Having a page in LRU add cache offsets page refcount and gives
false-negative on PageLRU().  It reduces collapse success rate.

Drain all LRU add caches before scanning.  It happens relatively rare and
should not disturb the system too much.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Link: http://lkml.kernel.org/r/20200416160026.16538-4-kirill.shutemov@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

__collapse_huge_page_swapin() checks the number of referenced PTE to
decide if the memory range is hot enough to justify swapin.

We have few problems with the approach:

 - It is way too late: we can do the check much earlier and safe time.
   khugepaged_scan_pmd() already knows if we have any pages to swap in
   and number of referenced page.

 - It stops collapse altogether if there's not enough referenced pages,
   not only swappingin.

Fix it by making the right check early. We also can avoid additional
page table scanning if khugepaged_scan_pmd() haven't found any swap
entries.

Fixes: 0db501f7

 ("mm, thp: convert from optimistic swapin collapsing to conservative")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Link: http://lkml.kernel.org/r/20200416160026.16538-3-kirill.shutemov@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "thp/khugepaged improvements and CoW semantics", v4.

The patchset adds khugepaged selftest (anon-THP only for now), expands
cases khugepaged can handle and switches anon-THP copy-on-write handling
to 4k.

This patch (of 8):

The test checks if khugepaged is able to recover huge page where we expect
to do so.  It only covers anon-THP for now.

Currently the test shows few failures.  They are going to be addressed by
the following patches.

[colin.king@canonical.com: fix several spelling mistakes]
  Link: http://lkml.kernel.org/r/20200420084241.65433-1-colin.king@canonical.com
[aneesh.kumar@linux.ibm.com: replace the usage of system(3) in the test]
  Link: http://lkml.kernel.org/r/20200429110727.89388-1-aneesh.kumar@linux.ibm.com
[kirill@shutemov.name: fixup for issues I've noticed]
  Link: http://lkml.kernel.org/r/20200429124816.jp272trghrzxx5j5@box
[jhubbard@nvidia.com: add khugepaged to .gitignore]
  Link: http://lkml.kernel.org/r/20200517002509.362401-1-jhubbard@nvidia.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Link: http://lkml.kernel.org/r/20200416160026.16538-1-kirill.shutemov@linux.intel.com
Link: http://lkml.kernel.org/r/20200416160026.16538-2-kirill.shutemov@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add missing line breaks on pr_warn().

Signed-off-by: Chen Tao <chentao107@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200603063547.235825-1-chentao107@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add Documentation for multithreaded jobs.

Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Josh Triplett <josh@joshtriplett.org>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Link: http://lkml.kernel.org/r/20200527173608.2885243-9-daniel.m.jordan@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Using padata during deferred init has only been tested on x86, so for now
limit it to this architecture.

If another arch wants this, it can find the max thread limit that's best
for it and override deferred_page_init_max_threads().

Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Josh Triplett <josh@joshtriplett.org>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Link: http://lkml.kernel.org/r/20200527173608.2885243-8-daniel.m.jordan@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Deferred struct page init is a significant bottleneck in kernel boot.
Optimizing it maximizes availability for large-memory systems and allows
spinning up short-lived VMs as needed without having to leave them
running.  It also benefits bare metal machines hosting VMs that are
sensitive to downtime.  In projects such as VMM Fast Restart[1], where
guest state is preserved across kexec reboot, it helps prevent application
and network timeouts in the guests.

Multithread to take full advantage of system memory bandwidth.

The maximum number of threads is capped at the number of CPUs on the node
because speedups always improve with additional threads on every system
tested, and at this phase of boot, the system is otherwise idle and
waiting on page init to finish.

Helper threads operate on section-aligned ranges to both avoid false
sharing when setting the pageblock's migrate type and to avoid accessing
uninitialized buddy pages, though max order alignment is enough for the
latter.

The minimum chunk size is also a section.  There was benefit to using
multiple threads even on relatively small memory (1G) systems, and this is
the smallest size that the alignment allows.

The time (milliseconds) is the slowest node to initialize since boot
blocks until all nodes finish.  intel_pstate is loaded in active mode
without hwp and with turbo enabled, and intel_idle is active as well.

    Intel(R) Xeon(R) Platinum 8167M CPU @ 2.00GHz (Skylake, bare metal)
      2 nodes * 26 cores * 2 threads = 104 CPUs
      384G/node = 768G memory

                   kernel boot                 deferred init
                   ------------------------    ------------------------
    node% (thr)    speedup  time_ms (stdev)    speedup  time_ms (stdev)
          (  0)         --   4089.7 (  8.1)         --   1785.7 (  7.6)
       2% (  1)       1.7%   4019.3 (  1.5)       3.8%   1717.7 ( 11.8)
      12% (  6)      34.9%   2662.7 (  2.9)      79.9%    359.3 (  0.6)
      25% ( 13)      39.9%   2459.0 (  3.6)      91.2%    157.0 (  0.0)
      37% ( 19)      39.2%   2485.0 ( 29.7)      90.4%    172.0 ( 28.6)
      50% ( 26)      39.3%   2482.7 ( 25.7)      90.3%    173.7 ( 30.0)
      75% ( 39)      39.0%   2495.7 (  5.5)      89.4%    190.0 (  1.0)
     100% ( 52)      40.2%   2443.7 (  3.8)      92.3%    138.0 (  1.0)

    Intel(R) Xeon(R) CPU E5-2699C v4 @ 2.20GHz (Broadwell, kvm guest)
      1 node * 16 cores * 2 threads = 32 CPUs
      192G/node = 192G memory

                   kernel boot                 deferred init
                   ------------------------    ------------------------
    node% (thr)    speedup  time_ms (stdev)    speedup  time_ms (stdev)
          (  0)         --   1988.7 (  9.6)         --   1096.0 ( 11.5)
       3% (  1)       1.1%   1967.0 ( 17.6)       0.3%   1092.7 ( 11.0)
      12% (  4)      41.1%   1170.3 ( 14.2)      73.8%    287.0 (  3.6)
      25% (  8)      47.1%   1052.7 ( 21.9)      83.9%    177.0 ( 13.5)
      38% ( 12)      48.9%   1016.3 ( 12.1)      86.8%    144.7 (  1.5)
      50% ( 16)      48.9%   1015.7 (  8.1)      87.8%    134.0 (  4.4)
      75% ( 24)      49.1%   1012.3 (  3.1)      88.1%    130.3 (  2.3)
     100% ( 32)      49.5%   1004.0 (  5.3)      88.5%    125.7 (  2.1)

    Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz (Haswell, bare metal)
      2 nodes * 18 cores * 2 threads = 72 CPUs
      128G/node = 256G memory

                   kernel boot                 deferred init
                   ------------------------    ------------------------
    node% (thr)    speedup  time_ms (stdev)    speedup  time_ms (stdev)
          (  0)         --   1680.0 (  4.6)         --    627.0 (  4.0)
       3% (  1)       0.3%   1675.7 (  4.5)      -0.2%    628.0 (  3.6)
      11% (  4)      25.6%   1250.7 (  2.1)      67.9%    201.0 (  0.0)
      25% (  9)      30.7%   1164.0 ( 17.3)      81.8%    114.3 ( 17.7)
      36% ( 13)      31.4%   1152.7 ( 10.8)      84.0%    100.3 ( 17.9)
      50% ( 18)      31.5%   1150.7 (  9.3)      83.9%    101.0 ( 14.1)
      75% ( 27)      31.7%   1148.0 (  5.6)      84.5%     97.3 (  6.4)
     100% ( 36)      32.0%   1142.3 (  4.0)      85.6%     90.0 (  1.0)

    AMD EPYC 7551 32-Core Processor (Zen, kvm guest)
      1 node * 8 cores * 2 threads = 16 CPUs
      64G/node = 64G memory

                   kernel boot                 deferred init
                   ------------------------    ------------------------
    node% (thr)    speedup  time_ms (stdev)    speedup  time_ms (stdev)
          (  0)         --   1029.3 ( 25.1)         --    240.7 (  1.5)
       6% (  1)      -0.6%   1036.0 (  7.8)      -2.2%    246.0 (  0.0)
      12% (  2)      11.8%    907.7 (  8.6)      44.7%    133.0 (  1.0)
      25% (  4)      13.9%    886.0 ( 10.6)      62.6%     90.0 (  6.0)
      38% (  6)      17.8%    845.7 ( 14.2)      69.1%     74.3 (  3.8)
      50% (  8)      16.8%    856.0 ( 22.1)      72.9%     65.3 (  5.7)
      75% ( 12)      15.4%    871.0 ( 29.2)      79.8%     48.7 (  7.4)
     100% ( 16)      21.0%    813.7 ( 21.0)      80.5%     47.0 (  5.2)

Server-oriented distros that enable deferred page init sometimes run in
small VMs, and they still benefit even though the fraction of boot time
saved is smaller:

    AMD EPYC 7551 32-Core Processor (Zen, kvm guest)
      1 node * 2 cores * 2 threads = 4 CPUs
      16G/node = 16G memory

                   kernel boot                 deferred init
                   ------------------------    ------------------------
    node% (thr)    speedup  time_ms (stdev)    speedup  time_ms (stdev)
          (  0)         --    716.0 ( 14.0)         --     49.7 (  0.6)
      25% (  1)       1.8%    703.0 (  5.3)      -4.0%     51.7 (  0.6)
      50% (  2)       1.6%    704.7 (  1.2)      43.0%     28.3 (  0.6)
      75% (  3)       2.7%    696.7 ( 13.1)      49.7%     25.0 (  0.0)
     100% (  4)       4.1%    687.0 ( 10.4)      55.7%     22.0 (  0.0)

    Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz (Haswell, kvm guest)
      1 node * 2 cores * 2 threads = 4 CPUs
      14G/node = 14G memory

                   kernel boot                 deferred init
                   ------------------------    ------------------------
    node% (thr)    speedup  time_ms (stdev)    speedup  time_ms (stdev)
          (  0)         --    787.7 (  6.4)         --    122.3 (  0.6)
      25% (  1)       0.2%    786.3 ( 10.8)      -2.5%    125.3 (  2.1)
      50% (  2)       5.9%    741.0 ( 13.9)      37.6%     76.3 ( 19.7)
      75% (  3)       8.3%    722.0 ( 19.0)      49.9%     61.3 (  3.2)
     100% (  4)       9.3%    714.7 (  9.5)      56.4%     53.3 (  1.5)

On Josh's 96-CPU and 192G memory system:

    Without this patch series:
    [    0.487132] node 0 initialised, 23398907 pages in 292ms
    [    0.499132] node 1 initialised, 24189223 pages in 304ms
    ...
    [    0.629376] Run /sbin/init as init process

    With this patch series:
    [    0.231435] node 1 initialised, 24189223 pages in 32ms
    [    0.236718] node 0 initialised, 23398907 pages in 36ms

[1] https://static.sched.com/hosted_files/kvmforum2019/66/VMM-fast-restart_kvmforum2019.pdf

Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Link: http://lkml.kernel.org/r/20200527173608.2885243-7-daniel.m.jordan@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Deferred page init used to report the number of pages initialized:

  node 0 initialised, 32439114 pages in 97ms

Tracking this makes the code more complicated when using multiple threads.
Given that the statistic probably has limited value, especially since a
zone grows on demand so that the page count can vary, just remove it.

The boot message now looks like

  node 0 deferred pages initialised in 97ms

Suggested-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Link: http://lkml.kernel.org/r/20200527173608.2885243-6-daniel.m.jordan@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Sometimes the kernel doesn't take full advantage of system memory
bandwidth, leading to a single CPU spending excessive time in
initialization paths where the data scales with memory size.

Multithreading naturally addresses this problem.

Extend padata, a framework that handles many parallel yet singlethreaded
jobs, to also handle multithreaded jobs by adding support for splitting up
the work evenly, specifying a minimum amount of work that's appropriate
for one helper thread to do, load balancing between helpers, and
coordinating them.

This is inspired by work from Pavel Tatashin and Steve Sistare.

Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Josh Triplett <josh@joshtriplett.org>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Link: http://lkml.kernel.org/r/20200527173608.2885243-5-daniel.m.jordan@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

padata allocates per-CPU, per-instance work structs for parallel jobs.  A
do_parallel call assigns a job to a sequence number and hashes the number
to a CPU, where the job will eventually run using the corresponding work.

This approach fit with how padata used to bind a job to each CPU
round-robin, makes less sense after commit bfde23ce

 ("padata: unbind
parallel jobs from specific CPUs") because a work isn't bound to a
particular CPU anymore, and isn't needed at all for multithreaded jobs
because they don't have sequence numbers.

Replace the per-CPU works with a preallocated pool, which allows sharing
them between existing padata users and the upcoming multithreaded user.
The pool will also facilitate setting NUMA-aware concurrency limits with
later users.

The pool is sized according to the number of possible CPUs.  With this
limit, MAX_OBJ_NUM no longer makes sense, so remove it.

If the global pool is exhausted, a parallel job is run in the current task
instead to throttle a system trying to do too much in parallel.

Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Josh Triplett <josh@joshtriplett.org>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Link: http://lkml.kernel.org/r/20200527173608.2885243-4-daniel.m.jordan@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

padata will soon initialize the system's struct pages in parallel, so it
needs to be ready by page_alloc_init_late().

The error return from padata_driver_init() triggers an initcall warning,
so add a warning to padata_init() to avoid silent failure.

Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Josh Triplett <josh@joshtriplett.org>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Link: http://lkml.kernel.org/r/20200527173608.2885243-3-daniel.m.jordan@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "padata: parallelize deferred page init", v3.

Deferred struct page init is a bottleneck in kernel boot--the biggest for
us and probably others.  Optimizing it maximizes availability for
large-memory systems and allows spinning up short-lived VMs as needed
without having to leave them running.  It also benefits bare metal
machines hosting VMs that are sensitive to downtime.  In projects such as
VMM Fast Restart[1], where guest state is preserved across kexec reboot,
it helps prevent application and network timeouts in the guests.

So, multithread deferred init to take full advantage of system memory
bandwidth.

Extend padata, a framework that handles many parallel singlethreaded jobs,
to handle multithreaded jobs as well by adding support for splitting up
the work evenly, specifying a minimum amount of work that's appropriate
for one helper thread to do, load balancing between helpers, and
coordinating them.  More documentation in patches 4 and 8.

This series is the first step in a project to address other memory
proportional bottlenecks in the kernel such as pmem struct page init, vfio
page pinning, hugetlb fallocate, and munmap.  Deferred page init doesn't
require concurrency limits, resource control, or priority adjustments like
these other users will because it happens during boot when the system is
otherwise idle and waiting for page init to finish.

This has been run on a variety of x86 systems and speeds up kernel boot by
4% to 49%, saving up to 1.6 out of 4 seconds.  Patch 6 has more numbers.

This patch (of 8):

padata_driver_exit() is unnecessary because padata isn't built as a module
and doesn't exit.

padata's init routine will soon allocate memory, so getting rid of the
exit function now avoids pointless code to free it.

Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Josh Triplett <josh@joshtriplett.org>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Robert Elliott <elliott@hpe.com>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Link: http://lkml.kernel.org/r/20200527173608.2885243-1-daniel.m.jordan@oracle.com
Link: http://lkml.kernel.org/r/20200527173608.2885243-2-daniel.m.jordan@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that deferred pages are initialized with interrupts enabled we can
replace touch_nmi_watchdog() with cond_resched(), as it was before
3a2d7fa8.

For now, we cannot do the same in deferred_grow_zone() as it is still
initializes pages with interrupts disabled.

This change fixes RCU problem described in
https://lkml.kernel.org/r/20200401104156.11564-2-david@redhat.com

[   60.474005] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[   60.475000] rcu:  1-...0: (0 ticks this GP) idle=02a/1/0x4000000000000000 softirq=1/1 fqs=15000
[   60.475000] rcu:  (detected by 0, t=60002 jiffies, g=-1199, q=1)
[   60.475000] Sending NMI from CPU 0 to CPUs 1:
[    1.760091] NMI backtrace for cpu 1
[    1.760091] CPU: 1 PID: 20 Comm: pgdatinit0 Not tainted 4.18.0-147.9.1.el8_1.x86_64 #1
[    1.760091] Hardware name: Red Hat KVM, BIOS 1.13.0-1.module+el8.2.0+5520+4e5817f3 04/01/2014
[    1.760091] RIP: 0010:__init_single_page.isra.65+0x10/0x4f
[    1.760091] Code: 48 83 cf 63 48 89 f8 0f 1f 40 00 48 89 c6 48 89 d7 e8 6b 18 80 ff 66 90 5b c3 31 c0 b9 10 00 00 00 49 89 f8 48 c1 e6 33 f3 ab <b8> 07 00 00 00 48 c1 e2 36 41 c7 40 34 01 00 00 00 48 c1 e0 33 41
[    1.760091] RSP: 0000:ffffba783123be40 EFLAGS: 00000006
[    1.760091] RAX: 0000000000000000 RBX: fffffad34405e300 RCX: 0000000000000000
[    1.760091] RDX: 0000000000000000 RSI: 0010000000000000 RDI: fffffad34405e340
[    1.760091] RBP: 0000000033f3177e R08: fffffad34405e300 R09: 0000000000000002
[    1.760091] R10: 000000000000002b R11: ffff98afb691a500 R12: 0000000000000002
[    1.760091] R13: 0000000000000000 R14: 000000003f03ea00 R15: 000000003e10178c
[    1.760091] FS:  0000000000000000(0000) GS:ffff9c9ebeb00000(0000) knlGS:0000000000000000
[    1.760091] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    1.760091] CR2: 00000000ffffffff CR3: 000000a1cf20a001 CR4: 00000000003606e0
[    1.760091] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    1.760091] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    1.760091] Call Trace:
[    1.760091]  deferred_init_pages+0x8f/0xbf
[    1.760091]  deferred_init_memmap+0x184/0x29d
[    1.760091]  ? deferred_free_pages.isra.97+0xba/0xba
[    1.760091]  kthread+0x112/0x130
[    1.760091]  ? kthread_flush_work_fn+0x10/0x10
[    1.760091]  ret_from_fork+0x35/0x40
[   89.123011] node 0 initialised, 1055935372 pages in 88650ms

Fixes: 3a2d7fa8

 ("mm: disable interrupts while initializing deferred pages")
Reported-by: Yiqian Wei <yiwei@redhat.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>	[4.17+]
Link: http://lkml.kernel.org/r/20200403140952.17177-4-pasha.tatashin@soleen.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Initializing struct pages is a long task and keeping interrupts disabled
for the duration of this operation introduces a number of problems.

1. jiffies are not updated for long period of time, and thus incorrect time
   is reported. See proposed solution and discussion here:
   lkml/20200311123848.118638-1-shile.zhang@linux.alibaba.com
2. It prevents farther improving deferred page initialization by allowing
   intra-node multi-threading.

We are keeping interrupts disabled to solve a rather theoretical problem
that was never observed in real world (See 3a2d7fa8).

Let's keep interrupts enabled. In case we ever encounter a scenario where
an interrupt thread wants to allocate large amount of memory this early in
boot we can deal with that by growing zone (see deferred_grow_zone()) by
the needed amount before starting deferred_init_memmap() threads.

Before:
[    1.232459] node 0 initialised, 12058412 pages in 1ms

After:
[    1.632580] node 0 initialised, 12051227 pages in 436ms

Fixes: 3a2d7fa8

 ("mm: disable interrupts while initializing deferred pages")
Reported-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Yiqian Wei <yiwei@redhat.com>
Cc: <stable@vger.kernel.org>	[4.17+]
Link: http://lkml.kernel.org/r/20200403140952.17177-3-pasha.tatashin@soleen.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "initialize deferred pages with interrupts enabled", v4.

Keep interrupts enabled during deferred page initialization in order to
make code more modular and allow jiffies to update.

Original approach, and discussion can be found here:
 http://lkml.kernel.org/r/20200311123848.118638-1-shile.zhang@linux.alibaba.com

This patch (of 3):

deferred_init_memmap() disables interrupts the entire time, so it calls
touch_nmi_watchdog() periodically to avoid soft lockup splats.  Soon it
will run with interrupts enabled, at which point cond_resched() should be
used instead.

deferred_grow_zone() makes the same watchdog calls through code shared
with deferred init but will continue to run with interrupts disabled, so
it can't call cond_resched().

Pull the watchdog calls up to these two places to allow the first to be
changed later, independently of the second.  The frequency reduces from
twice per pageblock (init and free) to once per max order block.

Fixes: 3a2d7fa8

 ("mm: disable interrupts while initializing deferred pages")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Shile Zhang <shile.zhang@linux.alibaba.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: James Morris <jmorris@namei.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Yiqian Wei <yiwei@redhat.com>
Cc: <stable@vger.kernel.org>	[4.17+]
Link: http://lkml.kernel.org/r/20200403140952.17177-2-pasha.tatashin@soleen.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Restrict elements in compound_page_dtors[] array per NR_COMPOUND_DTORS and
explicitly position them according to enum compound_dtor_id.  This
improves protection against possible misalignment between
compound_page_dtors[] and enum compound_dtor_id later on.

Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: http://lkml.kernel.org/r/1589795958-19317-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Updating the zone watermarks by any means, like min_free_kbytes,
water_mark_scale_factor etc, when ->watermark_boost is set will result in
higher low and high watermarks than the user asked.

Below are the steps to reproduce the problem on system setup of Android
kernel running on Snapdragon hardware.

1) Default settings of the system are as below:

   #cat /proc/sys/vm/min_free_kbytes = 5162
   #cat /proc/zoneinfo | grep -e boost -e low -e "high " -e min -e Node
	Node 0, zone   Normal
		min      797
		low      8340
		high     8539

2) Monitor the zone->watermark_boost(by adding a debug print in the
   kernel) and whenever it is greater than zero value, write the same
   value of min_free_kbytes obtained from step 1.

   #echo 5162 > /proc/sys/vm/min_free_kbytes

3) Then read the zone watermarks in the system while the
   ->watermark_boost is zero.  This should show the same values of
   watermarks as step 1 but shown a higher values than asked.

   #cat /proc/zoneinfo | grep -e boost -e low -e "high " -e min -e Node
	Node 0, zone   Normal
		min      797
		low      21148
		high     21347

These higher values are because of updating the zone watermarks using the
macro min_wmark_pages(zone) which also adds the zone->watermark_boost.

	#define min_wmark_pages(z) (z->_watermark[WMARK_MIN] +
					z->watermark_boost)

So the steps that lead to the issue are:

1) On the extfrag event, watermarks are boosted by storing the required
   value in ->watermark_boost.

2) User tries to update the zone watermarks level in the system through
   min_free_kbytes or watermark_scale_factor.

3) Later, when kswapd woke up, it resets the zone->watermark_boost to
   zero.

In step 2), we use the min_wmark_pages() macro to store the watermarks
in the zone structure thus the values are always offsetted by
->watermark_boost value. This can be avoided by resetting the
->watermark_boost to zero before it is used.

Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Link: http://lkml.kernel.org/r/1589457511-4255-1-git-send-email-charante@codeaurora.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Initially, the per-cpu pagesets of each zone are set to the boot pagesets.
The real pagesets are allocated later but before that happens, page
allocations do occur and the numa stats for the boot pagesets get
incremented since they are common to all zones at that point.

The real pagesets, however, are allocated for the populated zones only.
Unpopulated zones, like those associated with memory-less nodes, continue
using the boot pageset and end up skewing the numa stats of the
corresponding node.

E.g.

  $ numactl -H
  available: 2 nodes (0-1)
  node 0 cpus: 0 1 2 3
  node 0 size: 0 MB
  node 0 free: 0 MB
  node 1 cpus: 4 5 6 7
  node 1 size: 8131 MB
  node 1 free: 6980 MB
  node distances:
  node   0   1
    0:  10  40
    1:  40  10

  $ numastat
                             node0           node1
  numa_hit                     108           56495
  numa_miss                      0               0
  numa_foreign                   0               0
  interleave_hit                 0            4537
  local_node                   108           31547
  other_node                     0           24948

Hence, the boot pageset stats need to be cleared after the real pagesets
are allocated.

After this point, the stats of the boot pagesets do not change as page
allocations requested for a memory-less node will either fail (if
__GFP_THISNODE is used) or get fulfilled by a preferred zone of a
different node based on the fallback zonelist.

[sandipan@linux.ibm.com: v3]
  Link: http://lkml.kernel.org/r/20200511170356.162531-1-sandipan@linux.ibm.com
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Link: http://lkml.kernel.org/r/9c9c2d1b15e37f6e6bf32f99e3100035e90c4ac9.1588868430.git.sandipan@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pageblock migrate type is encoded in GFP flags, just as zone_type and
zonelist.

Currently we use gfp_zone() and gfp_zonelist() to extract related
information, it would be proper to use the same naming convention for
migrate type.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Link: http://lkml.kernel.org/r/20200329080823.7735-1-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Slightly simplify the code by initializing user_mask with NODE_MASK_NONE,
instead of later calling nodes_clear().  This saves a line of code.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Link: http://lkml.kernel.org/r/20200330220840.21228-1-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

classzone_idx is just different name for high_zoneidx now.  So, integrate
them and add some comment to struct alloc_context in order to reduce
future confusion about the meaning of this variable.

The accessor, ac_classzone_idx() is also removed since it isn't needed
after integration.

In addition to integration, this patch also renames high_zoneidx to
highest_zoneidx since it represents more precise meaning.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ye Xiaolong <xiaolong.ye@intel.com>
Link: http://lkml.kernel.org/r/1587095923-7515-3-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "integrate classzone_idx and high_zoneidx", v5.

This patchset is followup of the problem reported and discussed two years
ago [1, 2].  The problem this patchset solves is related to the
classzone_idx on the NUMA system.  It causes a problem when the lowmem
reserve protection exists for some zones on a node that do not exist on
other nodes.

This problem was reported two years ago, and, at that time, the solution
got general agreements [2].  But it was not upstreamed.

[1]: http://lkml.kernel.org/r/20180102063528.GG30397@yexl-desktop
[2]: http://lkml.kernel.org/r/1525408246-14768-1-git-send-email-iamjoonsoo.kim@lge.com

This patch (of 2):

Currently, we use classzone_idx to calculate lowmem reserve proetection
for an allocation request.  This classzone_idx causes a problem on NUMA
systems when the lowmem reserve protection exists for some zones on a node
that do not exist on other nodes.

Before further explanation, I should first clarify how to compute the
classzone_idx and the high_zoneidx.

- ac->high_zoneidx is computed via the arcane gfp_zone(gfp_mask) and
  represents the index of the highest zone the allocation can use

- classzone_idx was supposed to be the index of the highest zone on the
  local node that the allocation can use, that is actually available in
  the system

Think about following example.  Node 0 has 4 populated zone,
DMA/DMA32/NORMAL/MOVABLE.  Node 1 has 1 populated zone, NORMAL.  Some
zones, such as MOVABLE, doesn't exist on node 1 and this makes following
difference.

Assume that there is an allocation request whose gfp_zone(gfp_mask) is the
zone, MOVABLE.  Then, it's high_zoneidx is 3.  If this allocation is
initiated on node 0, it's classzone_idx is 3 since actually
available/usable zone on local (node 0) is MOVABLE.  If this allocation is
initiated on node 1, it's classzone_idx is 2 since actually
available/usable zone on local (node 1) is NORMAL.

You can see that classzone_idx of the allocation request are different
according to their starting node, even if their high_zoneidx is the same.

Think more about these two allocation requests.  If they are processed on
local, there is no problem.  However, if allocation is initiated on node 1
are processed on remote, in this example, at the NORMAL zone on node 0,
due to memory shortage, problem occurs.  Their different classzone_idx
leads to different lowmem reserve and then different min watermark.  See
the following example.

root@ubuntu:/sys/devices/system/memory# cat /proc/zoneinfo
Node 0, zone      DMA
  per-node stats
...
  pages free     3965
        min      5
        low      8
        high     11
        spanned  4095
        present  3998
        managed  3977
        protection: (0, 2961, 4928, 5440)
...
Node 0, zone    DMA32
  pages free     757955
        min      1129
        low      1887
        high     2645
        spanned  1044480
        present  782303
        managed  758116
        protection: (0, 0, 1967, 2479)
...
Node 0, zone   Normal
  pages free     459806
        min      750
        low      1253
        high     1756
        spanned  524288
        present  524288
        managed  503620
        protection: (0, 0, 0, 4096)
...
Node 0, zone  Movable
  pages free     130759
        min      195
        low      326
        high     457
        spanned  1966079
        present  131072
        managed  131072
        protection: (0, 0, 0, 0)
...
Node 1, zone      DMA
  pages free     0
        min      0
        low      0
        high     0
        spanned  0
        present  0
        managed  0
        protection: (0, 0, 1006, 1006)
Node 1, zone    DMA32
  pages free     0
        min      0
        low      0
        high     0
        spanned  0
        present  0
        managed  0
        protection: (0, 0, 1006, 1006)
Node 1, zone   Normal
  per-node stats
...
  pages free     233277
        min      383
        low      640
        high     897
        spanned  262144
        present  262144
        managed  257744
        protection: (0, 0, 0, 0)
...
Node 1, zone  Movable
  pages free     0
        min      0
        low      0
        high     0
        spanned  262144
        present  0
        managed  0
        protection: (0, 0, 0, 0)

- static min watermark for the NORMAL zone on node 0 is 750.

- lowmem reserve for the request with classzone idx 3 at the NORMAL on
  node 0 is 4096.

- lowmem reserve for the request with classzone idx 2 at the NORMAL on
  node 0 is 0.

So, overall min watermark is:
allocation initiated on node 0 (classzone_idx 3): 750 + 4096 = 4846
allocation initiated on node 1 (classzone_idx 2): 750 + 0 = 750

Allocation initiated on node 1 will have some precedence than allocation
initiated on node 0 because min watermark of the former allocation is
lower than the other.  So, allocation initiated on node 1 could succeed on
node 0 when allocation initiated on node 0 could not, and, this could
cause too many numa_miss allocation.  Then, performance could be
downgraded.

Recently, there was a regression report about this problem on CMA patches
since CMA memory are placed in ZONE_MOVABLE by those patches.  I checked
that problem is disappeared with this fix that uses high_zoneidx for
classzone_idx.

http://lkml.kernel.org/r/20180102063528.GG30397@yexl-desktop

Using high_zoneidx for classzone_idx is more consistent way than previous
approach because system's memory layout doesn't affect anything to it.
With this patch, both classzone_idx on above example will be 3 so will
have the same min watermark.

allocation initiated on node 0: 750 + 4096 = 4846
allocation initiated on node 1: 750 + 4096 = 4846

One could wonder if there is a side effect that allocation initiated on
node 1 will use higher bar when allocation is handled on local since
classzone_idx could be higher than before.  It will not happen because the
zone without managed page doesn't contributes lowmem_reserve at all.

Reported-by: Ye Xiaolong <xiaolong.ye@intel.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Ye Xiaolong <xiaolong.ye@intel.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Link: http://lkml.kernel.org/r/1587095923-7515-1-git-send-email-iamjoonsoo.kim@lge.com
Link: http://lkml.kernel.org/r/1587095923-7515-2-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Because the lowmem reserve protection of a zone can't tell anything if the
zone is empty, except of adding one more line in /proc/zoneinfo.

Let's remove it from that zone's showing.

Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200402140113.3696-4-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When requesting memory allocation from a specific zone is not satisfied,
it will fall to lower zone to try allocating memory.  In this case, lower
zone's ->lowmem_reserve[] will help protect its own memory resource.  The
higher the relevant ->lowmem_reserve[] is, the harder the upper zone can
get memory from this lower zone.

However, this protection mechanism should be applied to populated zone,
but not an empty zone. So filling ->lowmem_reserve[] for empty zone is
not necessary, and may mislead people that it's valid data in that zone.

Node 2, zone      DMA
  pages free     0
        min      0
        low      0
        high     0
        spanned  0
        present  0
        managed  0
        protection: (0, 0, 1024, 1024)
Node 2, zone    DMA32
  pages free     0
        min      0
        low      0
        high     0
        spanned  0
        present  0
        managed  0
        protection: (0, 0, 1024, 1024)
Node 2, zone   Normal
  per-node stats
      nr_inactive_anon 0
      nr_active_anon 143
      nr_inactive_file 0
      nr_active_file 0
      nr_unevictable 0
      nr_slab_reclaimable 45
      nr_slab_unreclaimable 254

Here clear out zone->lowmem_reserve[] if zone is empty.

Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200402140113.3696-3-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "improvements about lowmem_reserve and /proc/zoneinfo", v2.

This patch (of 3):

When people write to /proc/sys/vm/lowmem_reserve_ratio to change
sysctl_lowmem_reserve_ratio[], setup_per_zone_lowmem_reserve() is called
to recalculate all ->lowmem_reserve[] for each zone of all nodes as below:

static void setup_per_zone_lowmem_reserve(void)
{
...
	for_each_online_pgdat(pgdat) {
		for (j = 0; j < MAX_NR_ZONES; j++) {
			...
			while (idx) {
				...
				if (sysctl_lowmem_reserve_ratio[idx] < 1) {
					sysctl_lowmem_reserve_ratio[idx] = 0;
					lower_zone->lowmem_reserve[j] = 0;
                                } else {
				...
			}
		}
	}
}

Meanwhile, here, sysctl_lowmem_reserve_ratio[idx] will be tuned if its
value is smaller than '1'.  As we know, sysctl_lowmem_reserve_ratio[] is
set for zone without regarding to which node it belongs to.  That means
the tuning will be done on all nodes, even though it has been done in the
first node.

And the tuning will be done too even when init_per_zone_wmark_min() calls
setup_per_zone_lowmem_reserve(), where actually nobody tries to change
sysctl_lowmem_reserve_ratio[].

So now move the tuning into lowmem_reserve_ratio_sysctl_handler(), to make
code logic more reasonable.

Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/20200402140113.3696-1-bhe@redhat.com
Link: http://lkml.kernel.org/r/20200402140113.3696-2-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since commit 397dc00e

 ("mips: sgi-ip27: switch from DISCONTIGMEM
to SPARSEMEM"), the last caller of free_bootmem_with_active_regions() was
gone.  Now no user calls it any more.

Let's remove it.

Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Link: http://lkml.kernel.org/r/20200402143455.5145-1-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently a cma area is barely used by the page allocator because it's
used only as a fallback from movable, however kswapd tries hard to make
sure that the fallback path isn't used.

This results in a system evicting memory and pushing data into swap, while
lots of CMA memory is still available.  This happens despite the fact that
alloc_contig_range is perfectly capable of moving any movable allocations
out of the way of an allocation.

To effectively use the cma area let's alter the rules: if the zone has
more free cma pages than the half of total free pages in the zone, use cma
pageblocks first and fallback to movable blocks in the case of failure.

[guro@fb.com: ifdef the cma-specific code]
  Link: http://lkml.kernel.org/r/20200311225832.GA178154@carbon.DHCP.thefacebook.com
Co-developed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Link: http://lkml.kernel.org/r/20200306150102.3e77354b@imladris.surriel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We share similar code in check_[new|free]_page_bad() to get the page's bad
reason.

Let's extract it and reduce code duplication.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Link: http://lkml.kernel.org/r/20200411220357.9636-6-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

free_pages_check() is the counterpart of check_new_page().  Rename it to
use the same naming convention.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Link: http://lkml.kernel.org/r/20200411220357.9636-5-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

free_pages_check_bad() is the counterpart of check_new_page_bad().  Rename
it to use the same naming convention.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Link: http://lkml.kernel.org/r/20200411220357.9636-4-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

After commit 5b57b8f2

 ("mm/debug.c: always print flags in
dump_page()"), page->flags is always printed for a bad page.  It is not
necessary to have bad_flags any more.

Suggested-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Link: http://lkml.kernel.org/r/20200411220357.9636-3-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "mm/page_alloc.c: cleanup on check page", v3.

This patchset does some cleanup related to check page.

1. Remove unnecessary bad_reason assignment
2. Remove bad_flags to bad_page()
3. Rename function for naming convention
4. Extract common part to check page

Thanks for suggestions from David Rientjes and Anshuman Khandual.

This patch (of 5):

Since function returns directly, bad_[reason|flags] is not used any where.
And move this to the first.

This is a following cleanup for commit e570f56c

 ("mm:
check_new_page_bad() directly returns in __PG_HWPOISON case")

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/20200411220357.9636-2-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

To reflect the updates to free_area_init() family of functions.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Hoan Tran <hoan@os.amperecomputing.com>	[arm64]
Cc: Baoquan He <bhe@redhat.com>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200412194859.12663-22-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

find_min_pfn_with_active_regions() calls find_min_pfn_for_node() with nid
parameter set to MAX_NUMNODES.  This makes the find_min_pfn_for_node()
traverse all memblock memory regions although the first PFN in the system
can be easily found with memblock_start_of_DRAM().

Use memblock_start_of_DRAM() in find_min_pfn_with_active_regions() and drop
now unused find_min_pfn_for_node().

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Hoan Tran <hoan@os.amperecomputing.com>	[arm64]
Cc: Baoquan He <bhe@redhat.com>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200412194859.12663-21-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

free_area_init_node() now always uses memblock info and the zone PFN
limits so it does not need the backwards compatibility functions to
calculate the zone spanned and absent pages.  The removal of the compat_
versions of zone_{abscent,spanned}_pages_in_node() in turn, makes
zone_size and zhole_size parameters unused.

The node_start_pfn is determined by get_pfn_range_for_nid(), so there is
no need to pass it to free_area_init_node().

As a result, the only required parameter to free_area_init_node() is the
node ID, all the rest are removed along with no longer used
compat_zone_{abscent,spanned}_pages_in_node() helpers.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Hoan Tran <hoan@os.amperecomputing.com>	[arm64]
Cc: Baoquan He <bhe@redhat.com>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200412194859.12663-20-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

free_area_init_node() is only used by x86 to initialize a memory-less
nodes.  Make its name reflect this and drop all the function parameters
except node ID as they are anyway zero.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Hoan Tran <hoan@os.amperecomputing.com>	[arm64]
Cc: Baoquan He <bhe@redhat.com>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200412194859.12663-19-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Some architectures (e.g.  ARC) have the ZONE_HIGHMEM zone below the
ZONE_NORMAL.  Allowing free_area_init() parse max_zone_pfn array even it
is sorted in descending order allows using free_area_init() on such
architectures.

Add top -> down traversal of max_zone_pfn array in free_area_init() and
use the latter in ARC node/zone initialization.

[rppt@kernel.org: ARC fix]
  Link: http://lkml.kernel.org/r/20200504153901.GM14260@kernel.org
[rppt@linux.ibm.com: arc: free_area_init(): take into account PAE40 mode]
  Link: http://lkml.kernel.org/r/20200507205900.GH683243@linux.ibm.com
[akpm@linux-foundation.org: declare arch_has_descending_max_zone_pfns()]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Hoan Tran <hoan@os.amperecomputing.com>	[arm64]
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/20200412194859.12663-18-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The memmap_init() function was made to iterate over memblock regions and
as the result the early_pfn_in_nid() function became obsolete.  Since
CONFIG_NODES_SPAN_OTHER_NODES is only used to pick a stub or a real
implementation of early_pfn_in_nid(), it is also not needed anymore.

Remove both early_pfn_in_nid() and the CONFIG_NODES_SPAN_OTHER_NODES.

Co-developed-by: Hoan Tran <Hoan@os.amperecomputing.com>
Signed-off-by: Hoan Tran <Hoan@os.amperecomputing.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Hoan Tran <hoan@os.amperecomputing.com>	[arm64]
Cc: Baoquan He <bhe@redhat.com>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200412194859.12663-17-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When called during boot the memmap_init_zone() function checks if each PFN
is valid and actually belongs to the node being initialized using
early_pfn_valid() and early_pfn_in_nid().

Each such check may cost up to O(log(n)) where n is the number of memory
banks, so for large amount of memory overall time spent in early_pfn*()
becomes substantial.

Since the information is anyway present in memblock, we can iterate over
memblock memory regions in memmap_init() and only call memmap_init_zone()
for PFN ranges that are know to be valid and in the appropriate node.

[cai@lca.pw: fix a compilation warning from Clang]
  Link: http://lkml.kernel.org/r/CF6E407F-17DC-427C-8203-21979FB882EF@lca.pw
[bhe@redhat.com: fix the incorrect hole in fast_isolate_freepages()]
  Link: http://lkml.kernel.org/r/8C537EB7-85EE-4DCF-943E-3CC0ED0DF56D@lca.pw
  Link: http://lkml.kernel.org/r/20200521014407.29690-1-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Hoan Tran <hoan@os.amperecomputing.com>	[arm64]
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Qian Cai <cai@lca.pw>
Link: http://lkml.kernel.org/r/20200412194859.12663-16-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

free_area_init() only requires the definition of maximal PFN for each of
the supported zone rater than calculation of actual zone sizes and the
sizes of the holes between the zones.

After removal of CONFIG_HAVE_MEMBLOCK_NODE_MAP the free_area_init() is
available to all architectures.

Using this function instead of free_area_init_node() simplifies the zone
detection.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Hoan Tran <hoan@os.amperecomputing.com>	[arm64]
Cc: Baoquan He <bhe@redhat.com>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200412194859.12663-15-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>