- Apr 21, 2019
-
-
Christophe Leroy authored
This patch adds ASM macros for saving, restoring and checking the KUAP state, and modifies setup_32 to call them on exceptions from kernel. The macros are defined as empty by default for when CONFIG_PPC_KUAP is not selected and/or for platforms which don't handle (yet) KUAP. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Christophe Leroy authored
syscalls are from user only, so we can account time without checking whether returning to kernel or user as it will only be user. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
When KUAP is enabled we have logic to detect page faults that occur outside of a valid user access region and are blocked by the AMR. What we don't have at the moment is logic to detect a fault *within* a valid user access region, that has been incorrectly blocked by AMR. This is not meant to ever happen, but it can if we incorrectly save/restore the AMR, or if the AMR was overwritten for some other reason. Currently if that happens we assume it's just a regular fault that will be corrected by handling the fault normally, so we just return. But there is nothing the fault handling code can do to fix it, so the fault just happens again and we spin forever, leading to soft lockups. So add some logic to detect that case and WARN() if we ever see it. Arguably it should be a BUG(), but it's more polite to fail the access and let the kernel continue, rather than taking down the box. There should be no data integrity issue with failing the fault rather than BUG'ing, as we're just going to disallow an access that should have been allowed. To make the code a little easier to follow, unroll the condition at the end of bad_kernel_fault() and comment each case, before adding the call to bad_kuap_fault(). Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
Kernel Userspace Access Prevention utilises a feature of the Radix MMU which disallows read and write access to userspace addresses. By utilising this, the kernel is prevented from accessing user data from outside of trusted paths that perform proper safety checks, such as copy_{to/from}_user() and friends. Userspace access is disabled from early boot and is only enabled when performing an operation like copy_{to/from}_user(). The register that controls this (AMR) does not prevent userspace from accessing itself, so there is no need to save and restore when entering and exiting userspace. When entering the kernel from the kernel we save AMR and if it is not blocking user access (because eg. we faulted doing a user access) we reblock user access for the duration of the exception (ie. the page fault) and then restore the AMR when returning back to the kernel. This feature can be tested by using the lkdtm driver (CONFIG_LKDTM=y) and performing the following: # (echo ACCESS_USERSPACE) > [debugfs]/provoke-crash/DIRECT If enabled, this should send SIGSEGV to the thread. We also add paranoid checking of AMR in switch and syscall return under CONFIG_PPC_KUAP_DEBUG. Co-authored-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Russell Currey authored
__patch_instruction() is called in early boot, and uses __put_user_size(), which includes the allow/prevent calls to enforce KUAP, which could either be called too early, or in the Radix case, forced to use "early_" versions of functions just to safely handle this one case. __put_user_asm() does not do this, and thus is safe to use both in early boot, and later on since in this case it should only ever be touching kernel memory. __patch_instruction() was previously refactored to use __put_user_size() in order to be able to return -EFAULT, which would allow the kernel to patch instructions in userspace, which should never happen. This has the functional change of causing faults on userspace addresses if KUAP is turned on, which should never happen in practice. A future enhancement could be to double check the patch address is definitely allowed to be tampered with by the kernel. Signed-off-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Russell Currey authored
Execution protection already exists on radix, this just refactors the radix init to provide the KUEP setup function instead. Thus, the only functional change is that it can now be disabled. Signed-off-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Russell Currey authored
Some platforms (i.e. Radix MMU) need per-CPU initialisation for KUP. Any platforms that only want to do KUP initialisation once globally can just check to see if they're running on the boot CPU, or check if whatever setup they need has already been performed. Note that this is only for 64-bit. Signed-off-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Christophe Leroy authored
This patch implements a framework for Kernel Userspace Access Protection. Then subarches will have the possibility to provide their own implementation by providing setup_kuap() and allow/prevent_user_access(). Some platforms will need to know the area accessed and whether it is accessed from read, write or both. Therefore source, destination and size and handed over to the two functions. mpe: Rename to allow/prevent rather than unlock/lock, and add read/write wrappers. Drop the 32-bit code for now until we have an implementation for it. Add kuap to pt_regs for 64-bit as well as 32-bit. Don't split strings, use pr_crit_ratelimited(). Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Christophe Leroy authored
This patch adds a skeleton for Kernel Userspace Execution Prevention. Then subarches implementing it have to define CONFIG_PPC_HAVE_KUEP and provide setup_kuep() function. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> [mpe: Don't split strings, use pr_crit_ratelimited()] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Christophe Leroy authored
This patch adds a skeleton for Kernel Userspace Protection functionnalities like Kernel Userspace Access Protection and Kernel Userspace Execution Prevention The subsequent implementation of KUAP for radix makes use of a MMU feature in order to patch out assembly when KUAP is disabled or unsupported. This won't work unless there's an entry point for KUP support before the feature magic happens, so for PPC64 setup_kup() is called early in setup. On PPC32, feature_fixup() is done too early to allow the same. Suggested-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
In order to implement KUAP (Kernel Userspace Access Protection) on Power9 we will be using the AMR, and therefore indirectly the UAMOR/AMOR. So save/restore these regs in the idle code. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Russell Currey authored
Without restoring the IAMR after idle, execution prevention on POWER9 with Radix MMU is overwritten and the kernel can freely execute userspace without faulting. This is necessary when returning from any stop state that modifies user state, as well as hypervisor state. To test how this fails without this patch, load the lkdtm driver and do the following: $ echo EXEC_USERSPACE > /sys/kernel/debug/provoke-crash/DIRECT which won't fault, then boot the kernel with powersave=off, where it will fault. Applying this patch will fix this. Fixes: 3b10d009 ("powerpc/mm/radix: Prevent kernel execution of user space") Cc: stable@vger.kernel.org # v4.10+ Signed-off-by:
Russell Currey <ruscur@russell.cc> Reviewed-by:
Akshay Adiga <akshay.adiga@linux.vnet.ibm.com> Reviewed-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
- Apr 20, 2019
-
-
Nathan Lynch authored
Changing the NUMA associations for CPUs and memory at runtime is basically unsupported by the core mm, scheduler etc. We see all manner of crashes, warnings and instability when the pseries code tries to do this. Disable this behavior by default, and document the switch a bit. Signed-off-by:
Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Nathan Lynch authored
When booted with "topology_updates=no", or when "off" is written to /proc/powerpc/topology_updates, NUMA reassignments are inhibited for PRRN and VPHN events. However, migration and suspend unconditionally re-enable reassignments via start_topology_update(). This is incoherent. Check the topology_updates_enabled flag in start/stop_topology_update() so that callers of those APIs need not be aware of whether reassignments are enabled. This allows the administrative decision on reassignments to remain in force across migrations and suspensions. Signed-off-by:
Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Andrew Donnellan authored
sparse complains a lot about opal-call.c: arch/powerpc/platforms/powernv/opal-call.c:128:1: warning: symbol 'opal_invalid_call' was not declared. Should it be static? arch/powerpc/platforms/powernv/opal-call.c:129:1: warning: symbol 'opal_console_write' was not declared. Should it be static? arch/powerpc/platforms/powernv/opal-call.c:130:1: warning: symbol 'opal_console_read' was not declared. Should it be static? Those symbols are forward declared in opal.h, but we can't include that because the function signatures in opal.h are different. So instead, just add an extra forward declaration to the OPAL_CALL macro to shut sparse up. Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
George Spelvin authored
This code was filling a 64K buffer from /dev/urandom in order to compute a CRC over (on average half of) it by two different methods, comparing the CRCs, and repeating. This is not a remotely security-critical application, so use the far faster and cheaper prandom_u32() generator. And, while we're at it, only fill as much of the buffer as we plan to use. Signed-off-by:
George Spelvin <lkml@sdf.org> Acked-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Jagadeesh Pagadala authored
Remove duplicate headers inclusions. Signed-off-by:
Jagadeesh Pagadala <jagdsh.linux@gmail.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Wen Yang authored
The call to of_find_compatible_node() returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. irq_domain_add_linear() also calls of_node_get() to increase refcount, so irq_domain() will not be affected when it is released. Detected by coccinelle. Fixes: a8db8cf0 ("irq_domain: Replace irq_alloc_host() with revmap-specific initializers") Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Suggested-by:
Christophe Leroy <christophe.leroy@c-s.fr> Suggested-by:
Michael Ellerman <mpe@ellerman.id.au> Reviewed-by:
Peng Hao <peng.hao2@zte.com.cn> Reviewed-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Ganesh Goudar authored
Add support to hwpoison the pages upon hitting machine check exception. This patch queues the address where UE is hit to percpu array and schedules work to plumb it into memory poison infrastructure. Reviewed-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
Ganesh Goudar <ganeshgr@linux.ibm.com> [mpe: Combine #ifdefs, drop PPC_BIT8(), and empty inline stub] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Julia Lawall authored
Add an of_node_put() when a tested device node is not available. Fixes: c026c987 ("powerpc/83xx: Do not configure or probe disabled FSL DR USB controllers") Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Lukas Bulwahn authored
Paul McKenney attempted to update all email addresses @linux.vnet.ibm.com to @linux.ibm.com in commit 1dfddcdb ("MAINTAINERS: Update from @linux.vnet.ibm.com to @linux.ibm.com"), but some still remained. We update the remaining email addresses in MAINTAINERS, hopefully finally catching all cases for good. Fixes: 1dfddcdb ("MAINTAINERS: Update from @linux.vnet.ibm.com to @linux.ibm.com") Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by:
Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Sukadev Bhattiprolu authored
The file arch/powerpc/include/uapi/asm/vas.h was considered but never merged and should be removed from the MAINTAINERS file. While here, add missing email address. Reported-by:
Joe Perches <joe@perches.com> Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Qian Cai authored
The commit 4c5d87db ("powerpc/pseries: PAPR persistent memory support") set a local variable "count" in dlpar_hp_pmem() but never use it. arch/powerpc/platforms/pseries/pmem.c: In function 'dlpar_hp_pmem': arch/powerpc/platforms/pseries/pmem.c:109:6: warning: variable 'count' set but not used Signed-off-by:
Qian Cai <cai@lca.pw> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Qian Cai authored
The commit b7d6bf4f ("powerpc/pseries/pci: Remove obsolete SW invalidate") left 2 variables unused. arch/powerpc/platforms/pseries/iommu.c:108:17: warning: variable 'tces' set but not used __be64 *tcep, *tces; ^~~~ arch/powerpc/platforms/pseries/iommu.c:132:17: warning: variable 'tces' set but not used __be64 *tcep, *tces; ^~~~ Also, the commit 68c0449e ("powerpc/pseries/iommu: Use memory@ nodes in max RAM address calculation") set "ranges" in ddw_memory_hotplug_max() but never use it. arch/powerpc/platforms/pseries/iommu.c: In function 'ddw_memory_hotplug_max': arch/powerpc/platforms/pseries/iommu.c:948:7: warning: variable 'ranges' set but not used int ranges, n_mem_addr_cells, n_mem_size_cells, len; ^~~~~~ Signed-off-by:
Qian Cai <cai@lca.pw> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Qian Cai authored
pte_unmap() compiles away on some powerpc platforms, so silence the warnings below by making it a static inline function. mm/memory.c: In function 'copy_pte_range': mm/memory.c:820:24: warning: variable 'orig_dst_pte' set but not used mm/memory.c:820:9: warning: variable 'orig_src_pte' set but not used mm/madvise.c: In function 'madvise_free_pte_range': mm/madvise.c:318:9: warning: variable 'orig_pte' set but not used mm/swap_state.c: In function 'swap_ra_info': mm/swap_state.c:634:15: warning: variable 'orig_pte' set but not used Suggested-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Qian Cai <cai@lca.pw> Reviewed-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Laurent Vivier authored
resize_hpt_for_hotplug() reports a warning when it cannot resize the hash page table ("Unable to resize hash page table to target order") but in some cases it's not a problem and can make user thinks something has not worked properly. This patch moves the warning to arch_remove_memory() to only report the problem when it is needed. Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Laurent Vivier <lvivier@redhat.com> Reviewed-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Add radix_enabled() check to avoid SLB preload with radix translation. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Thomas Huth authored
Recent versions of QEMU provide a XHCI device by default these days instead of an old-fashioned OHCI device: https://git.qemu.org/?p=qemu.git;a=commitdiff;h=57040d451315320b7d27 So to get the keyboard working in the graphical console there again, we should now include XHCI support in the kernel by default, too. Signed-off-by:
Thomas Huth <thuth@redhat.com> Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Acked-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Mahesh Salgaonkar authored
This is a follow up to the patch that fixed misleading print for TLB mutlihit due to wrongly populated mc_err_types[] array. Convert all the static array initialization to '[x] = val' style for better readability of array indexing and avoid any further confusion. Suggested-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Russell Currey authored
With STRICT_KERNEL_RWX enabled anything marked __init is placed at a 16M boundary. This is necessary so that it can be repurposed later with different permissions. However, in kernels with text larger than 16M, this pushes early_setup past 32M, incapable of being reached by the branch instruction. Fix this by setting the CTR and branching there instead. Fixes: 1e0fc9d1 ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs") Signed-off-by:
Russell Currey <ruscur@russell.cc> [mpe: Fix it to work on BE by using DOTSYM()] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Mathieu Malaterre authored
Silence the following warnings triggered using W=1: arch/powerpc/platforms/embedded6xx/holly.c:236:6: error: no previous prototype for 'holly_power_off' arch/powerpc/platforms/embedded6xx/holly.c:243:6: error: no previous prototype for 'holly_halt' Signed-off-by:
Mathieu Malaterre <malat@debian.org> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Mathieu Malaterre authored
In commit cb9e4d10 ("[POWERPC] Add support for 750CL Holly board") new functions were added. Since most of these functions can be made static, make it so. Both holly_power_off and holly_halt functions were not changed since they are unused, making them static would have triggered the following warning (treated as error): arch/powerpc/platforms/embedded6xx/holly.c:244:13: error: 'holly_halt' defined but not used Silence the following warnings triggered using W=1: arch/powerpc/platforms/embedded6xx/holly.c:47:5: error: no previous prototype for 'holly_exclude_device' arch/powerpc/platforms/embedded6xx/holly.c:190:6: error: no previous prototype for 'holly_show_cpuinfo' arch/powerpc/platforms/embedded6xx/holly.c:196:17: error: no previous prototype for 'holly_restart' Signed-off-by:
Mathieu Malaterre <malat@debian.org> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Ben Hutchings authored
The 32-bit vDSO is not needed and not normally built for 64-bit little-endian configurations. However, the vdso_install target still builds and installs it. Add the same config condition as is normally used for the build. Fixes: e0d00591 ("powerpc/vdso: Disable building the 32-bit VDSO ...") Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
Add comments describing the size in bytes of the various levels of the page table tree, and the size of the virtual address space mapped by each level, to make it clear what the sizes are without having to also look up other definitions. The code that calculates the sizes actually uses sizeof(pgd_t) etc., so in theory these comments could skew vs the code, but the size of pgd_t etc. is unlikely to change very often. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Christophe Leroy authored
In arch/powerpc/mm/highmem.c, BUG_ON() is called only when CONFIG_DEBUG_HIGHMEM is selected, this means the BUG_ON() is not vital and can be replaced by a a WARN_ON(). At the same time, use IS_ENABLED() instead of #ifdef to clean a bit. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
Our logic for choosing defconfig doesn't work well in some situations. For example if you're on a ppc64le machine but you specify a non-empty CROSS_COMPILE, in order to use a non-default toolchain, then defconfig will give you ppc64_defconfig (big endian): $ make CROSS_COMPILE=~/toolchains/gcc-8/bin/powerpc-linux- defconfig *** Default configuration is based on 'ppc64_defconfig' This is because we assume that CROSS_COMPILE being set means we can't be on a ppc machine and rather than checking we just default to ppc64_defconfig. We should just ignore CROSS_COMPILE, instead check the machine with uname and if it's one of ppc, ppc64 or ppc64le then use that defconfig. If it's none of those then we fall back to ppc64_defconfig. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
Add a generic 32-bit defconfig called ppc_defconfig. This means we'll have a defconfig matching "uname -m" for all cases. This config is mostly intended for build testing but if someone wants to tweak it to get it booting on something that would be fine too. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Tested-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
Merge our fixes branch. In particular the radix segment exception handling fix is necessary to avoid odd crashes.
-
- Apr 10, 2019
-
-
Michael Ellerman authored
The recent commit 8bc08689 ("powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations") removed our definition of MAX_PHYSMEM_BITS when SPARSEMEM is disabled. This inadvertently broke some 64-bit FLATMEM using configs with eg: arch/powerpc/include/asm/book3s/64/mmu-hash.h:584:6: error: "MAX_PHYSMEM_BITS" is not defined, evaluates to 0 #if (MAX_PHYSMEM_BITS > MAX_EA_BITS_PER_CONTEXT) ^~~~~~~~~~~~~~~~ Fix it by making sure we define MAX_PHYSMEM_BITS for all 64-bit configs regardless of SPARSEMEM. Fixes: 8bc08689 ("powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations") Reported-by:
Andreas Schwab <schwab@linux-m68k.org> Reported-by:
Hugh Dickins <hughd@google.com> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
- Apr 08, 2019
-
-
Nicholas Piggin authored
Commit 48e7b769 ("powerpc/64s/hash: Convert SLB miss handlers to C") broke the radix-mode segment exception handler. In radix mode, this is exception is not an SLB miss, rather it signals that the EA is outside the range translated by any page table. The commit lost the radix feature alternate code patch, which can cause faults to some EAs to kernel BUG at arch/powerpc/mm/slb.c:639! The original radix code would send faults to slb_miss_large_addr, which would end up faulting due to slb_addr_limit being 0. This patch sends radix directly to do_bad_slb_fault, which is a bit clearer. Fixes: 48e7b769 ("powerpc/64s/hash: Convert SLB miss handlers to C") Cc: stable@vger.kernel.org # v4.20+ Reported-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-