- Aug 19, 2010
-
-
Michal Simek authored
Functions ll_temac_rx_irq and ll_temac_tx_irq have pointer to net_device as second parameter not pointer to temac_local. Signed-off-by:
Michal Simek <monstr@monstr.eu> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Dont clear netdev->stats, it might give transient wrong values to concurrent stat readers. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Dont clear netdev->stats, it might give transient wrong values to concurrent stat readers. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
After skb is queued, its illegal to dereference it. Cache skb->len into a temporary variable. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kuninori Morimoto authored
Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
Signed-off-by:
Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
Spin lock rds_ring->lock is used in poll routine, so other users should use spin_lock_bh(). While posting rx buffers from netxen_nic_attach, rds_ring->lock is not required, so cleaning it instead of fixing it by spin_lock_bh(). Signed-off-by:
Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Phil Oester authored
When adding a new vlan, if the underlying interface has no carrier, then the newly added vlan interface should also have no carrier. At present, this is not true - the newly added vlan is added with carrier up. Fix by checking state of real device. Signed-off-by:
Phil Oester <kernel@linuxace.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Robert Jennings authored
This fixes the following opps which can occur when trying to deallocate receive buffer pools when changing the MTU of an active ibmveth device. Oops: Kernel access of bad area, sig: 11 [#1] NIP: d000000004db00e8 LR: d000000004db00ac CTR: 0000000000591038 REGS: c00000007fff39d0 TRAP: 0300 Not tainted (2.6.36-rc1) MSR: 8000000000009032 <EE,ME,IR,DR> CR: 22248244 XER: 00000002 DAR: 0000000000000488, DSISR: 0000000042000000 TASK = c00000007c463790[6531] 'netserver' THREAD: c00000007a154000 CPU: 0 GPR00: 0000000000000000 c00000007fff3c50 d000000004dbd360 0000000000000001 GPR04: 0000000000000001 1fffffffffffffff 000000000000043c c00000007a8e9f60 GPR08: c00000007a8e9e20 0000000000000245 0000000000000488 0000000000000000 GPR12: 00000000000000c0 c000000006d70000 c00000007bfec098 c00000007bfebc2c GPR16: c00000007a157c78 0000000000000000 0000000000000001 0000000000000000 GPR20: 0000000000000001 0000000000000010 c000000000b51180 c00000007a8e9d90 GPR24: c00000007a8e9da0 c00000007a8e9580 00000000000005ea 00000000000002ff GPR28: 0000000000000004 0000000000000080 c000000000a946f8 c00000007a8e9d80 NIP [d000000004db00e8] .ibmveth_remove_buffer_from_pool+0xe8/0x130 [ibmveth] LR [d000000004db00ac] .ibmveth_remove_buffer_from_pool+0xac/0x130 [ibmveth] Call Trace: [c00000007fff3c50] [d000000004db00ac] .ibmveth_remove_buffer_from_pool+0xac/0x130 [ibmveth] (unreliable) [c00000007fff3cf0] [d000000004db31dc] .ibmveth_poll+0x30c/0x460 [ibmveth] [c00000007fff3dd0] [c00000000042c4b8] .net_rx_action+0x178/0x278 [c00000007fff3eb0] [c000000000093cf0] .__do_softirq+0x118/0x1f8 [c00000007fff3f90] [c00000000002ab3c] .call_do_softirq+0x14/0x24 [c00000007a157600] [c00000000000e3e4] .do_softirq+0xec/0x110 [c00000007a1576a0] [c000000000093394] .local_bh_enable_ip+0xb4/0xe0 [c00000007a157720] [c0000000004f0bac] ._raw_spin_unlock_bh+0x3c/0x50 [c00000007a157790] [c0000000004186e0] .release_sock+0x158/0x188 [c00000007a157840] [c000000000479660] .tcp_recvmsg+0x560/0x9b8 [c00000007a157970] [c0000000004a0d78] .inet_recvmsg+0x80/0xd8 [c00000007a157a00] [c000000000413e28] .sock_recvmsg+0x128/0x178 [c00000007a157bf0] [c0000000004164ac] .SyS_recvfrom+0xb4/0x148 [c00000007a157d70] [c000000000411f3c] .SyS_socketcall+0x274/0x360 [c00000007a157e30] [c0000000000085b4] syscall_exit+0x0/0x40 Reported-by:
Rafael Camarda Silva Folco <rfolco@linux.vnet.ibm.com> Signed-off-by:
Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andre Detsch authored
ehea: Fix synchronization between HW and SW send queue When memory is added to / removed from a partition via the Memory DLPAR mechanism, the eHEA driver has to do a couple of things to reflect the memory change in its own IO address translation tables. This involves stopping and restarting the HW queues. During this operation, it is possible that HW and SW pointer into these queues get out of sync. This results in a situation where packets that are attached to a send queue are not transmitted immediately, but delayed until further X packets have been put on the queue. This patch detects such loss of synchronization, and resets the ehea port when needed. Signed-off-by:
Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by:
Andre Detsch <adetsch@br.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yaniv Rosner authored
Update bnx2x version to 1.52.53-4 Signed-off-by:
Yaniv Rosner <yanivr@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yaniv Rosner authored
PHY locking is required between two ports for some external PHYs. Since initialization was done in the common init function (called only on the first port initialization) rather than in the port init function, there was in fact no PHY locking between the ports. Signed-off-by:
Yaniv Rosner <yanivr@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
struct rds_rdma_notify contains a 32 bits hole on 64bit arches, make sure it is zeroed before copying it to user. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> CC: Andy Grover <andy.grover@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
Since commit 1dacc76d Author: Johannes Berg <johannes@sipsolutions.net> Date: Wed Jul 1 11:26:02 2009 +0000 net/compat/wext: send different messages to compat tasks we had a race condition when setting and then restoring frag_list. Eric attempted to fix it, but the fix created even worse problems. However, the original motivation I had when I added the code that turned out to be racy is no longer clear to me, since we only copy up to skb->len to userspace, which doesn't include the frag_list length. As a result, not doing any frag_list clearing and restoring avoids the race condition, while not introducing any other problems. Additionally, while preparing this patch I found that since none of the remaining netlink code is really aware of the frag_list, we need to use the original skb's information for packet information and credentials. This fixes, for example, the group information received by compat tasks. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: stable@kernel.org [2.6.31+, for 2.6.35 revert 1235f504 ] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sam Ravnborg authored
"make headers_check" issued the following warning: CHECK include/linux/netfilter (64 files) usr/include/linux/netfilter/xt_ipvs.h:19: found __[us]{8,16,32,64} type without #include <linux/types.h> Fix this by as suggested including linux/types.h. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sachin Sanap authored
Signed-off-by:
Sachin Sanap <ssanap@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Aug 18, 2010
-
-
Jarek Poplawski authored
>Xin Xiaohui wrote: > I looked into the code dev_gro_receive(), found the code here: > if the frags[0] is pulled to 0, then the page will be released, > and memmove() frags left. > Is that right? I'm not sure if memmove do right or not, but > frags[0].size is never set after memove at least. what I think > a simple way is not to do anything if we found frags[0].size == 0. > The patch is as followed. ... This version of the patch fixes the bug directly in memmove. Reported-by:
"Xin, Xiaohui" <xiaohui.xin@intel.com> Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
We leak at least 32bits of kernel memory to user land in tc dump, because we dont init all fields (capab ?) of the dumped structure. Use C99 initializers so that holes and non explicit fields are zeroed. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
After commit 24b36f01 (netfilter: {ip,ip6,arp}_tables: dont block bottom half more than necessary), lockdep can raise a warning because we attempt to lock a spinlock with BH enabled, while the same lock is usually locked by another cpu in a softirq context. Disable again BH to avoid these lockdep warnings. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Diagnosed-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Aug 17, 2010
-
- Aug 16, 2010
-
-
David S. Miller authored
This reverts commit 1235f504 . It causes regressions worse than the problem it was trying to fix. Eric will try to solve the problem another way. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Aug 15, 2010
-
-
Min Zhang authored
sysctl output ipv6 gc_elasticity and min_adv_mss as values divided by HZ. However, they are not in unit of jiffies, since ip6_rt_min_advmss refers to packet size and ip6_rt_fc_elasticity is used as scaler as in expire>>ip6_rt_gc_elasticity, so replace the jiffies conversion handler will regular handler for them. This has impact on scripts that are currently working assuming the divide by HZ, will yield different results with this patch in place. Signed-off-by:
Min Zhang <mzhang@mvista.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
As xfrm_compile_policy runs within a read_lock, we cannot use GFP_KERNEL for memory allocations. Reported-by:
Luca Tettamanti <kronos.it@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Aug 14, 2010
-
-
Maxim Levitsky authored
Atheros PCIe wireless cards handled by ath5k do require L0s disabled. For distributions shipping with CONFIG_PCIEASPM (this will be enabled by default in the future in 2.6.36) this will also mean both L1 and L0s will be disabled when a pre 1.1 PCIe device is detected. We do know L1 works correctly even for all ath5k pre 1.1 PCIe devices though but cannot currently undue the effect of a blacklist, for details you can read pcie_aspm_sanity_check() and see how it adjusts the device link capability. It may be possible in the future to implement some PCI API to allow drivers to override blacklists for pre 1.1 PCIe but for now it is best to accept that both L0s and L1 will be disabled completely for distributions shipping with CONFIG_PCIEASPM rather than having this issue present. Motivation for adding this new API will be to help with power consumption for some of these devices. Example of issues you'd see: - On the Acer Aspire One (AOA150, Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)) doesn't work well with ASPM enabled, the card will eventually stall on heavy traffic with often 'unsupported jumbo' warnings appearing. Disabling ASPM L0s in ath5k fixes these problems. - On the same card you would see a storm of RXORN interrupts even though medium is idle. Credit for root causing and fixing the bug goes to Jussi Kivilinna. Cc: David Quan <David.Quan@atheros.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tim Gardner <tim.gardner@canonical.com> Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: stable@kernel.org Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
This patch handles the firmware loading properly for device ID 7015. Signed-off-by:
Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Yuri Kululin authored
Use appropriate command (CMD_TRIGGER_SCAN_TO) instead of scan command (CMD_SCAN) to configure trigger scan timeout. This was broken in commit 3a98c30f . This fix address the bug reported here: https://bugzilla.kernel.org/show_bug.cgi?id=16554 Cc: stable@kernel.org Signed-off-by:
Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by:
Yuri Kululin <ext-yuri.kululin@nokia.com> Acked-by:
Kalle Valo <kvalo@adurom.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Vivek Natarajan authored
Some APs advertise that they may be HT40 capable in the capabilites but the current operating channel configuration may be only HT20. This causes disconnection as ath9k_htc sets WLAN_RC_40_FLAG despite the AP operating in HT20 mode. Hence set this flag only if the current channel configuration is HT40 enabled. Cc: stable@kernel.org Signed-off-by:
Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
- Aug 13, 2010
-
-
Ursula Braun authored
READ/WRITE seems to be a bit too generic for defines in a device driver. Just rename them to CTCM_READ/CTCM_WRITE to avoid warnings. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiko Carstens authored
READ/WRITE seems to be a bit too generic for defines in a device driver. Just rename them to READ_CHANNEL/WRITE_CHANNEL which should suffice. Fixes this: In file included from drivers/s390/net/claw.c:93: drivers/s390/net/claw.h:78:1: warning: "WRITE" redefined In file included from /home2/heicarst/linux-2.6/arch/s390/include/asm/debug.h:12, from drivers/s390/net/claw.c:68: include/linux/fs.h:156:1: warning: this is the location of the previous definition Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Aug 12, 2010
-
-
Randy Dunlap authored
Several gigabit network drivers (SB1250_MAC, TIGON3, FSL, GIANFAR, UCC_GETH, MV643XX_ETH, XILINX_LL_TEMAC, S6GMAC, STMMAC_ETH, PASEMI_MAC, and OCTEON_ETHERNET) select PHYLIB. These drivers are not under NET_ETHERNET (10/100 mbit), so this warning is generated (long, irrelevant parts are omitted): warning: (NET_DSA && NET && EXPERIMENTAL && NET_ETHERNET && !S390 || ... || SB1250_MAC && NETDEVICES && NETDEV_1000 && SIBYTE_SB1xxx_SOC || TIGON3 && NETDEVICES && NETDEV_1000 && PCI || FSL_PQ_MDIO && NETDEVICES && NETDEV_1000 && FSL_SOC || GIANFAR && NETDEVICES && NETDEV_1000 && FSL_SOC || UCC_GETH && NETDEVICES && NETDEV_1000 && QUICC_ENGINE || MV643XX_ETH && NETDEVICES && NETDEV_1000 && (MV64X60 || PPC32 || PLAT_ORION) || XILINX_LL_TEMAC && NETDEVICES && NETDEV_1000 && (PPC || MICROBLAZE) || S6GMAC && NETDEVICES && NETDEV_1000 && XTENSA_VARIANT_S6000 || STMMAC_ETH && NETDEV_1000 && NETDEVICES && CPU_SUBTYPE_ST40 || PASEMI_MAC && NETDEVICES && NETDEV_10000 && PPC_PASEMI && PCI || OCTEON_ETHERNET && STAGING && !STAGING_EXCLUDE_BUILD && CPU_CAVIUM_OCTEON) selects PHYLIB which has unmet direct dependencies (!S390 && NET_ETHERNET) PHYLIB is used by non-10/100 mbit ethernet drivers, so change the dependencies to be NETDEVICES instead of NET_ETHERNET. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Oliver Hartkopp authored
This patch adds a limit for nframes as the number of frames in TX_SETUP and RX_SETUP are derived from a single byte multiplex value by default. Use-cases that would require to send/filter more than 256 CAN frames should be implemented in userspace for complexity reasons anyway. Additionally the assignments of unsigned values from userspace to signed values in kernelspace and vice versa are fixed by using unsigned values in kernelspace consistently. Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Reported-by:
Ben Hawkes <hawkes@google.com> Acked-by:
Urs Thuermann <urs.thuermann@volkswagen.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rajkumar Manoharan authored
This should fix the oops which occurs during the packet injection on monitor interface. EIP is at ath9k_htc_tx_start+0x69/0x220 [ath9k_htc] [<f84dc8ea>] ? invoke_tx_handlers+0xa5a/0xee0 [mac80211] [<f82c84f4>] ? ath9k_htc_tx+0x44/0xe0 [ath9k_htc] [<f84db7b8>] ? __ieee80211_tx+0xf8/0x190 [mac80211] [<f84dce0d>] ? ieee80211_tx+0x9d/0x1a0 [mac80211] [<f84dcfac>] ? ieee80211_xmit+0x9c/0x1c0 [mac80211] [<f84dd1b5>] ? ieee80211_monitor_start_xmit+0x85/0xb0 [mac80211] [<c04c30cd>] ? dev_hard_start_xmit+0x1ad/0x210 [<c04b97c2>] ? __alloc_skb+0x52/0x130 [<c04d7cd5>] ? sch_direct_xmit+0x105/0x170 [<c04c5e9f>] ? dev_queue_xmit+0x37f/0x4b0 [<c0567e1e>] ? packet_snd+0x21e/0x250 [<c05684a2>] ? packet_sendmsg+0x32/0x40 [<c04b4c63>] ? sock_aio_write+0x113/0x130 [<c0207934>] ? do_sync_write+0xc4/0x100 [<c0167740>] ? autoremove_wake_function+0x0/0x50 [<c02f4414>] ? security_file_permission+0x14/0x20 [<c0207ad4>] ? rw_verify_area+0x64/0xe0 [<c01e6458>] ? handle_mm_fault+0x338/0x390 [<c0207cd5>] ? vfs_write+0x185/0x1a0 [<c058db20>] ? do_page_fault+0x160/0x3a0 [<c0208512>] ? sys_write+0x42/0x70 [<c01033ec>] ? syscall_call+0x7/0xb Signed-off-by:
Rajkumar Manoharan <rmanoharan@atheros.com> Cc: stable@kernel.org Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
It is necessary to call pm_qos_add_request prior to calling pm_qos_update_request. It was revealed that ipw2100 has been doing this wrong since "pm_qos: Get rid of the allocation in pm_qos_add_request()" (commit 82f68251 ) added a WARN that results in the following backtrace: WARNING: at kernel/pm_qos_params.c:264 pm_qos_update_request+0x5e/0x70() pm_qos_update_request() called for unknown object Call Trace: [<c1024088>] ? warn_slowpath_common+0x78/0xb0 [<c1041c9e>] ? pm_qos_update_request+0x5e/0x70 [<c1041c9e>] ? pm_qos_update_request+0x5e/0x70 [<c1024153>] ? warn_slowpath_fmt+0x33/0x40 [<c1041c9e>] ? pm_qos_update_request+0x5e/0x70 [<f89fe15f>] ? ipw2100_up+0x3f/0xf10 [ipw2100] [<c11961c9>] ? vsnprintf+0xc9/0x530 [<f89ff36c>] ? ipw2100_net_init+0x2c/0x1c0 [ipw2100] [<c12f542d>] ? register_netdevice+0x7d/0x3c0 [<f89f9b00>] ? ipw2100_irq_tasklet+0x910/0x9a0 [ipw2100] [<c12f579f>] ? register_netdev+0x2f/0x40 [<f89fd471>] ? ipw2100_pci_init_one+0xd21/0x1060 [ipw2100] [<c11a5ebb>] ? local_pci_probe+0xb/0x10 [<c11a6d49>] ? pci_device_probe+0x69/0x90 [<c1224704>] ? driver_probe_device+0x74/0x180 [<c10dd15a>] ? sysfs_create_dir+0x6a/0xb0 [<c1224889>] ? __driver_attach+0x79/0x80 [<c1224810>] ? __driver_attach+0x0/0x80 [<c1223fa2>] ? bus_for_each_dev+0x52/0x80 [<c1224586>] ? driver_attach+0x16/0x20 [<c1224810>] ? __driver_attach+0x0/0x80 [<c122395f>] ? bus_add_driver+0x17f/0x250 [<c11a5ec0>] ? pci_device_shutdown+0x0/0x20 [<c11a6c80>] ? pci_device_remove+0x0/0x40 [<c1224b13>] ? driver_register+0x63/0x120 [<c11a6f96>] ? __pci_register_driver+0x36/0xa0 [<f84f9048>] ? ipw2100_init+0x48/0x67 [ipw2100] [<c1001122>] ? do_one_initcall+0x32/0x170 [<c1087078>] ? __vunmap+0xb8/0xf0 [<f84f9000>] ? ipw2100_init+0x0/0x67 [ipw2100] [<c10510c1>] ? sys_init_module+0x161/0x1000 [<c108f847>] ? sys_close+0x67/0xe0 [<c13647c1>] ? syscall_call+0x7/0xb This patch moves pm_qos_add_request prior to pci_register_driver in ipw2100 in order to avoid this problem. Reported-by:
Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
- Aug 11, 2010
-
-
Jarek Poplawski authored
Require qdisc class ops .walk and .leaf for classful qdisc in register_qdisc(). The checks could be done later insted, but these ops are really needed and used by most of classful qdiscs. Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jarek Poplawski authored
sch_sfq as a classful qdisc needs the .leaf handler. Otherwise, there is an oops possible in tc_modify_qdisc()/check_loop(). Fixes commit 7d2681a6 Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sjur Braendeland authored
The setting of SPI_DATA_POS depending on CONFIG_CAIF_SPI_SYNC where inverted. Signed-off-by:
Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sjur Braendeland authored
Headroom size for control channel must be at least 48 bytes in some scenarios. Signed-off-by:
Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
John W. Linville authored
"netpoll: Use 'bool' for netpoll_rx() return type." missed the case when CONFIG_NETPOLL is disabled. Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-