- Sep 12, 2020
-
-
Wanpeng Li authored
svm->next_rip is reset in svm_vcpu_run() only after calling svm_exit_handlers_fastpath(), which will cause SVM's skip_emulated_instruction() to write a stale RIP. We can move svm_exit_handlers_fastpath towards the end of svm_vcpu_run(). To align VMX with SVM, keep svm_complete_interrupts() close as well. Suggested-by:
Sean Christopherson <sean.j.christopherson@intel.com> Cc: Paul K. <kronenpj@kronenpj.dyndns.org> Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> [Also move vmcb_mark_all_clean before any possible write to the VMCB. - Paolo]
-
Vitaly Kuznetsov authored
Even without in-kernel LAPIC we should allow writing '0' to MSR_KVM_ASYNC_PF_EN as we're not enabling the mechanism. In particular, QEMU with 'kernel-irqchip=off' fails to start a guest with qemu-system-x86_64: error: failed to set MSR 0x4b564d02 to 0x0 Fixes: 9d3c447c ("KVM: X86: Fix async pf caused null-ptr-deref") Reported-by:
Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200911093147.484565-1-vkuznets@redhat.com> [Actually commit the version proposed by Sean Christopherson. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Rientjes authored
There may be many encrypted regions that need to be unregistered when a SEV VM is destroyed. This can lead to soft lockups. For example, on a host running 4.15: watchdog: BUG: soft lockup - CPU#206 stuck for 11s! [t_virtual_machi:194348] CPU: 206 PID: 194348 Comm: t_virtual_machi RIP: 0010:free_unref_page_list+0x105/0x170 ... Call Trace: [<0>] release_pages+0x159/0x3d0 [<0>] sev_unpin_memory+0x2c/0x50 [kvm_amd] [<0>] __unregister_enc_region_locked+0x2f/0x70 [kvm_amd] [<0>] svm_vm_destroy+0xa9/0x200 [kvm_amd] [<0>] kvm_arch_destroy_vm+0x47/0x200 [<0>] kvm_put_kvm+0x1a8/0x2f0 [<0>] kvm_vm_release+0x25/0x30 [<0>] do_exit+0x335/0xc10 [<0>] do_group_exit+0x3f/0xa0 [<0>] get_signal+0x1bc/0x670 [<0>] do_signal+0x31/0x130 Although the CLFLUSH is no longer issued on every encrypted region to be unregistered, there are no other changes that can prevent soft lockups for very large SEV VMs in the latest kernel. Periodically schedule if necessary. This still holds kvm->lock across the resched, but since this only happens when the VM is destroyed this is assumed to be acceptable. Signed-off-by:
David Rientjes <rientjes@google.com> Message-Id: <alpine.DEB.2.23.453.2008251255240.2987727@chino.kir.corp.google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Huacai Chen authored
MIPS defines two kvm types: #define KVM_VM_MIPS_TE 0 #define KVM_VM_MIPS_VZ 1 In Documentation/virt/kvm/api.rst it is said that "You probably want to use 0 as machine type", which implies that type 0 be the "automatic" or "default" type. And, in user-space libvirt use the null-machine (with type 0) to detect the kvm capability, which returns "KVM not supported" on a VZ platform. I try to fix it in QEMU but it is ugly: https://lists.nongnu.org/archive/html/qemu-devel/2020-08/msg05629.html And Thomas Huth suggests me to change the definition of kvm type: https://lists.nongnu.org/archive/html/qemu-devel/2020-09/msg03281.html So I define like this: #define KVM_VM_MIPS_AUTO 0 #define KVM_VM_MIPS_VZ 1 #define KVM_VM_MIPS_TE 2 Since VZ and TE cannot co-exists, using type 0 on a TE platform will still return success (so old user-space tools have no problems on new kernels); the advantage is that using type 0 on a VZ platform will not return failure. So, the only problem is "new user-space tools use type 2 on old kernels", but if we treat this as a kernel bug, we can backport this patch to old stable kernels. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Message-Id: <1599734031-28746-1-git-send-email-chenhc@lemote.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Lai Jiangshan authored
When kvm_mmu_get_page() gets a page with unsynced children, the spt pagetable is unsynchronized with the guest pagetable. But the guest might not issue a "flush" operation on it when the pagetable entry is changed from zero or other cases. The hypervisor has the responsibility to synchronize the pagetables. KVM behaved as above for many years, But commit 8c8560b8 ("KVM: x86/mmu: Use KVM_REQ_TLB_FLUSH_CURRENT for MMU specific flushes") inadvertently included a line of code to change it without giving any reason in the changelog. It is clear that the commit's intention was to change KVM_REQ_TLB_FLUSH -> KVM_REQ_TLB_FLUSH_CURRENT, so we don't needlessly flush other contexts; however, one of the hunks changed a nearby KVM_REQ_MMU_SYNC instead. This patch changes it back. Link: https://lore.kernel.org/lkml/20200320212833.3507-26-sean.j.christopherson@intel.com/ Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Lai Jiangshan <laijs@linux.alibaba.com> Message-Id: <20200902135421.31158-1-jiangshanlai@gmail.com> fixes: 8c8560b8 ("KVM: x86/mmu: Use KVM_REQ_TLB_FLUSH_CURRENT for MMU specific flushes") Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Chenyi Qiang authored
A minor fix for the update of VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL field in exit_ctls_high. Fixes: 03a8871a ("KVM: nVMX: Expose load IA32_PERF_GLOBAL_CTRL VM-{Entry,Exit} control") Signed-off-by:
Chenyi Qiang <chenyi.qiang@intel.com> Reviewed-by:
Xiaoyao Li <xiaoyao.li@intel.com> Message-Id: <20200828085622.8365-5-chenyi.qiang@intel.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Rustam Kovhaev authored
when kmalloc() fails in kvm_io_bus_unregister_dev(), before removing the bus, we should iterate over all other devices linked to it and call kvm_iodevice_destructor() for them Fixes: 90db1043 ("KVM: kvm_io_bus_unregister_dev() should never fail") Cc: stable@vger.kernel.org Reported-and-tested-by:
<syzbot+f196caa45793d6374707@syzkaller.appspotmail.com> Link: https://syzkaller.appspot.com/bug?extid=f196caa45793d6374707 Signed-off-by:
Rustam Kovhaev <rkovhaev@gmail.com> Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200907185535.233114-1-rkovhaev@gmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Haiwei Li authored
check the allocation of per-cpu __pv_cpu_mask. Initialize ops only when successful. Signed-off-by:
Haiwei Li <lihaiwei@tencent.com> Message-Id: <d59f05df-e6d3-3d31-a036-cc25a2b2f33f@gmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Peter Shier authored
When L2 uses PAE, L0 intercepts of L2 writes to CR0/CR3/CR4 call load_pdptrs to read the possibly updated PDPTEs from the guest physical address referenced by CR3. It loads them into vcpu->arch.walk_mmu->pdptrs and sets VCPU_EXREG_PDPTR in vcpu->arch.regs_dirty. At the subsequent assumed reentry into L2, the mmu will call vmx_load_mmu_pgd which calls ept_load_pdptrs. ept_load_pdptrs sees VCPU_EXREG_PDPTR set in vcpu->arch.regs_dirty and loads VMCS02.GUEST_PDPTRn from vcpu->arch.walk_mmu->pdptrs[]. This all works if the L2 CRn write intercept always resumes L2. The resume path calls vmx_check_nested_events which checks for exceptions, MTF, and expired VMX preemption timers. If vmx_check_nested_events finds any of these conditions pending it will reflect the corresponding exit into L1. Live migration at this point would also cause a missed immediate reentry into L2. After L1 exits, vmx_vcpu_run calls vmx_register_cache_reset which clears VCPU_EXREG_PDPTR in vcpu->arch.regs_dirty. When L2 next resumes, ept_load_pdptrs finds VCPU_EXREG_PDPTR clear in vcpu->arch.regs_dirty and does not load VMCS02.GUEST_PDPTRn from vcpu->arch.walk_mmu->pdptrs[]. prepare_vmcs02 will then load VMCS02.GUEST_PDPTRn from vmcs12->pdptr0/1/2/3 which contain the stale values stored at last L2 exit. A repro of this bug showed L2 entering triple fault immediately due to the bad VMCS02.GUEST_PDPTRn values. When L2 is in PAE paging mode add a call to ept_load_pdptrs before leaving L2. This will update VMCS02.GUEST_PDPTRn if they are dirty in vcpu->arch.walk_mmu->pdptrs[]. Tested: kvm-unit-tests with new directed test: vmx_mtf_pdpte_test. Verified that test fails without the fix. Also ran Google internal VMM with an Ubuntu 16.04 4.4.0-83 guest running a custom hypervisor with a 32-bit Windows XP L2 guest using PAE. Prior to fix would repro readily. Ran 14 simultaneous L2s for 140 iterations with no failures. Signed-off-by:
Peter Shier <pshier@google.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Message-Id: <20200820230545.2411347-1-pshier@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for Linux 5.9, take #1 - Multiple stolen time fixes, with a new capability to match x86 - Fix for hugetlbfs mappings when PUD and PMD are the same level - Fix for hugetlbfs mappings when PTE mappings are enforced (dirty logging, for example) - Fix tracing output of 64bit values
-
- Sep 04, 2020
-
-
Alexandru Elisei authored
Commit 196f878a (" KVM: arm/arm64: Signal SIGBUS when stage2 discovers hwpoison memory") modifies user_mem_abort() to send a SIGBUS signal when the fault IPA maps to a hwpoisoned page. Commit 1559b758 ("KVM: arm/arm64: Re-check VMA on detecting a poisoned page") changed kvm_send_hwpoison_signal() to use the page shift instead of the VMA because at that point the code had already released the mmap lock, which means userspace could have modified the VMA. If userspace uses hugetlbfs for the VM memory, user_mem_abort() tries to map the guest fault IPA using block mappings in stage 2. That is not always possible, if, for example, userspace uses dirty page logging for the VM. Update the page shift appropriately in those cases when we downgrade the stage 2 entry from a block mapping to a page. Fixes: 1559b758 ("KVM: arm/arm64: Re-check VMA on detecting a poisoned page") Signed-off-by:
Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Gavin Shan <gshan@redhat.com> Link: https://lore.kernel.org/r/20200901133357.52640-2-alexandru.elisei@arm.com
-
Marc Zyngier authored
Owing to their ARMv7 origins, the trace events are truncating most address values to 32bits. That's not really helpful. Expand the printing of such values to their full glory. Signed-off-by:
Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
For the obscure cases where PMD and PUD are the same size (64kB pages with 42bit VA, for example, which results in only two levels of page tables), we can't map anything as a PUD, because there is... erm... no PUD to speak of. Everything is either a PMD or a PTE. So let's only try and map a PUD when its size is different from that of a PMD. Cc: stable@vger.kernel.org Fixes: b8e0ba7c ("KVM: arm64: Add support for creating PUD hugepages at stage 2") Reported-by:
Gavin Shan <gshan@redhat.com> Reported-by:
Eric Auger <eric.auger@redhat.com> Reviewed-by:
Alexandru Elisei <alexandru.elisei@arm.com> Reviewed-by:
Gavin Shan <gshan@redhat.com> Tested-by:
Gavin Shan <gshan@redhat.com> Tested-by:
Eric Auger <eric.auger@redhat.com> Tested-by:
Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by:
Marc Zyngier <maz@kernel.org>
-
- Aug 22, 2020
-
-
Will Deacon authored
When an MMU notifier call results in unmapping a range that spans multiple PGDs, we end up calling into cond_resched_lock() when crossing a PGD boundary, since this avoids running into RCU stalls during VM teardown. Unfortunately, if the VM is destroyed as a result of OOM, then blocking is not permitted and the call to the scheduler triggers the following BUG(): | BUG: sleeping function called from invalid context at arch/arm64/kvm/mmu.c:394 | in_atomic(): 1, irqs_disabled(): 0, non_block: 1, pid: 36, name: oom_reaper | INFO: lockdep is turned off. | CPU: 3 PID: 36 Comm: oom_reaper Not tainted 5.8.0 #1 | Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 | Call trace: | dump_backtrace+0x0/0x284 | show_stack+0x1c/0x28 | dump_stack+0xf0/0x1a4 | ___might_sleep+0x2bc/0x2cc | unmap_stage2_range+0x160/0x1ac | kvm_unmap_hva_range+0x1a0/0x1c8 | kvm_mmu_notifier_invalidate_range_start+0x8c/0xf8 | __mmu_notifier_invalidate_range_start+0x218/0x31c | mmu_notifier_invalidate_range_start_nonblock+0x78/0xb0 | __oom_reap_task_mm+0x128/0x268 | oom_reap_task+0xac/0x298 | oom_reaper+0x178/0x17c | kthread+0x1e4/0x1fc | ret_from_fork+0x10/0x30 Use the new 'flags' argument to kvm_unmap_hva_range() to ensure that we only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is set in the notifier flags. Cc: <stable@vger.kernel.org> Fixes: 8b3405e3 ("kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd") Cc: Marc Zyngier <maz@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: James Morse <james.morse@arm.com> Signed-off-by:
Will Deacon <will@kernel.org> Message-Id: <20200811102725.7121-3-will@kernel.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Will Deacon authored
The 'flags' field of 'struct mmu_notifier_range' is used to indicate whether invalidate_range_{start,end}() are permitted to block. In the case of kvm_mmu_notifier_invalidate_range_start(), this field is not forwarded on to the architecture-specific implementation of kvm_unmap_hva_range() and therefore the backend cannot sensibly decide whether or not to block. Add an extra 'flags' parameter to kvm_unmap_hva_range() so that architectures are aware as to whether or not they are permitted to block. Cc: <stable@vger.kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: James Morse <james.morse@arm.com> Signed-off-by:
Will Deacon <will@kernel.org> Message-Id: <20200811102725.7121-2-will@kernel.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- Aug 21, 2020
-
-
Andrew Jones authored
arm64 requires a vcpu fd (KVM_HAS_DEVICE_ATTR vcpu ioctl) to probe support for steal-time. However this is unnecessary, as only a KVM fd is required, and it complicates userspace (userspace may prefer delaying vcpu creation until after feature probing). Introduce a cap that can be checked instead. While x86 can already probe steal-time support with a kvm fd (KVM_GET_SUPPORTED_CPUID), we add the cap there too for consistency. Signed-off-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20200804170604.42662-7-drjones@redhat.com
-
Andrew Jones authored
In preparation for documenting a new capability let's fix up the formatting of the current ones. Signed-off-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/20200804170604.42662-6-drjones@redhat.com
-
Andrew Jones authored
When updating the stolen time we should always read the current stolen time from the user provided memory, not from a kernel cache. If we use a cache then we'll end up resetting stolen time to zero on the first update after migration. Signed-off-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200804170604.42662-5-drjones@redhat.com
-
Andrew Jones authored
We can use typeof() to avoid the need for the type input. Suggested-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200804170604.42662-4-drjones@redhat.com
-
Andrew Jones authored
We should only check current->sched_info.run_delay once when updating stolen time. Otherwise there's a chance there could be a change between checks that we miss (preemption disabling comes after vcpu request checks). Signed-off-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200804170604.42662-3-drjones@redhat.com
-
Andrew Jones authored
Don't confuse the guest by saying steal-time is supported when it hasn't been configured by userspace and won't work. Signed-off-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200804170604.42662-2-drjones@redhat.com
-
- Aug 18, 2020
-
-
Jim Mattson authored
See the SDM, volume 3, section 4.4.1: If PAE paging would be in use following an execution of MOV to CR0 or MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then the PDPTEs are loaded from the address in CR3. Fixes: b9baba86 ("KVM, pkeys: expose CPUID/CR4 to guest") Cc: Huaitong Han <huaitong.han@intel.com> Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Peter Shier <pshier@google.com> Reviewed-by:
Oliver Upton <oupton@google.com> Message-Id: <20200817181655.3716509-1-jmattson@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jim Mattson authored
See the SDM, volume 3, section 4.4.1: If PAE paging would be in use following an execution of MOV to CR0 or MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then the PDPTEs are loaded from the address in CR3. Fixes: 0be0226f ("KVM: MMU: fix SMAP virtualization") Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Peter Shier <pshier@google.com> Reviewed-by:
Oliver Upton <oupton@google.com> Message-Id: <20200817181655.3716509-2-jmattson@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
The PK bit of the error code is computed dynamically in permission_fault and therefore need not be passed to gva_to_gpa: only the access bits (fetch, user, write) need to be passed down. Not doing so causes a splat in the pku test: WARNING: CPU: 25 PID: 5465 at arch/x86/kvm/mmu.h:197 paging64_walk_addr_generic+0x594/0x750 [kvm] Hardware name: Intel Corporation WilsonCity/WilsonCity, BIOS WLYDCRB1.SYS.0014.D62.2001092233 01/09/2020 RIP: 0010:paging64_walk_addr_generic+0x594/0x750 [kvm] Code: <0f> 0b e9 db fe ff ff 44 8b 43 04 4c 89 6c 24 30 8b 13 41 39 d0 89 RSP: 0018:ff53778fc623fb60 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ff53778fc623fbf0 RCX: 0000000000000007 RDX: 0000000000000001 RSI: 0000000000000002 RDI: ff4501efba818000 RBP: 0000000000000020 R08: 0000000000000005 R09: 00000000004000e7 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000007 R13: ff4501efba818388 R14: 10000000004000e7 R15: 0000000000000000 FS: 00007f2dcf31a700(0000) GS:ff4501f1c8040000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000001dea475005 CR4: 0000000000763ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: paging64_gva_to_gpa+0x3f/0xb0 [kvm] kvm_fixup_and_inject_pf_error+0x48/0xa0 [kvm] handle_exception_nmi+0x4fc/0x5b0 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x911/0x1c10 [kvm] kvm_vcpu_ioctl+0x23e/0x5d0 [kvm] ksys_ioctl+0x92/0xb0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x3e/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ---[ end trace d17eb998aee991da ]--- Reported-by:
Sean Christopherson <sean.j.christopherson@intel.com> Fixes: 89786147 ("KVM: x86: Add helper functions for illegal GPA checking and page fault injection") Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Yang Weijiang authored
If debug_regs.c is built with newer binutils, the resulting binary is "optimized" by the assembler: asm volatile("ss_start: " "xor %%rax,%%rax\n\t" "cpuid\n\t" "movl $0x1a0,%%ecx\n\t" "rdmsr\n\t" : : : "rax", "ecx"); is translated to : 000000000040194e <ss_start>: 40194e: 31 c0 xor %eax,%eax <----- rax->eax? 401950: 0f a2 cpuid 401952: b9 a0 01 00 00 mov $0x1a0,%ecx 401957: 0f 32 rdmsr As you can see rax is replaced with eax in target binary code. This causes a difference is the length of xor instruction (2 Byte vs 3 Byte), and makes the hard-coded instruction length check fail: /* Instruction lengths starting at ss_start */ int ss_size[4] = { 3, /* xor */ <-------- 2 or 3? 2, /* cpuid */ 5, /* mov */ 2, /* rdmsr */ }; Encode the shorter version directly and, while at it, fix the "clobbers" of the asm. Cc: stable@vger.kernel.org Signed-off-by:
Yang Weijiang <weijiang.yang@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- Aug 17, 2020
-
-
Linus Torvalds authored
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A few differerent things in here. Seems like syzbot got some more io_uring bits wired up, and we got a handful of reports and the associated fixes are in here. General fixes too, and a lot of them marked for stable. Lastly, a bit of fallout from the async buffered reads, where we now more easily trigger short reads. Some applications don't really like that, so the io_read() code now handles short reads internally, and got a cleanup along the way so that it's now easier to read (and documented). We're now passing tests that failed before" * tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block: io_uring: short circuit -EAGAIN for blocking read attempt io_uring: sanitize double poll handling io_uring: internally retry short reads io_uring: retain iov_iter state over io_read/io_write calls task_work: only grab task signal lock when needed io_uring: enable lo...
-
Mike Rapoport authored
Commit 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") converted parisc to use generic version of pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for PMD. Restore the original version of pmd_alloc_one() for parisc, just use GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and memset. Fixes: 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") Reported-by:
Meelis Roos <mroos@linux.ee> Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Tested-by:
Meelis Roos <mroos@linux.ee> Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.ee Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Aug 16, 2020
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes on the block side of things: - Discard granularity fix (Coly) - rnbd cleanups (Guoqing) - md error handling fix (Dan) - md sysfs fix (Junxiao) - Fix flush request accounting, which caused an IO slowdown for some configurations (Ming) - Properly propagate loop flag for partition scanning (Lennart)" * tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block: block: fix double account of flush request's driver tag loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE rnbd: no need to set bi_end_io in rnbd_bio_map_kern rnbd: remove rnbd_dev_submit_io md-cluster: Fix potential error pointer dereference in resize_bitmaps() block: check queue's limits.discard_granularity in __blkdev_issue_discard() md: get sysfs entry after redundancy attr group create
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fix from Palmer Dabbelt: "I collected a single fix during the merge window: we managed to break the early trap setup on !MMU, this fixes it" * tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Setup exception vector for nommu platform
-
git://git.libc.org/linux-shLinus Torvalds authored
Pull arch/sh updates from Rich Felker: "Cleanup, SECCOMP_FILTER support, message printing fixes, and other changes to arch/sh" * tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits) sh: landisk: Add missing initialization of sh_io_port_base sh: bring syscall_set_return_value in line with other architectures sh: Add SECCOMP_FILTER sh: Rearrange blocks in entry-common.S sh: switch to copy_thread_tls() sh: use the generic dma coherent remap allocator sh: don't allow non-coherent DMA for NOMMU dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig sh: unexport register_trapped_io and match_trapped_io_handler sh: don't include <asm/io_trapped.h> in <asm/io.h> sh: move the ioremap implementation out of line sh: move ioremap_fixed details out of <asm/io.h> sh: remove __KERNEL__ ifdefs from non-UAPI headers sh: sort the selects for SUPERH alphabetically sh: remove -Werror from Makefiles sh: Replace HTTP links with HTTPS ones arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA* sh: stacktrace: Remove stacktrace_ops.stack() sh: machvec: Modernize printing of kernel messages sh: pci: Modernize printing of kernel messages ...
-
Jens Axboe authored
One case was missed in the short IO retry handling, and that's hitting -EAGAIN on a blocking attempt read (eg from io-wq context). This is a problem on sockets that are marked as non-blocking when created, they don't carry any REQ_F_NOWAIT information to help us terminate them instead of perpetually retrying. Fixes: 227c0c96 ("io_uring: internally retry short reads") Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
There's a bit of confusion on the matching pairs of poll vs double poll, depending on if the request is a pure poll (IORING_OP_POLL_ADD) or poll driven retry. Add io_poll_get_double() that returns the double poll waitqueue, if any, and io_poll_get_single() that returns the original poll waitqueue. With that, remove the argument to io_poll_remove_double(). Finally ensure that wait->private is cleared once the double poll handler has run, so that remove knows it's already been seen. Cc: stable@vger.kernel.org # v5.8 Reported-by:
<syzbot+7f617d4a9369028b8a2c@syzkaller.appspotmail.com> Fixes: 18bceab101ad ("io_uring: allow POLL_ADD with double poll_wait() users") Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds authored
Pull more perf tools updates from Arnaldo Carvalho de Melo: "Fixes: - Fixes for 'perf bench numa'. - Always memset source before memcpy in 'perf bench mem'. - Quote CC and CXX for their arguments to fix build in environments using those variables to pass more than just the compiler names. - Fix module symbol processing, addressing regression detected via "perf test". - Allow multiple probes in record+script_probe_vfs_getname.sh 'perf test' entry. Improvements: - Add script to autogenerate socket family name id->string table from copy of kernel header, used so far in 'perf trace'. - 'perf ftrace' improvements to provide similar options for this utility so that one can go from 'perf record', 'perf trace', etc to 'perf ftrace' just by changing the name of the subcommand. - Prefer new "sched:sched_waking" trace event when it exists in 'perf sched' post processing. - Update POWER9 metrics to utilize other metrics. - Fall back to querying debuginfod if debuginfo not found locally. Miscellaneous: - Sync various kvm headers with kernel sources" * tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits) perf ftrace: Make option description initials all capital letters perf build-ids: Fall back to debuginfod query if debuginfo not found perf bench numa: Remove dead code in parse_nodes_opt() perf stat: Update POWER9 metrics to utilize other metrics perf ftrace: Add change log perf: ftrace: Add set_tracing_options() to set all trace options perf ftrace: Add option --tid to filter by thread id perf ftrace: Add option -D/--delay to delay tracing perf: ftrace: Allow set graph depth by '--graph-opts' perf ftrace: Add support for trace option tracing_thresh perf ftrace: Add option 'verbose' to show more info for graph tracer perf ftrace: Add support for tracing option 'irq-info' perf ftrace: Add support for trace option funcgraph-irqs perf ftrace: Add support for trace option sleep-time perf ftrace: Add support for tracing option 'func_stack_trace' perf tools: Add general function to parse sublevel options perf ftrace: Add option '--inherit' to trace children processes perf ftrace: Show trace column header perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size perf ftrace: Factor out function write_tracing_file_int() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes and small updates all around the place: - Fix mitigation state sysfs output - Fix an FPU xstate/sxave code assumption bug triggered by Architectural LBR support - Fix Lightning Mountain SoC TSC frequency enumeration bug - Fix kexec debug output - Fix kexec memory range assumption bug - Fix a boundary condition in the crash kernel code - Optimize porgatory.ro generation a bit - Enable ACRN guests to use X2APIC mode - Reduce a __text_poke() IRQs-off critical section for the benefit of PREEMPT_RT" * tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternatives: Acquire pte lock with interrupts enabled x86/bugs/multihit: Fix mitigation reporting when VMX is not in use x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs x86/purgatory: Don't generate debug info for purgatory.ro x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC kexec_file: Correctly output debugging information for the PT_LOAD ELF header kexec: Improve & fix crash_exclude_mem_range() to handle overlapping ranges x86/crash: Correct the address boundary of function parameters x86/acrn: Remove redundant chars from ACRN signature x86/acrn: Allow ACRN guest to use X2APIC mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Two fixes: fix a new tracepoint's output value, and fix the formatting of show-state syslog printouts" * tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Fix the alignment of the show-state debug output sched: Fix use of count for nr_running tracepoint
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Misc fixes, an expansion of perf syscall access to CAP_PERFMON privileged tools, plus a RAPL HW-enablement for Intel SPR platforms" * tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/rapl: Add support for Intel SPR platform perf/x86/rapl: Support multiple RAPL unit quirks perf/x86/rapl: Fix missing psys sysfs attributes hw_breakpoint: Remove unused __register_perf_hw_breakpoint() declaration kprobes: Remove show_registers() function prototype perf/core: Take over CAP_SYS_PTRACE creds to CAP_PERFMON capability
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixlets from Ingo Molnar: "A documentation fix and a 'fallthrough' macro update" * tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Convert to use the preferred 'fallthrough' macro Documentation/locking/locktypes: Fix a typo
-
- Aug 15, 2020
-
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: - some code cleanup - a couple of static analysis fixes - setattr: try to pick a fid associated with the file rather than the dentry, which might sometimes matter * tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux: 9p: Remove unneeded cast from memory allocation 9p: remove unused code in 9p net/9p: Fix sparse endian warning in trans_fd.c 9p: Fix memory leak in v9fs_mount 9p: retrieve fid from file when file instance exist.
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three small cifs/smb3 fixes, one for stable fixing mkdir path with the 'idsfromsid' mount option" * tag '5.9-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: SMB3: Fix mkdir when idsfromsid configured on mount cifs: Convert to use the fallthrough macro cifs: Fix an error pointer dereference in cifs_mount()
-