- Jan 07, 2016
-
-
David Sterba authored
Inodes for delayed iput allocate a trivial helper structure, let's place the list hook directly into the inode and save a kmalloc (killing a __GFP_NOFAIL as a bonus) at the cost of increasing size of btrfs_inode. The inode can be put into the delayed_iputs list more than once and we have to keep the count. This means we can't use the list_splice to process a bunch of inodes because we'd lost track of the count if the inode is put into the delayed iputs again while it's processed. Signed-off-by:
David Sterba <dsterba@suse.com>
-
Zhao Lei authored
Since we will add support for -d dup for non-mixed filesystem, kernel need to support converting to this raid-type. This patch remove limitation of above case. Tested by following script: (combination of dup conversion with fsck): export TEST_DEV='/dev/vdc' export TEST_DIR='/var/ltf/tester/mnt' do_dup_test() { local m_from="$1" local d_from="$2" local m_to="$3" local d_to="$4" echo "Convert from -m $m_from -d $d_from to -m $m_to -d $d_to" umount "$TEST_DIR" &>/dev/null ./mkfs.btrfs -f -m "$m_from" -d "$d_from" "$TEST_DEV" >/dev/null || return 1 mount "$TEST_DEV" "$TEST_DIR" || return 1 cp -a /sbin/* "$TEST_DIR" [[ "$m_from" != "$m_to" ]] && { ./btrfs balance start -f -mconvert="$m_to" "$TEST_DIR" || return 1 } [[ "$d_from" != "$d_to" ]] && { local opt=() [[ "$d_to" == single ]] && opt+=("-f") ./btrfs balance start "${opt[@]}" -dconvert="$d_to" "$TEST_DIR" || return 1 } umount "$TEST_DIR" || return 1 ./btrfsck "$TEST_DEV" || return 1 echo return 0 } test_all() { for m_from in single dup; do for d_from in single dup; do for m_to in single dup; do for d_to in single dup; do do_dup_test "$m_from" "$d_from" "$m_to" "$d_to" || return 1 done done done done } test_all Signed-off-by:
Zhao Lei <zhaolei@cn.fujitsu.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Josef Bacik authored
We hit this panic on a few of our boxes this week where we have an ordered_extent with an NULL inode. We do an igrab() of the inode in writepages, but weren't doing it in writepage which can be called directly from the VM on dirty pages. If the inode has been unlinked then we could have I_FREEING set which means igrab() would return NULL and we get this panic. Fix this by trying to igrab in btrfs_writepage, and if it returns NULL then just redirty the page and return AOP_WRITEPAGE_ACTIVATE; so the VM knows it wasn't successful. Thanks, Signed-off-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
Anand Jain authored
Looks like oversight, call brelse() when checksum fails. Further down the code, in the non error path, we do call brelse() and so we don't see brelse() in the goto error paths. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com>
-
- Dec 21, 2015
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC fixes from Alexandre Belloni: "Late fixes for the RTC subsystem for 4.4: A fix for a nasty hardware bug in rk808 and an initialization reordering in da9063 to fix a possible crash" * tag 'rtc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: da9063: fix access ordering error during RTC interrupt at system power on rtc: rk808: Compensate for Rockchip calendar deviation on November 31st
-
- Dec 20, 2015
-
-
Steve Twiss authored
This fix alters the ordering of the IRQ and device registrations in the RTC driver probe function. This change will apply to the RTC driver that supports both DA9063 and DA9062 PMICs. A problem could occur with the existing RTC driver if: A system is started from a cold boot using the PMIC RTC IRQ to initiate a power on operation. For instance, if an RTC alarm is used to start a platform from power off. The existing driver IRQ is requested before the device has been properly registered. i.e. ret = devm_request_threaded_irq() comes before rtc->rtc_dev = devm_rtc_device_register(); In this case, the interrupt can be called before the device has been registered and the handler can be called immediately. The IRQ handler da9063_alarm_event() contains the function call rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF); which in turn tries to access the unavailable rtc->rtc_dev. The fix is to reorder the functions inside the RTC probe. The IRQ is requested after the RTC device resource has been registered so that get_irq_byname is the last thing to happen. Signed-off-by:
Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Julius Werner authored
In A.D. 1582 Pope Gregory XIII found that the existing Julian calendar insufficiently represented reality, and changed the rules about calculating leap years to account for this. Similarly, in A.D. 2013 Rockchip hardware engineers found that the new Gregorian calendar still contained flaws, and that the month of November should be counted up to 31 days instead. Unfortunately it takes a long time for calendar changes to gain widespread adoption, and just like more than 300 years went by before the last Protestant nation implemented Greg's proposal, we will have to wait a while until all religions and operating system kernels acknowledge the inherent advantages of the Rockchip system. Until then we need to translate dates read from (and written to) Rockchip hardware back to the Gregorian format. This patch works by defining Jan 1st, 2016 as the arbitrary anchor date on which Rockchip and Gregorian calendars are in sync. From that we can translate arbitrary later dates back and forth by counting the number of November/December transitons since the anchor date to determine the offset between the calendars. We choose this method (rather than trying to regularly "correct" the date stored in hardware) since it's the only way to ensure perfect time-keeping even if the system may be shut down for an unknown number of years. The drawback is that other software reading the same hardware (e.g. mainboard firmware) must use the same translation convention (including the same anchor date) to be able to read and write correct timestamps from/to the RTC. Signed-off-by:
Julius Werner <jwerner@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some tty/serial driver fixes for 4.4-rc6 that resolve some reported problems. All of these have been in linux-next. The details are in the shortlog" * tag 'tty-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix GPF in flush_to_ldisc() serial: earlycon: Add missing spinlock initialization serial: sh-sci: Fix length of scatterlist n_tty: Fix poll() after buffer-limited eof push read serial: 8250_uniphier: fix dl_read and dl_write functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some USB and PHY fixes for 4.4-rc6. All of them resolve some reported problems. Full details in the shortlog" * tag 'usb-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: fix invalid memory access in hub_activate() USB: ipaq.c: fix a timeout loop phy: core: Get a refcount to phy in devm_of_phy_get_by_index() phy: cygnus: pcie: add missing of_node_put phy: miphy365x: add missing of_node_put phy: miphy28lp: add missing of_node_put phy: rockchip-usb: add missing of_node_put phy: berlin-sata: add missing of_node_put phy: mt65xx-usb3: add missing of_node_put phy: brcmstb-sata: add missing of_node_put phy: sun9i-usb: add USB dependency
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md fixes from Neil Brown: "Four fixes for md: - two recently introduced regressions fixed. - one older bug in RAID10 - tagged for -stable since 4.2 - one minor sysfs api improvement" * tag 'md/4.4-rc5-fixes' of git://neil.brown.name/md: Fix remove_and_add_spares removes drive added as spare in slot_store md: fix bug due to nested suspend MD: change journal disk role to disk 0 md/raid10: fix data corruption and crash during resync
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Partial revert of "powerpc: Individual System V IPC system calls" - pr_warn_once on unsupported OPAL_MSG type from Stewart - Fix deadlock in opal-irqchip introduced by "Fix double endian conversion" from Alistair * tag 'powerpc-4.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/opal-irqchip: Fix deadlock introduced by "Fix double endian conversion" powerpc/powernv: pr_warn_once on unsupported OPAL_MSG type Partial revert of "powerpc: Individual System V IPC system calls"
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A couple of reference counting bugs here, one in spidev and one with holding an extra reference in the core that we never freed if we removed a device, plus a driver specific fix. Both of the refcounting bugs are very old but they've only been found by observation so hopefully their impact has been low" * tag 'spi-fix-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fix parent-device reference leak spi: spidev: Hold spi_lock over all defererences of spi in release() spi-fsl-dspi: Fix CTAR Register access
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "Some GPIO fixes for the v4.4 series. Most prominent: I revert the error propagation from the .get() function until we can fix up all the drivers properly for v4.5. - Revert the error number propagation from the .get() vtable entry temporarily, until we make the proper fixes to all drivers. - Fix the clamping behaviour in the generic GPIO driver. - Driver fix for the ath79 driver" * tag 'gpio-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: revert get() to non-errorprogating behaviour gpio: generic: clamp values from bgpio_get_set() gpio: ath79: Fix the logic to clear offset bit of AR71XX_GPIO_REG_OE register
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: - Driver fixes for Freescale i.MX7D, Intel, Broadcom 2835 - One MAINTAINERS entry * tag 'pinctrl-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: MAINTAINERS: pinctrl: Add maintainers for pinctrl-single pinctrl: bcm2835: Fix initial value for direction_output pinctrl: intel: fix offset calculation issue of register PAD_OWN pinctrl: intel: fix bug of register offset calculation pinctrl: freescale: add ZERO_OFFSET_VALID flag for vf610 pinctrl
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "A set of 'usual' driver bugfixes for the I2C subsystem" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: rcar: disable runtime PM correctly in slave mode i2c: designware: Keep pm_runtime_enable/_disable calls in sync i2c: designware: fix IO timeout issue for AMD controller i2c: imx: init bus recovery info before adding i2c adapter i2c: do not use 0x in front of %pa i2c: davinci: Increase module clock frequency i2c: mv64xxx: The n clockdiv factor is 0 based on sunxi SoCs i2c: rk3x: populate correct variable for sda_falling_time
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: "Just a few assorted driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elants_i2c - fix wake-on-touch Input: elan_i2c - set input device's vendor and product IDs Input: sun4i-lradc-keys - fix typo in binding documentation Input: atmel_mxt_ts - add maxtouch to I2C table for module autoload Input: arizona-haptic - fix disabling of haptics device Input: aiptek - fix crash on detecting device without endpoints Input: atmel_mxt_ts - add generic platform data for Chromebooks Input: parkbd - clear unused function pointers Input: walkera0701 - clear unused function pointers Input: turbografx - clear unused function pointers Input: gamecon - clear unused function pointers Input: db9 - clear unused function pointers
-
- Dec 19, 2015
-
-
Wolfram Sang authored
When we also are I2C slave, we need to disable runtime PM because the address detection mechanism needs to be active all the time. However, we can reenable runtime PM once the slave instance was unregistered. So, use pm_runtime_get_sync/put to achieve this, since it has proper refcounting. pm_runtime_allow/forbid is like a global knob controllable from userspace which is unsuitable here. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix a potential regression introduced during the 4.3 cycle (generic power domains framework), a nasty bug that has been present forever (power capping RAPL driver), a build issue (Tegra cpufreq driver) and a minor ugliness introduced recently (intel_pstate). Specifics: - Fix a potential regression in the generic power domains framework introduced during the 4.3 development cycle that may lead to spurious failures of system suspend in certain situations (Ulf Hansson). - Fix a problem in the power capping RAPL (Running Average Power Limits) driver that causes it to initialize successfully on some systems where it is not supposed to do that which is due to an incorrect check in an initialization routine (Prarit Bhargava). - Fix a build problem in the cpufreq Tegra driver that depends on the regulator framework, but that dependency is not reflected in Kconfig (Arnd Bergmann). - Fix a recent mistake in the intel_pstate driver where a numeric constant is used directly instead of a symbol defined specifically for the case in question (Prarit Bhargava)" * tag 'pm+acpi-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap / RAPL: fix BIOS lock check cpufreq: intel_pstate: Minor cleanup for FRAC_BITS cpufreq: tegra: add regulator dependency for T124 PM / Domains: Allow runtime PM callbacks to be re-used during system PM
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Three fixes this time, two in SES picked up by KASAN for various types of buffer overrun. The first is a USB array which returns page 8 whatever is asked for and causes us to overrun with incorrect data format assumptions and the second is an invalid iteration of page 10 (the additional information page). The final fix is a reversion of a NULL deref fix which caused suspend/resume not to be called in pairs leading to incorrect device operation (Jens has queued a more proper fix for the problem in block)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: ses: fix additional element traversal bug Revert "SCSI: Fix NULL pointer dereference in runtime PM" ses: Fix problems with simple enclosures
-
James Chen authored
When sending "SLEEP" command to the controller it ceases scanning completely and is unable to wake the system up from sleep, so if it is configured as a wakeup source we should simply configure interrupt for wakeup and rely on idle logic within the controller to reduce power consumption while it is not used. Signed-off-by:
James Chen <james.chen@emc.com.tw> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab. * tag 'media/v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] airspy: increase USB control message buffer size [media] hackrf: move RF gain ctrl enable behind module parameter [media] hackrf: fix possible null ptr on debug printing [media] Revert "[media] ivtv: avoid going past input/audio array"
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "A couple of small fixes" * 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: check prepare_uptodate_page() error code earlier Btrfs: check for empty bitmap list in setup_cluster_bitmaps btrfs: fix misleading warning when space cache failed to load Btrfs: fix transaction handle leak in balance Btrfs: fix unprotected list move from unused_bgs to deleted_bgs list
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "Three patches" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: include/linux/mmdebug.h: should include linux/bug.h mm/zswap: change incorrect strncmp use to strcmp proc: fix -ESRCH error when writing to /proc/$pid/coredump_filter
-
James Morse authored
mmdebug.h uses BUILD_BUG_ON_INVALID(), assuming someone else included linux/bug.h. Include it ourselves. This saves build-failures such as: arch/arm64/include/asm/pgtable.h: In function 'set_pte_at': arch/arm64/include/asm/pgtable.h:281:3: error: implicit declaration of function 'BUILD_BUG_ON_INVALID' [-Werror=implicit-function-declaration] VM_WARN_ONCE(!pte_young(pte), Fixes: 02602a18 ("bug: completely remove code generated by disabled VM_BUG_ON()") Signed-off-by:
James Morse <james.morse@arm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Streetman authored
Change the use of strncmp in zswap_pool_find_get() to strcmp. The use of strncmp is no longer correct, now that zswap_zpool_type is not an array; sizeof() will return the size of a pointer, which isn't the right length to compare. We don't need to use strncmp anyway, because the existing params and the passed in params are all guaranteed to be null terminated, so strcmp should be used. Signed-off-by:
Dan Streetman <ddstreet@ieee.org> Reported-by:
Weijie Yang <weijie.yang@samsung.com> Cc: Seth Jennings <sjennings@variantweb.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Colin Ian King authored
Writing to /proc/$pid/coredump_filter always returns -ESRCH because commit 774636e1 ("proc: convert to kstrto*()/kstrto*_from_user()") removed the setting of ret after the get_proc_task call and incorrectly left it as -ESRCH. Instead, return 0 when successful. Example breakage: echo 0 > /proc/self/coredump_filter bash: echo: write error: No such process Fixes: 774636e1 ("proc: convert to kstrto*()/kstrto*_from_user()") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> [4.3+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'hwmon-for-linus-v4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Select CONFIG_BITREVERSE for sht15 driver to avoid build failure if it is not configured. - Force wait for conversion time for the first valid data in tmp102 driver to avoid reporting erroneous data to the thermal subsystem. * tag 'hwmon-for-linus-v4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (sht15) Select CONFIG_BITREVERSE hwmon: (tmp102) Force wait for conversion time for the first valid data
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU fixes from Joerg Roedel: "Two similar fixes for the Intel and AMD IOMMU drivers to add proper access checks before calling handle_mm_fault" * tag 'iommu-fixes-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Do access checks before calling handle_mm_fault() iommu/amd: Do proper access checking before calling handle_mm_fault()
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen bug fixes from David Vrabel: - XSA-155 security fixes to backend drivers. - XSA-157 security fixes to pciback. * tag 'for-linus-4.4-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-pciback: fix up cleanup path when alloc fails xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set. xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has MSI(X) enabled. xen/pciback: Do not install an IRQ handler for MSI interrupts. xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or MSI-X enabled xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or MSI-X enabled xen/pciback: Save xen_pci_op commands before processing it xen-scsiback: safely copy requests xen-blkback: read from indirect descriptors only once xen-blkback: only read request operation from shared ring once xen-netback: use RING_COPY_REQUEST() throughout xen-netback: don't use last request to determine minimum Tx credit xen: Add RING_COPY_REQUEST() xen/x86/pvh: Use HVM's flush_tlb_others op xen: Resume PMU from non-atomic context xen/events/fifo: Consume unprocessed events when a CPU dies
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC architecture fixes from Vineet Gupta: "Fixes for: - perf interrupts on SMP: Not enabled (at boot) and disabled (at runtime) - stack unwinder regression (for modules, ignoring dwarf3) - nsim hosed for non default kernel link base builds" * tag 'arc-fixes-for-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: smp: Rename platform hook @init_cpu_smp -> @init_per_cpu ARC: rename smp operation init_irq_cpu() to init_per_cpu() ARC: dw2 unwind: Ignore CIE version !=1 gracefully instead of bailing ARC: dw2 unwind: Reinstante unwinding out of modules ARC: [plat-sim] unbork non default CONFIG_LINUX_LINK_BASE ARC: intc: Document arc_request_percpu_irq() better ARCv2: perf: Ensure perf intr gets enabled on all cores ARC: intc: No need to clear IRQ_NOAUTOEN ARCv2: intc: Fix random perf irq disabling in SMP setup ARC: [axs10x] cap ethernet phy to 100 Mbit/sec
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "As usual in rc6, this update contains only a few HD-audio and USB-audio device-specific quirks: yet another Thinkpad noise fixes, Dell headphone mic fixes, and AudioQuest DragonFly fixes" * tag 'sound-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add a fixup for Thinkpad X1 Carbon 2nd ALSA: hda - Set codec to D3 at reboot/shutdown on Thinkpads ALSA: hda - Apply click noise workaround for Thinkpads generically ALSA: hda - Fix headphone mic input on a few Dell ALC293 machines ALSA: usb-audio: Add sample rate inquiry quirk for AudioQuest DragonFly ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull MTD fixes from Brian Norris: "I was holding out on this pull request for a bit, since there are a few other small issues being discussed that look like 4.4-rc regressions. Hopefully I can get those stabilized soon, but these are ready at any rate: - A little bit of a last-minute change for the device tree "fixed partition" binding. This is needed because we might want to reuse the 'partitions' subnode for other sorts of partitioning descriptions -- e.g., for describing which on-flash partition format(s) might be used on the system. - Also tone down a warning message, since it is probably going to show up on a lot of systems where it should just be ignored" * tag 'for-linus-20151217' of git://git.infradead.org/linux-mtd: doc: dt: mtd: partitions: add compatible property to "partitions" node mtd: ofpart: don't complain about missing 'partitions' node too loudly
-
Alan Stern authored
Commit 8520f380 ("USB: change hub initialization sleeps to delayed_work") changed the hub_activate() routine to make part of it run in a workqueue. However, the commit failed to take a reference to the usb_hub structure or to lock the hub interface while doing so. As a result, if a hub is plugged in and quickly unplugged before the work routine can run, the routine will try to access memory that has been deallocated. Or, if the hub is unplugged while the routine is running, the memory may be deallocated while it is in active use. This patch fixes the problem by taking a reference to the usb_hub at the start of hub_activate() and releasing it at the end (when the work is finished), and by locking the hub interface while the work routine is running. It also adds a check at the start of the routine to see if the hub has already been disconnected, in which nothing should be done. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Alexandru Cornea <alexandru.cornea@intel.com> Tested-by:
Alexandru Cornea <alexandru.cornea@intel.com> Fixes: 8520f380 ("USB: change hub initialization sleeps to delayed_work") CC: <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
The code expects the loop to end with "retries" set to zero but, because it is a post-op, it will end set to -1. I have fixed this by moving the decrement inside the loop. Fixes: 014aa2a3 ('USB: ipaq: minor ipaq_open() cleanup.') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Antti Palosaari authored
Driver requested device firmware version string during probe using only 24 byte long buffer. That buffer is too small for newer firmware versions, which causes device firmware hang - device stops responding to any commands after that. Increase buffer size to 128 which should be enough for any current and future version strings. Link: https://github.com/airspy/host/issues/27 Cc: <stable@vger.kernel.org> # 3.17+ Reported-by:
Benjamin Vernoux <bvernoux@gmail.com> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
Used Avago MGA-81563 RF amplifier could be destroyed pretty easily with too strong signal or transmitting to bad antenna. Add module parameter 'enable_rf_gain_ctrl' which allows enabling RF gain control - otherwise, default without the module parameter, RF gain control is set to 'grabbed' state which prevents setting value to the control. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
drivers/media/usb/hackrf/hackrf.c:1533 hackrf_probe() error: we previously assumed 'dev' could be null (see line 1366) Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
This patch broke ivtv logic, as reported at https://bugzilla.redhat.com/show_bug.cgi?id=1278942 This reverts commit 09290cc8 . Cc: stable@vger.kernel.org # for v4.1 and upper Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Greg Kroah-Hartman authored
Merge tag 'phy-for-4.4-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: for 4.4 -rc *) Add missing of_node_put in a bunch of PHY drivers *) Add get_device in devm_of_phy_get_by_index() *) Fix randconfig build error in sun9i usb driver
-