- Feb 09, 2022
-
-
Shin'ichiro Kawasaki authored
commit e804861b upstream. Quota disable ioctl starts a transaction before waiting for the qgroup rescan worker completes. However, this wait can be infinite and results in deadlock because of circular dependency among the quota disable ioctl, the qgroup rescan worker and the other task with transaction such as block group relocation task. The deadlock happens with the steps following: 1) Task A calls ioctl to disable quota. It starts a transaction and waits for qgroup rescan worker completes. 2) Task B such as block group relocation task starts a transaction and joins to the transaction that task A started. Then task B commits to the transaction. In this commit, task B waits for a commit by task A. 3) Task C as the qgroup rescan worker starts its job and starts a transaction. In this transaction start, task C waits for completion of the transaction that task A started and task B committed. This deadlock was found with fstests test case btrfs/115 and a zoned null_blk device. The test case enables and disables quota, and the block group reclaim was triggered during the quota disable by chance. The deadlock was also observed by running quota enable and disable in parallel with 'btrfs balance' command on regular null_blk devices. An example report of the deadlock: [372.469894] INFO: task kworker/u16:6:103 blocked for more than 122 seconds. [372.479944] Not tainted 5.16.0-rc8 #7 [372.485067] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [372.493898] task:kworker/u16:6 state:D stack: 0 pid: 103 ppid: 2 flags:0x00004000 [372.503285] Workqueue: btrfs-qgroup-rescan btrfs_work_helper [btrfs] [372.510782] Call Trace: [372.514092] <TASK> [372.521684] __schedule+0xb56/0x4850 [372.530104] ? io_schedule_timeout+0x190/0x190 [372.538842] ? lockdep_hardirqs_on+0x7e/0x100 [372.547092] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [372.555591] schedule+0xe0/0x270 [372.561894] btrfs_commit_transaction+0x18bb/0x2610 [btrfs] [372.570506] ? btrfs_apply_pending_changes+0x50/0x50 [btrfs] [372.578875] ? free_unref_page+0x3f2/0x650 [372.585484] ? finish_wait+0x270/0x270 [372.591594] ? release_extent_buffer+0x224/0x420 [btrfs] [372.599264] btrfs_qgroup_rescan_worker+0xc13/0x10c0 [btrfs] [372.607157] ? lock_release+0x3a9/0x6d0 [372.613054] ? btrfs_qgroup_account_extent+0xda0/0xda0 [btrfs] [372.620960] ? do_raw_spin_lock+0x11e/0x250 [372.627137] ? rwlock_bug.part.0+0x90/0x90 [372.633215] ? lock_is_held_type+0xe4/0x140 [372.639404] btrfs_work_helper+0x1ae/0xa90 [btrfs] [372.646268] process_one_work+0x7e9/0x1320 [372.652321] ? lock_release+0x6d0/0x6d0 [372.658081] ? pwq_dec_nr_in_flight+0x230/0x230 [372.664513] ? rwlock_bug.part.0+0x90/0x90 [372.670529] worker_thread+0x59e/0xf90 [372.676172] ? process_one_work+0x1320/0x1320 [372.682440] kthread+0x3b9/0x490 [372.687550] ? _raw_spin_unlock_irq+0x24/0x50 [372.693811] ? set_kthread_struct+0x100/0x100 [372.700052] ret_from_fork+0x22/0x30 [372.705517] </TASK> [372.709747] INFO: task btrfs-transacti:2347 blocked for more than 123 seconds. [372.729827] Not tainted 5.16.0-rc8 #7 [372.745907] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [372.767106] task:btrfs-transacti state:D stack: 0 pid: 2347 ppid: 2 flags:0x00004000 [372.787776] Call Trace: [372.801652] <TASK> [372.812961] __schedule+0xb56/0x4850 [372.830011] ? io_schedule_timeout+0x190/0x190 [372.852547] ? lockdep_hardirqs_on+0x7e/0x100 [372.871761] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [372.886792] schedule+0xe0/0x270 [372.901685] wait_current_trans+0x22c/0x310 [btrfs] [372.919743] ? btrfs_put_transaction+0x3d0/0x3d0 [btrfs] [372.938923] ? finish_wait+0x270/0x270 [372.959085] ? join_transaction+0xc75/0xe30 [btrfs] [372.977706] start_transaction+0x938/0x10a0 [btrfs] [372.997168] transaction_kthread+0x19d/0x3c0 [btrfs] [373.013021] ? btrfs_cleanup_transaction.isra.0+0xfc0/0xfc0 [btrfs] [373.031678] kthread+0x3b9/0x490 [373.047420] ? _raw_spin_unlock_irq+0x24/0x50 [373.064645] ? set_kthread_struct+0x100/0x100 [373.078571] ret_from_fork+0x22/0x30 [373.091197] </TASK> [373.105611] INFO: task btrfs:3145 blocked for more than 123 seconds. [373.114147] Not tainted 5.16.0-rc8 #7 [373.120401] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [373.130393] task:btrfs state:D stack: 0 pid: 3145 ppid: 3141 flags:0x00004000 [373.140998] Call Trace: [373.145501] <TASK> [373.149654] __schedule+0xb56/0x4850 [373.155306] ? io_schedule_timeout+0x190/0x190 [373.161965] ? lockdep_hardirqs_on+0x7e/0x100 [373.168469] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [373.175468] schedule+0xe0/0x270 [373.180814] wait_for_commit+0x104/0x150 [btrfs] [373.187643] ? test_and_set_bit+0x20/0x20 [btrfs] [373.194772] ? kmem_cache_free+0x124/0x550 [373.201191] ? btrfs_put_transaction+0x69/0x3d0 [btrfs] [373.208738] ? finish_wait+0x270/0x270 [373.214704] ? __btrfs_end_transaction+0x347/0x7b0 [btrfs] [373.222342] btrfs_commit_transaction+0x44d/0x2610 [btrfs] [373.230233] ? join_transaction+0x255/0xe30 [btrfs] [373.237334] ? btrfs_record_root_in_trans+0x4d/0x170 [btrfs] [373.245251] ? btrfs_apply_pending_changes+0x50/0x50 [btrfs] [373.253296] relocate_block_group+0x105/0xc20 [btrfs] [373.260533] ? mutex_lock_io_nested+0x1270/0x1270 [373.267516] ? btrfs_wait_nocow_writers+0x85/0x180 [btrfs] [373.275155] ? merge_reloc_roots+0x710/0x710 [btrfs] [373.283602] ? btrfs_wait_ordered_extents+0xd30/0xd30 [btrfs] [373.291934] ? kmem_cache_free+0x124/0x550 [373.298180] btrfs_relocate_block_group+0x35c/0x930 [btrfs] [373.306047] btrfs_relocate_chunk+0x85/0x210 [btrfs] [373.313229] btrfs_balance+0x12f4/0x2d20 [btrfs] [373.320227] ? lock_release+0x3a9/0x6d0 [373.326206] ? btrfs_relocate_chunk+0x210/0x210 [btrfs] [373.333591] ? lock_is_held_type+0xe4/0x140 [373.340031] ? rcu_read_lock_sched_held+0x3f/0x70 [373.346910] btrfs_ioctl_balance+0x548/0x700 [btrfs] [373.354207] btrfs_ioctl+0x7f2/0x71b0 [btrfs] [373.360774] ? lockdep_hardirqs_on_prepare+0x410/0x410 [373.367957] ? lockdep_hardirqs_on_prepare+0x410/0x410 [373.375327] ? btrfs_ioctl_get_supported_features+0x20/0x20 [btrfs] [373.383841] ? find_held_lock+0x2c/0x110 [373.389993] ? lock_release+0x3a9/0x6d0 [373.395828] ? mntput_no_expire+0xf7/0xad0 [373.402083] ? lock_is_held_type+0xe4/0x140 [373.408249] ? vfs_fileattr_set+0x9f0/0x9f0 [373.414486] ? selinux_file_ioctl+0x349/0x4e0 [373.420938] ? trace_raw_output_lock+0xb4/0xe0 [373.427442] ? selinux_inode_getsecctx+0x80/0x80 [373.434224] ? lockdep_hardirqs_on+0x7e/0x100 [373.440660] ? force_qs_rnp+0x2a0/0x6b0 [373.446534] ? lock_is_held_type+0x9b/0x140 [373.452763] ? __blkcg_punt_bio_submit+0x1b0/0x1b0 [373.459732] ? security_file_ioctl+0x50/0x90 [373.466089] __x64_sys_ioctl+0x127/0x190 [373.472022] do_syscall_64+0x3b/0x90 [373.477513] entry_SYSCALL_64_after_hwframe+0x44/0xae [373.484823] RIP: 0033:0x7f8f4af7e2bb [373.490493] RSP: 002b:00007ffcbf936178 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [373.500197] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8f4af7e2bb [373.509451] RDX: 00007ffcbf936220 RSI: 00000000c4009420 RDI: 0000000000000003 [373.518659] RBP: 00007ffcbf93774a R08: 0000000000000013 R09: 00007f8f4b02d4e0 [373.527872] R10: 00007f8f4ae87740 R11: 0000000000000246 R12: 0000000000000001 [373.537222] R13: 00007ffcbf936220 R14: 0000000000000000 R15: 0000000000000002 [373.546506] </TASK> [373.550878] INFO: task btrfs:3146 blocked for more than 123 seconds. [373.559383] Not tainted 5.16.0-rc8 #7 [373.565748] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [373.575748] task:btrfs state:D stack: 0 pid: 3146 ppid: 2168 flags:0x00000000 [373.586314] Call Trace: [373.590846] <TASK> [373.595121] __schedule+0xb56/0x4850 [373.600901] ? __lock_acquire+0x23db/0x5030 [373.607176] ? io_schedule_timeout+0x190/0x190 [373.613954] schedule+0xe0/0x270 [373.619157] schedule_timeout+0x168/0x220 [373.625170] ? usleep_range_state+0x150/0x150 [373.631653] ? mark_held_locks+0x9e/0xe0 [373.637767] ? do_raw_spin_lock+0x11e/0x250 [373.643993] ? lockdep_hardirqs_on_prepare+0x17b/0x410 [373.651267] ? _raw_spin_unlock_irq+0x24/0x50 [373.657677] ? lockdep_hardirqs_on+0x7e/0x100 [373.664103] wait_for_completion+0x163/0x250 [373.670437] ? bit_wait_timeout+0x160/0x160 [373.676585] btrfs_quota_disable+0x176/0x9a0 [btrfs] [373.683979] ? btrfs_quota_enable+0x12f0/0x12f0 [btrfs] [373.691340] ? down_write+0xd0/0x130 [373.696880] ? down_write_killable+0x150/0x150 [373.703352] btrfs_ioctl+0x3945/0x71b0 [btrfs] [373.710061] ? find_held_lock+0x2c/0x110 [373.716192] ? lock_release+0x3a9/0x6d0 [373.722047] ? __handle_mm_fault+0x23cd/0x3050 [373.728486] ? btrfs_ioctl_get_supported_features+0x20/0x20 [btrfs] [373.737032] ? set_pte+0x6a/0x90 [373.742271] ? do_raw_spin_unlock+0x55/0x1f0 [373.748506] ? lock_is_held_type+0xe4/0x140 [373.754792] ? vfs_fileattr_set+0x9f0/0x9f0 [373.761083] ? selinux_file_ioctl+0x349/0x4e0 [373.767521] ? selinux_inode_getsecctx+0x80/0x80 [373.774247] ? __up_read+0x182/0x6e0 [373.780026] ? count_memcg_events.constprop.0+0x46/0x60 [373.787281] ? up_write+0x460/0x460 [373.792932] ? security_file_ioctl+0x50/0x90 [373.799232] __x64_sys_ioctl+0x127/0x190 [373.805237] do_syscall_64+0x3b/0x90 [373.810947] entry_SYSCALL_64_after_hwframe+0x44/0xae [373.818102] RIP: 0033:0x7f1383ea02bb [373.823847] RSP: 002b:00007fffeb4d71f8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [373.833641] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1383ea02bb [373.842961] RDX: 00007fffeb4d7210 RSI: 00000000c0109428 RDI: 0000000000000003 [373.852179] RBP: 0000000000000003 R08: 0000000000000003 R09: 0000000000000078 [373.861408] R10: 00007f1383daec78 R11: 0000000000000202 R12: 00007fffeb4d874a [373.870647] R13: 0000000000493099 R14: 0000000000000001 R15: 0000000000000000 [373.879838] </TASK> [373.884018] Showing all locks held in the system: [373.894250] 3 locks held by kworker/4:1/58: [373.900356] 1 lock held by khungtaskd/63: [373.906333] #0: ffffffff8945ff60 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 [373.917307] 3 locks held by kworker/u16:6/103: [373.923938] #0: ffff888127b4f138 ((wq_completion)btrfs-qgroup-rescan){+.+.}-{0:0}, at: process_one_work+0x712/0x1320 [373.936555] #1: ffff88810b817dd8 ((work_completion)(&work->normal_work)){+.+.}-{0:0}, at: process_one_work+0x73f/0x1320 [373.951109] #2: ffff888102dd4650 (sb_internal#2){.+.+}-{0:0}, at: btrfs_qgroup_rescan_worker+0x1f6/0x10c0 [btrfs] [373.964027] 2 locks held by less/1803: [373.969982] #0: ffff88813ed56098 (&tty->ldisc_sem){++++}-{0:0}, at: tty_ldisc_ref_wait+0x24/0x80 [373.981295] #1: ffffc90000b3b2e8 (&ldata->atomic_read_lock){+.+.}-{3:3}, at: n_tty_read+0x9e2/0x1060 [373.992969] 1 lock held by btrfs-transacti/2347: [373.999893] #0: ffff88813d4887a8 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0xe3/0x3c0 [btrfs] [374.015872] 3 locks held by btrfs/3145: [374.022298] #0: ffff888102dd4460 (sb_writers#18){.+.+}-{0:0}, at: btrfs_ioctl_balance+0xc3/0x700 [btrfs] [374.034456] #1: ffff88813d48a0a0 (&fs_info->reclaim_bgs_lock){+.+.}-{3:3}, at: btrfs_balance+0xfe5/0x2d20 [btrfs] [374.047646] #2: ffff88813d488838 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_relocate_block_group+0x354/0x930 [btrfs] [374.063295] 4 locks held by btrfs/3146: [374.069647] #0: ffff888102dd4460 (sb_writers#18){.+.+}-{0:0}, at: btrfs_ioctl+0x38b1/0x71b0 [btrfs] [374.081601] #1: ffff88813d488bb8 (&fs_info->subvol_sem){+.+.}-{3:3}, at: btrfs_ioctl+0x38fd/0x71b0 [btrfs] [374.094283] #2: ffff888102dd4650 (sb_internal#2){.+.+}-{0:0}, at: btrfs_quota_disable+0xc8/0x9a0 [btrfs] [374.106885] #3: ffff88813d489800 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}, at: btrfs_quota_disable+0xd5/0x9a0 [btrfs] [374.126780] ============================================= To avoid the deadlock, wait for the qgroup rescan worker to complete before starting the transaction for the quota disable ioctl. Clear BTRFS_FS_QUOTA_ENABLE flag before the wait and the transaction to request the worker to complete. On transaction start failure, set the BTRFS_FS_QUOTA_ENABLE flag again. These BTRFS_FS_QUOTA_ENABLE flag changes can be done safely since the function btrfs_quota_disable is not called concurrently because of fs_info->subvol_sem. Also check the BTRFS_FS_QUOTA_ENABLE flag in qgroup_rescan_init to avoid another qgroup rescan worker to start after the previous qgroup worker completed. CC: stable@vger.kernel.org # 5.4+ Suggested-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Qu Wenruo authored
commit 2d192fc4 upstream. [BUG] The following super simple script would crash btrfs at unmount time, if CONFIG_BTRFS_ASSERT() is set. mkfs.btrfs -f $dev mount $dev $mnt xfs_io -f -c "pwrite 0 4k" $mnt/file umount $mnt mount -r ro $dev $mnt btrfs scrub start -Br $mnt umount $mnt This will trigger the following ASSERT() introduced by commit 0a31daa4 ("btrfs: add assertion for empty list of transactions at late stage of umount"). That patch is definitely not the cause, it just makes enough noise for developers. [CAUSE] We will start transaction for the following call chain during scrub: scrub_enumerate_chunks() |- btrfs_inc_block_group_ro() |- btrfs_join_transaction() However for RO mount, there is no running transaction at all, thus btrfs_join_transaction() will start a new transaction. Furthermore, since it's read-only mount, btrfs_sync_fs() will not call btrfs_commit_super() to commit the new but empty transaction. And leads to the ASSERT(). The bug has been there for a long time. Only the new ASSERT() makes it noisy enough to be noticed. [FIX] For read-only scrub on read-only mount, there is no need to start a transaction nor to allocate new chunks in btrfs_inc_block_group_ro(). Just do extra read-only mount check in btrfs_inc_block_group_ro(), and if it's read-only, skip all chunk allocation and go inc_block_group_ro() directly. CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christian Lachner authored
commit ea354196 upstream. This commit switches the Gigabyte X570 Aorus Xtreme from using the ALC1220_FIXUP_CLEVO_P950 to the ALC1220_FIXUP_GB_X570 quirk. This fixes the no-audio after reboot from windows problem. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275 Signed-off-by: Christian Lachner <gladiac@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220129113243.93068-4-gladiac@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christian Lachner authored
commit 41a86013 upstream. Newer versions of the X570 Master come with a newer revision of the mainboard chipset - the X570S. These boards have the same ALC1220 codec but seem to initialize the codec with a different parameter in Coef 0x7 which causes the output audio to be very low. We therefore write a known-good value to Coef 0x7 to fix that. As the value is the exact same as on the other X570(non-S) boards the same quirk-function can be shared between both generations. This commit adds the Gigabyte X570S Aorus Master to the list of boards using the ALC1220_FIXUP_GB_X570 quirk. This fixes both, the silent output and the no-audio after reboot from windows problems. This work has been tested by the folks over at the level1techs forum here: https://forum.level1techs.com/t/has-anybody-gotten-audio-working-in-linux-on-aorus-x570-master/154072 Signed-off-by: Christian Lachner <gladiac@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220129113243.93068-3-gladiac@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christian Lachner authored
commit 63394a16 upstream. The initial commit of the new Gigabyte X570 ALC1220 quirks lacked the fixup-model entry in alc882_fixup_models[]. It seemed not to cause any ill effects but for completeness sake this commit makes up for that. Signed-off-by: Christian Lachner <gladiac@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220129113243.93068-2-gladiac@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Albert Geantă authored
commit 94db9cc8 upstream. The ASUS GU603 (Zephyrus M16 - SSID 1043:16b2) requires a quirk similar to other ASUS devices for correctly routing the 4 integrated speakers. This fixes it by adding a corresponding quirk entry, which connects the bass speakers to the proper DAC. Signed-off-by: Albert Geantă <albertgeanta@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220131010523.546386-1-albertgeanta@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit b837a9f5 upstream. The COEF access is done with two steps: setting the index then read or write the data. When multiple COEF accesses are performed concurrently, the index and data might be paired unexpectedly. In most cases, this isn't a big problem as the COEF setup is done at the initialization, but some dynamic changes like the mute LED may hit such a race. For avoiding the racy COEF accesses, this patch introduces a new mutex coef_mutex to alc_spec, and wrap the COEF accessing functions with it. Reported-by: Alexander Sergeyev <sergeev917@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220111195229.a77wrpjclqwrx4bx@localhost.localdomain Link: https://lore.kernel.org/r/20220131075738.24323-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 549f8ffc upstream. The LED class devices that are created by HD-audio codec drivers are registered via devm_led_classdev_register() and associated with the HD-audio codec device. Unfortunately, it turned out that the devres release doesn't work for this case; namely, since the codec resource release happens before the devm call chain, it triggers a NULL dereference or a UAF for a stale set_brightness_delay callback. For fixing the bug, this patch changes the LED class device register and unregister in a manual manner without devres, keeping the instances in hda_gen_spec. Reported-by: Alexander Sergeyev <sergeev917@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220111195229.a77wrpjclqwrx4bx@localhost.localdomain Link: https://lore.kernel.org/r/20220126145011.16728-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jonas Hahnfeld authored
commit 4ee02e20 upstream. This device provides both audio and video. The original quirk added in commit 48827e1d ("ALSA: usb-audio: Add quirk for VF0770") used USB_DEVICE to match the vendor and product ID. Depending on module order, if snd-usb-audio was asked first, it would match the entire device and uvcvideo wouldn't get to see it. Change the matching to USB_AUDIO_DEVICE to restore uvcvideo matching in all cases. Fixes: 48827e1d ("ALSA: usb-audio: Add quirk for VF0770") Reported-by: Jukka Heikintalo <heikintalo.jukka@gmail.com> Tested-by: Jukka Heikintalo <heikintalo.jukka@gmail.com> Reported-by: Paweł Susicki <pawel.susicki@gmail.com> Tested-by: Paweł Susicki <pawel.susicki@gmail.com> Cc: <stable@vger.kernel.org> # 5.4, 5.10, 5.14, 5.15 Signed-off-by: Jonas Hahnfeld <hahnjo@hahnjo.de> Link: https://lore.kernel.org/r/20220131183516.61191-1-hahnjo@hahnjo.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Brown authored
commit 4cf28e9a upstream. We don't currently validate that the values being set are within the range we advertised to userspace as being valid, do so and reject any values that are out of range. Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220124153253.3548853-4-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Brown authored
commit 4f1e50d6 upstream. We don't currently validate that the values being set are within the range we advertised to userspace as being valid, do so and reject any values that are out of range. Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220124153253.3548853-3-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mark Brown authored
commit 817f7c93 upstream. We don't currently validate that the values being set are within the range we advertised to userspace as being valid, do so and reject any values that are out of range. Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220124153253.3548853-2-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Osipenko authored
commit 06feec60 upstream. Correct size of iec_status array by changing it to the size of status array of the struct snd_aes_iec958. This fixes out-of-bounds slab read accesses made by memcpy() of the hdmi-codec driver. This problem is reported by KASAN. Cc: stable@vger.kernel.org Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20220112195039.1329-1-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Patrice Chotard authored
commit e4d63473 upstream. Some device driver need to communicate to qspi device during the remove process, qspi controller must be functional when spi_unregister_master() is called. To ensure this, replace devm_spi_register_master() by spi_register_master() and spi_unregister_master() is called directly in .remove callback before stopping the qspi controller. This issue was put in evidence using kernel v5.11 and later with a spi-nor which supports the software reset feature introduced by commit d73ee753 ("mtd: spi-nor: core: perform a Soft Reset on shutdown") Fixes: c530cd1d ("spi: spi-mem: add stm32 qspi controller") Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: <stable@vger.kernel.org> # 5.8.x Reviewed-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/20220117121744.29729-1-patrice.chotard@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Minghao Chi authored
commit 520ba724 upstream. We can't call kvfree() with a spin lock held, so defer it. Link: https://lkml.kernel.org/r/20211223031207.556189-1-chi.minghao@zte.com.cn Fixes: fc37a3b8 ("[PATCH] ipc sem: use kvmalloc for sem_undo allocation") Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Manfred Spraul <manfred@colorfullife.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Yang Guang <cgel.zte@gmail.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com> Cc: Vasily Averin <vvs@virtuozzo.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Moore authored
commit f26d0433 upstream. When an admin enables audit at early boot via the "audit=1" kernel command line the audit queue behavior is slightly different; the audit subsystem goes to greater lengths to avoid dropping records, which unfortunately can result in problems when the audit daemon is forcibly stopped for an extended period of time. This patch makes a number of changes designed to improve the audit queuing behavior so that leaving the audit daemon in a stopped state for an extended period does not cause a significant impact to the system. - kauditd_send_queue() is now limited to looping through the passed queue only once per call. This not only prevents the function from looping indefinitely when records are returned to the current queue, it also allows any recovery handling in kauditd_thread() to take place when kauditd_send_queue() returns. - Transient netlink send errors seen as -EAGAIN now cause the record to be returned to the retry queue instead of going to the hold queue. The intention of the hold queue is to store, perhaps for an extended period of time, the events which led up to the audit daemon going offline. The retry queue remains a temporary queue intended to protect against transient issues between the kernel and the audit daemon. - The retry queue is now limited by the audit_backlog_limit setting, the same as the other queues. This allows admins to bound the size of all of the audit queues on the system. - kauditd_rehold_skb() now returns records to the end of the hold queue to ensure ordering is preserved in the face of recent changes to kauditd_send_queue(). Cc: stable@vger.kernel.org Fixes: 5b52330b ("audit: fix auditd/kernel connection state tracking") Fixes: f4b3ee3c ("audit: improve robustness of the audit queue handling") Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com> Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vratislav Bendel authored
commit 186edf7e upstream. On error path from cond_read_list() and duplicate_policydb_cond_list() the cond_list_destroy() gets called a second time in caller functions, resulting in NULL pointer deref. Fix this by resetting the cond_list_len to 0 in cond_list_destroy(), making subsequent calls a noop. Also consistently reset the cond_list pointer to NULL after freeing. Cc: stable@vger.kernel.org Signed-off-by: Vratislav Bendel <vbendel@redhat.com> [PM: fix line lengths in the description] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ville Syrjälä authored
commit 99510e1a upstream. Turns out the DSB has trouble correctly loading the gamma LUT. From a cursory look maybe like some entries do not load properly, or they get loaded with some gibberish. Unfortunately our current kms_color/etc. tests do not seem to catch this. I had a brief look at the generated DSB batch and it looked correct. Tried a few quick tricks like writing the index register twice/etc. but didn't see any improvement. Also tried switching to the 10bit gamma mode in case there is yet another issue with the multi-segment mode, but even the 10bit mode was showing issues. Switching to mmio fixes all of it. I suppose one theory is that maybe the DSB bangs on the LUT too quickly and it can't keep up and instead some data either gets dropped or corrupted. To confirm that someone should try to slow down the DSB's progress a bit. Another thought was that maybe the LUT has crappy dual porting and you get contention if you try to load it during active scanout. But why then would the mmio path work, unless it's just sufficiently slow? Whatever the case, this is currently busted so let's disable it until we get to the root of the problem. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3916 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211014181856.17581-2-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com> Cc: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Feb 06, 2022
-
-
Greg Kroah-Hartman authored
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
This reverts commit fbe1e801 which is commit 20b0dfa8 upstream. It wasn't applied correctly, something went wrong with an attempt to fix it up again, so just revert the whole thing to be back at a clean state. Reported-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220205171238.GA3073350@roeck-us.net Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Link: https://lore.kernel.org/r/Yf5lNIJnvhP4ajam@kroah.com Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Cc: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
This reverts commit d5e81e3a which is commit 20b0dfa8 upstream. It wasn't applied correctly, something went wrong with an attempt to fix it up again, so just revert the whole thing to be back at a clean state. Reported-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220205171238.GA3073350@roeck-us.net Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Link: https://lore.kernel.org/r/Yf5lNIJnvhP4ajam@kroah.com Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Cc: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Feb 05, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220204091915.247906930@linuxfoundation.org Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Justin M. Forbes <jforbes@fedoraproject.org> Tested-by: Fox Chen <foxhlchen@gmail.com> Tested-by: Slade Watkins <slade@sladewatkins.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christoph Fritz authored
commit 4ee7e4a6 upstream. This patch is fixing a NULL pointer dereference to get a recently introduced warning message working. Fixes: 5b0a414d ("ovl: fix filattr copy-up failure") Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Cc: <stable@vger.kernel.org> # v5.15 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
commit b67985be upstream. tcp_shift_skb_data() might collapse three packets into a larger one. P_A, P_B, P_C -> P_ABC Historically, it used a single tcp_skb_can_collapse_to(P_A) call, because it was enough. In commit 85712484 ("tcp: coalesce/collapse must respect MPTCP extensions"), this call was replaced by a call to tcp_skb_can_collapse(P_A, P_B) But the now needed test over P_C has been missed. This probably broke MPTCP. Then later, commit 9b65b17d ("net: avoid double accounting for pure zerocopy skbs") added an extra condition to tcp_skb_can_collapse(), but the missing call from tcp_shift_skb_data() is also breaking TCP zerocopy, because P_A and P_C might have different skb_zcopy_pure() status. Fixes: 85712484 ("tcp: coalesce/collapse must respect MPTCP extensions") Fixes: 9b65b17d ("net: avoid double accounting for pure zerocopy skbs") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Mat Martineau <mathew.j.martineau@linux.intel.com> Cc: Talal Ahmad <talalahmad@google.com> Cc: Arjun Roy <arjunroy@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20220201184640.756716-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
commit e42e70ad upstream. When packet_setsockopt( PACKET_FANOUT_DATA ) reads po->fanout, no lock is held, meaning that another thread can change po->fanout. Given that po->fanout can only be set once during the socket lifetime (it is only cleared from fanout_release()), we can use READ_ONCE()/WRITE_ONCE() to document the race. BUG: KCSAN: data-race in packet_setsockopt / packet_setsockopt write to 0xffff88813ae8e300 of 8 bytes by task 14653 on cpu 0: fanout_add net/packet/af_packet.c:1791 [inline] packet_setsockopt+0x22fe/0x24a0 net/packet/af_packet.c:3931 __sys_setsockopt+0x209/0x2a0 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88813ae8e300 of 8 bytes by task 14654 on cpu 1: packet_setsockopt+0x691/0x24a0 net/packet/af_packet.c:3935 __sys_setsockopt+0x209/0x2a0 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000000000000000 -> 0xffff888106f8c000 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 14654 Comm: syz-executor.3 Not tainted 5.16.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 47dceb8e ("packet: add classic BPF fanout mode") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220201022358.330621-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sasha Neftin authored
commit cad014b7 upstream. Handshake with CSME/AMT on none provisioned platforms during S0ix flow is not supported on TGL platform and can cause to HW unit hang. Update the handshake with CSME flow to start from the ADL platform. Fixes: 3e55d231 ("e1000e: Add handshake with the CSME to support S0ix") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tianchen Ding authored
commit c80d401c upstream. subparts_cpus should be limited as a subset of cpus_allowed, but it is updated wrongly by using cpumask_andnot(). Use cpumask_and() instead to fix it. Fixes: ee8dde0c ("cpuset: Add new v2 cpuset.sched.partition flag") Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com> Reviewed-by: Waiman Long <longman@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
commit c6f6f244 upstream. While looking at one unrelated syzbot bug, I found the replay logic in __rtnl_newlink() to potentially trigger use-after-free. It is better to clear master_dev and m_ops inside the loop, in case we have to replay it. Fixes: ba7d49b1 ("rtnetlink: provide api for getting and setting slave info") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20220201012106.216495-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
commit 04c2a47f upstream. Whenever tc_new_tfilter() jumps back to replay: label, we need to make sure @q and @chain local variables are cleared again, or risk use-after-free as in [1] For consistency, apply the same fix in tc_ctl_chain() BUG: KASAN: use-after-free in mini_qdisc_pair_swap+0x1b9/0x1f0 net/sched/sch_generic.c:1581 Write of size 8 at addr ffff8880985c4b08 by task syz-executor.4/1945 CPU: 0 PID: 1945 Comm: syz-executor.4 Not tainted 5.17.0-rc1-syzkaller-00495-gff58831fa02d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 mini_qdisc_pair_swap+0x1b9/0x1f0 net/sched/sch_generic.c:1581 tcf_chain_head_change_item net/sched/cls_api.c:372 [inline] tcf_chain0_head_change.isra.0+0xb9/0x120 net/sched/cls_api.c:386 tcf_chain_tp_insert net/sched/cls_api.c:1657 [inline] tcf_chain_tp_insert_unique net/sched/cls_api.c:1707 [inline] tc_new_tfilter+0x1e67/0x2350 net/sched/cls_api.c:2086 rtnetlink_rcv_msg+0x80d/0xb80 net/core/rtnetlink.c:5583 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x331/0x810 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmmsg+0x195/0x470 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f2647172059 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f2645aa5168 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00007f2647285100 RCX: 00007f2647172059 RDX: 040000000000009f RSI: 00000000200002c0 RDI: 0000000000000006 RBP: 00007f26471cc08d R08: 0000000000000000 R09: 0000000000000000 R10: 9e00000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffb3f7f02f R14: 00007f2645aa5300 R15: 0000000000022000 </TASK> Allocated by task 1944: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:436 [inline] ____kasan_kmalloc mm/kasan/common.c:515 [inline] ____kasan_kmalloc mm/kasan/common.c:474 [inline] __kasan_kmalloc+0xa9/0xd0 mm/kasan/common.c:524 kmalloc_node include/linux/slab.h:604 [inline] kzalloc_node include/linux/slab.h:726 [inline] qdisc_alloc+0xac/0xa10 net/sched/sch_generic.c:941 qdisc_create.constprop.0+0xce/0x10f0 net/sched/sch_api.c:1211 tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5592 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x331/0x810 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmmsg+0x195/0x470 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 3609: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:45 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free+0x130/0x160 mm/kasan/common.c:328 kasan_slab_free include/linux/kasan.h:236 [inline] slab_free_hook mm/slub.c:1728 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1754 slab_free mm/slub.c:3509 [inline] kfree+0xcb/0x280 mm/slub.c:4562 rcu_do_batch kernel/rcu/tree.c:2527 [inline] rcu_core+0x7b8/0x1540 kernel/rcu/tree.c:2778 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 Last potentially related work creation: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 __kasan_record_aux_stack+0xbe/0xd0 mm/kasan/generic.c:348 __call_rcu kernel/rcu/tree.c:3026 [inline] call_rcu+0xb1/0x740 kernel/rcu/tree.c:3106 qdisc_put_unlocked+0x6f/0x90 net/sched/sch_generic.c:1109 tcf_block_release+0x86/0x90 net/sched/cls_api.c:1238 tc_new_tfilter+0xc0d/0x2350 net/sched/cls_api.c:2148 rtnetlink_rcv_msg+0x80d/0xb80 net/core/rtnetlink.c:5583 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x331/0x810 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmmsg+0x195/0x470 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff8880985c4800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 776 bytes inside of 1024-byte region [ffff8880985c4800, ffff8880985c4c00) The buggy address belongs to the page: page:ffffea0002617000 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x985c0 head:ffffea0002617000 order:3 compound_mapcount:0 compound_pincount:0 flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000010200 0000000000000000 dead000000000122 ffff888010c41dc0 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 3, migratetype Unmovable, gfp_mask 0x1d20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_HARDWALL), pid 1941, ts 1038999441284, free_ts 1033444432829 prep_new_page mm/page_alloc.c:2434 [inline] get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389 alloc_pages+0x1aa/0x310 mm/mempolicy.c:2271 alloc_slab_page mm/slub.c:1799 [inline] allocate_slab mm/slub.c:1944 [inline] new_slab+0x28a/0x3b0 mm/slub.c:2004 ___slab_alloc+0x87c/0xe90 mm/slub.c:3018 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3105 slab_alloc_node mm/slub.c:3196 [inline] slab_alloc mm/slub.c:3238 [inline] __kmalloc+0x2fb/0x340 mm/slub.c:4420 kmalloc include/linux/slab.h:586 [inline] kzalloc include/linux/slab.h:715 [inline] __register_sysctl_table+0x112/0x1090 fs/proc/proc_sysctl.c:1335 neigh_sysctl_register+0x2c8/0x5e0 net/core/neighbour.c:3787 devinet_sysctl_register+0xb1/0x230 net/ipv4/devinet.c:2618 inetdev_init+0x286/0x580 net/ipv4/devinet.c:278 inetdev_event+0xa8a/0x15d0 net/ipv4/devinet.c:1532 notifier_call_chain+0xb5/0x200 kernel/notifier.c:84 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1919 call_netdevice_notifiers_extack net/core/dev.c:1931 [inline] call_netdevice_notifiers net/core/dev.c:1945 [inline] register_netdevice+0x1073/0x1500 net/core/dev.c:9698 veth_newlink+0x59c/0xa90 drivers/net/veth.c:1722 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1352 [inline] free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1404 free_unref_page_prepare mm/page_alloc.c:3325 [inline] free_unref_page+0x19/0x690 mm/page_alloc.c:3404 release_pages+0x748/0x1220 mm/swap.c:956 tlb_batch_pages_flush mm/mmu_gather.c:50 [inline] tlb_flush_mmu_free mm/mmu_gather.c:243 [inline] tlb_flush_mmu+0xe9/0x6b0 mm/mmu_gather.c:250 zap_pte_range mm/memory.c:1441 [inline] zap_pmd_range mm/memory.c:1490 [inline] zap_pud_range mm/memory.c:1519 [inline] zap_p4d_range mm/memory.c:1540 [inline] unmap_page_range+0x1d1d/0x2a30 mm/memory.c:1561 unmap_single_vma+0x198/0x310 mm/memory.c:1606 unmap_vmas+0x16b/0x2f0 mm/memory.c:1638 exit_mmap+0x201/0x670 mm/mmap.c:3178 __mmput+0x122/0x4b0 kernel/fork.c:1114 mmput+0x56/0x60 kernel/fork.c:1135 exit_mm kernel/exit.c:507 [inline] do_exit+0xa3c/0x2a30 kernel/exit.c:793 do_group_exit+0xd2/0x2f0 kernel/exit.c:935 __do_sys_exit_group kernel/exit.c:946 [inline] __se_sys_exit_group kernel/exit.c:944 [inline] __x64_sys_exit_group+0x3a/0x50 kernel/exit.c:944 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Memory state around the buggy address: ffff8880985c4a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880985c4a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880985c4b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880985c4b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880985c4c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 470502de ("net: sched: unlock rules update API") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Buslov <vladbu@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220131172018.3704490-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit ee125951 upstream. This code calls fd_install() which gives the userspace access to the fd. Then if copy_info_records_to_user() fails it calls put_unused_fd(fd) but that will not release it and leads to a stale entry in the file descriptor table. Generally you can't trust the fd after a call to fd_install(). The fix is to delay the fd_install() until everything else has succeeded. Fortunately it requires CAP_SYS_ADMIN to reach this code so the security impact is less. Fixes: f644bc44 ("fanotify: fix copy_event_to_user() fid error clean up") Link: https://lore.kernel.org/r/20220128195656.GA26981@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mathias Krause <minipli@grsecurity.net> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shyam Sundar S K authored
commit 5aac9108 upstream. There will be BUG_ON() triggered in include/linux/skbuff.h leading to intermittent kernel panic, when the skb length underflow is detected. Fix this by dropping the packet if such length underflows are seen because of inconsistencies in the hardware descriptors. Fixes: 622c36f1 ("amd-xgbe: Fix jumbo MTU processing on newer hardware") Suggested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20220127092003.2812745-1-Shyam-sundar.S-k@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Raju Rangoju authored
commit 7674b7b5 upstream. Ensure to reset the tx_timer_active flag in xgbe_stop(), otherwise a port restart may result in tx timeout due to uncleared flag. Fixes: c635eaac ("amd-xgbe: Remove Tx coalescing") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20220127060222.453371-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Karen Sornek authored
commit 6533e558 upstream. Fix the crash in kernel while dereferencing the NULL pointer, when the driver is unloaded and simultaneously the VSI rings are being stopped. The hardware requires 50msec in order to finish RX queues disable. For this purpose the driver spins in mdelay function for the operation to be completed. For example changing number of queues which requires reset would fail in the following call stack: 1) i40e_prep_for_reset 2) i40e_pf_quiesce_all_vsi 3) i40e_quiesce_vsi 4) i40e_vsi_close 5) i40e_down 6) i40e_vsi_stop_rings 7) i40e_vsi_control_rx -> disable requires the delay of 50msecs 8) continue back in i40e_down function where i40e_clean_tx_ring(vsi->tx_rings[i]) is going to crash When the driver was spinning vsi_release called i40e_vsi_free_arrays where the vsi->tx_rings resources were freed and the pointer was set to NULL. Fixes: 5b6d4a7f ("i40e: Fix crash during removing i40e driver") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jedrzej Jagielski authored
commit 3d250466 upstream. There was an AQ error I40E_AQ_RC_EINVAL when trying to reset bw limit as part of bw allocation setup. This was caused by trying to reset bw limit with DCB enabled. Bw limit should not be reset when DCB is enabled. The code was relying on the pf->flags to check if DCB is enabled but if only 1 TC is available this flag will not be set even though DCB is enabled. Add a check for number of TC and if it is 1 don't try to reset bw limit even if pf->flags shows DCB as disabled. Fixes: fa38e30a ("i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled") Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com> # Flatten the condition Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Georgi Valkov authored
commit 63e4b45c upstream. When rx_buf is allocated we need to account for IPHETH_IP_ALIGN, which reduces the usable size by 2 bytes. Otherwise we have 1512 bytes usable instead of 1514, and if we receive more than 1512 bytes, ipheth_rcvbulk_callback is called with status -EOVERFLOW, after which the driver malfunctiones and all communication stops. Resolves ipheth 2-1:4.2: ipheth_rcvbulk_callback: urb status: -75 Fixes: f33d9e2b ("usbnet: ipheth: fix connectivity with iOS 14") Signed-off-by: Georgi Valkov <gvalkov@abv.bg> Tested-by: Jan Kiszka <jan.kiszka@siemens.com> Link: https://lore.kernel.org/all/B60B8A4B-92A0-49B3-805D-809A2433B46C@abv.bg/ Link: https://lore.kernel.org/all/24851bd2769434a5fc24730dce8e8a984c5a4505.1643699778.git.jan.kiszka@siemens.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maor Dickman authored
commit d8e5883d upstream. The variable modact is not initialized before used in command modify header allocation which can cause command to fail. Fix by initializing modact with zeros. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 8f1e0b97 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Roi Dayan authored
commit 880b5176 upstream. When changing mode to switchdev, rep bridge init registered to netdevice notifier holds the devlink lock and then takes pernet_ops_rwsem. At that time deleting a netns holds pernet_ops_rwsem and then takes the devlink lock. Example sequence is: $ ip netns add foo $ devlink dev eswitch set pci/0000:00:08.0 mode switchdev & $ ip netns del foo deleting netns trace: [ 1185.365555] ? devlink_pernet_pre_exit+0x74/0x1c0 [ 1185.368331] ? mutex_lock_io_nested+0x13f0/0x13f0 [ 1185.370984] ? xt_find_table+0x40/0x100 [ 1185.373244] ? __mutex_lock+0x24a/0x15a0 [ 1185.375494] ? net_generic+0xa0/0x1c0 [ 1185.376844] ? wait_for_completion_io+0x280/0x280 [ 1185.377767] ? devlink_pernet_pre_exit+0x74/0x1c0 [ 1185.378686] devlink_pernet_pre_exit+0x74/0x1c0 [ 1185.379579] ? devlink_nl_cmd_get_dumpit+0x3a0/0x3a0 [ 1185.380557] ? xt_find_table+0xda/0x100 [ 1185.381367] cleanup_net+0x372/0x8e0 changing mode to switchdev trace: [ 1185.411267] down_write+0x13a/0x150 [ 1185.412029] ? down_write_killable+0x180/0x180 [ 1185.413005] register_netdevice_notifier+0x1e/0x210 [ 1185.414000] mlx5e_rep_bridge_init+0x181/0x360 [mlx5_core] [ 1185.415243] mlx5e_uplink_rep_enable+0x269/0x480 [mlx5_core] [ 1185.416464] ? mlx5e_uplink_rep_disable+0x210/0x210 [mlx5_core] [ 1185.417749] mlx5e_attach_netdev+0x232/0x400 [mlx5_core] [ 1185.418906] mlx5e_netdev_attach_profile+0x15b/0x1e0 [mlx5_core] [ 1185.420172] mlx5e_netdev_change_profile+0x15a/0x1d0 [mlx5_core] [ 1185.421459] mlx5e_vport_rep_load+0x557/0x780 [mlx5_core] [ 1185.422624] ? mlx5e_stats_grp_vport_rep_num_stats+0x10/0x10 [mlx5_core] [ 1185.424006] mlx5_esw_offloads_rep_load+0xdb/0x190 [mlx5_core] [ 1185.425277] esw_offloads_enable+0xd74/0x14a0 [mlx5_core] Fix this by registering rep bridges for per net netdev notifier instead of global one, which operats on the net namespace without holding the pernet_ops_rwsem. Fixes: 19e9bfa0 ("net/mlx5: Bridge, add offload infrastructure") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maxim Mikityanskiy authored
commit 736dfe4e upstream. The hardware spec defines max_average_bw == 0 as "unlimited bandwidth". max_average_bw is calculated as `ceil / BYTES_IN_MBIT`, which can become 0 when ceil is small, leading to an undesired effect of having no bandwidth limit. This commit fixes it by rounding up small values of ceil to 1 Mbit/s. Fixes: 214baf22 ("net/mlx5e: Support HTB offload") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dima Chumak authored
commit 55b2ca70 upstream. Only prio 1 is supported for nic mode when there is no ignore flow level support in firmware. But for switchdev mode, which supports fixed number of statically pre-allocated prios, this restriction is not relevant so it can be relaxed. Fixes: d671e109 ("net/mlx5: Fix tc max supported prio for nic mode") Signed-off-by: Dima Chumak <dchumak@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gal Pressman authored
commit 4a08a131 upstream. When querying the module EEPROM, there was a misusage of the 'offset' variable vs the 'query.offset' field. Fix that by always using 'offset' and assigning its value to 'query.offset' right before the mcia register read call. While at it, the cross-pages read size adjustment was changed to be more intuitive. Fixes: e19b0a34 ("net/mlx5: Refactor module EEPROM query") Reported-by: Wang Yugui <wangyugui@e16-tech.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-