- Jan 27, 2014
-
-
Paul Mackerras authored
The DABRX (DABR extension) register on POWER7 processors provides finer control over which accesses cause a data breakpoint interrupt. It contains 3 bits which indicate whether to enable accesses in user, kernel and hypervisor modes respectively to cause data breakpoint interrupts, plus one bit that enables both real mode and virtual mode accesses to cause interrupts. Currently, KVM sets DABRX to allow both kernel and user accesses to cause interrupts while in the guest. This adds support for the guest to specify other values for DABRX. PAPR defines a H_SET_XDABR hcall to allow the guest to set both DABR and DABRX with one call. This adds a real-mode implementation of H_SET_XDABR, which shares most of its code with the existing H_SET_DABR implementation. To support this, we add a per-vcpu field to store the DABRX value plus code to get and set it via the ONE_REG interface. For Linux guests to use this new hcall, userspace needs to add "hcall-xdabr" to the set of strings in the /chosen/hypertas-functions property in the device tree. If userspace does this and then migrates the guest to a host where the kernel doesn't include this patch, then userspace will need to implement H_SET_XDABR by writing the specified DABR value to the DABR using the ONE_REG interface. In that case, the old kernel will set DABRX to DABRX_USER | DABRX_KERNEL. That should still work correctly, at least for Linux guests, since Linux guests cope with getting data breakpoint interrupts in modes that weren't requested by just ignoring the interrupt, and Linux guests never set DABRX_BTI. The other thing this does is to make H_SET_DABR and H_SET_XDABR work on POWER8, which has the DAWR and DAWRX instead of DABR/X. Guests that know about POWER8 should use H_SET_MODE rather than H_SET_[X]DABR, but guests running in POWER7 compatibility mode will still use H_SET_[X]DABR. For them, this adds the logic to convert DABR/X values into DAWR/X values on POWER8. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Paul Mackerras authored
POWER8 has support for hypervisor doorbell interrupts. Though the kernel doesn't use them for IPIs on the powernv platform yet, it probably will in future, so this makes KVM cope gracefully if a hypervisor doorbell interrupt arrives while in a guest. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Paul Mackerras authored
POWER8 has a bit in the LPCR to enable or disable the PURR and SPURR registers to count when in the guest. Set this bit. POWER8 has a field in the LPCR called AIL (Alternate Interrupt Location) which is used to enable relocation-on interrupts. Allow userspace to set this field. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Paul Mackerras authored
* SRR1 wake reason field for system reset interrupt on wakeup from nap is now a 4-bit field on P8, compared to 3 bits on P7. * Set PECEDP in LPCR when napping because of H_CEDE so guest doorbells will wake us up. * Waking up from nap because of a guest doorbell interrupt is not a reason to exit the guest. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Paul Mackerras authored
Currently in book3s_hv_rmhandlers.S we have three places where we have woken up from nap mode and we check the reason field in SRR1 to see what event woke us up. This consolidates them into a new function, kvmppc_check_wake_reason. It looks at the wake reason field in SRR1, and if it indicates that an external interrupt caused the wakeup, calls kvmppc_read_intr to check what sort of interrupt it was. This also consolidates the two places where we synthesize an external interrupt (0x500 vector) for the guest. Now, if the guest exit code finds that there was an external interrupt which has been handled (i.e. it was an IPI indicating that there is now an interrupt pending for the guest), it jumps to deliver_guest_interrupt, which is in the last part of the guest entry code, where we synthesize guest external and decrementer interrupts. That code has been streamlined a little and now clears LPCR[MER] when appropriate as well as setting it. The extra clearing of any pending IPI on a secondary, offline CPU thread before going back to nap mode has been removed. It is no longer necessary now that we have code to read and acknowledge IPIs in the guest exit path. This fixes a minor bug in the H_CEDE real-mode handling - previously, if we found that other threads were already exiting the guest when we were about to go to nap mode, we would branch to the cede wakeup path and end up looking in SRR1 for a wakeup reason. Now we branch to a point after we have checked the wakeup reason. This also fixes a minor bug in kvmppc_read_intr - previously it could return 0xff rather than 1, in the case where we find that a host IPI is pending after we have cleared the IPI. Now it returns 1. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Paul Mackerras authored
This allows us to select architecture 2.05 (POWER6) or 2.06 (POWER7) compatibility modes on a POWER8 processor. (Note that transactional memory is disabled for usermode if either or both of the PCR_TM_DIS and PCR_ARCH_206 bits are set.) Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Michael Ellerman authored
At present this should never happen, since the host kernel sets HFSCR to allow access to all facilities. It's better to be prepared to handle it cleanly if it does ever happen, though. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Paul Mackerras authored
POWER8 has 512 sets in the TLB, compared to 128 for POWER7, so we need to do more tlbiel instructions when flushing the TLB on POWER8. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Michael Neuling authored
This adds fields to the struct kvm_vcpu_arch to store the new guest-accessible SPRs on POWER8, adds code to the get/set_one_reg functions to allow userspace to access this state, and adds code to the guest entry and exit to context-switch these SPRs between host and guest. Note that DPDES (Directed Privileged Doorbell Exception State) is shared between threads on a core; hence we store it in struct kvmppc_vcore and have the master thread save and restore it. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Paul Mackerras authored
On a threaded processor such as POWER7, we group VCPUs into virtual cores and arrange that the VCPUs in a virtual core run on the same physical core. Currently we don't enforce any correspondence between virtual thread numbers within a virtual core and physical thread numbers. Physical threads are allocated starting at 0 on a first-come first-served basis to runnable virtual threads (VCPUs). POWER8 implements a new "msgsndp" instruction which guest kernels can use to interrupt other threads in the same core or sub-core. Since the instruction takes the destination physical thread ID as a parameter, it becomes necessary to align the physical thread IDs with the virtual thread IDs, that is, to make sure virtual thread N within a virtual core always runs on physical thread N. This means that it's possible that thread 0, which is where we call __kvmppc_vcore_entry, may end up running some other vcpu than the one whose task called kvmppc_run_core(), or it may end up running no vcpu at all, if for example thread 0 of the virtual core is currently executing in userspace. However, we do need thread 0 to be responsible for switching the MMU -- a previous version of this patch that had other threads switching the MMU was found to be responsible for occasional memory corruption and machine check interrupts in the guest on POWER7 machines. To accommodate this, we no longer pass the vcpu pointer to __kvmppc_vcore_entry, but instead let the assembly code load it from the PACA. Since the assembly code will need to know the kvm pointer and the thread ID for threads which don't have a vcpu, we move the thread ID into the PACA and we add a kvm pointer to the virtual core structure. In the case where thread 0 has no vcpu to run, it still calls into kvmppc_hv_entry in order to do the MMU switch, and then naps until either its vcpu is ready to run in the guest, or some other thread needs to exit the guest. In the latter case, thread 0 jumps to the code that switches the MMU back to the host. This control flow means that now we switch the MMU before loading any guest vcpu state. Similarly, on guest exit we now save all the guest vcpu state before switching the MMU back to the host. This has required substantial code movement, making the diff rather large. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Michael Neuling authored
POWER8 doesn't have the DABR and DABRX registers; instead it has new DAWR/DAWRX registers, which will be handled in a later patch. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Scott Wood authored
Simplify the handling of lazy EE by going directly from fully-enabled to hard-disabled. This replaces the lazy_irq_pending() check (including its misplaced kvm_guest_exit() call). As suggested by Tiejun Chen, move the interrupt disabling into kvmppc_prepare_to_enter() rather than have each caller do it. Also move the IRQ enabling on heavyweight exit into kvmppc_prepare_to_enter(). Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Mihai Caraman authored
Use gva_t instead of unsigned int for eaddr in deliver_tlb_miss(). Signed-off-by:
Mihai Caraman <mihai.caraman@freescale.com> CC: stable@vger.kernel.org Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Andreas Schwab authored
Signed-off-by:
Andreas Schwab <schwab@linux-m68k.org> CC: stable@vger.kernel.org Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Cédric Le Goater authored
MMIO emulation reads the last instruction executed by the guest and then emulates. If the guest is running in Little Endian order, or more generally in a different endian order of the host, the instruction needs to be byte-swapped before being emulated. This patch adds a helper routine which tests the endian order of the host and the guest in order to decide whether a byteswap is needed or not. It is then used to byteswap the last instruction of the guest in the endian order of the host before MMIO emulation is performed. Finally, kvmppc_handle_load() of kvmppc_handle_store() are modified to reverse the endianness of the MMIO if required. Signed-off-by:
Cédric Le Goater <clg@fr.ibm.com> [agraf: add booke handling] Signed-off-by:
Alexander Graf <agraf@suse.de>
-
- Jan 09, 2014
-
-
Alexander Graf authored
We had code duplication between the inline functions to get our last instruction on normal interrupts and system call interrupts. Unify both helper functions towards a single implementation. Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Zhouyi Zhou authored
NULL return of kvmppc_mmu_hpte_cache_next should be handled Signed-off-by:
Zhouyi Zhou <yizhouzhou@ict.ac.cn> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Tiejun Chen authored
Rather than calling hard_irq_disable() when we're back in C code we can just call RECONCILE_IRQ_STATE to soft disable IRQs while we're already in hard disabled state. This should be functionally equivalent to the code before, but cleaner and faster. Signed-off-by:
Tiejun Chen <tiejun.chen@windriver.com> [agraf: fix comment, commit message] Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Bharat Bhushan authored
KVM uses same WIM tlb attributes as the corresponding qemu pte. For this we now search the linux pte for the requested page and get these cache caching/coherency attributes from pte. Signed-off-by:
Bharat Bhushan <bharat.bhushan@freescale.com> Reviewed-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Bharat Bhushan authored
We need to search linux "pte" to get "pte" attributes for setting TLB in KVM. This patch defines a lookup_linux_ptep() function which returns pte pointer. Signed-off-by:
Bharat Bhushan <bharat.bhushan@freescale.com> Reviewed-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Bharat Bhushan authored
lookup_linux_pte() is doing more than lookup, updating the pte, so for clarity it is renamed to lookup_linux_pte_and_update() Signed-off-by:
Bharat Bhushan <bharat.bhushan@freescale.com> Reviewed-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Bharat Bhushan authored
On booke, "struct tlbe_ref" contains host tlb mapping information (pfn: for guest-pfn to pfn, flags: attribute associated with this mapping) for a guest tlb entry. So when a guest creates a TLB entry then "struct tlbe_ref" is set to point to valid "pfn" and set attributes in "flags" field of the above said structure. When a guest TLB entry is invalidated then flags field of corresponding "struct tlbe_ref" is updated to point that this is no more valid, also we selectively clear some other attribute bits, example: if E500_TLB_BITMAP was set then we clear E500_TLB_BITMAP, if E500_TLB_TLB0 is set then we clear this. Ideally we should clear complete "flags" as this entry is invalid and does not have anything to re-used. The other part of the problem is that when we use the same entry again then also we do not clear (started doing or-ing etc). So far it was working because the selectively clearing mentioned above actually clears "flags" what was set during TLB mapping. But the problem starts coming when we add more attributes to this then we need to selectively clear them and which is not needed. Signed-off-by:
Bharat Bhushan <bharat.bhushan@freescale.com> Reviewed-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Paul Mackerras authored
This modifies kvmppc_load_fp and kvmppc_save_fp to use the generic FP/VSX and VMX load/store functions instead of open-coding the FP/VSX/VMX load/store instructions. Since kvmppc_load/save_fp don't follow C calling conventions, we make them private symbols within book3s_hv_rmhandlers.S. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Paul Mackerras authored
Now that we have the vcpu floating-point and vector state stored in the same type of struct as the main kernel uses, we can load that state directly from the vcpu struct instead of having extra copies to/from the thread_struct. Similarly, when the guest state needs to be saved, we can have it saved it directly to the vcpu struct by setting the current->thread.fp_save_area and current->thread.vr_save_area pointers. That also means that we don't need to back up and restore userspace's FP/vector state. This all makes the code simpler and faster. Note that it's not necessary to save or modify current->thread.fpexc_mode, since nothing in KVM uses or is affected by its value. Nor is it necessary to touch used_vr or used_vsr. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Paul Mackerras authored
This uses struct thread_fp_state and struct thread_vr_state to store the floating-point, VMX/Altivec and VSX state, rather than flat arrays. This makes transferring the state to/from the thread_struct simpler and allows us to unify the get/set_one_reg implementations for the VSX registers. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Paul Mackerras authored
The load_up_fpu and load_up_altivec functions were never intended to be called from C, and do things like modifying the MSR value in their callers' stack frames, which are assumed to be interrupt frames. In addition, on 32-bit Book S they require the MMU to be off. This makes KVM use the new load_fp_state() and load_vr_state() functions instead of load_up_fpu/altivec. This means we can remove the assembler glue in book3s_rmhandlers.S, and potentially fixes a bug on Book E, where load_up_fpu was called directly from C. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Bharat Bhushan authored
kvm_hypercall0() and friends have nothing KVM specific so moved to epapr_hypercall0() and friends. Also they are moved from arch/powerpc/include/asm/kvm_para.h to arch/powerpc/include/asm/epapr_hcalls.h Signed-off-by:
Bharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Bharat Bhushan authored
kvm_hypercall() have nothing KVM specific, so renamed to epapr_hypercall(). Also this in moved to arch/powerpc/include/asm/epapr_hcalls.h Signed-off-by:
Bharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Gleb Natapov authored
XICS failed to free xics structure on error path. MPIC destroy handler forgot to delete kvm_device structure. Signed-off-by:
Gleb Natapov <gleb@redhat.com> Acked-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Alexander Graf authored
Systems that support automatic loading of kernel modules through device aliases should try and automatically load kvm when /dev/kvm gets opened. Add code to support that magic for all PPC kvm targets, even the ones that don't support modules yet. Signed-off-by:
Alexander Graf <agraf@suse.de>
-
- Nov 21, 2013
-
-
Liu Ping Fan authored
In some scene, e.g openstack CI, PR guest can trigger "sc 1" frequently, this patch optimizes the path by directly delivering BOOK3S_INTERRUPT_SYSCALL to HV guest, so powernv can return to HV guest without heavy exit, i.e, no need to swap TLB, HTAB,.. etc Signed-off-by:
Liu Ping Fan <pingfank@linux.vnet.ibm.com> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Heiko Carstens authored
Using the address of 'empty_zero_page' as source address in order to clear a page is wrong. On some architectures empty_zero_page is only the pointer to the struct page of the empty_zero_page. Therefore the clear page operation would copy the contents of a couple of struct pages instead of clearing a page. For kvm only arm/arm64 are affected by this bug. To fix this use the ZERO_PAGE macro instead which will return the struct page address of the empty_zero_page on all architectures. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Gleb Natapov <gleb@redhat.com>
-
- Nov 20, 2013
-
-
Sasha Levin authored
We should not be using jump labels before they were initialized. Push back the callback to until after jump label initialization. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Gleb Natapov <gleb@redhat.com>
-
- Nov 19, 2013
-
-
git://git.linaro.org/people/cdall/linux-kvm-armGleb Natapov authored
Fix percpu vmalloc allocations
-
- Nov 17, 2013
-
-
Christoffer Dall authored
Using virt_to_phys on percpu mappings is horribly wrong as it may be backed by vmalloc. Introduce kvm_kaddr_to_phys which translates both types of valid kernel addresses to the corresponding physical address. At the same time resolves a typing issue where we were storing the physical address as a 32 bit unsigned long (on arm), truncating the physical address for addresses above the 4GB limit. This caused breakage on Keystone. Cc: <stable@vger.kernel.org> [3.10+] Reported-by:
Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by:
Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org>
-
- Nov 15, 2013
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM changes from Paolo Bonzini: "Here are the 3.13 KVM changes. There was a lot of work on the PPC side: the HV and emulation flavors can now coexist in a single kernel is probably the most interesting change from a user point of view. On the x86 side there are nested virtualization improvements and a few bugfixes. ARM got transparent huge page support, improved overcommit, and support for big endian guests. Finally, there is a new interface to connect KVM with VFIO. This helps with devices that use NoSnoop PCI transactions, letting the driver in the guest execute WBINVD instructions. This includes some nVidia cards on Windows, that fail to start without these patches and the corresponding userspace changes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (146 commits) kvm, vmx: Fix lazy FPU on nested guest arm/arm64: KVM: PSCI: propagate caller endianness to the incoming vcpu arm/arm64: KVM: MMIO support for BE guest kvm, cpuid: Fix sparse warning kvm: Delete prototype for non-existent function kvm_check_iopl kvm: Delete prototype for non-existent function complete_pio hung_task: add method to reset detector pvclock: detect watchdog reset at pvclock read kvm: optimize out smp_mb after srcu_read_unlock srcu: API for barrier after srcu read unlock KVM: remove vm mmap method KVM: IOMMU: hva align mapping page size KVM: x86: trace cpuid emulation when called from emulator KVM: emulator: cleanup decode_register_operand() a bit KVM: emulator: check rex prefix inside decode_register() KVM: x86: fix emulation of "movzbl %bpl, %eax" kvm_host: typo fix KVM: x86: emulate SAHF instruction MAINTAINERS: add tree for kvm.git Documentation/kvm: add a 00-INDEX file ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull Xen updates from Konrad Rzeszutek Wilk: "This has tons of fixes and two major features which are concentrated around the Xen SWIOTLB library. The short <blurb> is that the tracing facility (just one function) has been added to SWIOTLB to make it easier to track I/O progress. Additionally under Xen and ARM (32 & 64) the Xen-SWIOTLB driver "is used to translate physical to machine and machine to physical addresses of foreign[guest] pages for DMA operations" (Stefano) when booting under hardware without proper IOMMU. There are also bug-fixes, cleanups, compile warning fixes, etc. The commit times for some of the commits is a bit fresh - that is b/c we wanted to make sure we have the Ack's from the ARM folks - which with the string of back-to-back conferences took a bit of time. Rest assured - the code has been stewing in #linux-next for some time. Features: - SWIOTLB has tracing added when doing bounce buffer. - Xen ARM/ARM64 can use Xen-SWIOTLB. This work allows Linux to safely program real devices for DMA operations when running as a guest on Xen on ARM, without IOMMU support. [*1] - xen_raw_printk works with PVHVM guests if needed. Bug-fixes: - Make memory ballooning work under HVM with large MMIO region. - Inform hypervisor of MCFG regions found in ACPI DSDT. - Remove deprecated IRQF_DISABLED. - Remove deprecated __cpuinit. [*1]: "On arm and arm64 all Xen guests, including dom0, run with second stage translation enabled. As a consequence when dom0 programs a device for a DMA operation is going to use (pseudo) physical addresses instead machine addresses. This work introduces two trees to track physical to machine and machine to physical mappings of foreign pages. Local pages are assumed mapped 1:1 (physical address == machine address). It enables the SWIOTLB-Xen driver on ARM and ARM64, so that Linux can translate physical addresses to machine addresses for dma operations when necessary. " (Stefano)" * tag 'stable/for-linus-3.13-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (32 commits) xen/arm: pfn_to_mfn and mfn_to_pfn return the argument if nothing is in the p2m arm,arm64/include/asm/io.h: define struct bio_vec swiotlb-xen: missing include dma-direction.h pci-swiotlb-xen: call pci_request_acs only ifdef CONFIG_PCI arm: make SWIOTLB available xen: delete new instances of added __cpuinit xen/balloon: Set balloon's initial state to number of existing RAM pages xen/mcfg: Call PHYSDEVOP_pci_mmcfg_reserved for MCFG areas. xen: remove deprecated IRQF_DISABLED x86/xen: remove deprecated IRQF_DISABLED swiotlb-xen: fix error code returned by xen_swiotlb_map_sg_attrs swiotlb-xen: static inline xen_phys_to_bus, xen_bus_to_phys, xen_virt_to_bus and range_straddles_page_boundary grant-table: call set_phys_to_machine after mapping grant refs arm,arm64: do not always merge biovec if we are running on Xen swiotlb: print a warning when the swiotlb is full swiotlb-xen: use xen_dma_map/unmap_page, xen_dma_sync_single_for_cpu/device xen: introduce xen_dma_map/unmap_page and xen_dma_sync_single_for_cpu/device tracing/events: Fix swiotlb tracepoint creation swiotlb-xen: use xen_alloc/free_coherent_pages xen: introduce xen_alloc/free_coherent_pages ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linuxLinus Torvalds authored
Pull virtio updates from Rusty Russell: "Nothing really exciting: some groundwork for changing virtio endian, and some robustness fixes for broken virtio devices, plus minor tweaks" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio_scsi: verify if queue is broken after virtqueue_get_buf() x86, asmlinkage, lguest: Pass in globals into assembler statement virtio: mmio: fix signature checking for BE guests virtio_ring: adapt to notify() returning bool virtio_net: verify if queue is broken after virtqueue_get_buf() virtio_console: verify if queue is broken after virtqueue_get_buf() virtio_blk: verify if queue is broken after virtqueue_get_buf() virtio_ring: add new function virtqueue_is_broken() virtio_test: verify if virtqueue_kick() succeeded virtio_net: verify if virtqueue_kick() succeeded virtio_ring: let virtqueue_{kick()/notify()} return a bool virtio_ring: change host notification API virtio_config: remove virtio_config_val virtio: use size-based config accessors. virtio_config: introduce size-based accessors. virtio_ring: plug kmemleak false positive. virtio: pm: use CONFIG_PM_SLEEP instead of CONFIG_PM
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linuxLinus Torvalds authored
Pull module updates from Rusty Russell: "Mainly boring here, too. rmmod --wait finally removed, though" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: modpost: fix bogus 'exported twice' warnings. init: fix in-place parameter modification regression asmlinkage, module: Make ksymtab and kcrctab symbols and __this_module __visible kernel: add support for init_array constructors modpost: Optionally ignore secondary errors seen if a single module build fails module: remove rmmod --wait option.
-
Linus Torvalds authored
Merge patches from Andrew Morton: - memstick fixes - the rest of MM - various misc bits that were awaiting merges from linux-next into mainline: seq_file, printk, rtc, completions, w1, softirqs, llist, kfifo, hfsplus * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (72 commits) cmdline-parser: fix build hfsplus: Fix undefined __divdi3 in hfsplus_init_header_node() kfifo API type safety kfifo: kfifo_copy_{to,from}_user: fix copied bytes calculation sound/core/memalloc.c: use gen_pool_dma_alloc() to allocate iram buffer llists-move-llist_reverse_order-from-raid5-to-llistc-fix llists: move llist_reverse_order from raid5 to llist.c kernel: fix generic_exec_single indentation kernel-provide-a-__smp_call_function_single-stub-for-config_smp-fix kernel: provide a __smp_call_function_single stub for !CONFIG_SMP kernel: remove CONFIG_USE_GENERIC_SMP_HELPERS revert "softirq: Add support for triggering softirq work on softirqs" drivers/w1/masters/w1-gpio.c: use dev_get_platdata() sched: remove INIT_COMPLETION tree-wide: use reinit_completion instead of INIT_COMPLETION sched: replace INIT_COMPLETION with reinit_completion drivers/rtc/rtc-hid-sensor-time.c: enable HID input processing early drivers/rtc/rtc-hid-sensor-time.c: use dev_get_platdata() vsprintf: ignore %n again seq_file: remove "%n" usage from seq_file users ...
-