- Feb 10, 2021
-
-
Dan Williams authored
commit 7018c897 upstream. Richard reports that the following test: (while true; do cat /sys/bus/nd/devices/nmem*/available_slots 2>&1 > /dev/null done) & while true; do for i in $(seq 0 4); do echo nmem$i > /sys/bus/nd/drivers/nvdimm/bind done for i in $(seq 0 4); do echo nmem$i > /sys/bus/nd/drivers/nvdimm/unbind done done ...fails with a crash signature like: divide error: 0000 [#1] SMP KASAN PTI RIP: 0010:nd_label_nfree+0x134/0x1a0 [libnvdimm] [..] Call Trace: available_slots_show+0x4e/0x120 [libnvdimm] dev_attr_show+0x42/0x80 ? memset+0x20/0x40 sysfs_kf_seq_show+0x218/0x410 The root cause is that available_slots_show() consults driver-data, but fails to synchronize against device-unbind setting up a TOCTOU race to access uninitialized memory. Validate driver-data under the device-lock. Fixes: 4d88a97a ("libnvdimm, nvdimm: dimm driver and base libnvdimm device-driver infrastructure") Cc: <stable@vger.kernel.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Coly Li <colyli@suse.com> Reported-by:
Richard Palethorpe <rpalethorpe@suse.com> Acked-by:
Richard Palethorpe <rpalethorpe@suse.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Williams authored
commit 13f445d6 upstream. Legacy pmem namespaces lost support for the "resource" attribute when the code was cleaned up to put the permission visibility in the declaration. Restore this by listing 'resource' in the default attributes. A new ndctl regression test for pfn_to_online_page() corner cases builds on this fix. Fixes: bfd2e914 ("libnvdimm: Simplify root read-only definition for the 'resource' attribute") Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/161052334995.1805594.12054873528154362921.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexey Kardashevskiy authored
commit c8b186a8 upstream. When executing a tracepoint, the tracepoint's func is dereferenced twice - in __DO_TRACE() (where the returned pointer is checked) and later on in __traceiter_##_name where the returned pointer is dereferenced without checking which leads to races against tracepoint_removal_sync() and crashes. This adds a check before referencing the pointer in tracepoint_ptr_deref. Link: https://lkml.kernel.org/r/20210202072326.120557-1-aik@ozlabs.ru Cc: stable@vger.kernel.org Fixes: d25e37d8 ("tracepoint: Optimize using static_call()") Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Viktor Rosendahl authored
commit da7f84cd upstream. Eaerlier, tracing was disabled when reading the trace file. This behavior was changed with: commit 06e0a548 ("tracing: Do not disable tracing when reading the trace file"). This doesn't seem to work with the latency tracers. The above mentioned commit dit not only change the behavior but also added an option to emulate the old behavior. The idea with this patch is to enable this pause-on-trace option when the latency tracers are used. Link: https://lkml.kernel.org/r/20210119164344.37500-2-Viktor.Rosendahl@bmw.de Cc: stable@vger.kernel.org Fixes: 06e0a548 ("tracing: Do not disable tracing when reading the trace file") Signed-off-by:
Viktor Rosendahl <Viktor.Rosendahl@bmw.de> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wang ShaoBo authored
commit 0188b878 upstream. Our system encountered a re-init error when re-registering same kretprobe, where the kretprobe_instance in rp->free_instances is illegally accessed after re-init. Implementation to avoid re-registration has been introduced for kprobe before, but lags for register_kretprobe(). We must check if kprobe has been re-registered before re-initializing kretprobe, otherwise it will destroy the data struct of kretprobe registered, which can lead to memory leak, system crash, also some unexpected behaviors. We use check_kprobe_rereg() to check if kprobe has been re-registered before running register_kretprobe()'s body, for giving a warning message and terminate registration process. Link: https://lkml.kernel.org/r/20210128124427.2031088-1-bobo.shaobowang@huawei.com Cc: stable@vger.kernel.org Fixes: 1f0ab409 ("kprobes: Prevent re-registration of the same kprobe") [ The above commit should have been done for kretprobes too ] Acked-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
Ananth N Mavinakayanahalli <ananth@linux.ibm.com> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Wang ShaoBo <bobo.shaobowang@huawei.com> Signed-off-by:
Cheng Jian <cj.chengjian@huawei.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masami Hiramatsu authored
commit 97c753e6 upstream. Fix kprobe_on_func_entry() returns error code instead of false so that register_kretprobe() can return an appropriate error code. append_trace_kprobe() expects the kprobe registration returns -ENOENT when the target symbol is not found, and it checks whether the target module is unloaded or not. If the target module doesn't exist, it defers to probe the target symbol until the module is loaded. However, since register_kretprobe() returns -EINVAL instead of -ENOENT in that case, it always fail on putting the kretprobe event on unloaded modules. e.g. Kprobe event: /sys/kernel/debug/tracing # echo p xfs:xfs_end_io >> kprobe_events [ 16.515574] trace_kprobe: This probe might be able to register after target module is loaded. Continue. Kretprobe event: (p -> r) /sys/kernel/debug/tracing # echo r xfs:xfs_end_io >> kprobe_events sh: write error: Invalid argument /sys/kernel/debug/tracing # cat error_log [ 41.122514] trace_kprobe: error: Failed to register probe event Command: r xfs:xfs_end_io ^ To fix this bug, change kprobe_on_func_entry() to detect symbol lookup failure and return -ENOENT in that case. Otherwise it returns -EINVAL or 0 (succeeded, given address is on the entry). Link: https://lkml.kernel.org/r/161176187132.1067016.8118042342894378981.stgit@devnote2 Cc: stable@vger.kernel.org Fixes: 59158ec4 ("tracing/kprobes: Check the probe on unloaded module correctly") Reported-by:
Jianlin Lv <Jianlin.Lv@arm.com> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (VMware) authored
commit 7e0a9220 upstream. On some archs, the idle task can call into cpu_suspend(). The cpu_suspend() will disable or pause function graph tracing, as there's some paths in bringing down the CPU that can have issues with its return address being modified. The task_struct structure has a "tracing_graph_pause" atomic counter, that when set to something other than zero, the function graph tracer will not modify the return address. The problem is that the tracing_graph_pause counter is initialized when the function graph tracer is enabled. This can corrupt the counter for the idle task if it is suspended in these architectures. CPU 1 CPU 2 ----- ----- do_idle() cpu_suspend() pause_graph_tracing() task_struct->tracing_graph_pause++ (0 -> 1) start_graph_tracing() for_each_online_cpu(cpu) { ftrace_graph_init_idle_task(cpu) task-struct->tracing_graph_pause = 0 (1 -> 0) unpause_graph_tracing() task_struct->tracing_graph_pause-- (0 -> -1) The above should have gone from 1 to zero, and enabled function graph tracing again. But instead, it is set to -1, which keeps it disabled. There's no reason that the field tracing_graph_pause on the task_struct can not be initialized at boot up. Cc: stable@vger.kernel.org Fixes: 380c4b14 ("tracing/function-graph-tracer: append the tracing_graph_flag") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211339 Reported-by:
<pierre.gondois@arm.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Quanyang Wang authored
commit c351bb64 upstream. In gpiochip_add_data_with_key, we should check the return value of dev_set_name to ensure that device name is allocated successfully and then add a label on the error path to free device name to fix kmemleak as below: unreferenced object 0xc2d6fc40 (size 64): comm "kworker/0:1", pid 16, jiffies 4294937425 (age 65.120s) hex dump (first 32 bytes): 67 70 69 6f 63 68 69 70 30 00 1a c0 54 63 1a c0 gpiochip0...Tc.. 0c ed 84 c0 48 ed 84 c0 3c ee 84 c0 10 00 00 00 ....H...<....... backtrace: [<962810f7>] kobject_set_name_vargs+0x2c/0xa0 [<f50797e6>] dev_set_name+0x2c/0x5c [<94abbca9>] gpiochip_add_data_with_key+0xfc/0xce8 [<5c4193e0>] omap_gpio_probe+0x33c/0x68c [<3402f137>] platform_probe+0x58/0xb8 [<7421e210>] really_probe+0xec/0x3b4 [<000f8ada>] driver_probe_device+0x58/0xb4 [<67e0f7f7>] bus_for_each_drv+0x80/0xd0 [<4de545dc>] __device_attach+0xe8/0x15c [<2e4431e7>] bus_probe_device+0x84/0x8c [<c18b1de9>] device_add+0x384/0x7c0 [<5aff2995>] of_platform_device_create_pdata+0x8c/0xb8 [<061c3483>] of_platform_bus_create+0x198/0x230 [<5ee6d42a>] of_platform_populate+0x60/0xb8 [<2647300f>] sysc_probe+0xd18/0x135c [<3402f137>] platform_probe+0x58/0xb8 Signed-off-by:
Quanyang Wang <quanyang.wang@windriver.com> Cc: stable@vger.kernel.org Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Felix Fietkau authored
commit 18fe0fae upstream. If the driver uses .sta_add, station entries are only uploaded after the sta is in assoc state. Fix early station rate table updates by deferring them until the sta has been uploaded. Cc: stable@vger.kernel.org Signed-off-by:
Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210201083324.3134-1-nbd@nbd.name [use rcu_access_pointer() instead since we won't dereference here] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sargun Dhillon authored
commit 335d3fc5 upstream. Overlayfs's volatile option allows the user to bypass all forced sync calls to the upperdir filesystem. This comes at the cost of safety. We can never ensure that the user's data is intact, but we can make a best effort to expose whether or not the data is likely to be in a bad state. The best way to handle this in the time being is that if an overlayfs's upperdir experiences an error after a volatile mount occurs, that error will be returned on fsync, fdatasync, sync, and syncfs. This is contradictory to the traditional behaviour of VFS which fails the call once, and only raises an error if a subsequent fsync error has occurred, and been raised by the filesystem. One awkward aspect of the patch is that we have to manually set the superblock's errseq_t after the sync_fs callback as opposed to just returning an error from syncfs. This is because the call chain looks something like this: sys_syncfs -> sync_filesystem -> __sync_filesystem -> /* The return value is ignored here sb->s_op->sync_fs(sb) _sync_blockdev /* Where the VFS fetches the error to raise to userspace */ errseq_check_and_advance Because of this we call errseq_set every time the sync_fs callback occurs. Due to the nature of this seen / unseen dichotomy, if the upperdir is an inconsistent state at the initial mount time, overlayfs will refuse to mount, as overlayfs cannot get a snapshot of the upperdir's errseq that will increment on error until the user calls syncfs. Signed-off-by:
Sargun Dhillon <sargun@sargun.me> Suggested-by:
Amir Goldstein <amir73il@gmail.com> Reviewed-by:
Amir Goldstein <amir73il@gmail.com> Fixes: c86243b0 ("ovl: provide a mount option "volatile"") Cc: stable@vger.kernel.org Reviewed-by:
Vivek Goyal <vgoyal@redhat.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miklos Szeredi authored
commit b854cc65 upstream. The function ovl_dir_real_file() currently uses the inode lock to serialize writes to the od->upperfile field. However, this function will get called by ovl_ioctl_set_flags(), which utilizes the inode lock too. In this case ovl_dir_real_file() will try to claim a lock that is owned by a function in its call stack, which won't get released before ovl_dir_real_file() returns. Fix by replacing the open coded compare and exchange by an explicit atomic op. Fixes: 61536bed ("ovl: support [S|G]ETFLAGS and FS[S|G]ETXATTR ioctls for directories") Cc: stable@vger.kernel.org # v5.10 Reported-by:
Icenowy Zheng <icenowy@aosc.io> Tested-by:
Icenowy Zheng <icenowy@aosc.io> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Liangyan authored
commit e04527fe upstream. We need to lock d_parent->d_lock before dget_dlock, or this may have d_lockref updated parallelly like calltrace below which will cause dentry->d_lockref leak and risk a crash. CPU 0 CPU 1 ovl_set_redirect lookup_fast ovl_get_redirect __d_lookup dget_dlock //no lock protection here spin_lock(&dentry->d_lock) dentry->d_lockref.count++ dentry->d_lockref.count++ [ 49.799059] PGD 800000061fed7067 P4D 800000061fed7067 PUD 61fec5067 PMD 0 [ 49.799689] Oops: 0002 [#1] SMP PTI [ 49.800019] CPU: 2 PID: 2332 Comm: node Not tainted 4.19.24-7.20.al7.x86_64 #1 [ 49.800678] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8a46cfe 04/01/2014 [ 49.801380] RIP: 0010:_raw_spin_lock+0xc/0x20 [ 49.803470] RSP: 0018:ffffac6fc5417e98 EFLAGS: 00010246 [ 49.803949] RAX: 0000000000000000 RBX: ffff93b8da3446c0 RCX: 0000000a00000000 [ 49.804600] RDX: 0000000000000001 RSI: 000000000000000a RDI: 0000000000000088 [ 49.805252] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff993cf040 [ 49.805898] R10: ffff93b92292e580 R11: ffffd27f188a4b80 R12: 0000000000000000 [ 49.806548] R13: 00000000ffffff9c R14: 00000000fffffffe R15: ffff93b8da3446c0 [ 49.807200] FS: 00007ffbedffb700(0000) GS:ffff93b927880000(0000) knlGS:0000000000000000 [ 49.807935] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 49.808461] CR2: 0000000000000088 CR3: 00000005e3f74006 CR4: 00000000003606a0 [ 49.809113] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 49.809758] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 49.810410] Call Trace: [ 49.810653] d_delete+0x2c/0xb0 [ 49.810951] vfs_rmdir+0xfd/0x120 [ 49.811264] do_rmdir+0x14f/0x1a0 [ 49.811573] do_syscall_64+0x5b/0x190 [ 49.811917] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 49.812385] RIP: 0033:0x7ffbf505ffd7 [ 49.814404] RSP: 002b:00007ffbedffada8 EFLAGS: 00000297 ORIG_RAX: 0000000000000054 [ 49.815098] RAX: ffffffffffffffda RBX: 00007ffbedffb640 RCX: 00007ffbf505ffd7 [ 49.815744] RDX: 0000000004449700 RSI: 0000000000000000 RDI: 0000000006c8cd50 [ 49.816394] RBP: 00007ffbedffaea0 R08: 0000000000000000 R09: 0000000000017d0b [ 49.817038] R10: 0000000000000000 R11: 0000000000000297 R12: 0000000000000012 [ 49.817687] R13: 00000000072823d8 R14: 00007ffbedffb700 R15: 00000000072823d8 [ 49.818338] Modules linked in: pvpanic cirrusfb button qemu_fw_cfg atkbd libps2 i8042 [ 49.819052] CR2: 0000000000000088 [ 49.819368] ---[ end trace 4e652b8aa299aa2d ]--- [ 49.819796] RIP: 0010:_raw_spin_lock+0xc/0x20 [ 49.821880] RSP: 0018:ffffac6fc5417e98 EFLAGS: 00010246 [ 49.822363] RAX: 0000000000000000 RBX: ffff93b8da3446c0 RCX: 0000000a00000000 [ 49.823008] RDX: 0000000000000001 RSI: 000000000000000a RDI: 0000000000000088 [ 49.823658] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff993cf040 [ 49.825404] R10: ffff93b92292e580 R11: ffffd27f188a4b80 R12: 0000000000000000 [ 49.827147] R13: 00000000ffffff9c R14: 00000000fffffffe R15: ffff93b8da3446c0 [ 49.828890] FS: 00007ffbedffb700(0000) GS:ffff93b927880000(0000) knlGS:0000000000000000 [ 49.830725] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 49.832359] CR2: 0000000000000088 CR3: 00000005e3f74006 CR4: 00000000003606a0 [ 49.834085] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 49.835792] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Cc: <stable@vger.kernel.org> Fixes: a6c60655 ("ovl: redirect on rename-dir") Signed-off-by:
Liangyan <liangyan.peng@linux.alibaba.com> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Suggested-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mario Limonciello authored
commit 4d395c5e upstream. When we walk up the device hierarchy in tb_acpi_add_link() make sure we break the loop if the device has no parent. Otherwise we may crash the kernel by dereferencing a NULL pointer. Fixes: b2be2b05 ("thunderbolt: Create device links from ACPI description") Cc: stable@vger.kernel.org Signed-off-by:
Mario Limonciello <mario.limonciello@dell.com> Acked-by:
Yehezkel Bernat <YehezkelShB@gmail.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masahiro Yamada authored
[ Upstream commit 315da87c ] Sedat Dilek noticed duplicated flags in DEBUG_CFLAGS when building deb-pkg with CONFIG_DEBUG_INFO. For example, 'make CC=clang bindeb-pkg' reproduces the issue. Kbuild recurses to the top Makefile for some targets such as package builds. With commit 121c5d08 ("kbuild: Only add -fno-var-tracking-assignments for old GCC versions") applied, DEBUG_CFLAGS is now reset only when CONFIG_CC_IS_GCC=y. Fix it to reset DEBUG_CFLAGS all the time. Fixes: 121c5d08 ("kbuild: Only add -fno-var-tracking-assignments for old GCC versions") Reported-by:
Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Tested-by:
Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by:
Mark Wielaard <mark@klomp.org> Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Roman Gushchin authored
[ Upstream commit 2dcb3964 ] With kaslr the kernel image is placed at a random place, so starting the bottom-up allocation with the kernel_end can result in an allocation failure and a warning like this one: hugetlb_cma: reserve 2048 MiB, up to 2048 MiB per node ------------[ cut here ]------------ memblock: bottom-up allocation failed, memory hotremove may be affected WARNING: CPU: 0 PID: 0 at mm/memblock.c:332 memblock_find_in_range_node+0x178/0x25a Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.0+ #1169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 RIP: 0010:memblock_find_in_range_node+0x178/0x25a Code: e9 6d ff ff ff 48 85 c0 0f 85 da 00 00 00 80 3d 9b 35 df 00 00 75 15 48 c7 c7 c0 75 59 88 c6 05 8b 35 df 00 01 e8 25 8a fa ff <0f> 0b 48 c7 44 24 20 ff ff ff ff 44 89 e6 44 89 ea 48 c7 c1 70 5c RSP: 0000:ffffffff88803d18 EFLAGS: 00010086 ORIG_RAX: 0000000000000000 RAX: 0000000000000000 RBX: 0000000240000000 RCX: 00000000ffffdfff RDX: 00000000ffffdfff RSI: 00000000ffffffea RDI: 0000000000000046 RBP: 0000000100000000 R08: ffffffff88922788 R09: 0000000000009ffb R10: 00000000ffffe000 R11: 3fffffffffffffff R12: 0000000000000000 R13: 0000000000000000 R14: 0000000080000000 R15: 00000001fb42c000 FS: 0000000000000000(0000) GS:ffffffff88f71000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa080fb401000 CR3: 00000001fa80a000 CR4: 00000000000406b0 Call Trace: memblock_alloc_range_nid+0x8d/0x11e cma_declare_contiguous_nid+0x2c4/0x38c hugetlb_cma_reserve+0xdc/0x128 flush_tlb_one_kernel+0xc/0x20 native_set_fixmap+0x82/0xd0 flat_get_apic_id+0x5/0x10 register_lapic_address+0x8e/0x97 setup_arch+0x8a5/0xc3f start_kernel+0x66/0x547 load_ucode_bsp+0x4c/0xcd secondary_startup_64_no_verify+0xb0/0xbb random: get_random_bytes called from __warn+0xab/0x110 with crng_init=0 ---[ end trace f151227d0b39be70 ]--- At the same time, the kernel image is protected with memblock_reserve(), so we can just start searching at PAGE_SIZE. In this case the bottom-up allocation has the same chances to success as a top-down allocation, so there is no reason to fallback in the case of a failure. All together it simplifies the logic. Link: https://lkml.kernel.org/r/20201217201214.3414100-2-guro@fb.com Fixes: 8fabc623 ("powerpc: Ensure that swiotlb buffer is allocated from low memory") Signed-off-by:
Roman Gushchin <guro@fb.com> Reviewed-by:
Mike Rapoport <rppt@linux.ibm.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Rik van Riel <riel@surriel.com> Cc: Wonhyuk Yang <vvghjk1234@gmail.com> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eli Cohen authored
[ Upstream commit b35ccebe ] When a change of memory map occurs, the hardware resources are destroyed and then re-created again with the new memory map. In such case, we need to restore the hardware available and used indices. The driver failed to restore the used index which is added here. Also, since the driver also fails to reset the available and used indices upon device reset, fix this here to avoid regression caused by the fact that used index may not be zero upon device reset. Fixes: 1a86b377 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by:
Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210204073618.36336-1-elic@nvidia.com Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sagi Grimberg authored
[ Upstream commit cb8563f5 ] When the host sends multiple h2cdata PDUs, we keep track on the receive progress and calculate the scatterlist index and offsets. The issue is that sg_offset should only be kept for the first iov entry we map in the iovec as this is the difference between our cursor and the sg entry offset itself. In addition, the sg index was calculated wrong because we should not round up when dividing the command byte offset with PAG_SIZE. Fixes: 872d26a3 ("nvmet-tcp: add NVMe over TCP target driver") Reported-by:
Narayan Ayalasomayajula <Narayan.Ayalasomayajula@wdc.com> Tested-by:
Narayan Ayalasomayajula <Narayan.Ayalasomayajula@wdc.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Hermann Lauer authored
[ Upstream commit a900cac3 ] BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high packet loss rates. The realtek phy driver overrides the settings of the pull ups for the delays, so fix this for BananaPro. Fix the phy-mode description to correctly reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 10662a33 ("ARM: dts: sun7i: Add dts file for Bananapro board") Signed-off-by:
Hermann Lauer <Hermann.Lauer@uni-heidelberg.de> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210128111842.GA11919@lemon.iwr.uni-heidelberg.de Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
[ Upstream commit 4ace7a6e ] The "ring->addr = addr;" assignment is done a few lines later so we can't use "ring->addr" yet. The correct dma_handle is "addr". Fixes: 650d1603 ("soc: qcom: ipa: the generic software interface") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/YBjpTU2oejkNIULT@mwanda Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Heiner Kallweit authored
[ Upstream commit cc9f07a8 ] So far phy_disconnect() is called before free_irq(). If CONFIG_DEBUG_SHIRQ is set and interrupt is shared, then free_irq() creates an "artificial" interrupt by calling the interrupt handler. The "link change" flag is set in the interrupt status register, causing phylib to eventually call phy_suspend(). Because the net_device is detached from the PHY already, the PHY driver can't recognize that WoL is configured and powers down the PHY. Fixes: f1e911d5 ("r8169: add basic phylib support") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/fe732c2c-a473-9088-3974-df83cfbd6efd@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Stefan Chulski authored
[ Upstream commit 43f4a20a ] Last TCAM data contains TCAM enable bit. It should be written after SRAM data before entry enabled. Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by:
Stefan Chulski <stefanc@marvell.com> Link: https://lore.kernel.org/r/1612172139-28343-1-git-send-email-stefanc@marvell.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Xie He authored
[ Upstream commit 88c7a9fd ] When sending a packet, we will prepend it with an LAPB header. This modifies the shared parts of a cloned skb, so we should copy the skb rather than just clone it, before we prepend the header. In "Documentation/networking/driver.rst" (the 2nd point), it states that drivers shouldn't modify the shared parts of a cloned skb when transmitting. The "dev_queue_xmit_nit" function in "net/core/dev.c", which is called when an skb is being sent, clones the skb and sents the clone to AF_PACKET sockets. Because the LAPB drivers first remove a 1-byte pseudo-header before handing over the skb to us, if we don't copy the skb before prepending the LAPB header, the first byte of the packets received on AF_PACKET sockets can be corrupted. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Xie He <xie.he.0141@gmail.com> Acked-by:
Martin Schiller <ms@dev.tdt.de> Link: https://lore.kernel.org/r/2021020105570...
-
Maor Dickman authored
[ Upstream commit a34ffec8 ] In case of failure in tc update skb the packet is dropped without freeing the skb. Fixed by freeing the skb in case failure in tc update skb. Fixes: d6d27782 ("net/mlx5: E-Switch, Restore chain id on miss") Fixes: c7569097 ("net/mlx5e: Add tc chains offload support for nic flows") Signed-off-by:
Maor Dickman <maord@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Maxim Mikityanskiy authored
[ Upstream commit 5a2ba25a ] max_opened_tc is used for stats, so that potentially non-zero stats won't disappear when num_tc decreases. However, mlx5e_setup_tc_mqprio fails to update it in the flow where channels are closed. This commit fixes it. The new value of priv->channels.params.num_tc is always checked on exit. In case of errors it will just be the old value, and in case of success it will be the updated value. Fixes: 05909bab ("net/mlx5e: Avoid reset netdev stats on configuration changes") Signed-off-by:
Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Maor Gottlieb authored
[ Upstream commit a5bfe6b4 ] When creation of a new rule that requires allocation of an FTE fails, need to call to tree_put_node on the FTE in order to release its' resource. Fixes: cefc2355 ("net/mlx5: Fix FTE cleanup") Signed-off-by:
Maor Gottlieb <maorg@nvidia.com> Reviewed-by:
Alaa Hleihel <alaa@nvidia.com> Reviewed-by:
Mark Bloch <mbloch@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Daniel Jurgens authored
[ Upstream commit ed5e83a3 ] The function calculation always results in a value of 0. This works generally, but when the release all pages feature is enabled it will result in crashes. Fixes: 0aa12847 ("net/mlx5: Maintain separate page trees for ECPF and PF functions") Signed-off-by:
Daniel Jurgens <danielj@nvidia.com> Reported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Lijun Pan authored
[ Upstream commit 5e9eff5d ] Returning -EBUSY in ibmvnic_remove() does not actually hold the removal procedure since driver core doesn't care for the return value (see __device_release_driver() in drivers/base/dd.c calling dev->bus->remove()) though vio_bus_remove (in arch/powerpc/platforms/pseries/vio.c) records the return value and passes it on. [1] During the device removal precedure, checking for resetting bit is dropped so that we can continue executing all the cleanup calls in the rest of the remove function. Otherwise, it can cause latent memory leaks and kernel crashes. [1] https://lore.kernel.org/linuxppc-dev/20210117101242.dpwayq6wdgfdzirl@pengutronix.de/T/#m48f5befd96bc9842ece2a3ad14f4c27747206a53 Reported-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 7d7195a0 ("ibmvnic: Do not process device remove during device reset") Signed-off-by:
Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20210129043402.95744-1-ljp@linux.ibm.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Aleksandr Loktionov authored
[ Upstream commit f559a356 ] This reverts commit 2ad1274f VF queues were not brought up when PF was brought up after being downed if the VF driver disabled VFs queues during PF down. This could happen in some older or external VF driver implementations. The problem was that PF driver used vf->queues_enabled as a condition to decide what link-state it would send out which caused the issue. Remove the check for vf->queues_enabled in the VF link notify. Now VF will always be notified of the current link status. Also remove the queues_enabled member from i40e_vf structure as it is not used anymore. Otherwise VNF implementation was broken and caused a link flap. The original commit was a workaround to avoid breaking existing VFs though it's really a fault of the VF code not the PF. The commit should be safe to revert as all of the VFs we know of have been fixed. Also, since we now know there is a related bug in the workaround, removing it is preferred. Fixes: 2ad1274f ("i40e: don't report link up for a VF who hasn't enabled") Signed-off-by:
Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by:
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Kevin Lo authored
[ Upstream commit b8811456 ] Check return value from ret_val to make error check actually work. Fixes: 4eb80801 ("igc: Add setup link functionality") Signed-off-by:
Kevin Lo <kevlo@kevlo.org> Acked-by:
Sasha Neftin <sasha.neftin@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Kevin Lo authored
[ Upstream commit ebc8d125 ] This patch sets the default return value to -IGC_ERR_NVM in igc_write_nvm_srwr. Without this change it wouldn't lead to a shadow RAM write EEWR timeout. Fixes: ab405612 ("igc: Add NVM support") Signed-off-by:
Kevin Lo <kevlo@kevlo.org> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Chuck Lever authored
[ Upstream commit bad4c6eb ] Anj Duvnjak reports that the Kodi.tv NFS client is not able to read video files from a v5.10.11 Linux NFS server. The new sendpage-based TCP sendto logic was not attentive to non- zero page_base values. nfsd_splice_read() sets that field when a READ payload starts in the middle of a page. The Linux NFS client rarely emits an NFS READ that is not page- aligned. All of my testing so far has been with Linux clients, so I missed this one. Reported-by:
A. Duvnjak <avian@extremenerds.net> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211471 Fixes: 4a85a6a3 ("SUNRPC: Handle TCP socket sends with kernel_sendpage() again") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Tested-by:
A. Duvnjak <avian@extremenerds.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Zyta Szpak authored
[ Upstream commit aa880c6f ] Dcfg was overlapping with clockgen address space which resulted in failure in memory allocation for dcfg. According regs description dcfg size should not be bigger than 4KB. Signed-off-by:
Zyta Szpak <zr@semihalf.com> Fixes: 8126d881 ("arm64: dts: add QorIQ LS1046A SoC support") Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
David Howells authored
[ Upstream commit 5399d522 ] AF_RXRPC sockets use UDP ports in encap mode. This causes socket and dst from an incoming packet to get stolen and attached to the UDP socket from whence it is leaked when that socket is closed. When a network namespace is removed, the wait for dst records to be cleaned up happens before the cleanup of the rxrpc and UDP socket, meaning that the wait never finishes. Fix this by moving the rxrpc (and, by dependence, the afs) private per-network namespace registrations to the device group rather than subsys group. This allows cached rxrpc local endpoints to be cleared and their UDP sockets closed before we try waiting for the dst records. The symptom is that lines looking like the following: unregister_netdevice: waiting for lo to become free get emitted at regular intervals after running something like the referenced syzbot test. Thanks to Vadim for tracking this down and work out the fix. Reported-by:
<syzbot+df400f2f24a1677cd7e0@syzkaller.appspotmail.com> Reported-by:
Vadim Fedorenko <vfedorenko@novek.ru> Fixes: 5271953c ("rxrpc: Use the UDP encap_rcv hook") Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Vadim Fedorenko <vfedorenko@novek.ru> Link: https://lore.kernel.org/r/161196443016.3868642.5577440140646403533.stgit@warthog.procyon.org.uk Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Heiner Kallweit authored
[ Upstream commit 8d520b4d ] It was reported that on RTL8125 network breaks under heavy UDP load, e.g. torrent traffic ([0], from comment 27). Realtek confirmed a hw bug and provided me with a test version of the r8125 driver including a workaround. Tests confirmed that the workaround fixes the issue. I modified the original version of the workaround to meet mainline code style. [0] https://bugzilla.kernel.org/show_bug.cgi?id=209839 v2: - rebased to net v3: - make rtl_skb_is_udp() more robust and use skb_header_pointer() to access the ip(v6) header v4: - remove dependency on ptp_classify.h - replace magic number with offsetof(struct udphdr, len) Fixes: f1bce4ad ("r8169: add support for RTL8125") Tested-by:
xplo <xplo.bn@gmail.com> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Acked-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/6e453d49-1801-e6de-d5f7-d7e6c7526c8f@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Marek Szyprowski authored
[ Upstream commit daf12bee ] For the proper reboot Odroid-C4 board requires to switch TFLASH_VDD_EN pin to the high impedance mode, otherwise the board is stuck in the middle of loading early stages of the bootloader from SD card. This can be achieved by using the OPEN_DRAIN flag instead of the ACTIVE_HIGH, what will leave the pin in input mode to achieve high state (pin has the pull-up) and solve the issue. Suggested-by:
Neil Armstrong <narmstrong@baylibre.com> Fixes: 326e5751 ("arm64: dts: meson-sm1: add support for Hardkernel ODROID-C4") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20210122055218.27241-1-m.szyprowski@samsung.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Quentin Monnet authored
[ Upstream commit 150a2732 ] Building the kernel with CONFIG_BPF_PRELOAD, and by providing a relative path for the output directory, may fail with the following error: $ make O=build bindeb-pkg ... /.../linux/tools/scripts/Makefile.include:5: *** O=build does not exist. Stop. make[7]: *** [/.../linux/kernel/bpf/preload/Makefile:9: kernel/bpf/preload/libbpf.a] Error 2 make[6]: *** [/.../linux/scripts/Makefile.build:500: kernel/bpf/preload] Error 2 make[5]: *** [/.../linux/scripts/Makefile.build:500: kernel/bpf] Error 2 make[4]: *** [/.../linux/Makefile:1799: kernel] Error 2 make[4]: *** Waiting for unfinished jobs.... In the case above, for the "bindeb-pkg" target, the error is produced by the "dummy" check in Makefile.include, called from libbpf's Makefile. This check changes directory to $(PWD) before checking for the existence of $(O). But at this step we have $(PWD) pointing to "/.../linux/build", and $(O) pointing to "build". So the Makefile.include tries in fact to assert the existence of a directory named "/.../linux/build/build", which does not exist. Note that the error does not occur for all make targets and architectures combinations. This was observed on x86 for "bindeb-pkg", or for a regular build for UML [0]. Here are some details. The root Makefile recursively calls itself once, after changing directory to $(O). The content for the variable $(PWD) is preserved across recursive calls to make, so it is unchanged at this step. For "bindeb-pkg", $(PWD) is eventually updated because the target writes a new Makefile (as debian/rules) and calls it indirectly through dpkg-buildpackage. This script does not preserve $(PWD), which is reset to the current working directory when the target in debian/rules is called. Although not investigated, it seems likely that something similar causes UML to change its value for $(PWD). Non-trivial fixes could be to remove the use of $(PWD) from the "dummy" check, or to make sure that $(PWD) and $(O) are preserved or updated to always play well and form a valid $(PWD)/$(O) path across the different targets and architectures. Instead, we take a simpler approach and just update $(O) when calling libbpf's Makefile, so it points to an absolute path which should always resolve for the "dummy" check run (through includes) by that Makefile. David Gow previously posted a slightly different version of this patch as a RFC [0], two months ago or so. [0] https://lore.kernel.org/bpf/20201119085022.3606135-1-davidgow@google.com/t/#u Fixes: d71fa5c9 ("bpf: Add kernel module with user mode driver that populates bpffs.") Reported-by:
David Gow <davidgow@google.com> Signed-off-by:
Quentin Monnet <quentin@isovalent.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Andrii Nakryiko <andrii@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/bpf/20210126161320.24561-1-quentin@isovalent.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Johannes Berg authored
[ Upstream commit f4172b08 ] Since struct device is refcounted, we shouldn't free the vu_dev immediately when it's removed from the platform device, but only when the references actually all go away. Move the freeing to the release to accomplish that. Fixes: 5d38f324 ("um: drivers: Add virtio vhost-user driver") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pan Bian authored
[ Upstream commit b9557caa ] Put file f if inode_storage_ptr() returns NULL. Fixes: 8ea63684 ("bpf: Implement bpf_local_storage for inodes") Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
KP Singh <kpsingh@kernel.org> Link: https://lore.kernel.org/bpf/20210121020856.25507-1-bianpan2016@163.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Loris Reiff authored
[ Upstream commit f4a2da75 ] Since ctx.optlen is signed, a larger value than max_value could be passed, as it is later on used as unsigned, which causes a WARN_ON_ONCE in the copy_to_user. Fixes: 0d01da6a ("bpf: implement getsockopt and setsockopt hooks") Signed-off-by:
Loris Reiff <loris.reiff@liblor.ch> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20210122164232.61770-2-loris.reiff@liblor.ch Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Loris Reiff authored
[ Upstream commit bb8b81e3 ] A toctou issue in `__cgroup_bpf_run_filter_getsockopt` can trigger a WARN_ON_ONCE in a check of `copy_from_user`. `*optlen` is checked to be non-negative in the individual getsockopt functions beforehand. Changing `*optlen` in a race to a negative value will result in a `copy_from_user(ctx.optval, optval, ctx.optlen)` with `ctx.optlen` being a negative integer. Fixes: 0d01da6a ("bpf: implement getsockopt and setsockopt hooks") Signed-off-by:
Loris Reiff <loris.reiff@liblor.ch> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20210122164232.61770-1-loris.reiff@liblor.ch Signed-off-by:
Sasha Levin <sashal@kernel.org>
-