- Jan 16, 2024
-
-
David Thompson authored
[ Upstream commit dcea1bd4 ] Under heavy traffic, the BlueField Gigabit interface can become unresponsive. This is due to a possible race condition in the mlxbf_gige_rx_packet function, where the function exits with producer and consumer indices equal but there are remaining packet(s) to be processed. In order to prevent this situation, read receive consumer index *before* the HW replenish so that the mlxbf_gige_rx_packet function returns an accurate return value even if a packet is received into just-replenished buffer prior to exiting this routine. If the just-replenished buffer is received and occupies the last RX ring entry, the interface would not recover and instead would encounter RX packet drops related to internal buffer shortages since the driver RX logic is not being triggered to drain the RX ring. This patch will address and prevent this "ring full" condition. Fixes: f92e1869 ("Add Mellanox BlueField Gigabit Ethernet driver") Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: David Thompson <davthompson@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Chancel Liu authored
[ Upstream commit f9d378fc ] There is error message when defer probe happens: fsl_rpmsg rpmsg_audio: Unbalanced pm_runtime_enable! Fix the error handler with pm_runtime_enable. Fixes: b73d9e62 ("ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg") Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20231225080608.967953-1-chancel.liu@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kurt Kanzenbach authored
[ Upstream commit 7afd49a3 ] Currently the driver accepts VLAN EtherType steering rules regardless of the configured mask. And things might fail silently or with confusing error messages to the user. The VLAN EtherType can only be matched by full mask. Therefore, add a check for that. For instance the following rule is invalid, but the driver accepts it and ignores the user specified mask: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \ | m 0x00ff action 0 |Added rule with ID 63 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 63 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | VLAN EtherType: 0x8100 mask: 0x0 | VLAN: 0x0 mask: 0xffff | User-defined: 0x0 mask: 0xffffffffffffffff | Action: Direct to queue 0 After: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \ | m 0x00ff action 0 |rmgr: Cannot insert RX class rule: Operation not supported Fixes: 2b477d05 ("igc: Integrate flex filter into ethtool ops") Suggested-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kurt Kanzenbach authored
[ Upstream commit b5063cbe ] Currently the driver accepts VLAN TCI steering rules regardless of the configured mask. And things might fail silently or with confusing error messages to the user. There are two ways to handle the VLAN TCI mask: 1. Match on the PCP field using a VLAN prio filter 2. Match on complete TCI field using a flex filter Therefore, add checks and code for that. For instance the following rule is invalid and will be converted into a VLAN prio rule which is not correct: |root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \ | action 1 |Added rule with ID 61 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 61 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | VLAN EtherType: 0x0 mask: 0xffff | VLAN: 0x1 mask: 0x1fff | User-defined: 0x0 mask: 0xffffffffffffffff | Action: Direct to queue 1 After: |root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \ | action 1 |rmgr: Cannot insert RX class rule: Operation not supported Fixes: 7991487e ("igc: Allow for Flex Filters to be installed") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Kurt Kanzenbach authored
[ Upstream commit 088464ab ] Currently the driver allows to configure matching by VLAN EtherType. However, the retrieval function does not report it back to the user. Add it. Before: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0 |Added rule with ID 63 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 63 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | Action: Direct to queue 0 After: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0 |Added rule with ID 63 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 63 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | VLAN EtherType: 0x8100 mask: 0x0 | VLAN: 0x0 mask: 0xffff | User-defined: 0x0 mask: 0xffffffffffffffff | Action: Direct to queue 0 Fixes: 2b477d05 ("igc: Integrate flex filter into ethtool ops") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sudheer Mogilappagari authored
[ Upstream commit 3e48041d ] Prevent VF from configuring filters with unsupported actions or use REDIRECT action with invalid tc number. Current checks could cause out of bounds access on PF side. Fixes: e284fc28 ("i40e: Add and delete cloud filter") Reviewed-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Khaled Almahallawy authored
[ Upstream commit 2bd7a06a ] Using link_status to get DPCD_REV fails when disabling/defaulting phy pattern. Use intel_dp->dpcd to access DPCD_REV correctly. Fixes: 8cdf7271 ("drm/i915/dp: Program vswing, pre-emphasis, test-pattern") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Lee Shawn C <shawn.c.lee@intel.com> Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231213211542.3585105-3-khaled.almahallawy@intel.com (cherry picked from commit 3ee302ec) Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Suman Ghosh authored
[ Upstream commit 0ee2384a ] Couple of structures was not marked as __packed. This patch fixes the same and mark them as __packed. Fixes: 42006910 ("octeontx2-af: cleanup KPU config data") Signed-off-by: Suman Ghosh <sumang@marvell.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Siddh Raman Pant authored
[ Upstream commit c95f9195 ] llcp_sock_sendmsg() calls nfc_llcp_send_ui_frame() which in turn calls nfc_alloc_send_skb(), which accesses the nfc_dev from the llcp_sock for getting the headroom and tailroom needed for skb allocation. Parallelly the nfc_dev can be freed, as the refcount is decreased via nfc_free_device(), leading to a UAF reported by Syzkaller, which can be summarized as follows: (1) llcp_sock_sendmsg() -> nfc_llcp_send_ui_frame() -> nfc_alloc_send_skb() -> Dereference *nfc_dev (2) virtual_ncidev_close() -> nci_free_device() -> nfc_free_device() -> put_device() -> nfc_release() -> Free *nfc_dev When a reference to llcp_local is acquired, we do not acquire the same for the nfc_dev. This leads to freeing even when the llcp_local is in use, and this is the case with the UAF described above too. Thus, when we acquire a reference to llcp_local, we should acquire a reference to nfc_dev, and release the references appropriately later. References for llcp_local is initialized in nfc_llcp_register_device() (which is called by nfc_register_device()). Thus, we should acquire a reference to nfc_dev there. nfc_unregister_device() calls nfc_llcp_unregister_device() which in turn calls nfc_llcp_local_put(). Thus, the reference to nfc_dev is appropriately released later. Reported-and-tested-by: <syzbot+bbe84a4010eeea00982d@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=bbe84a4010eeea00982d Fixes: c7aa1225 ("NFC: Take a reference on the LLCP local pointer when creating a socket") Reviewed-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Siddh Raman Pant <code@siddh.me> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Douglas Anderson authored
[ Upstream commit aca58eac ] For aux reads, the value `msg->size` indicates the size of the buffer provided by `msg->buffer`. We should never in any circumstances write more bytes to the buffer since it may overflow the buffer. In the ti-sn65dsi86 driver there is one code path that reads the transfer length from hardware. Even though it's never been seen to be a problem, we should make extra sure that the hardware isn't increasing the length since doing so would cause us to overrun the buffer. Fixes: 982f589b ("drm/bridge: ti-sn65dsi86: Update reply on aux failures") Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231214123752.v3.2.I7b83c0f31aeedc6b1dc98c7c741d3e1f94f040f8@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Johannes Berg authored
[ Upstream commit 400f6ebb ] On older devices (before unified image!) we can end up calling stop_device from an rfkill interrupt. However, in stop_device we attempt to synchronize IRQs, which then of course deadlocks. Avoid this by checking the context, if running from the IRQ thread then don't synchronize. This wouldn't be correct on a new device since RSS is supported, but older devices only have a single interrupt/queue. Fixes: 37fb29bd ("wifi: iwlwifi: pcie: synchronize IRQs before NAPI") Reviewed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231215111335.59aab00baed7.Iadfe154d6248e7f9dfd69522e5429dbbd72925d7@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Bjorn Helgaas authored
commit f93e71ae upstream. This reverts commit 08d0cc5f. Michael reported that when attempting to resume from suspend to RAM on ASUS mini PC PN51-BB757MDE1 (DMI model: MINIPC PN51-E1), 08d0cc5f ("PCI/ASPM: Remove pcie_aspm_pm_state_change()") caused a 12-second delay with no output, followed by a reboot. Workarounds include: - Reverting 08d0cc5f ("PCI/ASPM: Remove pcie_aspm_pm_state_change()") - Booting with "pcie_aspm=off" - Booting with "pcie_aspm.policy=performance" - "echo 0 | sudo tee /sys/bus/pci/devices/0000:03:00.0/link/l1_aspm" before suspending - Connecting a USB flash drive Link: https://lore.kernel.org/r/20240102232550.1751655-1-helgaas@kernel.org Fixes: 08d0cc5f ("PCI/ASPM: Remove pcie_aspm_pm_state_change()") Reported-by: Michael Schaller <michael@5challer.de> Link: https://lore.kernel.org/r/76c61361-b8b4-435f-a9f1-32b716763d62@5challer.de Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Siddhesh Dharme authored
commit b6ce6e6c upstream. LEDs in 'HP ProBook 440 G6' laptop are controlled by ALC236 codec. Enable already existing quirk 'ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF' to fix mute and mic-mute LEDs. Signed-off-by: Siddhesh Dharme <siddheshdharme18@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240104060736.5149-1-siddheshdharme18@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sarthak Kukreti authored
commit 1364a3c3 upstream. Only call truncate_bdev_range() if the fallocate mode is supported. This fixes a bug where data in the pagecache could be invalidated if the fallocate() was called on the block device with an invalid mode. Fixes: 25f4c414 ("block: implement (some of) fallocate for block devices") Cc: stable@vger.kernel.org Reported-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sarthak Kukreti <sarthakkukreti@chromium.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Fixes: line? I've never seen those wrapped. Link: https://lore.kernel.org/r/20231011201230.750105-1-sarthakkukreti@chromium.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sarthak Kukreti <sarthakkukreti@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Edward Adam Davis authored
commit 1997b3cb upstream. The dns_resolver_preparse() function has a check on the size of the payload for the basic header of the binary-style payload, but is missing a check for the size of the V1 server-list payload header after determining that's what we've been given. Fix this by getting rid of the the pointer to the basic header and just assuming that we have a V1 server-list payload and moving the V1 server list pointer inside the if-statement. Dealing with other types and versions can be left for when such have been defined. This can be tested by doing the following with KASAN enabled: echo -n -e '\x0\x0\x1\x2' | keyctl padd dns_resolver foo @p and produces an oops like the following: BUG: KASAN: slab-out-of-bounds in dns_resolver_preparse+0xc9f/0xd60 net/dns_resolver/dns_key.c:127 Read of size 1 at addr ffff888028894084 by task syz-executor265/5069 ... Call Trace: dns_resolver_preparse+0xc9f/0xd60 net/dns_resolver/dns_key.c:127 __key_create_or_update+0x453/0xdf0 security/keys/key.c:842 key_create_or_update+0x42/0x50 security/keys/key.c:1007 __do_sys_add_key+0x29c/0x450 security/keys/keyctl.c:134 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x62/0x6a This patch was originally by Edward Adam Davis, but was modified by Linus. Fixes: b946001d3bb1 ("keys, dns: Allow key types (eg. DNS) to be reclaimed immediately on expiry") Reported-and-tested-by: <syzbot+94bbb75204a05da3d89f@syzkaller.appspotmail.com> Link: https://lore.kernel.org/r/0000000000009b39bc060c73e209@google.com/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: David Howells <dhowells@redhat.com> Cc: Edward Adam Davis <eadavis@qq.com> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Jeffrey E Altman <jaltman@auristor.com> Cc: Wang Lei <wang840925@gmail.com> Cc: Jeff Layton <jlayton@redhat.com> Cc: Steve French <sfrench@us.ibm.com> Cc: Marc Dionne <marc.dionne@auristor.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jeffrey E Altman <jaltman@auristor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Jan 05, 2024
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20240103164853.921194838@linuxfoundation.org Tested-by: SeongJae Park <sj@kernel.org> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Namjae Jeon <linkinjeon@kernel.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Ron Economos <re@w6rz.net> Tested-by: kernelci.org bot <bot@kernelci.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jiri Olsa authored
commit 4b7de801 upstream. Lee pointed out issue found by syscaller [0] hitting BUG in prog array map poke update in prog_array_map_poke_run function due to error value returned from bpf_arch_text_poke function. There's race window where bpf_arch_text_poke can fail due to missing bpf program kallsym symbols, which is accounted for with check for -EINVAL in that BUG_ON call. The problem is that in such case we won't update the tail call jump and cause imbalance for the next tail call update check which will fail with -EBUSY in bpf_arch_text_poke. I'm hitting following race during the program load: CPU 0 CPU 1 bpf_prog_load bpf_check do_misc_fixups prog_array_map_poke_track map_update_elem bpf_fd_array_map_update_elem prog_array_map_poke_run bpf_arch_text_poke returns -EINVAL bpf_prog_kallsyms_add After bpf_arch_text_poke (CPU 1) fails to update the tail call jump, the next poke update fails on expected jump instruction check in bpf_arch_text_poke with -EBUSY and triggers the BUG_ON in prog_array_map_poke_run. Similar race exists on the program unload. Fixing this by moving the update to bpf_arch_poke_desc_update function which makes sure we call __bpf_arch_text_poke that skips the bpf address check. Each architecture has slightly different approach wrt looking up bpf address in bpf_arch_text_poke, so instead of splitting the function or adding new 'checkip' argument in previous version, it seems best to move the whole map_poke_run update as arch specific code. [0] https://syzkaller.appspot.com/bug?extid=97a4fe20470e9bc30810 Fixes: ebf7d1f5 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT") Reported-by: <syzbot+97a4fe20470e9bc30810@syzkaller.appspotmail.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yonghong.song@linux.dev> Cc: Lee Jones <lee@kernel.org> Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20231206083041.1306660-2-jolsa@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Shevchenko authored
commit b295d484 upstream. It's not fully correct to take a const parameter pointer to a struct and return a non-const pointer to a member of that struct. Instead, introduce a const version of the dev_fwnode() API which takes and returns const pointers and use it where it's applicable. With this, convert dev_fwnode() to be a macro wrapper on top of const and non-const APIs that chooses one based on the type. Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Fixes: aade55c8 ("device property: Add const qualifier to device_get_match_data() parameter") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://lore.kernel.org/r/20221004092129.19412-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mikulas Patocka authored
commit b86f4b79 upstream. __bio_for_each_segment assumes that the first struct bio_vec argument doesn't change - it calls "bio_advance_iter_single((bio), &(iter), (bvl).bv_len)" to advance the iterator. Unfortunately, the dm-integrity code changes the bio_vec with "bv.bv_len -= pos". When this code path is taken, the iterator would be out of sync and dm-integrity would report errors. This happens if the machine is out of memory and "kmalloc" fails. Fix this bug by making a copy of "bv" and changing the copy instead. Fixes: 7eada909 ("dm: add integrity target") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (Google) authored
commit b803d7c6 upstream. To synchronize the timestamps with the ring buffer reservation, there are two timestamps that are saved in the buffer meta data. 1. before_stamp 2. write_stamp When the two are equal, the write_stamp is considered valid, as in, it may be used to calculate the delta of the next event as the write_stamp is the timestamp of the previous reserved event on the buffer. This is done by the following: /*A*/ w = current position on the ring buffer before = before_stamp after = write_stamp ts = read current timestamp if (before != after) { write_stamp is not valid, force adding an absolute timestamp. } /*B*/ before_stamp = ts /*C*/ write = local_add_return(event length, position on ring buffer) if (w == write - event length) { /* Nothing interrupted between A and C */ /*E*/ write_stamp = ts; delta = ts - after /* * If nothing interrupted again, * before_stamp == write_stamp and write_stamp * can be used to calculate the delta for * events that come in after this one. */ } else { /* * The slow path! * Was interrupted between A and C. */ This is the place that there's a bug. We currently have: after = write_stamp ts = read current timestamp /*F*/ if (write == current position on the ring buffer && after < ts && cmpxchg(write_stamp, after, ts)) { delta = ts - after; } else { delta = 0; } The assumption is that if the current position on the ring buffer hasn't moved between C and F, then it also was not interrupted, and that the last event written has a timestamp that matches the write_stamp. That is the write_stamp is valid. But this may not be the case: If a task context event was interrupted by softirq between B and C. And the softirq wrote an event that got interrupted by a hard irq between C and E. and the hard irq wrote an event (does not need to be interrupted) We have: /*B*/ before_stamp = ts of normal context ---> interrupted by softirq /*B*/ before_stamp = ts of softirq context ---> interrupted by hardirq /*B*/ before_stamp = ts of hard irq context /*E*/ write_stamp = ts of hard irq context /* matches and write_stamp valid */ <---- /*E*/ write_stamp = ts of softirq context /* No longer matches before_stamp, write_stamp is not valid! */ <--- w != write - length, go to slow path // Right now the order of events in the ring buffer is: // // |-- softirq event --|-- hard irq event --|-- normal context event --| // after = write_stamp (this is the ts of softirq) ts = read current timestamp if (write == current position on the ring buffer [true] && after < ts [true] && cmpxchg(write_stamp, after, ts) [true]) { delta = ts - after [Wrong!] The delta is to be between the hard irq event and the normal context event, but the above logic made the delta between the softirq event and the normal context event, where the hard irq event is between the two. This will shift all the remaining event timestamps on the sub-buffer incorrectly. The write_stamp is only valid if it matches the before_stamp. The cmpxchg does nothing to help this. Instead, the following logic can be done to fix this: before = before_stamp ts = read current timestamp before_stamp = ts after = write_stamp if (write == current position on the ring buffer && after == before && after < ts) { delta = ts - after } else { delta = 0; } The above will only use the write_stamp if it still matches before_stamp and was tested to not have changed since C. As a bonus, with this logic we do not need any 64-bit cmpxchg() at all! This means the 32-bit rb_time_t workaround can finally be removed. But that's for a later time. Link: https://lore.kernel.org/linux-trace-kernel/20231218175229.58ec3daf@gandalf.local.home/ Link: https://lore.kernel.org/linux-trace-kernel/20231218230712.3a76b081@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Fixes: dd939425 ("ring-buffer: Do not try to put back write_stamp") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pablo Neira Ayuso authored
commit 7315dc1e upstream. NFT_MSG_DELSET deactivates all elements in the set, skip set->ops->commit() to avoid the unnecessary clone (for the pipapo case) as well as the sync GC cycle, which could deactivate again expired elements in such set. Fixes: 5f68718b ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Reported-by: Kevin Rich <kevinrich1337@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Namjae Jeon authored
commit d10c7787 upstream. If ->NameOffset/Length is bigger than ->CreateContextsOffset/Length, ksmbd_check_message doesn't validate request buffer it correctly. So slab-out-of-bounds warning from calling smb_strndup_from_utf16() in smb2_open() could happen. If ->NameLength is non-zero, Set the larger of the two sums (Name and CreateContext size) as the offset and length of the data area. Reported-by: Yang Chaoming <lometsj@live.com> Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (Google) authored
commit 083e9f65 upstream. When filtering is enabled, a temporary buffer is created to place the content of the trace event output so that the filter logic can decide from the trace event output if the trace event should be filtered out or not. If it is to be filtered out, the content in the temporary buffer is simply discarded, otherwise it is written into the trace buffer. But if an interrupt were to come in while a previous event was using that temporary buffer, the event written by the interrupt would actually go into the ring buffer itself to prevent corrupting the data on the temporary buffer. If the event is to be filtered out, the event in the ring buffer is discarded, or if it fails to discard because another event were to have already come in, it is turned into padding. The update to the write_stamp in the rb_try_to_discard() happens after a fix was made to force the next event after the discard to use an absolute timestamp by setting the before_stamp to zero so it does not match the write_stamp (which causes an event to use the absolute timestamp). But there's an effort in rb_try_to_discard() to put back the write_stamp to what it was before the event was added. But this is useless and wasteful because nothing is going to be using that write_stamp for calculations as it still will not match the before_stamp. Remove this useless update, and in doing so, we remove another cmpxchg64()! Also update the comments to reflect this change as well as remove some extra white space in another comment. Link: https://lore.kernel.org/linux-trace-kernel/20231215081810.1f4f38fe@rorschach.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Vincent Donnefort <vdonnefort@google.com> Fixes: b2dd7975 ("ring-buffer: Force absolute timestamp on discard of event") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (Google) authored
commit 39a7dc23 upstream. If an application blocks on the snapshot or snapshot_raw files, expecting to be woken up when a snapshot occurs, it will not happen. Or it may happen with an unexpected result. That result is that the application will be reading the main buffer instead of the snapshot buffer. That is because when the snapshot occurs, the main and snapshot buffers are swapped. But the reader has a descriptor still pointing to the buffer that it originally connected to. This is fine for the main buffer readers, as they may be blocked waiting for a watermark to be hit, and when a snapshot occurs, the data that the main readers want is now on the snapshot buffer. But for waiters of the snapshot buffer, they are waiting for an event to occur that will trigger the snapshot and they can then consume it quickly to save the snapshot before the next snapshot occurs. But to do this, they need to read the new snapshot buffer, not the old one that is now receiving new data. Also, it does not make sense to have a watermark "buffer_percent" on the snapshot buffer, as the snapshot buffer is static and does not receive new data except all at once. Link: https://lore.kernel.org/linux-trace-kernel/20231228095149.77f5b45d@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Fixes: debdd57f ("tracing: Make a snapshot feature available from userspace") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (Google) authored
commit 623b1f89 upstream. The tracefs file "buffer_percent" is to allow user space to set a water-mark on how much of the tracing ring buffer needs to be filled in order to wake up a blocked reader. 0 - is to wait until any data is in the buffer 1 - is to wait for 1% of the sub buffers to be filled 50 - would be half of the sub buffers are filled with data 100 - is not to wake the waiter until the ring buffer is completely full Unfortunately the test for being full was: dirty = ring_buffer_nr_dirty_pages(buffer, cpu); return (dirty * 100) > (full * nr_pages); Where "full" is the value for "buffer_percent". There is two issues with the above when full == 100. 1. dirty * 100 > 100 * nr_pages will never be true That is, the above is basically saying that if the user sets buffer_percent to 100, more pages need to be dirty than exist in the ring buffer! 2. The page that the writer is on is never considered dirty, as dirty pages are only those that are full. When the writer goes to a new sub-buffer, it clears the contents of that sub-buffer. That is, even if the check was ">=" it would still not be equal as the most pages that can be considered "dirty" is nr_pages - 1. To fix this, add one to dirty and use ">=" in the compare. Link: https://lore.kernel.org/linux-trace-kernel/20231226125902.4a057f1d@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Fixes: 03329f99 ("tracing: Add tracefs file buffer_percentage") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Baokun Li authored
commit e2c27b80 upstream. The following concurrency may cause the data read to be inconsistent with the data on disk: cpu1 cpu2 ------------------------------|------------------------------ // Buffered write 2048 from 0 ext4_buffered_write_iter generic_perform_write copy_page_from_iter_atomic ext4_da_write_end ext4_da_do_write_end block_write_end __block_commit_write folio_mark_uptodate // Buffered read 4096 from 0 smp_wmb() ext4_file_read_iter set_bit(PG_uptodate, folio_flags) generic_file_read_iter i_size_write // 2048 filemap_read unlock_page(page) filemap_get_pages filemap_get_read_batch folio_test_uptodate(folio) ret = test_bit(PG_uptodate, folio_flags) if (ret) smp_rmb(); // Ensure that the data in page 0-2048 is up-to-date. // New buffered write 2048 from 2048 ext4_buffered_write_iter generic_perform_write copy_page_from_iter_atomic ext4_da_write_end ext4_da_do_write_end block_write_end __block_commit_write folio_mark_uptodate smp_wmb() set_bit(PG_uptodate, folio_flags) i_size_write // 4096 unlock_page(page) isize = i_size_read(inode) // 4096 // Read the latest isize 4096, but without smp_rmb(), there may be // Load-Load disorder resulting in the data in the 2048-4096 range // in the page is not up-to-date. copy_page_to_iter // copyout 4096 In the concurrency above, we read the updated i_size, but there is no read barrier to ensure that the data in the page is the same as the i_size at this point, so we may copy the unsynchronized page out. Hence adding the missing read memory barrier to fix this. This is a Load-Load reordering issue, which only occurs on some weak mem-ordering architectures (e.g. ARM64, ALPHA), but not on strong mem-ordering architectures (e.g. X86). And theoretically the problem doesn't only happen on ext4, filesystems that call filemap_read() but don't hold inode lock (e.g. btrfs, f2fs, ubifs ...) will have this problem, while filesystems with inode lock (e.g. xfs, nfs) won't have this problem. Link: https://lkml.kernel.org/r/20231213062324.739009-1-libaokun1@huawei.com Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: yangerkun <yangerkun@huawei.com> Cc: Yu Kuai <yukuai3@huawei.com> Cc: Zhang Yi <yi.zhang@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hyunwoo Kim authored
[ Upstream commit 2e07e834 ] This can cause a race with bt_sock_ioctl() because bt_sock_recvmsg() gets the skb from sk->sk_receive_queue and then frees it without holding lock_sock. A use-after-free for a skb occurs with the following flow. ``` bt_sock_recvmsg() -> skb_recv_datagram() -> skb_free_datagram() bt_sock_ioctl() -> skb_peek() ``` Add lock_sock to bt_sock_recvmsg() to fix this issue. Cc: stable@vger.kernel.org Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Paulo Alcantara authored
[ Upstream commit b35858b3 ] Validate @smb->WordCount to avoid reading off the end of @smb and thus causing the following KASAN splat: BUG: KASAN: slab-out-of-bounds in smbCalcSize+0x32/0x40 [cifs] Read of size 2 at addr ffff88801c024ec5 by task cifsd/1328 CPU: 1 PID: 1328 Comm: cifsd Not tainted 6.7.0-rc5 #9 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x4a/0x80 print_report+0xcf/0x650 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __phys_addr+0x46/0x90 kasan_report+0xd8/0x110 ? smbCalcSize+0x32/0x40 [cifs] ? smbCalcSize+0x32/0x40 [cifs] kasan_check_range+0x105/0x1b0 smbCalcSize+0x32/0x40 [cifs] checkSMB+0x162/0x370 [cifs] ? __pfx_checkSMB+0x10/0x10 [cifs] cifs_handle_standard+0xbc/0x2f0 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 cifs_demultiplex_thread+0xed1/0x1360 [cifs] ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 ? lockdep_hardirqs_on_prepare+0x136/0x210 ? __pfx_lock_release+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? mark_held_locks+0x1a/0x90 ? lockdep_hardirqs_on_prepare+0x136/0x210 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0xce/0xf0 ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] kthread+0x18d/0x1d0 ? kthread+0xdb/0x1d0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> This fixes CVE-2023-6606. Reported-by: <j51569436@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218218 Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Paulo Alcantara authored
[ Upstream commit 33eae65c ] A small CIFS buffer (448 bytes) isn't big enough to hold SMB2_QUERY_INFO request along with user's input data from CIFS_QUERY_INFO ioctl. That is, if the user passed an input buffer > 344 bytes, the client will memcpy() off the end of @req->Buffer in SMB2_query_info_init() thus causing the following KASAN splat: BUG: KASAN: slab-out-of-bounds in SMB2_query_info_init+0x242/0x250 [cifs] Write of size 1023 at addr ffff88801308c5a8 by task a.out/1240 CPU: 1 PID: 1240 Comm: a.out Not tainted 6.7.0-rc4 #5 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x4a/0x80 print_report+0xcf/0x650 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __phys_addr+0x46/0x90 kasan_report+0xd8/0x110 ? SMB2_query_info_init+0x242/0x250 [cifs] ? SMB2_query_info_init+0x242/0x250 [cifs] kasan_check_range+0x105/0x1b0 __asan_memcpy+0x3c/0x60 SMB2_query_info_init+0x242/0x250 [cifs] ? __pfx_SMB2_query_info_init+0x10/0x10 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 ? smb_rqst_len+0xa6/0xc0 [cifs] smb2_ioctl_query_info+0x4f4/0x9a0 [cifs] ? __pfx_smb2_ioctl_query_info+0x10/0x10 [cifs] ? __pfx_cifsConvertToUTF16+0x10/0x10 [cifs] ? kasan_set_track+0x25/0x30 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kasan_kmalloc+0x8f/0xa0 ? srso_alias_return_thunk+0x5/0xfbef5 ? cifs_strndup_to_utf16+0x12d/0x1a0 [cifs] ? __build_path_from_dentry_optional_prefix+0x19d/0x2d0 [cifs] ? __pfx_smb2_ioctl_query_info+0x10/0x10 [cifs] cifs_ioctl+0x11c7/0x1de0 [cifs] ? __pfx_cifs_ioctl+0x10/0x10 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 ? rcu_is_watching+0x23/0x50 ? srso_alias_return_thunk+0x5/0xfbef5 ? __rseq_handle_notify_resume+0x6cd/0x850 ? __pfx___schedule+0x10/0x10 ? blkcg_iostat_update+0x250/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 ? ksys_write+0xe9/0x170 __x64_sys_ioctl+0xc9/0x100 do_syscall_64+0x47/0xf0 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f893dde49cf Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 18 48 8b 44 24 18 64 48 2b 04 25 28 00 00 RSP: 002b:00007ffc03ff4160 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffc03ff4378 RCX: 00007f893dde49cf RDX: 00007ffc03ff41d0 RSI: 00000000c018cf07 RDI: 0000000000000003 RBP: 00007ffc03ff4260 R08: 0000000000000410 R09: 0000000000000001 R10: 00007f893dce7300 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffc03ff4388 R14: 00007f893df15000 R15: 0000000000406de0 </TASK> Fix this by increasing size of SMB2_QUERY_INFO request buffers and validating input length to prevent other callers from overflowing @req in SMB2_query_info_init() as well. Fixes: f5b05d62 ("cifs: add IOCTL for QUERY_INFO passthrough to userspace") Cc: stable@vger.kernel.org Reported-by: Robert Morris <rtm@csail.mit.edu> Signed-off-by: Paulo Alcantara <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nuno Sa authored
[ Upstream commit ee4d7905 ] This prevents the warning message "SPI driver has no spi_device_id for..." when registering the driver. More importantly, it makes sure that module autoloading works as spi relies on spi: modaliases and not of. While at it, move the of_device_id table to it's natural place. Fixes: fff7352b ("iio: imu: Add support for adis16475") Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231102125258.3284830-1-nuno.sa@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Andy Shevchenko authored
[ Upstream commit aea672d0 ] The proposed spi_get_device_match_data() helper is for retrieving a driver data associated with the ID in an ID table. First, it tries to get driver data of the device enumerated by firmware interface (usually Device Tree or ACPI). If none is found it falls back to the SPI ID table matching. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221020195421.10482-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Stable-dep-of: ee4d7905 ("iio: imu: adis16475: add spi_device_id table") Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Andy Shevchenko authored
[ Upstream commit aade55c8 ] Add const qualifier to the device_get_match_data() parameter. Some of the future users may utilize this function without forcing the type. All the same, dev_fwnode() may be used with a const qualifier. Reported-by: kernel test robot <lkp@intel.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220922135410.49694-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jose Ignacio Tornos Martinez authored
[ Upstream commit aef05e34 ] When the device is disconnected we get the following messages showing failed operations: Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19 The reason is that although the device is detached, normal stop and unbind operations are commanded from the driver. These operations are not necessary in this situation, so avoid these logs when the device is detached if the result of the operation is -ENODEV and if the new flag informing about the disconnecting status is enabled. cc: <stable@vger.kernel.org> Fixes: e2ca90c2 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20231207175007.263907-1-jtornosm@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Justin Chen authored
[ Upstream commit 50505316 ] - Check if wol is supported on reset instead of everytime get_wol is called. - Save wolopts in private data instead of relying on the HW to save it. - Defer enabling WoL until suspend instead of enabling it everytime set_wol is called. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: aef05e34 ("net: usb: ax88179_178a: avoid failed operations when device is disconnected") Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Justin Chen authored
[ Upstream commit 843f9205 ] Instead of passing in_pm flags all over the place, use the private struct to handle in_pm mode. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: aef05e34 ("net: usb: ax88179_178a: avoid failed operations when device is disconnected") Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jakub Kicinski authored
[ Upstream commit 76660757 ] This big patch sprinkles const on local variables and function arguments which may refer to netdev->dev_addr. Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Some of the changes here are not strictly required - const is sometimes cast off but pointer is not used for writing. It seems like it's still better to add the const in case the code changes later or relevant -W flags get enabled for the build. No functional changes. Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: aef05e34 ("net: usb: ax88179_178a: avoid failed operations when device is disconnected") Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
[ Upstream commit 7fbcd195 ] Here "temp" is the number of characters that we have written and "size" is the size of the buffer. The intent was clearly to say that if we have written to the end of the buffer then stop. However, for that to work the comparison should have been done on the original "size" value instead of the "size -= temp" value. Not only will that not trigger when we want to, but there is a small chance that it will trigger incorrectly before we want it to and we break from the loop slightly earlier than intended. This code was recently changed from using snprintf() to scnprintf(). With snprintf() we likely would have continued looping and passed a negative size parameter to snprintf(). This would have triggered an annoying WARN(). Now that we have converted to scnprintf() "size" will never drop below 1 and there is no real need for this test. We could change the condition to "if (temp <= 1) goto done;" but just deleting the test is cleanest. Fixes: 7d50195f ("usb: host: Faraday fotg210-hcd driver") Cc: stable <stable@kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/ZXmwIwHe35wGfgzu@suswa Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Tony Lindgren authored
[ Upstream commit 9b6a51aa ] With subtle timings changes, we can now sometimes get an external abort on non-linefetch error booting am3 devices at sysc_reset(). This is because of a missing reset delay needed for the usb target module. Looks like we never enabled the delay earlier for am3, although a similar issue was seen earlier with a similar usb setup for dm814x as described in commit ebf24414 ("ARM: OMAP2+: Use srst_udelay for USB on dm814x"). Cc: stable@vger.kernel.org Fixes: 0782e857 ("ARM: dts: Probe am335x musb with ti-sysc") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Namjae Jeon authored
[ Upstream commit a9f106c7 ] When client send SMB2_CREATE_ALLOCATION_SIZE create context, ksmbd update old size to ->AllocationSize in smb2 create response. ksmbd_vfs_getattr() should be called after it to get updated stat result. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Namjae Jeon authored
[ Upstream commit 658609d9 ] opinfo_put() could be called twice on error of smb21_lease_break_ack(). It will cause UAF issue if opinfo is referenced on other places. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-