rongtao@cestc.cn>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7dc3606f ]

There is no 'msg-size' property in ramoops, so assume intention was for
'pmsg-size':

  sm8250-sony-xperia-edo-pdx206.dtb: ramoops@ffc00000: Unevaluated properties are not allowed ('msg-size' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-7-krzysztof.kozlowski@linaro.org


Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4e6b942f ]

There is no 'msg-size' property in ramoops, so assume intention was for
'pmsg-size':

  sm8150-sony-xperia-kumano-griffin.dtb: ramoops@ffc00000: Unevaluated properties are not allowed ('msg-size' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-6-krzysztof.kozlowski@linaro.org


Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c42f5452 ]

There is no 'msg-size' property in ramoops, so assume intention was for
'pmsg-size':

  sm6125-sony-xperia-seine-pdx201.dtb: ramoops@ffc00000: Unevaluated properties are not allowed ('msg-size' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-3-krzysztof.kozlowski@linaro.org


Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 362fa8f6 ]

This bridge seems to need the HSE packet, otherwise the image is
shifted up and corrupted at the bottom. This makes the bridge
work with Samsung DSIM on i.MX8MM and i.MX8MP.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615201902.566182-3-marex@denx.de


Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fba360a0 ]

While technically some control frames like ACK are shorter and
end after Address 1, such frames shouldn't be forwarded through
wmediumd or similar userspace, so require the full 3-address
header to avoid accessing invalid memory if shorter frames are
passed in.

Reported-by:  <syzbot+b2645b5bf1512b81fa22@syzkaller.appspotmail.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a7ed3465 ]

When compiling with gcc 13 and CONFIG_FORTIFY_SOURCE=y, the following
warning appears:

In function ‘fortify_memcpy_chk’,
    inlined from ‘size_entry_mwt’ at net/bridge/netfilter/ebtables.c:2118:2:
./include/linux/fortify-string.h:592:25: error: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Werror=attribute-warning]
  592 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The compiler is complaining:

memcpy(&offsets[1], &entry->watchers_offset,
                       sizeof(offsets) - sizeof(offsets[0]));

where memcpy reads beyong &entry->watchers_offset to copy
{watchers,target,next}_offset altogether into offsets[]. Silence the
warning by wrapping these three up via struct_group().

Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 19e4a47e ]

Before checking the action code, check that it even
exists in the frame.

Reported-by:  <syzbot+be9c824e6f269d608288@syzkaller.appspotmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3a198c95 ]

The following message shows up when compiling with W=1:

In function ‘fortify_memcpy_chk’,
    inlined from ‘alx_get_ethtool_stats’ at drivers/net/ethernet/atheros/alx/ethtool.c:297:2:
./include/linux/fortify-string.h:592:4: error: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Werror=attribute-warning]
  592 |    __read_overflow2_field(q_size_field, size);
      |    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In order to get alx stats altogether, alx_get_ethtool_stats() reads
beyond hw->stats.rx_ok. Fix this warning by directly copying hw->stats,
and refactor the unnecessarily complicated BUILD_BUG_ON btw.

Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821013218.1614265-1-gongruiqi@huaweicloud.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5ae4b0d8 ]

Errata ERR010450 only shows up if voltage is 1.8V, but if the device is
supplied by 3v3 the errata can be ignored. So let's check for if quirk
SDHCI_QUIRK2_NO_1_8_V is defined or not before limiting the frequency.

Cc: Jim Reinhart <jimr@tekvox.com>
Cc: James Autry <jautry@tekvox.com>
Cc: Matthew Maron <matthewm@tekvox.com>
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Acked-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230811214853.8623-1-giulio.benetti@benettiengineering.com


Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 280db21e ]

Similar to the transmission of TPM responses, also the transmission of TPM
commands may become corrupted. Instead of aborting when detecting such
issues, try resending the command again.

Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9e47a758 ]

During NVMeTCP Authentication a controller can trigger a kernel
oops by specifying the 8192 bit Diffie Hellman group and passing
a correctly sized, but zeroed Diffie Hellamn value.
mpi_cmp_ui() was detecting this if the second parameter was 0,
but 1 is passed from dh_is_pubkey_valid(). This causes the null
pointer u->d to be dereferenced towards the end of mpi_cmp_ui()

Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1ad8237e ]

When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y,
I've noticed the following:

In function ‘fortify_memcpy_chk’,
    inlined from ‘wil_rx_crypto_check_edma’ at drivers/net/wireless/ath/wil6210/txrx_edma.c:566:2:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
  529 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

where the compiler complains on:

const u8 *pn;
...
pn = (u8 *)&st->ext.pn_15_0;
...
memcpy(cc->pn, pn, IEEE80211_GCMP_PN_LEN);

and:

In function ‘fortify_memcpy_chk’,
    inlined from ‘wil_rx_crypto_check’ at drivers/net/wireless/ath/wil6210/txrx.c:684:2:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
  529 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

where the compiler complains on:

const u8 *pn = (u8 *)&d->mac.pn_15_0;
...
memcpy(cc->pn, pn, IEEE80211_GCMP_PN_LEN);

In both cases, the fortification logic interprets 'memcpy()' as 6-byte
overread of 2-byte field 'pn_15_0' of 'struct wil_rx_status_extension'
and 'pn_15_0' of 'struct vring_rx_mac', respectively. To silence
these warnings, last two fields of the aforementioned structures
are grouped using 'struct_group_attr(pn, __packed' quirk.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230621093711.80118-1-dmantipov@yandex.ru


Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit dcce94b8 ]

When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y,
I've noticed the following:

In function ‘fortify_memcpy_chk’,
    inlined from ‘mwifiex_construct_tdls_action_frame’ at drivers/net/wireless/marvell/mwifiex/tdls.c:765:3,
    inlined from ‘mwifiex_send_tdls_action_frame’ at drivers/net/wireless/marvell/mwifiex/tdls.c:856:6:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
  529 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The compiler actually complains on:

memmove(pos + ETH_ALEN, &mgmt->u.action.category,
	sizeof(mgmt->u.action.u.tdls_discover_resp));

and it happens because the fortification logic interprets this
as an attempt to overread 1-byte 'u.action.category' member of
'struct ieee80211_mgmt'. To silence this warning, it's enough
to pass an address of 'u.action' itself instead of an address
of its first member.

This also fixes an improper usage of 'sizeof()'. Since 'skb' is
extended with 'sizeof(mgmt->u.action.u.tdls_discover_resp) + 1'
bytes (where 1 is actually 'sizeof(mgmt->u.action.category)'),
I assume that the same number of bytes should be copied.

Suggested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230629085115.180499-2-dmantipov@yandex.ru


Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 061115fb ]

Smatch reports:

ath_pci_probe() warn: argument 4 to %lx specifier is cast from pointer
ath_ahb_probe() warn: argument 4 to %lx specifier is cast from pointer

Fix it by modifying %lx to %p in the printk format string.

Note that with this change, the pointer address will be printed as a
hashed value by default. This is appropriate because the kernel
should not leak kernel pointers to user space in an informational
message. If someone wants to see the real address for debugging
purposes, this can be achieved with the no_hash_pointers kernel option.

Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230723040403.296723-1-dzm91@hust.edu.cn


Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 810e41ce ]

When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y,
I've noticed the following:

In function ‘fortify_memcpy_chk’,
    inlined from ‘ath_tx_complete_aggr’ at drivers/net/wireless/ath/ath9k/xmit.c:556:4,
    inlined from ‘ath_tx_process_buffer’ at drivers/net/wireless/ath/ath9k/xmit.c:773:3:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
  529 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In function ‘fortify_memcpy_chk’,
    inlined from ‘ath_tx_count_frames’ at drivers/net/wireless/ath/ath9k/xmit.c:473:3,
    inlined from ‘ath_tx_complete_aggr’ at drivers/net/wireless/ath/ath9k/xmit.c:572:2,
    inlined from ‘ath_tx_process_buffer’ at drivers/net/wireless/ath/ath9k/xmit.c:773:3:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
  529 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In both cases, the compiler complains on:

memcpy(ba, &ts->ba_low, WME_BA_BMP_SIZE >> 3);

which is the legal way to copy both 'ba_low' and following 'ba_high'
members of 'struct ath_tx_status' at once (that is, issue one 8-byte
'memcpy()' for two 4-byte fields). Since the fortification logic seems
interprets this trick as an attempt to overread 4-byte 'ba_low', silence
relevant warnings by using the convenient 'struct_group()' quirk.

Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230620080855.396851-2-dmantipov@yandex.ru


Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit babb80b3 ]

strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().

Direct replacement is safe here since return value of -errno
is used to check for truncation instead of sizeof(dest).

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89



Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 633d76ad ]

The checks in question were introduced by:
commit 6b4db2e5 ("devlink: Fix use-after-free after a failed reload").
That fixed an issue of reload with mlxsw driver.

Back then, that was a valid fix, because there was a limitation
in place that prevented drivers from registering/unregistering params
when devlink instance was registered.

It was possible to do the fix differently by changing drivers to
register/unregister params in appropriate places making sure the ops
operate only on memory which is allocated and initialized. But that,
as a dependency, would require to remove the limitation mentioned above.

Eventually, this limitation was lifted by:
commit 1d18bb1a ("devlink: allow registering parameters after the instance")

Also, the alternative fix (which also fixed another issue) was done by:
commit 74cbc3c0 ("mlxsw: spectrum_acl_tcam: Move devlink param to TCAM code").

Therefore, the checks are no longer relevant. Each driver should make
sure to have the params registered only when the memory the ops
are working with is allocated and initialized.

So remove the checks.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 883cf0d4 ]

If a badly constructed firmware includes multiple `ACPI_TYPE_PACKAGE`
objects while evaluating the AMD LPS0 _DSM, there will be a memory
leak.  Explicitly guard against this.

Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d11a6987 ]

Arm platforms use is_default_overflow_handler() to determine if the
hw_breakpoint code should single-step over the breakpoint trigger or
let the custom handler deal with it.

Since bpf_overflow_handler() currently isn't recognized as a default
handler, attaching a BPF program to a PERF_TYPE_BREAKPOINT event causes
it to keep firing (the instruction triggering the data abort exception
is never skipped). For example:

  # bpftrace -e 'watchpoint:0x10000:4:w { print("hit") }' -c ./test
  Attaching 1 probe...
  hit
  hit
  [...]
  ^C

(./test performs a single 4-byte store to 0x10000)

This patch replaces the check with uses_default_overflow_handler(),
which accounts for the bpf_overflow_handler() case by also testing
if one of the perf_event_output functions gets invoked indirectly,
via orig_default_handler.

Signed-off-by: Tomislav Novak <tnovak@meta.com>
Tested-by: Samuel Gosselin <sgosselin@google.com> # arm64
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/linux-arm-kernel/20220923203644.2731604-1-tnovak@fb.com/
Link: https://lore.kernel.org/r/20230605191923.1219974-1-tnovak@meta.com


Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e89ecd83 ]

For i.MX8MP, we cannot ensure that cycle counter overflow occurs at least
4 times as often as other events. Due to byte counters will count for any
event configured, it will overflow more often. And if byte counters
overflow that related counters would stop since they share the
COUNTER_CNTL. We can speed up cycle counter overflow frequency by setting
counter parameter (CP) field of cycle counter. In this way, we can avoid
stop counting byte counters when interrupt didn't come and the byte
counters can be fetched or updated from each cycle counter overflow
interrupt.

Because we initialize CP filed to shorten counter0 overflow time, the cycle
counter will start couting from a fixed/base value each time. We need to
remove the base from the result too. Therefore, we could get precise result
from cycle counter.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20230811015438.1999307-1-xu.yang_2@nxp.com


Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0242737d ]

Some HiSilicon SMMU PMCG suffers the erratum 162001900 that the PMU
disable control sometimes fail to disable the counters. This will lead
to error or inaccurate data since before we enable the counters the
counter's still counting for the event used in last perf session.

This patch tries to fix this by hardening the global disable process.
Before disable the PMU, writing an invalid event type (0xffff) to
focibly stop the counters. Correspondingly restore each events on
pmu::pmu_enable().

Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20230814124012.58013-1-yangyicong@huawei.com


Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 96b709be ]

The Lenovo Ideapad Z470 predates Windows 8, so it defaults to using
acpi_video for backlight control. But this is not functional on this
model.

Add a DMI quirk to use the native backlight interface which works.

Link: https://bugzilla.suse.com/show_bug.cgi?id=1208724


Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 013608cd ]

Kernels built with CONFIG_KASAN=y quarantine newly freed memory in order
to better detect use-after-free errors.  However, this can exhaust memory
more quickly in allocator-heavy tests, which can result in spurious
scftorture failure.  This commit therefore forgives memory-allocation
failure in kernels built with CONFIG_KASAN=y, but continues counting
the errors for use in detailed test-result analyses.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e60c122a ]

The rcuscale.holdoff module parameter can be used to delay the start
of rcu_scale_writer() kthread.  However, the hung-task timeout will
trigger when the timeout specified by rcuscale.holdoff is greater than
hung_task_timeout_secs:

runqemu kvm nographic slirp qemuparams="-smp 4 -m 2048M"
bootparams="rcuscale.shutdown=0 rcuscale.holdoff=300"

[  247.071753] INFO: task rcu_scale_write:59 blocked for more than 122 seconds.
[  247.072529]       Not tainted 6.4.0-rc1-00134-gb9ed6de8d4ff #7
[  247.073400] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  247.074331] task:rcu_scale_write state:D stack:30144 pid:59    ppid:2      flags:0x00004000
[  247.075346] Call Trace:
[  247.075660]  <TASK>
[  247.075965]  __schedule+0x635/0x1280
[  247.076448]  ? __pfx___schedule+0x10/0x10
[  247.076967]  ? schedule_timeout+0x2dc/0x4d0
[  247.077471]  ? __pfx_lock_release+0x10/0x10
[  247.078018]  ? enqueue_timer+0xe2/0x220
[  247.078522]  schedule+0x84/0x120
[  247.078957]  schedule_timeout+0x2e1/0x4d0
[  247.079447]  ? __pfx_schedule_timeout+0x10/0x10
[  247.080032]  ? __pfx_rcu_scale_writer+0x10/0x10
[  247.080591]  ? __pfx_process_timeout+0x10/0x10
[  247.081163]  ? __pfx_sched_set_fifo_low+0x10/0x10
[  247.081760]  ? __pfx_rcu_scale_writer+0x10/0x10
[  247.082287]  rcu_scale_writer+0x6b1/0x7f0
[  247.082773]  ? mark_held_locks+0x29/0xa0
[  247.083252]  ? __pfx_rcu_scale_writer+0x10/0x10
[  247.083865]  ? __pfx_rcu_scale_writer+0x10/0x10
[  247.084412]  kthread+0x179/0x1c0
[  247.084759]  ? __pfx_kthread+0x10/0x10
[  247.085098]  ret_from_fork+0x2c/0x50
[  247.085433]  </TASK>

This commit therefore replaces schedule_timeout_uninterruptible() with
schedule_timeout_idle().

Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d243b344 ]

Under PREEMPT_RT, __put_task_struct() indirectly acquires sleeping
locks. Therefore, it can't be called from an non-preemptible context.

One practical example is splat inside inactive_task_timer(), which is
called in a interrupt context:

  CPU: 1 PID: 2848 Comm: life Kdump: loaded Tainted: G W ---------
   Hardware name: HP ProLiant DL388p Gen8, BIOS P70 07/15/2012
   Call Trace:
   dump_stack_lvl+0x57/0x7d
   mark_lock_irq.cold+0x33/0xba
   mark_lock+0x1e7/0x400
   mark_usage+0x11d/0x140
   __lock_acquire+0x30d/0x930
   lock_acquire.part.0+0x9c/0x210
   rt_spin_lock+0x27/0xe0
   refill_obj_stock+0x3d/0x3a0
   kmem_cache_free+0x357/0x560
   inactive_task_timer+0x1ad/0x340
   __run_hrtimer+0x8a/0x1a0
   __hrtimer_run_queues+0x91/0x130
   hrtimer_interrupt+0x10f/0x220
   __sysvec_apic_timer_interrupt+0x7b/0xd0
   sysvec_apic_timer_interrupt+0x4f/0xd0
   asm_sysvec_apic_timer_interrupt+0x12/0x20
   RIP: 0033:0x7fff196bf6f5

Instead of calling __put_task_struct() directly, we defer it using
call_rcu(). A more natural approach would use a workqueue, but since
in PREEMPT_RT, we can't allocate dynamic memory from atomic context,
the code would become more complex because we would need to put the
work_struct instance in the task_struct and initialize it when we
allocate a new task_struct.

The issue is reproducible with stress-ng:

  while true; do
      stress-ng --sched deadline --sched-period 1000000000 \
	      --sched-runtime 800000000 --sched-deadline \
	      1000000000 --mmapfork 23 -t 20
  done

Reported-by: Hu Chunyu <chuhu@redhat.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Valentin Schneider <vschneid@redhat.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230614122323.37957-2-wander@redhat.com


Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3a21ffdb ]

ACPICA commit 90310989a0790032f5a0140741ff09b545af4bc5

According to the ACPI specification 19.6.134, no argument is required to be passed for ASL Timer instruction. For taking care of no argument, AML_NO_OPERAND_RESOLVE flag is added to ASL Timer instruction opcode.

When ASL timer instruction interpreted by ACPI interpreter, getting error. After adding AML_NO_OPERAND_RESOLVE flag to ASL Timer instruction opcode, issue is not observed.

=============================================================
UBSAN: array-index-out-of-bounds in acpica/dswexec.c:401:12 index -1 is out of range for type 'union acpi_operand_object *[9]'
CPU: 37 PID: 1678 Comm: cat Not tainted
6.0.0-dev-th500-6.0.y-1+bcf8c46459e407-generic-64k
HW name: NVIDIA BIOS v1.1.1-d7acbfc-dirty 12/19/2022 Call trace:
 dump_backtrace+0xe0/0x130
 show_stack+0x20/0x60
 dump_stack_lvl+0x68/0x84
 dump_stack+0x18/0x34
 ubsan_epilogue+0x10/0x50
 __ubsan_handle_out_of_bounds+0x80/0x90
 acpi_ds_exec_end_op+0x1bc/0x6d8
 acpi_ps_parse_loop+0x57c/0x618
 acpi_ps_parse_aml+0x1e0/0x4b4
 acpi_ps_execute_method+0x24c/0x2b8
 acpi_ns_evaluate+0x3a8/0x4bc
 acpi_evaluate_object+0x15c/0x37c
 acpi_evaluate_integer+0x54/0x15c
 show_power+0x8c/0x12c [acpi_power_meter]

Link: https://github.com/acpica/acpica/commit/90310989


Signed-off-by: Abhishek Mainkar <abmainkar@nvidia.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 74f6f591 ]

As following backtrace, the struct file_lock request , in posix_lock_inode
is free before ftrace function using.
Replace the ftrace function ahead free flow could fix the use-after-free
issue.

[name:report&]===============================================
BUG:KASAN: use-after-free in trace_event_raw_event_filelock_lock+0x80/0x12c
[name:report&]Read at addr f6ffff8025622620 by task NativeThread/16753
[name:report_hw_tags&]Pointer tag: [f6], memory tag: [fe]
[name:report&]
BT:
Hardware name: MT6897 (DT)
Call trace:
 dump_backtrace+0xf8/0x148
 show_stack+0x18/0x24
 dump_stack_lvl+0x60/0x7c
 print_report+0x2c8/0xa08
 kasan_report+0xb0/0x120
 __do_kernel_fault+0xc8/0x248
 do_bad_area+0x30/0xdc
 do_tag_check_fault+0x1c/0x30
 do_mem_abort+0x58/0xbc
 el1_abort+0x3c/0x5c
 el1h_64_sync_handler+0x54/0x90
 el1h_64_sync+0x68/0x6c
 trace_event_raw_event_filelock_lock+0x80/0x12c
 posix_lo...

[ Upstream commit 7f72f505 ]

[BUG]
Syzbot reported several warning triggered inside
lookup_inline_extent_backref().

[CAUSE]
As usual, the reproducer doesn't reliably trigger locally here, but at
least we know the WARN_ON() is triggered when an inline backref can not
be found, and it can only be triggered when @insert is true. (I.e.
inserting a new inline backref, which means the backref should already
exist)

[ENHANCEMENT]
After the WARN_ON(), dump all the parameters and the extent tree
leaf to help debug.

Link: https://syzkaller.appspot.com/bug?extid=d6f9ff86c1d804ba2bc6


Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ccbe77f7 ]

Syzkaller reports a memory leak:

BUG: memory leak
unreferenced object 0xffff88810b279e00 (size 96):
  comm "syz-executor399", pid 3631, jiffies 4294964921 (age 23.870s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 08 9e 27 0b 81 88 ff ff  ..........'.....
    08 9e 27 0b 81 88 ff ff 00 00 00 00 00 00 00 00  ..'.............
  backtrace:
    [<ffffffff814cfc90>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1046
    [<ffffffff81bb75ca>] kmalloc include/linux/slab.h:576 [inline]
    [<ffffffff81bb75ca>] autofs_wait+0x3fa/0x9a0 fs/autofs/waitq.c:378
    [<ffffffff81bb88a7>] autofs_do_expire_multi+0xa7/0x3e0 fs/autofs/expire.c:593
    [<ffffffff81bb8c33>] autofs_expire_multi+0x53/0x80 fs/autofs/expire.c:619
    [<ffffffff81bb6972>] autofs_root_ioctl_unlocked+0x322/0x3b0 fs/autofs/root.c:897
    [<ffffffff81bb6a95>] autofs_root_ioctl+0x25/0x30 fs/autofs/root.c:910
    [<ffffffff8...

Link: https://lore.kernel.org/r/20230917191113.831992765@linuxfoundation.org


Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d0ac7a30 upstream.

Return -ENODEV on these error paths instead of returning success.

Fixes: af761f27 ("pcd: cleanup initialization")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211001122623.GA2283@kili


Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3d028d5d upstream.

[WHY]
Currently, when insert_plane is called with insert_above_mpcc
parameter that is equal to tree->opp_list, the function returns NULL.

[HOW]
Instead, the function should insert the plane at the top of the tree.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wesley Chalmers <wesley.chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4fe4a637 upstream.

We have originally guarded fiddling with CHECKFLAGS in our arch Makefile
by checking for the CONFIG_MIPS variable, not set for targets such as
`distclean', etc. that neither include `.config' nor use the compiler.

Starting from commit 805b2e1d ("kbuild: include Makefile.compiler
only when compiler is needed") we have had a generic `need-compiler'
variable explicitly telling us if the compiler will be used and thus its
capabilities need to be checked and expressed in the form of compilation
flags.  If this variable is not set, then `make' functions such as
`cc-option' are undefined, causing all kinds of weirdness to happen if
we expect specific results to be returned, most recently:

cc1: error: '-mloongson-mmi' must be used with '-mhard-float'

messages with configurations such as `fuloong2e_defconfig' and the
`modules_install' target, which does include `.config' and yet does not
use the compiler.

Replace the check for CONFIG_MIPS with one for `need-compiler' instead,
so as to prevent the compiler from being ever called for CHECKFLAGS when
not needed.

Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Closes: https://lore.kernel.org/r/85031c0c-d981-031e-8a50-bc4fad2ddcd8@collabora.com/


Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 805b2e1d ("kbuild: include Makefile.compiler only when compiler is needed")
Cc: stable@vger.kernel.org # v5.13+
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a22730b1 ]

syzkaller found a memory leak in kcm_sendmsg(), and commit c821a88b
("kcm: Fix memory leak in error path of kcm_sendmsg()") suppressed it by
updating kcm_tx_msg(head)->last_skb if partial data is copied so that the
following sendmsg() will resume from the skb.

However, we cannot know how many bytes were copied when we get the error.
Thus, we could mess up the MSG_MORE queue.

When kcm_sendmsg() fails for SOCK_DGRAM, we should purge the queue as we
do so for UDP by udp_flush_pending_frames().

Even without this change, when the error occurred, the following sendmsg()
resumed from a wrong skb and the queue was messed up.  However, we have
yet to get such a report, and only syzkaller stumbled on it.  So, this
can be changed safely.

Note this does not change SOCK_SEQPACKET behaviour.

Fixes: c821a88b ("kcm: Fix memory leak in error path of kcm_sendmsg()")
Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230912022753.33327-1-kuniyu@amazon.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3c44191d ]

The commit in fixes introduced flags to control the status of hardware
configuration while processing packets. At the same time another structure
is used to provide configuration of timestamper to user-space applications.
The way it was coded makes this structures go out of sync easily. The
repro is easy for 82599 chips:

[root@hostname ~]# hwstamp_ctl -i eth0 -r 12 -t 1
current settings:
tx_type 0
rx_filter 0
new settings:
tx_type 1
rx_filter 12

The eth0 device is properly configured to timestamp any PTPv2 events.

[root@hostname ~]# hwstamp_ctl -i eth0 -r 1 -t 1
current settings:
tx_type 1
rx_filter 12
SIOCSHWTSTAMP failed: Numerical result out of range
The requested time stamping mode is not supported by the hardware.

The error is properly returned because HW doesn't support all packets
timestamping. But the adapter->flags is cleared of timestamp flags
even though no HW configuration was done. From that point no RX timestamps
are received by user-space application. But configuration shows good
values:

[root@hostname ~]# hwstamp_ctl -i eth0
current settings:
tx_type 1
rx_filter 12

Fix the issue by applying new flags only when the HW was actually
configured.

Fixes: a9763f3c ("ixgbe: Update PTP to support X550EM_x devices")
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8cdd9f1a ]

ip6_sock_set_addr_preferences() second argument should be an integer.

SUNRPC attempts to set IPV6_PREFER_SRC_PUBLIC were
translated to IPV6_PREFER_SRC_TMP

Fixes: 18d5ad62 ("ipv6: add ip6_sock_set_addr_preferences")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230911154213.713941-1-edumazet@google.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit cfaa80c9 ]

I got the below warning when do fuzzing test:
BUG: KASAN: null-ptr-deref in scatterwalk_copychunks+0x320/0x470
Read of size 4 at addr 0000000000000008 by task kworker/u8:1/9

CPU: 0 PID: 9 Comm: kworker/u8:1 Tainted: G           OE
Hardware name: linux,dummy-virt (DT)
Workqueue: pencrypt_parallel padata_parallel_worker
Call trace:
 dump_backtrace+0x0/0x420
 show_stack+0x34/0x44
 dump_stack+0x1d0/0x248
 __kasan_report+0x138/0x140
 kasan_report+0x44/0x6c
 __asan_load4+0x94/0xd0
 scatterwalk_copychunks+0x320/0x470
 skcipher_next_slow+0x14c/0x290
 skcipher_walk_next+0x2fc/0x480
 skcipher_walk_first+0x9c/0x110
 skcipher_walk_aead_common+0x380/0x440
 skcipher_walk_aead_encrypt+0x54/0x70
 ccm_encrypt+0x13c/0x4d0
 crypto_aead_encrypt+0x7c/0xfc
 pcrypt_aead_enc+0x28/0x84
 padata_parallel_worker+0xd0/0x2dc
 process_one_work+0x49c/0xbdc
 worker_thread+0x124/0x880
 kthread+0x210/0x260
 ret_from_fork+0x10/0x18

This is because the value of rec_seq of tls_crypto_info configured by the
user program is too large, for example, 0xffffffffffffff. In addition, TLS
is asynchronously accelerated. When tls_do_encryption() returns
-EINPROGRESS and sk->sk_err is set to EBADMSG due to rec_seq overflow,
skmsg is released before the asynchronous encryption process ends. As a
result, the UAF problem occurs during the asynchronous processing of the
encryption module.

If the operation is asynchronous and the encryption module returns
EINPROGRESS, do not free the record information.

Fixes: 635d9398 ("net/tls: free record only on encryption error")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20230909081434.2324940-1-liujian56@huawei.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0f596945 ]

This fix involves 2 changes:
 - All event regs have a reset value of 0, which is not a valid
   event_number as per the event_list for most blocks and hence seen
   as an error. Add a "disable" event with event_number 0 for all blocks.

 - The enable bit for each counter need not be checked before
   reading the event info, and hence removed.

Fixes: 1a218d31 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/04d0213932d32681de1c716b54320ed894e52425.1693917738.git.shravankr@nvidia.com


Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 80ccd405 ]

Replace sprintf with sysfs_emit where possible.
Size check in mlxbf_pmc_event_list_show should account for "\0".

Fixes: 1a218d31 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/bef39ef32319a31b32f999065911f61b0d3b17c3.1693917738.git.shravankr@nvidia.com


Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>