Pull x86 resource control updates from Borislav Petkov:
 "Avoid IPI-ing a task in certain cases and prevent load/store tearing
  when accessing a task's resctrl fields concurrently"

* tag 'x86_cache_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Apply READ_ONCE/WRITE_ONCE to task_struct.{rmid,closid}
  x86/resctrl: Use task_curr() instead of task_struct->on_cpu to prevent unnecessary IPI
  x86/resctrl: Add printf attribute to log function

Pull x86 CPUID cleanup from Borislav Petkov:
 "Assign a dedicated feature word to a CPUID leaf which is widely used"

* tag 'x86_cpu_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpufeatures: Assign dedicated feature word for CPUID_0x8000001F[EAX]

Pull x86 FPU updates from Borislav Petkov:
 "x86 fpu usage optimization and cleanups:

   - make 64-bit kernel code which uses 387 insns request a x87 init
     (FNINIT) explicitly when using the FPU

   - misc cleanups"

* tag 'x86_fpu_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu/xstate: Use sizeof() instead of a constant
  x86/fpu/64: Don't FNINIT in kernel_fpu_begin()
  x86/fpu: Make the EFI FPU calling convention explicit

Pull x86 microcode cleanup from Borislav Petkov:
 "Make the driver init function static again"

* tag 'x86_microcode_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Make microcode_init() static

Pull x86 misc updates from Borislav Petkov:

 - Complete the MSR write filtering by applying it to the MSR ioctl
   interface too.

 - Other misc small fixups.

* tag 'x86_misc_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/MSR: Filter MSR writes through X86_IOC_WRMSR_REGS ioctl too
  selftests/fpu: Fix debugfs_simple_attr.cocci warning
  selftests/x86: Use __builtin_ia32_read/writeeflags
  x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk

Pull x86 mm cleanups from Borislav Petkov:

 - PTRACE_GETREGS/PTRACE_PUTREGS regset selection cleanup

 - Another initial cleanup - more to follow - to the fault handling
   code.

 - Other minor cleanups and corrections.

* tag 'x86_mm_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  x86/{fault,efi}: Fix and rename efi_recover_from_page_fault()
  x86/fault: Don't run fixups for SMAP violations
  x86/fault: Don't look for extable entries for SMEP violations
  x86/fault: Rename no_context() to kernelmode_fixup_or_oops()
  x86/fault: Bypass no_context() for implicit kernel faults from usermode
  x86/fault: Split the OOPS code out from no_context()
  x86/fault: Improve kernel-executing-user-memory handling
  x86/fault: Correct a few user vs kernel checks wrt WRUSS
  x86/fault: Document the locking in the fault_signal_pending() path
  x86/fault/32: Move is_f00f_bug() to do_kern_addr_fault()
  x86/fault: Fold mm_fault_error() into do_user_addr_fault()
  x86/fault: Skip the AMD erratum #91 workaround on unaffected CPUs
  x86/fault: Fix AMD erratum #91 errata fixup for user code
  x86/Kconfig: Remove HPET_EMULATE_RTC depends on RTC
  x86/asm: Fixup TASK_SIZE_MAX comment
  x86/ptrace: Clean up PTRACE_GETREGS/PTRACE_PUTREGS regset selection
  x86/vm86/32: Remove VM86_SCREEN_BITMAP support
  x86: Remove definition of DEBUG
  x86/entry: Remove now unused do_IRQ() declaration
  x86/mm: Remove duplicate definition of _PAGE_PAT_LARGE
  ...

Pull x86 paravirt updates from Borislav Petkov:
 "Part one of a major conversion of the paravirt infrastructure to our
  kernel patching facilities and getting rid of the custom-grown ones"

* tag 'x86_paravirt_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/pv: Rework arch_local_irq_restore() to not use popf
  x86/xen: Drop USERGS_SYSRET64 paravirt call
  x86/pv: Switch SWAPGS to ALTERNATIVE
  x86/xen: Use specific Xen pv interrupt entry for DF
  x86/xen: Use specific Xen pv interrupt entry for MCE

Pull x86 platform updates from Borislav Petkov:

 - Convert geode drivers to look up the LED controls from a GPIO machine
   descriptor table.

 - Remove arch/x86/platform/goldfish as it is not used by the android
   emulator anymore.

* tag 'x86_platform_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/geode: Convert alix LED to GPIO machine descriptor
  x86/platform/geode: Convert geode LED to GPIO machine descriptor
  x86/platform/geode: Convert net5501 LED to GPIO machine descriptor
  x86/platform: Retire arch/x86/platform/goldfish
  x86/platform/intel-mid: Convert comma to semicolon

Pull x86 SEV-ES fix from Borislav Petkov:
 "Do not unroll string I/O for SEV-ES guests because they support it"

* tag 'x86_seves_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev-es: Do not unroll string I/O for SEV-ES guests

Pull x86 SGX fixes from Borislav Petkov:
 "Random small fixes which missed the initial SGX submission. Also, some
  procedural clarifications"

* tag 'x86_sgx_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Add Dave Hansen as reviewer for INTEL SGX
  x86/sgx: Drop racy follow_pfn() check
  MAINTAINERS: Fix the tree location for INTEL SGX patches
  x86/sgx: Fix the return type of sgx_init()

Pull EFI updates from Ard Biesheuvel via Borislav Petkov:
 "A few cleanups left and right, some of which were part of a initrd
  measured boot series that needs some more work, and so only the
  cleanup patches have been included for this release"

* tag 'efi-next-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/arm64: Update debug prints to reflect other entropy sources
  efi: x86: clean up previous struct mm switching
  efi: x86: move mixed mode stack PA variable out of 'efi_scratch'
  efi/libstub: move TPM related prototypes into efistub.h
  efi/libstub: fix prototype of efi_tcg2_protocol::get_event_log()
  efi/libstub: whitespace cleanup
  efi: ia64: move IA64-only declarations to new asm/efi.h header

Pull RAS updates from Borislav Petkov:

 - move therm_throt.c to the thermal framework, where it belongs.

 - identify CPUs which miss to enter the broadcast handler, as an
   additional debugging aid.

* tag 'ras_updates_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  thermal: Move therm_throt there from x86/mce
  x86/mce: Get rid of mcheck_intel_therm_init()
  x86/mce: Make mce_timed_out() identify holdout CPUs

Pull EDAC updates from Borislav Petkov:

 - a couple of fixes/improvements to amd64_edac:
    * merge debugging and error injection functionality into the main driver
    * tone down info/error output
    * do not attempt to load it on F15h client hw

 - misc fixes to other drivers

* tag 'edac_updates_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/amd64: Issue probing messages only on properly detected hardware
  EDAC/xgene: Do not print a failure message to get an IRQ twice
  EDAC/ppc4xx: Convert comma to semicolon
  EDAC/amd64: Limit error injection functionality to supported hw
  EDAC/amd64: Merge error injection sysfs facilities
  EDAC/amd64: Merge sysfs debugging attributes setup code
  EDAC/amd64: Tone down messages about missing PCI IDs
  EDAC/amd64: Do not load on family 0x15, model 0x13

Pull ARM SoC driver updates from Arnd Bergmann:
 "Updates for SoC specific drivers include a few subsystems that have
  their own maintainers but send them through the soc tree:

  SCMI firmware:
   - add support for a completion interrupt

  Reset controllers:
   - new driver for BCM4908
   - new devm_reset_control_get_optional_exclusive_released() function

  Memory controllers:
   - Renesas RZ/G2 support
   - Tegra124 interconnect support
   - Allow more drivers to be loadable modules

  TEE/optee firmware:
   - minor code cleanup

  The other half of this is SoC specific drivers that do not belong into
  any other subsystem, most of them living in drivers/soc:

   - Allwinner/sunxi power management work
   - Allwinner H616 support

   - ASpeed AST2600 system identification support

   - AT91 SAMA7G5 SoC ID driver
   - AT91 SoC driver cleanups

   - Broadcom BCM4908 power management bus support

   - Marvell mbus cleanups

   - Mediatek MT8167 power domain support

   - Qualcomm socinfo driver support for PMIC
   - Qualcomm SoC identification for many more products

   - TI Keystone driver cleanups for PRUSS and elsewhere"

* tag 'arm-drivers-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (89 commits)
  soc: aspeed: socinfo: Add new systems
  soc: aspeed: snoop: Add clock control logic
  memory: tegra186-emc: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
  memory: samsung: exynos5422-dmc: Correct function names in kerneldoc
  memory: ti-emif-pm: Drop of_match_ptr from of_device_id table
  optee: simplify i2c access
  drivers: soc: atmel: fix type for same7
  tee: optee: remove need_resched() before cond_resched()
  soc: qcom: ocmem: don't return NULL in of_get_ocmem
  optee: sync OP-TEE headers
  tee: optee: fix 'physical' typos
  drivers: optee: use flexible-array member instead of zero-length array
  tee: fix some comment typos in header files
  soc: ti: k3-ringacc: Use of_device_get_match_data()
  soc: ti: pruss: Refactor the CFG sub-module init
  soc: mediatek: pm-domains: Don't print an error if child domain is deferred
  soc: mediatek: pm-domains: Add domain regulator supply
  dt-bindings: power: Add domain regulator supply
  soc: mediatek: cmdq: Remove cmdq_pkt_flush()
  soc: mediatek: pm-domains: Add support for mt8167
  ...

Pull ARM SoC devicetree updates from Arnd Bergmann:
 "After the last release contained a surprising amount of new 32-bit
  machines, this time two thirds of the code changes are for 64-bit.

  The usual updates to existing files include:

   - Device tree compiler warning fixes for Berlin, Renesas, SoCFPGA,
     nomadik, stm32, Allwinner, TI Keystone

   - Support for additional devices on existing machines on Renesas,
     SoCFPGA, at91, hisilicon, OMAP, Tegra, TI K3, Allwinner, Broadcom,
     ux500, Mediatek, Marvell Armada, Marvell MMP, ZynqMP, AMLogic,
     Qualcomm, i.MX, Layerscape, Actions, ASpeed, Toshiba

   - Cleanups and minor fixes for Renesas, at91, mstar, ux500, Samsung,
     stm32, Tegra, Broadcom, Mediatek, Marvell MMP, AMLogic, Qualcomm,
     i.MX, Rockchip, ASpeed, Zynq

  Only three new SoCs this time, but a number of boards across:

  Renesas:
   - Two Beacon EmbeddedWorks boards (RZ/G2H and RZ/G2N based)

  Intel SoCFPGA:
   - eASIC N5X board (N5X)

  ST-Ericsson Ux500:
   - Samsung GT-I9070 (Janice) phone (u8500)

  TI OMAP:
   - MYIR Tech Limited development board (AM335X)

  Allwinner/sunxi:
   - SL631 Action Camera (V3)
   - PineTab Early Adopter tablet (A64)

  Broadcom:
   - BCM4906 networking chip
   - Netgear R8000P router (BCM4906)

  AMLogic:
   - Hardkernel ODROID-HC4 development board (SM1)
   - Beelink GS-King-X TV Box (S922X)

  Qualcomm:
   - Snapdragon 888 / SM8350 high-end phone SoC
   - Qualcomm SDX55 5G modem as standalone SoC
   - Snapdragon MTP reference board (SM8350)
   - Snapdragon MTP reference board (SDX55)
   - Sony Kitakami phones: Xperia Z3+/Z4/Z5 (APQ8094)
   - Alcatel Idol 3 phone (MSM8916)
   - ASUS Zenfone 2 Laser phone (MSM8916)
   - BQ Aquaris X5 aka Longcheer L8910 phone (MSM8916)
   - OnePlus6 phone (SDM845)
   - OnePlus6T phone (SDM845)
   - Alfa Network AP120C-AC access point (IPQ4018)

  NXP i.MX6 (32-bit):
   - Plymovent BAS base system controller for filter systems (imx6dl)
   - Protonic MVT industrial touchscreen terminals (imx6dl)
   - Protonic PRTI6G reference board (imx6ul)
   - Kverneland UT1, UT1Q, UT1P, TGO agricultural terminals (imx6q/dl/qp)

  NXP i.MX8 (64-bit)
   - Beacon i.MX8M Nano development kit (imx8mn)
   - Boundary Devices i.MX8MM Nitrogen SBC (imx8mm)
   - Gateworks Venice i.MX 8M Mini Development Kits (imx8mm)
   - phyBOARD-Pollux-i.MX8MP (imx8mp)
   - Purism Librem5 Evergreen phone (imx8mp)
   - Kontron SMARC-sAL28 system-on-module(imx8mp)

  Rockchip:
   - NanoPi M4B Single-board computer (RK3399)
   - Radxa Rock Pi E router SBC (RK3328)

  ASpeed:
   - Ampere Mt. Jade, a BMC for an x86 server (AST2500)
   - IBM Everest, a BMC for a Power10 server (AST2600)
   - Supermicro x11spi, a BMC for an ARM server (AST2500)

  Zynq:
   - Ebang EBAZ4205, FPGA board (Zynq-7000)
   - ZynqMP zcu104 revC reference platform (ZynqMP)"

* tag 'arm-dt-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (584 commits)
  ARM: dts: aspeed: align GPIO hog names with dtschema
  ARM: dts: aspeed: fix PCA95xx GPIO expander properties on Portwell
  dt-bindings: spi: zynq: Convert Zynq QSPI binding to yaml
  arm: dts: visconti: Add DT support for Toshiba Visconti5 GPIO driver
  ARM: dts: aspeed: ast2600evb: Add enable ehci and uhci
  ARM: dts: aspeed: mowgli: Add i2c rtc device
  ARM: dts: aspeed: amd-ethanolx: Enable secondary LPC snooping address
  dt-bindings: arm: xilinx: Add missing Zturn boards
  ARM: dts: ebaz4205: add pinctrl entries for switches
  ARM: dts: add Ebang EBAZ4205 device tree
  dt-bindings: arm: add Ebang EBAZ4205 board
  dt-bindings: add ebang vendor prefix
  ARM: dts: aspeed: Add Everest BMC machine
  ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver
  ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names
  ARM: dts: aspeed: Add Supermicro x11spi BMC machine
  ARM: dts: aspeed: g220a: Fix some gpio
  ARM: dts: aspeed: g220a: Enable ipmb
  ARM: dts: aspeed: rainier: Add eMMC clock phase compensation
  ARM: dts: aspeed: Add LCLK to lpc-snoop
  ...

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "As usual, a number of additional device drivers that were added to the
  kernel are now enabled in the respective configuration files.

  A few of the files get updated to match the current Kconfig files for
  removed or renamed options"

* tag 'arm-defconfig-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
  ARM: configs: sama5_defconfig: add QSPI driver
  ARM: configs: at91_dt_defconfig: add ov7740 module
  ARM: configs: at91_dt_defconfig: add useful helper options
  ARM: configs: at91: DT/ATAG defconfig modifications
  ARM: configs: sama5_defconfig: update and remove unneeded options
  ARM: configs: at91: enable drivers for sam9x60
  arm64: defconfig: Enable RT5659
  arm64: configs: Support DEVAPC on MediaTek platforms
  arm64: configs: Support pwrap on Mediatek MT6779 platform
  arm64: defconfig: Enable PF8x00 as builtin
  ARM: multi_v7_defconfig: add STM32 CEC support
  arm64: defconfig: Enable vibra-pwm
  ARM: omap2plus_defconfig: Update for dropped options
  ARM: omap2plus_defconfig: Update for moved options
  ARM: multi_v7_defconfig: Enable nvmem's rmem driver
  arm64: defconfig: Enable nvmem's rmem driver
  ARM: multi_v7_defconfig: Enable support for the ADC thermal sensor
  ARM: qcom_defconfig: Enable Command DB driver
  ARM: qcom_defconfig: Enable RPMh power domain driver
  ARM: qcom_defconfig: Enable ARM PSCI support
  ...

Pull ARM SoC updates from Arnd Bergmann:
 "This is mostly 32-bit code for SoC platforms, and looks smaller than
  any such branch I remember from previous kernels, as most of this is
  now handled in other subsystems for modern platforms:

   - Minor bugfixes and Kconfig updates for Tegra, Broadcom, i.MX,
     Renesas, and Samsung

   - Updates to the MAINTAINERS listing for Actions, OMAP, and Samsung

   - Samsung SoC driver updates to make them loadable modules"

* tag 'arm-soc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: arm: samsung: include S3C headers in platform entry
  MAINTAINERS: Add linux-actions ML for Actions Semi Arch
  ARM: s3c: irq-s3c24xx: staticize local functions
  ARM: s3c: irq-s3c24xx: include headers for missing declarations
  ARM: s3c: fix fiq for clang IAS
  ARM: imx: Remove unused IMX_GPIO_NR() macro
  soc: renesas: rcar-sysc: Mark device node OF_POPULATED after init
  ARM: OMAP2+: fix spellint typo
  MAINTAINERS: Update address for OMAP GPMC driver
  soc: renesas: rcar-sysc: Use readl_poll_timeout_atomic()
  ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835
  ARM: brcmstb: Add debug UART entry for 72116
  ARM: tegra: Don't enable unused PLLs on resume from suspend
  soc: samsung: pm_domains: Convert to regular platform driver
  soc: samsung: exynos-chipid: correct helpers __init annotation
  ARM: mach-imx: imx6ul: Print SOC revision on boot
  ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup
  soc: samsung: exynos-chipid: convert to driver and merge exynos-asv
  soc: samsung: exynos-asv: handle reading revision register error
  soc: samsung: exynos-asv: don't defer early on not-supported SoCs

Pull ARM SoC platform removals from Arnd Bergmann:
 "There are a lot of platforms that have not seen any interesting code
  changes in the past five years or more.

  I made a list and asked around which ones are no longer in use, and
  received confirmation about six ARM platforms and the TI C6x
  architecture that have all reached the end of their life upstream,
  with no known users remaining:

   - efm32 - added in 2011, first Cortex-M, no notable changes after 2013

   - picoxcell - added in 2011, abandoned after 2012 acquisition

   - prima2 - added in 20111, no notable changes since 2015

   - tango - added in 2015, sporadic changes until 2017, but abandoned

   - u300 - added in 2009, no notable changes since 2013

   - zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes

   - arch/c6x - added in 2011, but work stalled soon after that

  A number of other platforms on the original list turned out to still
  have users. In some cases there are out-of-tree patches and users that
  plan to contribute them in the future, in other cases the code is
  complete and works reliably"

Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/

* tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: remove u300 platform
  ARM: remove tango platform
  ARM: remove zte zx platform
  ARM: remove sirf prima2/atlas platforms
  c6x: remove architecture
  MAINTAINERS: Remove deleted platform efm32
  ARM: drop efm32 platform
  ARM: Remove PicoXcell platform support
  ARM: dts: Remove PicoXcell platforms

Pull ARM SoC fixes from Arnd Bergmann:
 "There are only two left-over remaining non-urgent ARM SoC bug fixes:

   - A build fix for the Atmel SAM9 platform to allow building with the
     clang integrated assembler

   - A DT fix for ethernet on Intel SoCFPGA, this has been broken since
     it was added in v5.4"

* tag 'arm-fixes-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: at91: use proper asm syntax in pm_suspend
  arm64: dts: agilex: fix phy interface bit shift for gmac1 and gmac2

Pull networking updates from David Miller:
 "Here is what we have this merge window:

   1) Support SW steering for mlx5 Connect-X6Dx, from Yevgeny Kliteynik.

   2) Add RSS multi group support to octeontx2-pf driver, from Geetha
      Sowjanya.

   3) Add support for KS8851 PHY. From Marek Vasut.

   4) Add support for GarfieldPeak bluetooth controller from Kiran K.

   5) Add support for half-duplex tcan4x5x can controllers.

   6) Add batch skb rx processing to bcrm63xx_enet, from Sieng Piaw
      Liew.

   7) Rework RX port offload infrastructure, particularly wrt, UDP
      tunneling, from Jakub Kicinski.

   8) Add BCM72116 PHY support, from Florian Fainelli.

   9) Remove Dsa specific notifiers, they are unnecessary. From Vladimir
      Oltean.

  10) Add support for picosecond rx delay in dwmac-meson8b chips. From
      Martin Blumenstingl.

  11) Support TSO on xfrm interfaces from Eyal Birger.

  12) Add support for MP_PRIO to mptcp stack, from Geliang Tang.

  13) Support BCM4908 integrated switch, from Rafał Miłecki.

  14) Support for directly accessing kernel module variables via module
      BTF info, from Andrii Naryiko.

  15) Add DASH (esktop and mobile Architecture for System Hardware)
      support to r8169 driver, from Heiner Kallweit.

  16) Add rx vlan filtering to dpaa2-eth, from Ionut-robert Aron.

  17) Add support for 100 base0x SFP devices, from Bjarni Jonasson.

  18) Support link aggregation in DSA, from Tobias Waldekranz.

  19) Support for bitwidse atomics in bpf, from Brendan Jackman.

  20) SmartEEE support in at803x driver, from Russell King.

  21) Add support for flow based tunneling to GTP, from Pravin B Shelar.

  22) Allow arbitrary number of interconnrcts in ipa, from Alex Elder.

  23) TLS RX offload for bonding, from Tariq Toukan.

  24) RX decap offklload support in mac80211, from Felix Fietkou.

  25) devlink health saupport in octeontx2-af, from George Cherian.

  26) Add TTL attr to SCM_TIMESTAMP_OPT_STATS, from Yousuk Seung

  27) Delegated actionss support in mptcp, from Paolo Abeni.

  28) Support receive timestamping when doin zerocopy tcp receive. From
      Arjun Ray.

  29) HTB offload support for mlx5, from Maxim Mikityanskiy.

  30) UDP GRO forwarding, from Maxim Mikityanskiy.

  31) TAPRIO offloading in dsa hellcreek driver, from Kurt Kanzenbach.

  32) Weighted random twos choice algorithm for ipvs, from Darby Payne.

  33) Fix netdev registration deadlock, from Johannes Berg.

  34) Various conversions to new tasklet api, from EmilRenner Berthing.

  35) Bulk skb allocations in veth, from Lorenzo Bianconi.

  36) New ethtool interface for lane setting, from Danielle Ratson.

  37) Offload failiure notifications for routes, from Amit Cohen.

  38) BCM4908 support, from Rafał Miłecki.

  39) Support several new iwlwifi chips, from Ihab Zhaika.

  40) Flow drector support for ipv6 in i40e, from Przemyslaw Patynowski.

  41) Support for mhi prrotocols, from Loic Poulain.

  42) Optimize bpf program stats.

  43) Implement RFC6056, for better port randomization, from Eric
      Dumazet.

  44) hsr tag offloading support from George McCollister.

  45) Netpoll support in qede, from Bhaskar Upadhaya.

  46) 2005/400g speed support in bonding 3ad mode, from Nikolay
      Aleksandrov.

  47) Netlink event support in mptcp, from Florian Westphal.

  48) Better skbuff caching, from Alexander Lobakin.

  49) MRP (Media Redundancy Protocol) offloading in DSA and a few
      drivers, from Horatiu Vultur.

  50) mqprio saupport in mvneta, from Maxime Chevallier.

  51) Remove of_phy_attach, no longer needed, from Florian Fainelli"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1766 commits)
  octeontx2-pf: Fix otx2_get_fecparam()
  cteontx2-pf: cn10k: Prevent harmless double shift bugs
  net: stmmac: Add PCI bus info to ethtool driver query output
  ptp: ptp_clockmatrix: clean-up - parenthesis around a == b are unnecessary
  ptp: ptp_clockmatrix: Simplify code - remove unnecessary `err` variable.
  ptp: ptp_clockmatrix: Coding style - tighten vertical spacing.
  ptp: ptp_clockmatrix: Clean-up dev_*() messages.
  ptp: ptp_clockmatrix: Remove unused header declarations.
  ptp: ptp_clockmatrix: Add alignment of 1 PPS to idtcm_perout_enable.
  ptp: ptp_clockmatrix: Add wait_for_sys_apll_dpll_lock.
  net: stmmac: dwmac-sun8i: Add a shutdown callback
  net: stmmac: dwmac-sun8i: Minor probe function cleanup
  net: stmmac: dwmac-sun8i: Use reset_control_reset
  net: stmmac: dwmac-sun8i: Remove unnecessary PHY power check
  net: stmmac: dwmac-sun8i: Return void from PHY unpower
  r8169: use macro pm_ptr
  net: mdio: Remove of_phy_attach()
  net: mscc: ocelot: select PACKING in the Kconfig
  net: re-solve some conflicts after net -> net-next merge
  net: dsa: tag_rtl4_a: Support also egress tags
  ...

Static checkers complained about an off by one read overflow in
otx2_get_fecparam() and we applied two conflicting fixes for it.

Correct: b0aae0bd ("octeontx2: Fix condition.")
  Wrong: 93efb0c6 ("octeontx2-pf: Fix out-of-bounds read in otx2_get_fecparam()")

Revert the incorrect fix.

Fixes: 93efb0c6

 ("octeontx2-pf: Fix out-of-bounds read in otx2_get_fecparam()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These defines are used with set_bit() and test_bit() which take a bit
number.  In other words, the code is doing:

	if (BIT(BIT(1)) & pf->hw.cap_flag) {

This was done consistently so it did not cause a problem at runtime but
it's still worth fixing.

Fixes: facede82

 ("octeontx2-pf: cn10k: Add mbox support for CN10K")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch populates the PCI bus info in the ethtool driver query data.

Users will be able to view PCI bus info using 'ethtool -i <interface>'.

Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vincent Cheng says:

====================
ptp: ptp_clockmatrix: Fix output 1 PPS alignment.

This series fixes a race condition that may result in the output clock
not aligned to internal 1 PPS clock.

Part of device initialization is to align the rising edge of output
clocks to the internal rising edge of the 1 PPS clock.  If the system
APLL and DPLL are not locked when this alignment occurs, the alignment
fails and a fixed offset between the internal 1 PPS clock and the
output clock occurs.

If a clock is dynamically enabled after power-up, the output clock
also needs to be aligned to the internal 1 PPS clock.

v3:
Suggested by: Jakub Kicinski <kuba@kernel.org>
- Remove unnecessary 'err' variable
- Increase msleep()/loop accuracy by using jiffies in while()
- No empty lines between variables
- No empty lines between call and the if
- parenthesis around a == b are unnecessary
- Inconsistent \n usage in dev_()
- Remove unnecessary empty line
- Leave string format in place so static code checkers can
  validate arguments

v2:
Suggested by: Richard Cochran <richardcochran@gmail.com>
- Added const to "char * fmt"
- Break unrelated header change into separate patch
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Code clean-up.

Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Code clean-up.

Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Code clean-up.

* Remove blank line between variable declarations.
* Remove blank line between:
	err = blah(...)

	if (err)
		...
* Remove unnecessary blank line before/after loop constructs.

Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Code clean-up.

* Remove unnecessary \n termination from dev_*() messages.
* Remove 'char *fmt' to define strings to stay within 80 column
  limit.  Not needed since coding guidelines increased to
  100 columns limit.
  Keeping format in place allows static code checkers to
  validate the arguments.
* Tighten up vertical spacing.

Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Removed unused header declarations.

Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When enabling output using PTP_CLK_REQ_PEROUT, need to align the output
clock to the internal 1 PPS clock.

Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Part of the device initialization aligns the rising edge of the output
clock to the internal 1 PPS clock. If the system APLL and DPLL is not
locked, then the alignment will fail and there will be a fixed offset
between the internal 1 PPS clock and the output clock.

After loading the device firmware, poll the system APLL and DPLL for
locked state prior to initialization, timing out after 2 seconds.

Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Samuel Holland says:

====================
dwmac-sun8i cleanup and shutdown hook

These patches clean up some things I noticed while fixing suspend/resume
behavior. The first four are minor code improvements. The last one adds
a shutdown hook to minimize power consumption on boards without a PMIC.

Changes v1 to v2:
  - Note the assumption of exclusive reset controller access in patch 3
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

The Ethernet MAC and PHY are usually major consumers of power on boards
which may not be able to fully power off (those with no PMIC). Powering
down the MAC and internal PHY saves power while these boards are "off".

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adjust the spacing and use an explicit "return 0" in the success path
to make the function easier to parse.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the appropriate function instead of reimplementing it,
and update the error message to match the code.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

sun8i_dwmac_unpower_internal_phy already checks if the PHY is powered,
so there is no need to do it again here.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a deinitialization function that always returned zero, and that
return value was always ignored. Have it return void instead.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use macro pm_ptr(), this helps to avoid some ifdeffery.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next:

1) Add two helper functions to release one table and hooks from
   the netns and netlink event path.

2) Add table ownership infrastructure, this new infrastructure allows
   users to bind a table (and its content) to a process through the
   netlink socket.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

We have no in-tree users, also update the sfp-phylink.rst documentation
to indicate that phy_attach_direct() is used instead of of_phy_attach().

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>