- Feb 16, 2022
-
-
Stephan Brunner authored
commit fa77ce20 upstream. Programmable lab power supplies made by GW Instek, such as the GPP-2323, have a USB port exposing a serial port to control the device. Stringing the supplied Windows driver, references to the ch341 chip are found. Binding the existing ch341 driver to the VID/PID of the GPP-2323 ("GW Instek USB2.0-Serial" as per the USB product name) works out of the box, communication and control is now possible. This patch should work with any GPP series power supply due to similarities in the product line. Signed-off-by:
Stephan Brunner <s.brunner@stephan-brunner.net> Link: https://lore.kernel.org/r/4a47b864-0816-6f6a-efee-aa20e74bcdc6@stephan-brunner.net Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pawel Dembicki authored
commit d48384c7 upstream. Modem from ZTE MF286D is an Qualcomm MDM9250 based 3G/4G modem. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=19d2 ProdID=1485 Rev=52.87 S: Manufacturer=ZTE,Incorporated S: Product=ZTE Technologies MSM S: SerialNumber=MF286DZTED000000 C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=896mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by:
Pawel Dembicki <paweldembicki@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Cameron Williams authored
commit fbb9b194 upstream. This patch adds support for the Brainboxes US-159, US-235 and US-320 USB-to-Serial devices. Signed-off-by:
Cameron Williams <cang1@live.co.uk> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jann Horn authored
commit 292d2c82 upstream. Under dummy_hcd, every available endpoint is *either* IN or OUT capable. But with some real hardware, there are endpoints that support both IN and OUT. In particular, the PLX 2380 has four available endpoints that each support both IN and OUT. raw-gadget currently gets confused and thinks that any endpoint that is usable as an IN endpoint can never be used as an OUT endpoint. Fix it by looking at the direction in the configured endpoint descriptor instead of looking at the hardware capabilities. With this change, I can use the PLX 2380 with raw-gadget. Fixes: f2c2e717 ("usb: gadget: add raw-gadget interface") Cc: stable <stable@vger.kernel.org> Tested-by:
Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by:
Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by:
Jann Horn <jannh@google.com> Link: https://lore.kernel.org/r/20220126205214.2149936-1-jannh@google.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Hofman authored
commit 54321841 upstream. Several users have reported that their Win10 does not enumerate UAC2 gadget with the existing wTerminalType set to UAC_INPUT_TERMINAL_UNDEFINED/UAC_INPUT_TERMINAL_UNDEFINED, e.g. https://github.com/raspberrypi/linux/issues/4587#issuecomment-926567213. While the constant is officially defined by the USB terminal types document, e.g. XMOS firmware for UAC2 (commonly used for Win10) defines no undefined output terminal type in its usbaudio20.h header. Therefore wTerminalType of EP-IN is set to UAC_INPUT_TERMINAL_MICROPHONE and wTerminalType of EP-OUT to UAC_OUTPUT_TERMINAL_SPEAKER for the UAC2 gadget. Signed-off-by:
Pavel Hofman <pavel.hofman@ivitera.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220131071813.7433-1-pavel.hofman@ivitera.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
commit 38ea1eac upstream. Check the size of the RNDIS_MSG_SET command given to us before attempting to respond to an invalid message size. Reported-by:
Szymon Heidrich <szymon.heidrich@gmail.com> Cc: stable@kernel.org Tested-by:
Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Szymon Heidrich authored
commit 75e5b484 upstream. Stall the control endpoint in case provided index exceeds array size of MAX_CONFIG_INTERFACES or when the retrieved function pointer is null. Signed-off-by:
Szymon Heidrich <szymon.heidrich@gmail.com> Cc: stable@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Adam Ford authored
commit 459702ee upstream. The support the external role switch a variety of situations were addressed, but the transition from USB_ROLE_HOST to USB_ROLE_NONE leaves the host up which can cause some error messages when switching from host to none, to gadget, to none, and then back to host again. xhci-hcd ee000000.usb: Abort failed to stop command ring: -110 xhci-hcd ee000000.usb: xHCI host controller not responding, assume dead xhci-hcd ee000000.usb: HC died; cleaning up usb 4-1: device not accepting address 6, error -108 usb usb4-port1: couldn't allocate usb_device After this happens it will not act as a host again. Fix this by releasing the host mode when transitioning to USB_ROLE_NONE. Fixes: 0604160d ("usb: gadget: udc: renesas_usb3: Enhance role switch support") Cc: stable <stable@vger.kernel.org> Reviewed-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Adam Ford <aford173@gmail.com> Link: https://lore.kernel.org/r/20220128223603.2362621-1-aford173@gmail.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Udipto Goswami authored
commit 117b4e96 upstream. With CPU re-ordering on write instructions, there might be a chance that the HWO is set before the TRB is updated with the new mapped buffer address. And in the case where core is processing a list of TRBs it is possible that it fetched the TRBs when the HWO is set but before the buffer address is updated. Prevent this by adding a memory barrier before the HWO is updated to ensure that the core always process the updated TRBs. Fixes: f6bafc6a ("usb: dwc3: convert TRBs into bitshifts") Cc: stable <stable@vger.kernel.org> Reviewed-by:
Pavankumar Kondeti <quic_pkondeti@quicinc.com> Signed-off-by:
Udipto Goswami <quic_ugoswami@quicinc.com> Link: https://lore.kernel.org/r/1644207958-18287-1-git-send-email-quic_ugoswami@quicinc.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Anderson authored
commit 0a907ee9 upstream. of_node_put should always be called on device nodes gotten from of_get_*. Additionally, it should only be called after there are no remaining users. To address the first issue, call of_node_put if later steps in ulpi_register fail. To address the latter, call put_device if device_register fails, which will call ulpi_dev_release if necessary. Fixes: ef6a7bcf ("usb: ulpi: Support device discovery via DT") Cc: stable <stable@vger.kernel.org> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20220127190004.1446909-3-sean.anderson@seco.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sean Anderson authored
commit 092f45b1 upstream. Drivers are not unbound from the device when ulpi_unregister_interface is called. Move of_node-freeing code to ulpi_dev_release which is called only after all users are gone. Fixes: ef6a7bcf ("usb: ulpi: Support device discovery via DT") Cc: stable <stable@vger.kernel.org> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20220127190004.1446909-2-sean.anderson@seco.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jann Horn authored
commit 57bc3d3a upstream. ax88179_rx_fixup() contains several out-of-bounds accesses that can be triggered by a malicious (or defective) USB device, in particular: - The metadata array (hdr_off..hdr_off+2*pkt_cnt) can be out of bounds, causing OOB reads and (on big-endian systems) OOB endianness flips. - A packet can overlap the metadata array, causing a later OOB endianness flip to corrupt data used by a cloned SKB that has already been handed off into the network stack. - A packet SKB can be constructed whose tail is far beyond its end, causing out-of-bounds heap data to be considered part of the SKB's data. I have tested that this can be used by a malicious USB device to send a bogus ICMPv6 Echo Request and receive an ICMPv6 Echo Reply in response that contains random kernel heap data. It's probably also possible to get OOB writes from this on a little-endian system somehow - maybe by triggering skb_cow() via IP options processing -, but I haven't tested that. Fixes: e2ca90c2 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Cc: stable@kernel.org Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
commit 736e8d89 upstream. This reverts commit 269cbcf7 . It causes build errors as reported by the kernel test robot. Link: https://lore.kernel.org/r/202202112236.AwoOTtHO-lkp@intel.com Reported-by:
kernel test robot <lkp@intel.com> Fixes: 269cbcf7 ("usb: dwc2: drd: fix soft connect when gadget is unconfigured") Cc: stable@kernel.org Cc: Amelie Delaunay <amelie.delaunay@foss.st.com> Cc: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fabrice Gasnier authored
commit 269cbcf7 upstream. When the gadget driver hasn't been (yet) configured, and the cable is connected to a HOST, the SFTDISCON gets cleared unconditionally, so the HOST tries to enumerate it. At the host side, this can result in a stuck USB port or worse. When getting lucky, some dmesg can be observed at the host side: new high-speed USB device number ... device descriptor read/64, error -110 Fix it in drd, by checking the enabled flag before calling dwc2_hsotg_core_connect(). It will be called later, once configured, by the normal flow: - udc_bind_to_driver - usb_gadget_connect - dwc2_hsotg_pullup - dwc2_hsotg_core_connect Fixes: 17f93402 ("usb: dwc2: override PHY input signals with usb role switch support") Cc: stable@kernel.org Reviewed-by:
Amelie Delaunay <amelie.delaunay@foss.st.com> Acked-by:
Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/1644423353-17859-1-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jonas Malaco authored
commit c0689e46 upstream. Commit effa4531 ("i2c: i801: Don't silently correct invalid transfer size") revealed that ee1004_eeprom_read() did not properly limit how many bytes to read at once. In particular, i2c_smbus_read_i2c_block_data_or_emulated() takes the length to read as an u8. If count == 256 after taking into account the offset and page boundary, the cast to u8 overflows. And this is common when user space tries to read the entire EEPROM at once. To fix it, limit each read to I2C_SMBUS_BLOCK_MAX (32) bytes, already the maximum length i2c_smbus_read_i2c_block_data_or_emulated() allows. Fixes: effa4531 ("i2c: i801: Don't silently correct invalid transfer size") Cc: stable@vger.kernel.org Reviewed-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
Jonas Malaco <jonas@protocubo.io> Link: https://lore.kernel.org/r/20220203165024.47767-1-jonas@protocubo.io Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
TATSUKAWA KOSUKE (立川 江介) authored
commit c816b2e6 upstream. The poll man page says POLLRDNORM is equivalent to POLLIN when used as an event. $ man poll <snip> POLLRDNORM Equivalent to POLLIN. However, in n_tty driver, POLLRDNORM does not return until timeout even if there is terminal input, whereas POLLIN returns. The following test program works until kernel-3.17, but the test stops in poll() after commit 57087d51 ("tty: Fix spurious poll() wakeups"). [Steps to run test program] $ cc -o test-pollrdnorm test-pollrdnorm.c $ ./test-pollrdnorm foo <-- Type in something from the terminal followed by [RET]. The string should be echoed back. ------------------------< test-pollrdnorm.c >------------------------ #include <stdio.h> #include <errno.h> #include <poll.h> #include <unistd.h> void main(void) { int n; unsigned char buf[8]; struct pollfd fds[1] = {{ 0, POLLRDNORM, 0 }}; n = poll(fds, 1, -1); if (n < 0) perror("poll"); n = read(0, buf, 8); if (n < 0) perror("read"); if (n > 0) write(1, buf, n); } ------------------------------------------------------------------------ The attached patch fixes this problem. Many calls to wake_up_interruptible_poll() in the kernel source code already specify "POLLIN | POLLRDNORM". Fixes: 57087d51 ("tty: Fix spurious poll() wakeups") Cc: stable@vger.kernel.org Signed-off-by:
Kosuke Tatsukawa <tatsu-ab1@nec.com> Link: https://lore.kernel.org/r/TYCPR01MB81901C0F932203D30E452B3EA5209@TYCPR01MB8190.jpnprd01.prod.outlook.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jakob Koschel authored
commit 28cb138f upstream. in vt_setactivate an almost identical code path has been patched with array_index_nospec. In the VT_ACTIVATE path the user input is from a system call argument instead of a usercopy. For consistency both code paths should have the same mitigations applied. Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU Amsterdam. Co-developed-by:
Brian Johannesmeyer <bjohannesmeyer@gmail.com> Signed-off-by:
Brian Johannesmeyer <bjohannesmeyer@gmail.com> Signed-off-by:
Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220127144406.3589293-2-jakobkoschel@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jakob Koschel authored
commit 61cc70d9 upstream. array_index_nospec ensures that an out-of-bounds value is set to zero on the transient path. Decreasing the value by one afterwards causes a transient integer underflow. vsa.console should be decreased first and then sanitized with array_index_nospec. Kasper Acknowledgements: Jakob Koschel, Brian Johannesmeyer, Kaveh Razavi, Herbert Bos, Cristiano Giuffrida from the VUSec group at VU Amsterdam. Co-developed-by:
Brian Johannesmeyer <bjohannesmeyer@gmail.com> Signed-off-by:
Brian Johannesmeyer <bjohannesmeyer@gmail.com> Signed-off-by:
Jakob Koschel <jakobkoschel@gmail.com> Link: https://lore.kernel.org/r/20220127144406.3589293-1-jakobkoschel@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vladimir Oltean authored
[ Upstream commit 51a04ebf ] Since struct mv88e6xxx_mdio_bus *mdio_bus is the bus->priv of something allocated with mdiobus_alloc_size(), this means that mdiobus_free(bus) will free the memory backing the mdio_bus as well. Therefore, the mdio_bus->list element is freed memory, but we continue to iterate through the list of MDIO buses using that list element. To fix this, use the proper list iterator that handles element deletion by keeping a copy of the list element next pointer. Fixes: f53a2ce8 ("net: dsa: mv88e6xxx: don't use devres for mdiobus") Reported-by:
Rafael Richter <rafael.richter@gin.de> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220210174017.3271099-1-vladimir.oltean@nxp.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Colin Foster authored
[ Upstream commit 7fbf6795 ] An ongoing workqueue populates the stats buffer. At the same time, a user might query the statistics. While writing to the buffer is mutex-locked, reading from the buffer wasn't. This could lead to buggy reads by ethtool. This patch fixes the former blamed commit, but the bug was introduced in the latter. Signed-off-by:
Colin Foster <colin.foster@in-advantage.com> Fixes: 1e1caa97 ("ocelot: Clean up stats update deferred work") Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Reported-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/all/20220210150451.416845-2-colin.foster@in-advantage.com/ Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jesse Brandeburg authored
[ Upstream commit 46b699c5 ] The driver was avoiding offload for IPIP (at least) frames due to parsing the inner header offsets incorrectly when trying to check lengths. This length check works for VXLAN frames but fails on IPIP frames because skb_transport_offset points to the inner header in IPIP frames, which meant the subtraction of transport_header from inner_network_header returns a negative value (-20). With the code before this patch, everything continued to work, but GSO was being used to segment, causing throughputs of 1.5Gb/s per thread. After this patch, throughput is more like 10Gb/s per thread for IPIP traffic. Fixes: e94d4478 ("ice: Implement filter sync, NDO operations and bump version") Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by:
Paul Menzel <pmenzel@molgen.mpg.de> Tested-by:
Gurucharan G <gurucharanx.g@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
[ Upstream commit 21338d58 ] Propagate the error code from ice_get_link_default_override() instead of returning success. Fixes: ea78ce4d ("ice: add link lenient and default override support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Tested-by:
Gurucharan G <gurucharanx.g@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Robert-Ionut Alexa authored
[ Upstream commit 9ccc6e0c ] The netdev should be unregistered before we are disconnecting from the MAC/PHY so that the dev_close callback is called and the PHY and the phylink workqueues are actually stopped before we are disconnecting and destroying the phylink instance. Fixes: 71947923 ("dpaa2-eth: add MAC/PHY support through phylink") Signed-off-by:
Robert-Ionut Alexa <robert-ionut.alexa@nxp.com> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Raju Rangoju authored
[ Upstream commit 68c2d6af ] Hardware interrupts are enabled during the pci probe, however, they are not disabled during pci removal. Disable all hardware interrupts during pci removal to avoid any issues. Fixes: e7537740 ("amd-xgbe: Update PCI support to use new IRQ functions") Suggested-by:
Selwin Sebastian <Selwin.Sebastian@amd.com> Signed-off-by:
Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jon Maloy authored
[ Upstream commit c7223d68 ] It would be easy to craft a message containing an illegal binding table update operation. This is handled correctly by the code, but the corresponding warning printout is not rate limited as is should be. We fix this now. Fixes: b97bf3fd ("[TIPC] Initial merge") Signed-off-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Joel Stanley authored
[ Upstream commit bc1c3c3b ] Fix loading of the driver when built as a module. Fixes: f160e994 ("net: phy: Add mdio-aspeed") Signed-off-by:
Joel Stanley <joel@jms.id.au> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Andrew Jeffery <andrew@aj.id.au> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 68468d8c ] veth being NETIF_F_LLTX enabled, we need to be more careful whenever we read/write rq->rx_notify_masked. BUG: KCSAN: data-race in veth_xmit / veth_xmit write to 0xffff888133d9a9f8 of 1 bytes by task 23552 on cpu 0: __veth_xdp_flush drivers/net/veth.c:269 [inline] veth_xmit+0x307/0x470 drivers/net/veth.c:350 __netdev_start_xmit include/linux/netdevice.h:4683 [inline] netdev_start_xmit include/linux/netdevice.h:4697 [inline] xmit_one+0x105/0x2f0 net/core/dev.c:3473 dev_hard_start_xmit net/core/dev.c:3489 [inline] __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149 br_dev_queue_push_xmit+0x3ce/0x430 net/bridge/br_forward.c:53 NF_HOOK include/linux/netfilter.h:307 [inline] br_forward_finish net/bridge/br_forward.c:66 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] __br_forward+0x2e4/0x400 net/bridge/br_forward.c:115 br_flood+0x521/0x5c0 net/bridge/br_forward.c:242 br_dev_xmit+0x8b6/0x960 __netdev_start_xmit include/linux/netdevice.h:4683 [inline] netdev_start_xmit include/linux/netdevice.h:4697 [inline] xmit_one+0x105/0x2f0 net/core/dev.c:3473 dev_hard_start_xmit net/core/dev.c:3489 [inline] __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149 neigh_hh_output include/net/neighbour.h:525 [inline] neigh_output include/net/neighbour.h:539 [inline] ip_finish_output2+0x6f8/0xb70 net/ipv4/ip_output.c:228 ip_finish_output+0xfb/0x240 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:451 [inline] ip_local_out net/ipv4/ip_output.c:126 [inline] ip_send_skb+0x6e/0xe0 net/ipv4/ip_output.c:1570 udp_send_skb+0x641/0x880 net/ipv4/udp.c:967 udp_sendmsg+0x12ea/0x14c0 net/ipv4/udp.c:1254 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888133d9a9f8 of 1 bytes by task 23563 on cpu 1: __veth_xdp_flush drivers/net/veth.c:268 [inline] veth_xmit+0x2d6/0x470 drivers/net/veth.c:350 __netdev_start_xmit include/linux/netdevice.h:4683 [inline] netdev_start_xmit include/linux/netdevice.h:4697 [inline] xmit_one+0x105/0x2f0 net/core/dev.c:3473 dev_hard_start_xmit net/core/dev.c:3489 [inline] __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149 br_dev_queue_push_xmit+0x3ce/0x430 net/bridge/br_forward.c:53 NF_HOOK include/linux/netfilter.h:307 [inline] br_forward_finish net/bridge/br_forward.c:66 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] __br_forward+0x2e4/0x400 net/bridge/br_forward.c:115 br_flood+0x521/0x5c0 net/bridge/br_forward.c:242 br_dev_xmit+0x8b6/0x960 __netdev_start_xmit include/linux/netdevice.h:4683 [inline] netdev_start_xmit include/linux/netdevice.h:4697 [inline] xmit_one+0x105/0x2f0 net/core/dev.c:3473 dev_hard_start_xmit net/core/dev.c:3489 [inline] __dev_queue_xmit+0x86d/0xf90 net/core/dev.c:4116 dev_queue_xmit+0x13/0x20 net/core/dev.c:4149 neigh_hh_output include/net/neighbour.h:525 [inline] neigh_output include/net/neighbour.h:539 [inline] ip_finish_output2+0x6f8/0xb70 net/ipv4/ip_output.c:228 ip_finish_output+0xfb/0x240 net/ipv4/ip_output.c:316 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip_output+0xf3/0x1a0 net/ipv4/ip_output.c:430 dst_output include/net/dst.h:451 [inline] ip_local_out net/ipv4/ip_output.c:126 [inline] ip_send_skb+0x6e/0xe0 net/ipv4/ip_output.c:1570 udp_send_skb+0x641/0x880 net/ipv4/udp.c:967 udp_sendmsg+0x12ea/0x14c0 net/ipv4/udp.c:1254 inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00 -> 0x01 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 23563 Comm: syz-executor.5 Not tainted 5.17.0-rc2-syzkaller-00064-gc36c04c2e132 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 948d4f21 ("veth: Add driver XDP") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Antoine Tenart authored
[ Upstream commit 9eeabdf1 ] When uncloning an skb dst and its associated metadata, a new dst+metadata is allocated and later replaces the old one in the skb. This is helpful to have a non-shared dst+metadata attached to a specific skb. The issue is the uncloned dst+metadata is initialized with a refcount of 1, which is increased to 2 before attaching it to the skb. When tun_dst_unclone returns, the dst+metadata is only referenced from a single place (the skb) while its refcount is 2. Its refcount will never drop to 0 (when the skb is consumed), leading to a memory leak. Fix this by removing the call to dst_hold in tun_dst_unclone, as the dst+metadata refcount is already 1. Fixes: fc4099f1 ("openvswitch: Fix egress tunnel info.") Cc: Pravin B Shelar <pshelar@ovn.org> Reported-by:
Vlad Buslov <vladbu@nvidia.com> Tested-by:
Vlad Buslov <vladbu@nvidia.com> Signed-off-by:
Antoine Tenart <atenart@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Antoine Tenart authored
[ Upstream commit cfc56f85 ] When uncloning an skb dst and its associated metadata a new dst+metadata is allocated and the tunnel information from the old metadata is copied over there. The issue is the tunnel metadata has references to cached dst, which are copied along the way. When a dst+metadata refcount drops to 0 the metadata is freed including the cached dst entries. As they are also referenced in the initial dst+metadata, this ends up in UaFs. In practice the above did not happen because of another issue, the dst+metadata was never freed because its refcount never dropped to 0 (this will be fixed in a subsequent patch). Fix this by initializing the dst cache after copying the tunnel information from the old metadata to also unshare the dst cache. Fixes: d71785ff ("net: add dst_cache to ovs vxlan lwtunnel") Cc: Paolo Abeni <pabeni@redhat.com> Reported-by:
Vlad Buslov <vladbu@nvidia.com> Tested-by:
Vlad Buslov <vladbu@nvidia.com> Signed-off-by:
Antoine Tenart <atenart@kernel.org> Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Louis Peens authored
[ Upstream commit 7db788ad ] When looking for a global mac index the extra NFP_TUN_PRE_TUN_IDX_BIT that gets set if nfp_flower_is_supported_bridge is true is not taken into account. Consequently the path that should release the ida_index in cleanup is never triggered, causing messages like: nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex. nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex. nfp 0000:02:00.0: nfp: Failed to offload MAC on br-ex. after NFP_MAX_MAC_INDEX number of reconfigs. Ultimately this lead to new tunnel flows not being offloaded. Fix this by unsetting the NFP_TUN_PRE_TUN_IDX_BIT before checking if the port is of type OTHER. Fixes: 2e0bc7f3 ("nfp: flower: encode mac indexes with pre-tunnel rule check") Signed-off-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220208101453.321949-1-simon.horman@corigine.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 5611a006 ] ip[6]mr_free_table() can only be called under RTNL lock. RTNL: assertion failed at net/core/dev.c (10367) WARNING: CPU: 1 PID: 5890 at net/core/dev.c:10367 unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367 Modules linked in: CPU: 1 PID: 5890 Comm: syz-executor.2 Not tainted 5.16.0-syzkaller-11627-g422ee58dc0ef #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:unregister_netdevice_many+0x1246/0x1850 net/core/dev.c:10367 Code: 0f 85 9b ee ff ff e8 69 07 4b fa ba 7f 28 00 00 48 c7 c6 00 90 ae 8a 48 c7 c7 40 90 ae 8a c6 05 6d b1 51 06 01 e8 8c 90 d8 01 <0f> 0b e9 70 ee ff ff e8 3e 07 4b fa 4c 89 e7 e8 86 2a 59 fa e9 ee RSP: 0018:ffffc900046ff6e0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff888050f51d00 RSI: ffffffff815fa008 RDI: fffff520008dfece RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815f3d6e R11: 0000000000000000 R12: 00000000fffffff4 R13: dffffc0000000000 R14: ffffc900046ff750 R15: ffff88807b7dc000 FS: 00007f4ab736e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fee0b4f8990 CR3: 000000001e7d2000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> mroute_clean_tables+0x244/0xb40 net/ipv6/ip6mr.c:1509 ip6mr_free_table net/ipv6/ip6mr.c:389 [inline] ip6mr_rules_init net/ipv6/ip6mr.c:246 [inline] ip6mr_net_init net/ipv6/ip6mr.c:1306 [inline] ip6mr_net_init+0x3f0/0x4e0 net/ipv6/ip6mr.c:1298 ops_init+0xaf/0x470 net/core/net_namespace.c:140 setup_net+0x54f/0xbb0 net/core/net_namespace.c:331 copy_net_ns+0x318/0x760 net/core/net_namespace.c:475 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 copy_namespaces+0x391/0x450 kernel/nsproxy.c:178 copy_process+0x2e0c/0x7300 kernel/fork.c:2167 kernel_clone+0xe7/0xab0 kernel/fork.c:2555 __do_sys_clone+0xc8/0x110 kernel/fork.c:2672 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f4ab89f9059 Code: Unable to access opcode bytes at RIP 0x7f4ab89f902f. RSP: 002b:00007f4ab736e118 EFLAGS: 00000206 ORIG_RAX: 0000000000000038 RAX: ffffffffffffffda RBX: 00007f4ab8b0bf60 RCX: 00007f4ab89f9059 RDX: 0000000020000280 RSI: 0000000020000270 RDI: 0000000040200000 RBP: 00007f4ab8a5308d R08: 0000000020000300 R09: 0000000020000300 R10: 00000000200002c0 R11: 0000000000000206 R12: 0000000000000000 R13: 00007ffc3977cc1f R14: 00007f4ab736e300 R15: 0000000000022000 </TASK> Fixes: f243e5a7 ("ipmr,ip6mr: call ip6mr_free_table() on failure path") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Cong Wang <cong.wang@bytedance.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220208053451.2885398-1-eric.dumazet@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vladimir Oltean authored
[ Upstream commit 0d120dfb ] As explained in commits: 74b6d7d1 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The GSWIP switch is a platform device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the GSWIP switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The gswip driver has the code structure in place for orderly mdiobus removal, so just replace devm_mdiobus_alloc() with the non-devres variant, and add manual free where necessary, to ensure that we don't let devres free a still-registered bus. Fixes: ac3a68d5 ("net: phy: don't abuse devres in devm_mdiobus_register()") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vladimir Oltean authored
[ Upstream commit 209bdb7e ] As explained in commits: 74b6d7d1 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The Felix VSC9959 switch is a PCI device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the felix switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The felix driver has the code structure in place for orderly mdiobus removal, so just replace devm_mdiobus_alloc_size() with the non-devres variant, and add manual free where necessary, to ensure that we don't let devres free a still-registered bus. Fixes: ac3a68d5 ("net: phy: don't abuse devres in devm_mdiobus_register()") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vladimir Oltean authored
[ Upstream commit 08f1a208 ] As explained in commits: 74b6d7d1 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The Starfighter 2 is a platform device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the bcm_sf2 switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The bcm_sf2 driver has the code structure in place for orderly mdiobus removal, so just replace devm_mdiobus_alloc() with the non-devres variant, and add manual free where necessary, to ensure that we don't let devres free a still-registered bus. Fixes: ac3a68d5 ("net: phy: don't abuse devres in devm_mdiobus_register()") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vladimir Oltean authored
[ Upstream commit 50facd86 ] As explained in commits: 74b6d7d1 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The ar9331 is an MDIO device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the ar9331 switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The ar9331 driver doesn't have a complex code structure for mdiobus removal, so just replace of_mdiobus_register with the devres variant in order to be all-devres and ensure that we don't free a still-registered bus. Fixes: ac3a68d5 ("net: phy: don't abuse devres in devm_mdiobus_register()") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vladimir Oltean authored
[ Upstream commit f53a2ce8 ] As explained in commits: 74b6d7d1 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The mv88e6xxx is an MDIO device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the Marvell switch driver on shutdown. systemd-shutdown[1]: Powering off. mv88e6085 0x0000000008b96000:00 sw_gl0: Link is Down fsl-mc dpbp.9: Removing from iommu group 7 fsl-mc dpbp.8: Removing from iommu group 7 ------------[ cut here ]------------ kernel BUG at drivers/net/phy/mdio_bus.c:677! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.16.5-00040-gdc05f73788e5 #15 pc : mdiobus_free+0x44/0x50 lr : devm_mdiobus_free+0x10/0x20 Call trace: mdiobus_free+0x44/0x50 devm_mdiobus_free+0x10/0x20 devres_release_all+0xa0/0x100 __device_release_driver+0x190/0x220 device_release_driver_internal+0xac/0xb0 device_links_unbind_consumers+0xd4/0x100 __device_release_driver+0x4c/0x220 device_release_driver_internal+0xac/0xb0 device_links_unbind_consumers+0xd4/0x100 __device_release_driver+0x94/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_device_remove+0x24/0x40 __fsl_mc_device_remove+0xc/0x20 device_for_each_child+0x58/0xa0 dprc_remove+0x90/0xb0 fsl_mc_driver_remove+0x20/0x5c __device_release_driver+0x21c/0x220 device_release_driver+0x28/0x40 bus_remove_device+0x118/0x124 device_del+0x174/0x420 fsl_mc_bus_remove+0x80/0x100 fsl_mc_bus_shutdown+0xc/0x1c platform_shutdown+0x20/0x30 device_shutdown+0x154/0x330 kernel_power_off+0x34/0x6c __do_sys_reboot+0x15c/0x250 __arm64_sys_reboot+0x20/0x30 invoke_syscall.constprop.0+0x4c/0xe0 do_el0_svc+0x4c/0x150 el0_svc+0x24/0xb0 el0t_64_sync_handler+0xa8/0xb0 el0t_64_sync+0x178/0x17c So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The Marvell driver already has a good structure for mdiobus removal, so just plug in mdiobus_free and get rid of devres. Fixes: ac3a68d5 ("net: phy: don't abuse devres in devm_mdiobus_register()") Reported-by:
Rafael Richter <Rafael.Richter@gin.de> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by:
Daniel Klauer <daniel.klauer@gin.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Mahesh Bandewar authored
[ Upstream commit 23de0d7b ] When 803.2ad mode enables a participating port, it should update the slave-array. I have observed that the member links are participating and are part of the active aggregator while the traffic is egressing via only one member link (in a case where two links are participating). Via kprobes I discovered that slave-arr has only one link added while the other participating link wasn't part of the slave-arr. I couldn't see what caused that situation but the simple code-walk through provided me hints that the enable_port wasn't always associated with the slave-array update. Fixes: ee637714 ("bonding: Simplify the xmit function for modes that use xmit_hash") Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20220207222901.1795287-1-maheshb@google.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Niklas Cassel authored
[ Upstream commit cc38ef93 ] Setting the output of a GPIO to 1 using gpiod_set_value(), followed by reading the same GPIO using gpiod_get_value(), will currently yield an incorrect result. This is because the SiFive GPIO device stores the output values in reg_set, not reg_dat. Supply the flag BGPIOF_READ_OUTPUT_REG_SET to bgpio_init() so that the generic driver reads the correct register. Fixes: 96868dce ("gpio/sifive: Add GPIO driver for SiFive SoCs") Signed-off-by:
Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> [Bartosz: added the Fixes tag] Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Rafael J. Wysocki authored
[ Upstream commit dc0075ba ] Commit 4a9af6ca ("ACPI: EC: Rework flushing of EC work while suspended to idle") made acpi_ec_dispatch_gpe() check pm_wakeup_pending(), but that is before canceling the SCI wakeup, so pm_wakeup_pending() is always true. This causes the loop in acpi_ec_dispatch_gpe() to always terminate after one iteration which may not be correct. Address this issue by canceling the SCI wakeup earlier, from acpi_ec_dispatch_gpe() itself. Fixes: 4a9af6ca ("ACPI: EC: Rework flushing of EC work while suspended to idle") Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christoph Niedermaier authored
[ Upstream commit 6df4432a ] In the function panel_simple_probe() the pointer panel->desc is assigned to the passed pointer desc. If function panel_dpi_probe() is called panel->desc will be updated, but further on only desc will be evaluated. So update the desc pointer to be able to use the data from the function panel_dpi_probe(). Fixes: 4a1d0dbc ("drm/panel: simple: add panel-dpi support") Signed-off-by:
Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Marek Vasut <marex@denx.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> To: dri-devel@lists.freedesktop.org Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220201110153.3479-1-cniedermaier@dh-electronics.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-