[ Upstream commit 6ad40b36 ]

kcm_exit_net() should call mutex_destroy() on knet->mutex. This is especially
needed if CONFIG_DEBUG_MUTEXES is enabled.

Fixes: ab7ac4eb

 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20230902170708.1727999-1-syoshida@redhat.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8fc134fe ]

When the plug qdisc is used as a class of the qfq qdisc it could trigger a
UAF. This issue can be reproduced with following commands:

  tc qdisc add dev lo root handle 1: qfq
  tc class add dev lo parent 1: classid 1:1 qfq weight 1 maxpkt 512
  tc qdisc add dev lo parent 1:1 handle 2: plug
  tc filter add dev lo parent 1: basic classid 1:1
  ping -c1 127.0.0.1

and boom:

[  285.353793] BUG: KASAN: slab-use-after-free in qfq_dequeue+0xa7/0x7f0
[  285.354910] Read of size 4 at addr ffff8880bad312a8 by task ping/144
[  285.355903]
[  285.356165] CPU: 1 PID: 144 Comm: ping Not tainted 6.5.0-rc3+ #4
[  285.357112] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
[  285.358376] Call Trace:
[  285.358773]  <IRQ>
[  285.359109]  dump_stack_lvl+0x44/0x60
[  285.359708]  print_address_description.constprop.0+0x2c/0x3c0
[  285.360611]  kasan_report+0x10c/0x120
[  285.361195]  ? qfq_dequeue+0xa7/0x7f0
[  285.361780]  qfq_dequeue+0xa7/0x7f0
[  285.362342]  __qdisc_run+0xf1/0x970
[  285.362903]  net_tx_action+0x28e/0x460
[  285.363502]  __do_softirq+0x11b/0x3de
[  285.364097]  do_softirq.part.0+0x72/0x90
[  285.364721]  </IRQ>
[  285.365072]  <TASK>
[  285.365422]  __local_bh_enable_ip+0x77/0x90
[  285.366079]  __dev_queue_xmit+0x95f/0x1550
[  285.366732]  ? __pfx_csum_and_copy_from_iter+0x10/0x10
[  285.367526]  ? __pfx___dev_queue_xmit+0x10/0x10
[  285.368259]  ? __build_skb_around+0x129/0x190
[  285.368960]  ? ip_generic_getfrag+0x12c/0x170
[  285.369653]  ? __pfx_ip_generic_getfrag+0x10/0x10
[  285.370390]  ? csum_partial+0x8/0x20
[  285.370961]  ? raw_getfrag+0xe5/0x140
[  285.371559]  ip_finish_output2+0x539/0xa40
[  285.372222]  ? __pfx_ip_finish_output2+0x10/0x10
[  285.372954]  ip_output+0x113/0x1e0
[  285.373512]  ? __pfx_ip_output+0x10/0x10
[  285.374130]  ? icmp_out_count+0x49/0x60
[  285.374739]  ? __pfx_ip_finish_output+0x10/0x10
[  285.375457]  ip_push_pending_frames+0xf3/0x100
[  285.376173]  raw_sendmsg+0xef5/0x12d0
[  285.376760]  ? do_syscall_64+0x40/0x90
[  285.377359]  ? __static_call_text_end+0x136578/0x136578
[  285.378173]  ? do_syscall_64+0x40/0x90
[  285.378772]  ? kasan_enable_current+0x11/0x20
[  285.379469]  ? __pfx_raw_sendmsg+0x10/0x10
[  285.380137]  ? __sock_create+0x13e/0x270
[  285.380673]  ? __sys_socket+0xf3/0x180
[  285.381174]  ? __x64_sys_socket+0x3d/0x50
[  285.381725]  ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  285.382425]  ? __rcu_read_unlock+0x48/0x70
[  285.382975]  ? ip4_datagram_release_cb+0xd8/0x380
[  285.383608]  ? __pfx_ip4_datagram_release_cb+0x10/0x10
[  285.384295]  ? preempt_count_sub+0x14/0xc0
[  285.384844]  ? __list_del_entry_valid+0x76/0x140
[  285.385467]  ? _raw_spin_lock_bh+0x87/0xe0
[  285.386014]  ? __pfx__raw_spin_lock_bh+0x10/0x10
[  285.386645]  ? release_sock+0xa0/0xd0
[  285.387148]  ? preempt_count_sub+0x14/0xc0
[  285.387712]  ? freeze_secondary_cpus+0x348/0x3c0
[  285.388341]  ? aa_sk_perm+0x177/0x390
[  285.388856]  ? __pfx_aa_sk_perm+0x10/0x10
[  285.389441]  ? check_stack_object+0x22/0x70
[  285.390032]  ? inet_send_prepare+0x2f/0x120
[  285.390603]  ? __pfx_inet_sendmsg+0x10/0x10
[  285.391172]  sock_sendmsg+0xcc/0xe0
[  285.391667]  __sys_sendto+0x190/0x230
[  285.392168]  ? __pfx___sys_sendto+0x10/0x10
[  285.392727]  ? kvm_clock_get_cycles+0x14/0x30
[  285.393328]  ? set_normalized_timespec64+0x57/0x70
[  285.393980]  ? _raw_spin_unlock_irq+0x1b/0x40
[  285.394578]  ? __x64_sys_clock_gettime+0x11c/0x160
[  285.395225]  ? __pfx___x64_sys_clock_gettime+0x10/0x10
[  285.395908]  ? _copy_to_user+0x3e/0x60
[  285.396432]  ? exit_to_user_mode_prepare+0x1a/0x120
[  285.397086]  ? syscall_exit_to_user_mode+0x22/0x50
[  285.397734]  ? do_syscall_64+0x71/0x90
[  285.398258]  __x64_sys_sendto+0x74/0x90
[  285.398786]  do_syscall_64+0x64/0x90
[  285.399273]  ? exit_to_user_mode_prepare+0x1a/0x120
[  285.399949]  ? syscall_exit_to_user_mode+0x22/0x50
[  285.400605]  ? do_syscall_64+0x71/0x90
[  285.401124]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  285.401807] RIP: 0033:0x495726
[  285.402233] Code: ff ff ff f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 09
[  285.404683] RSP: 002b:00007ffcc25fb618 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[  285.405677] RAX: ffffffffffffffda RBX: 0000000000000040 RCX: 0000000000495726
[  285.406628] RDX: 0000000000000040 RSI: 0000000002518750 RDI: 0000000000000000
[  285.407565] RBP: 00000000005205ef R08: 00000000005f8838 R09: 000000000000001c
[  285.408523] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000002517634
[  285.409460] R13: 00007ffcc25fb6f0 R14: 0000000000000003 R15: 0000000000000000
[  285.410403]  </TASK>
[  285.410704]
[  285.410929] Allocated by task 144:
[  285.411402]  kasan_save_stack+0x1e/0x40
[  285.411926]  kasan_set_track+0x21/0x30
[  285.412442]  __kasan_slab_alloc+0x55/0x70
[  285.412973]  kmem_cache_alloc_node+0x187/0x3d0
[  285.413567]  __alloc_skb+0x1b4/0x230
[  285.414060]  __ip_append_data+0x17f7/0x1b60
[  285.414633]  ip_append_data+0x97/0xf0
[  285.415144]  raw_sendmsg+0x5a8/0x12d0
[  285.415640]  sock_sendmsg+0xcc/0xe0
[  285.416117]  __sys_sendto+0x190/0x230
[  285.416626]  __x64_sys_sendto+0x74/0x90
[  285.417145]  do_syscall_64+0x64/0x90
[  285.417624]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[  285.418306]
[  285.418531] Freed by task 144:
[  285.418960]  kasan_save_stack+0x1e/0x40
[  285.419469]  kasan_set_track+0x21/0x30
[  285.419988]  kasan_save_free_info+0x27/0x40
[  285.420556]  ____kasan_slab_free+0x109/0x1a0
[  285.421146]  kmem_cache_free+0x1c2/0x450
[  285.421680]  __netif_receive_skb_core+0x2ce/0x1870
[  285.422333]  __netif_receive_skb_one_core+0x97/0x140
[  285.423003]  process_backlog+0x100/0x2f0
[  285.423537]  __napi_poll+0x5c/0x2d0
[  285.424023]  net_rx_action+0x2be/0x560
[  285.424510]  __do_softirq+0x11b/0x3de
[  285.425034]
[  285.425254] The buggy address belongs to the object at ffff8880bad31280
[  285.425254]  which belongs to the cache skbuff_head_cache of size 224
[  285.426993] The buggy address is located 40 bytes inside of
[  285.426993]  freed 224-byte region [ffff8880bad31280, ffff8880bad31360)
[  285.428572]
[  285.428798] The buggy address belongs to the physical page:
[  285.429540] page:00000000f4b77674 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xbad31
[  285.430758] flags: 0x100000000000200(slab|node=0|zone=1)
[  285.431447] page_type: 0xffffffff()
[  285.431934] raw: 0100000000000200 ffff88810094a8c0 dead000000000122 0000000000000000
[  285.432757] raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
[  285.433562] page dumped because: kasan: bad access detected
[  285.434144]
[  285.434320] Memory state around the buggy address:
[  285.434828]  ffff8880bad31180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  285.435580]  ffff8880bad31200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  285.436264] >ffff8880bad31280: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  285.436777]                                   ^
[  285.437106]  ffff8880bad31300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[  285.437616]  ffff8880bad31380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  285.438126] ==================================================================
[  285.438662] Disabling lock debugging due to kernel taint

Fix this by:
1. Changing sch_plug's .peek handler to qdisc_peek_dequeued(), a
function compatible with non-work-conserving qdiscs
2. Checking the return value of qdisc_dequeue_peeked() in sch_qfq.

Fixes: 462dbc91

 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Reported-by: valis <sec@valis.email>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230901162237.11525-1-jhs@mojatatu.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b1928129 ]

As with sk->sk_shutdown shown in the previous patch, sk->sk_err can be
read locklessly by unix_dgram_sendmsg().

Let's use READ_ONCE() for sk_err as well.

Note that the writer side is marked by commit cc04410a ("af_unix:
annotate lockless accesses to sk->sk_err").

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit afe8764f ]

sk->sk_shutdown is changed under unix_state_lock(sk), but
unix_dgram_sendmsg() calls two functions to read sk_shutdown locklessly.

  sock_alloc_send_pskb
  `- sock_wait_for_wmem

Let's use READ_ONCE() there.

Note that the writer side was marked by commit e1d09c2c ("af_unix:
Fix data races around sk->sk_shutdown.").

BUG: KCSAN: data-race in sock_alloc_send_pskb / unix_release_sock

write (marked) to 0xffff8880069af12c of 1 bytes by task 1 on cpu 1:
 unix_release_sock+0x75c/0x910 net/unix/af_unix.c:631
 unix_release+0x59/0x80 net/unix/af_unix.c:1053
 __sock_release+0x7d/0x170 net/socket.c:654
 sock_close+0x19/0x30 net/socket.c:1386
 __fput+0x2a3/0x680 fs/file_table.c:384
 ____fput+0x15/0x20 fs/file_table.c:412
 task_work_run+0x116/0x1a0 kernel/task_work.c:179
 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
 exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204
 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline]
 syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297
 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

read to 0xffff8880069af12c of 1 bytes by task 28650 on cpu 0:
 sock_alloc_send_pskb+0xd2/0x620 net/core/sock.c:2767
 unix_dgram_sendmsg+0x2f8/0x14f0 net/unix/af_unix.c:1944
 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline]
 unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292
 sock_sendmsg_nosec net/socket.c:725 [inline]
 sock_sendmsg+0x148/0x160 net/socket.c:748
 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494
 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548
 __sys_sendmsg+0x94/0x140 net/socket.c:2577
 __do_sys_sendmsg net/socket.c:2586 [inline]
 __se_sys_sendmsg net/socket.c:2584 [inline]
 __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

value changed: 0x00 -> 0x03

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 28650 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ade32bd8 ]

unix_tot_inflight is changed under spin_lock(unix_gc_lock), but
unix_release_sock() reads it locklessly.

Let's use READ_ONCE() for unix_tot_inflight.

Note that the writer side was marked by commit 9d6d7f1c ("af_unix:
annote lockless accesses to unix_tot_inflight & gc_in_progress")

BUG: KCSAN: data-race in unix_inflight / unix_release_sock

write (marked) to 0xffffffff871852b8 of 4 bytes by task 123 on cpu 1:
 unix_inflight+0x130/0x180 net/unix/scm.c:64
 unix_attach_fds+0x137/0x1b0 net/unix/scm.c:123
 unix_scm_to_skb net/unix/af_unix.c:1832 [inline]
 unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1955
 sock_sendmsg_nosec net/socket.c:724 [inline]
 sock_sendmsg+0x148/0x160 net/socket.c:747
 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2493
 ___sys_sendmsg+0xc6/0x140 net/socket.c:2547
 __sys_sendmsg+0x94/0x140 net/socket.c:2576
 __do_sys_sendmsg net/socket.c:2585 [inline]
 __se_sys_sendmsg net/socket.c:2583 [inline]
 __x64_sys_sendmsg+0x45/0x50 net/socket.c:2583
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

read to 0xffffffff871852b8 of 4 bytes by task 4891 on cpu 0:
 unix_release_sock+0x608/0x910 net/unix/af_unix.c:671
 unix_release+0x59/0x80 net/unix/af_unix.c:1058
 __sock_release+0x7d/0x170 net/socket.c:653
 sock_close+0x19/0x30 net/socket.c:1385
 __fput+0x179/0x5e0 fs/file_table.c:321
 ____fput+0x15/0x20 fs/file_table.c:349
 task_work_run+0x116/0x1a0 kernel/task_work.c:179
 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
 exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204
 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline]
 syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297
 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

value changed: 0x00000000 -> 0x00000001

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 4891 Comm: systemd-coredum Not tainted 6.4.0-rc5-01219-gfa0e21fa4443 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

Fixes: 9305cfa4

 ("[AF_UNIX]: Make unix_tot_inflight counter non-atomic")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0bc36c06 ]

user->unix_inflight is changed under spin_lock(unix_gc_lock),
but too_many_unix_fds() reads it locklessly.

Let's annotate the write/read accesses to user->unix_inflight.

BUG: KCSAN: data-race in unix_attach_fds / unix_inflight

write to 0xffffffff8546f2d0 of 8 bytes by task 44798 on cpu 1:
 unix_inflight+0x157/0x180 net/unix/scm.c:66
 unix_attach_fds+0x147/0x1e0 net/unix/scm.c:123
 unix_scm_to_skb net/unix/af_unix.c:1827 [inline]
 unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950
 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline]
 unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292
 sock_sendmsg_nosec net/socket.c:725 [inline]
 sock_sendmsg+0x148/0x160 net/socket.c:748
 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494
 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548
 __sys_sendmsg+0x94/0x140 net/socket.c:2577
 __do_sys_sendmsg net/socket.c:2586 [inline]
 __se_sys_sendmsg net/socket.c:2584 [inline]
 __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

read to 0xffffffff8546f2d0 of 8 bytes by task 44814 on cpu 0:
 too_many_unix_fds net/unix/scm.c:101 [inline]
 unix_attach_fds+0x54/0x1e0 net/unix/scm.c:110
 unix_scm_to_skb net/unix/af_unix.c:1827 [inline]
 unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950
 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline]
 unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292
 sock_sendmsg_nosec net/socket.c:725 [inline]
 sock_sendmsg+0x148/0x160 net/socket.c:748
 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494
 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548
 __sys_sendmsg+0x94/0x140 net/socket.c:2577
 __do_sys_sendmsg net/socket.c:2586 [inline]
 __se_sys_sendmsg net/socket.c:2584 [inline]
 __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

value changed: 0x000000000000000c -> 0x000000000000000d

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 44814 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

Fixes: 712f4aad

 ("unix: properly account for FDs passed over unix sockets")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f31867d0 ]

The existing code incorrectly casted a negative value (the result of a
subtraction) to an unsigned value without checking. For example, if
/proc/sys/net/ipv6/conf/*/temp_prefered_lft was set to 1, the preferred
lifetime would jump to 4 billion seconds. On my machine and network the
shortest lifetime that avoided underflow was 3 seconds.

Fixes: 76506a98

 ("IPv6: fix DESYNC_FACTOR")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 151e887d ]

The veth_xmit function returns NETDEV_TX_OK even when packets are dropped.
This behavior leads to incorrect calculations of statistics counts, as
well as things like txq->trans_start updates.

Fixes: e314dbdc

 ("[NET]: Virtual ethernet device driver.")
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fa09bc40 ]

Disable virtualization features on 82580 just as on i210/i211.
This avoids that virt functions are acidentally called on 82850.

Fixes: 55cac248

 ("igb: Add full support for 82580 devices")
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a3e0fdf7 ]

syzbot is playing with IPV6_ADDRFORM quite a lot these days,
and managed to hit the WARN_ON_ONCE(1) in sk_mc_loop()

We have many more similar issues to fix.

WARNING: CPU: 1 PID: 1593 at net/core/sock.c:782 sk_mc_loop+0x165/0x260
Modules linked in:
CPU: 1 PID: 1593 Comm: kworker/1:3 Not tainted 6.1.40-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
Workqueue: events_power_efficient gc_worker
RIP: 0010:sk_mc_loop+0x165/0x260 net/core/sock.c:782
Code: 34 1b fd 49 81 c7 18 05 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 20 00 74 08 4c 89 ff e8 25 36 6d fd 4d 8b 37 eb 13 e8 db 33 1b fd <0f> 0b b3 01 eb 34 e8 d0 33 1b fd 45 31 f6 49 83 c6 38 4c 89 f0 48
RSP: 0018:ffffc90000388530 EFLAGS: 00010246
RAX: ffffffff846d9b55 RBX: 0000000000000011 RCX: ffff88814f884980
RDX: 0000000000000102 RSI: ffffffff87ae5160 RDI: 0000000000000011
RBP: ffffc90000388550 R08: 0000000000000003 R09: ffffffff846d9a65
R10: 0000000000000002 R11: ffff88814f884980 R12: dffffc0000000000
R13: ffff88810dbee000 R14: 0000000000000010 R15: ffff888150084000
FS: 0000000000000000(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000180 CR3: 000000014ee5b000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
[<ffffffff8507734f>] ip6_finish_output2+0x33f/0x1ae0 net/ipv6/ip6_output.c:83
[<ffffffff85062766>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline]
[<ffffffff85062766>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211
[<ffffffff85061f8c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline]
[<ffffffff85061f8c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232
[<ffffffff852071cf>] dst_output include/net/dst.h:444 [inline]
[<ffffffff852071cf>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161
[<ffffffff83618fb4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline]
[<ffffffff83618fb4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline]
[<ffffffff83618fb4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
[<ffffffff83618fb4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677
[<ffffffff8361ddd9>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229
[<ffffffff84763fc0>] netdev_start_xmit include/linux/netdevice.h:4925 [inline]
[<ffffffff84763fc0>] xmit_one net/core/dev.c:3644 [inline]
[<ffffffff84763fc0>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660
[<ffffffff8494c650>] sch_direct_xmit+0x2a0/0x9c0 net/sched/sch_generic.c:342
[<ffffffff8494d883>] qdisc_restart net/sched/sch_generic.c:407 [inline]
[<ffffffff8494d883>] __qdisc_run+0xb13/0x1e70 net/sched/sch_generic.c:415
[<ffffffff8478c426>] qdisc_run+0xd6/0x260 include/net/pkt_sched.h:125
[<ffffffff84796eac>] net_tx_action+0x7ac/0x940 net/core/dev.c:5247
[<ffffffff858002bd>] __do_softirq+0x2bd/0x9bd kernel/softirq.c:599
[<ffffffff814c3fe8>] invoke_softirq kernel/softirq.c:430 [inline]
[<ffffffff814c3fe8>] __irq_exit_rcu+0xc8/0x170 kernel/softirq.c:683
[<ffffffff814c3f09>] irq_exit_rcu+0x9/0x20 kernel/softirq.c:695

Fixes: 7ad6848c

 ("ip: fix mc_loop checks for tunnels with multicast outer addresses")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230830101244.1146934-1-edumazet@google.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fce92af1 ]

syzbot complained about a data-race in fib_table_lookup() [1]

Add appropriate annotations to document it.

[1]
BUG: KCSAN: data-race in fib_release_info / fib_table_lookup

write to 0xffff888150f31744 of 1 bytes by task 1189 on cpu 0:
fib_release_info+0x3a0/0x460 net/ipv4/fib_semantics.c:281
fib_table_delete+0x8d2/0x900 net/ipv4/fib_trie.c:1777
fib_magic+0x1c1/0x1f0 net/ipv4/fib_frontend.c:1106
fib_del_ifaddr+0x8cf/0xa60 net/ipv4/fib_frontend.c:1317
fib_inetaddr_event+0x77/0x200 net/ipv4/fib_frontend.c:1448
notifier_call_chain kernel/notifier.c:93 [inline]
blocking_notifier_call_chain+0x90/0x200 kernel/notifier.c:388
__inet_del_ifa+0x4df/0x800 net/ipv4/devinet.c:432
inet_del_ifa net/ipv4/devinet.c:469 [inline]
inetdev_destroy net/ipv4/devinet.c:322 [inline]
inetdev_event+0x553/0xaf0 net/ipv4/devinet.c:1606
notifier_call_chain kernel/notifier.c:93 [inline]
raw_notifier_call_chain+0x6b/0x1c0 kernel/notifier.c:461
call_netdevice_notifiers_info net/core/dev.c:1962 [inline]
call_netdevice_notifiers_mtu+0xd2/0x130 net/core/dev.c:2037
dev_set_mtu_ext+0x30b/0x3e0 net/core/dev.c:8673
do_setlink+0x5be/0x2430 net/core/rtnetlink.c:2837
rtnl_setlink+0x255/0x300 net/core/rtnetlink.c:3177
rtnetlink_rcv_msg+0x807/0x8c0 net/core/rtnetlink.c:6445
netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2549
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6463
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1914
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
sock_write_iter+0x1aa/0x230 net/socket.c:1129
do_iter_write+0x4b4/0x7b0 fs/read_write.c:860
vfs_writev+0x1a8/0x320 fs/read_write.c:933
do_writev+0xf8/0x220 fs/read_write.c:976
__do_sys_writev fs/read_write.c:1049 [inline]
__se_sys_writev fs/read_write.c:1046 [inline]
__x64_sys_writev+0x45/0x50 fs/read_write.c:1046
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read to 0xffff888150f31744 of 1 bytes by task 21839 on cpu 1:
fib_table_lookup+0x2bf/0xd50 net/ipv4/fib_trie.c:1585
fib_lookup include/net/ip_fib.h:383 [inline]
ip_route_output_key_hash_rcu+0x38c/0x12c0 net/ipv4/route.c:2751
ip_route_output_key_hash net/ipv4/route.c:2641 [inline]
__ip_route_output_key include/net/route.h:134 [inline]
ip_route_output_flow+0xa6/0x150 net/ipv4/route.c:2869
send4+0x1e7/0x500 drivers/net/wireguard/socket.c:61
wg_socket_send_skb_to_peer+0x94/0x130 drivers/net/wireguard/socket.c:175
wg_socket_send_buffer_to_peer+0xd6/0x100 drivers/net/wireguard/socket.c:200
wg_packet_send_handshake_initiation drivers/net/wireguard/send.c:40 [inline]
wg_packet_handshake_send_worker+0x10c/0x150 drivers/net/wireguard/send.c:51
process_one_work+0x434/0x860 kernel/workqueue.c:2600
worker_thread+0x5f2/0xa10 kernel/workqueue.c:2751
kthread+0x1d7/0x210 kernel/kthread.c:389
ret_from_fork+0x2e/0x40 arch/x86/kernel/process.c:145
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

value changed: 0x00 -> 0x01

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 21839 Comm: kworker/u4:18 Tainted: G W 6.5.0-syzkaller #0

Fixes: dccd9ecc

 ("ipv4: Do not use dead fib_info entries.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230830095520.1046984-1-edumazet@google.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit dc9511dd ]

sk->sk_wmem_queued can be read locklessly from sctp_poll()

Use sk_wmem_queued_add() when the field is changed,
and add READ_ONCE() annotations in sctp_writeable()
and sctp_assocs_seq_show()

syzbot reported:

BUG: KCSAN: data-race in sctp_poll / sctp_wfree

read-write to 0xffff888149d77810 of 4 bytes by interrupt on cpu 0:
sctp_wfree+0x170/0x4a0 net/sctp/socket.c:9147
skb_release_head_state+0xb7/0x1a0 net/core/skbuff.c:988
skb_release_all net/core/skbuff.c:1000 [inline]
__kfree_skb+0x16/0x140 net/core/skbuff.c:1016
consume_skb+0x57/0x180 net/core/skbuff.c:1232
sctp_chunk_destroy net/sctp/sm_make_chunk.c:1503 [inline]
sctp_chunk_put+0xcd/0x130 net/sctp/sm_make_chunk.c:1530
sctp_datamsg_put+0x29a/0x300 net/sctp/chunk.c:128
sctp_chunk_free+0x34/0x50 net/sctp/sm_make_chunk.c:1515
sctp_outq_sack+0xafa/0xd70 net/sctp/outqueue.c:1381
sctp_cmd_process_sack net/sctp/sm_sideeffect.c:834 [inline]
sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1366 [inline]
sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline]
sctp_do_sm+0x12c7/0x31b0 net/sctp/sm_sideeffect.c:1169
sctp_assoc_bh_rcv+0x2b2/0x430 net/sctp/associola.c:1051
sctp_inq_push+0x108/0x120 net/sctp/inqueue.c:80
sctp_rcv+0x116e/0x1340 net/sctp/input.c:243
sctp6_rcv+0x25/0x40 net/sctp/ipv6.c:1120
ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437
ip6_input_finish net/ipv6/ip6_input.c:482 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491
dst_input include/net/dst.h:468 [inline]
ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:303 [inline]
ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5452 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566
process_backlog+0x21f/0x380 net/core/dev.c:5894
__napi_poll+0x60/0x3b0 net/core/dev.c:6460
napi_poll net/core/dev.c:6527 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6660
__do_softirq+0xc1/0x265 kernel/softirq.c:553
run_ksoftirqd+0x17/0x20 kernel/softirq.c:921
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:389
ret_from_fork+0x2e/0x40 arch/x86/kernel/process.c:145
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

read to 0xffff888149d77810 of 4 bytes by task 17828 on cpu 1:
sctp_writeable net/sctp/socket.c:9304 [inline]
sctp_poll+0x265/0x410 net/sctp/socket.c:8671
sock_poll+0x253/0x270 net/socket.c:1374
vfs_poll include/linux/poll.h:88 [inline]
do_pollfd fs/select.c:873 [inline]
do_poll fs/select.c:921 [inline]
do_sys_poll+0x636/0xc00 fs/select.c:1015
__do_sys_ppoll fs/select.c:1121 [inline]
__se_sys_ppoll+0x1af/0x1f0 fs/select.c:1101
__x64_sys_ppoll+0x67/0x80 fs/select.c:1101
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x00019e80 -> 0x0000cc80

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 17828 Comm: syz-executor.1 Not tainted 6.5.0-rc7-syzkaller-00185-g28f20a19294d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20230830094519.950007-1-edumazet@google.com


Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4aae44f6

 ]

Because LPC32xx PWM controllers have only a single output which is
registered as the only PWM device/channel per controller, it is known in
advance that pwm->hwpwm value is always 0. On basis of this fact
simplify the code by removing operations with pwm->hwpwm, there is no
controls which require channel number as input.

Even though I wasn't aware at the time when I forward ported that patch,
this fixes a null pointer dereference as lpc32xx->chip.pwms is NULL
before devm_pwmchip_add() is called.

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 3d2813fb

 ("pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was registered")
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit cf38e769 ]

When built with CONFIG_INTEL_MID_WATCHDOG=m, currently the driver
needs to be loaded manually, for the lack of module alias.
This causes unintended resets in cases where watchdog timer is
set-up by bootloader and the driver is not explicitly loaded.
Add MODULE_ALIAS() to load the driver automatically at boot and
avoid this issue.

Fixes: 87a1ef80

 ("watchdog: add Intel MID watchdog driver support")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230811120220.31578-1-raag.jadav@intel.com


Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ef23cb59 ]

While debugging a segfault on 'perf lock contention' without an
available perf.data file I noticed that it was basically calling:

	perf_session__delete(ERR_PTR(-1))

Resulting in:

  (gdb) run lock contention
  Starting program: /root/bin/perf lock contention
  [Thread debugging using libthread_db enabled]
  Using host libthread_db library "/lib64/libthread_db.so.1".
  failed to open perf.data: No such file or directory  (try 'perf record' first)
  Initializing perf session failed

  Program received signal SIGSEGV, Segmentation fault.
  0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
  2858		if (!session->auxtrace)
  (gdb) p session
  $1 = (struct perf_session *) 0xffffffffffffffff
  (gdb) bt
  #0  0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
  #1  0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300
  #2  0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161
  #3  0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604
  #4  0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322
  #5  0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375
  #6  0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419
  #7  0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535
  (gdb)

So just set it to NULL after using PTR_ERR(session) to decode the error
as perf_session__delete(NULL) is supported.

The same problem was found in 'perf top' after an audit of all
perf_session__new() failure handling.

Fixes: 6ef81c55 ("perf session: Return error code for perf_session__new() function on failure")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mukesh Ojha <mojha@codeaurora.org>
Cc: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Shawn Landden <shawn@git.icu>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: https://lore.kernel.org/lkml/ZN4Q2rxxsL08A8rd@kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5df8ecfe ]

Drop the explicit check on the extended CPUID level in cpu_has_svm(), the
kernel's cached CPUID info will leave the entire SVM leaf unset if said
leaf is not supported by hardware.  Prior to using cached information,
the check was needed to avoid false positives due to Intel's rather crazy
CPUID behavior of returning the values of the maximum supported leaf if
the specified leaf is unsupported.

Fixes: 682a8108 ("x86/kvm/svm: Simplify cpu_has_svm()")
Link: https://lore.kernel.org/r/20230721201859.2307736-13-seanjc@google.com


Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 979e9c9f ]

In 616b14b4 ("perf build: Conditionally define NDEBUG") we
started using NDEBUG=1 when DEBUG=1 isn't present, so code that is
enclosed with assert() is not called.

In dd317df0 ("perf build: Make binutil libraries opt in") we
stopped linking against binutils-devel, for licensing reasons.

Recently people asked me why annotation of BPF programs wasn't working,
i.e. this:

  $ perf annotate bpf_prog_5280546344e3f45c_kfree_skb

was returning:

  case SYMBOL_ANNOTATE_ERRNO__NO_LIBOPCODES_FOR_BPF:
     scnprintf(buf, buflen, "Please link with binutils's libopcode to enable BPF annotation");

This was on a fedora rpm, so its new enough that I had to try to test by
rebuilding using BUILD_NONDISTRO=1, only to get it segfaulting on me.

This combination made this libopcode function not to be called:

        assert(bfd_check_format(bfdf, bfd_object));

Changing it to:

	if (!bfd_check_format(bfdf, bfd_object))
		abort();

Made it work, looking at this "check" function made me realize it
changes the 'bfdf' internal state, i.e. we better call it.

So stop using assert() on it, just call it and abort if it fails.

Probably it is better to propagate the error, etc, but it seems it is
unlikely to fail from the usage done so far and we really need to stop
using libopcodes, so do the quick fix above and move on.

With it we have BPF annotation back working when built with
BUILD_NONDISTRO=1:

  ⬢[acme@toolbox perf-tools-next]$ perf annotate --stdio2 bpf_prog_5280546344e3f45c_kfree_skb   | head
  No kallsyms or vmlinux with build-id 939bc71a1a51cdc434e60af93c7e734f7d5c0e7e was found
  Samples: 12  of event 'cpu-clock:ppp', 4000 Hz, Event count (approx.): 3000000, [percent: local period]
  bpf_prog_5280546344e3f45c_kfree_skb() bpf_prog_5280546344e3f45c_kfree_skb
  Percent      int kfree_skb(struct trace_event_raw_kfree_skb *args) {
                 nop
   33.33         xchg   %ax,%ax
                 push   %rbp
                 mov    %rsp,%rbp
                 sub    $0x180,%rsp
                 push   %rbx
                 push   %r13
  ⬢[acme@toolbox perf-tools-next]$

Fixes: 6987561c ("perf annotate: Enable annotation of BPF programs")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mohamed Mahmoud <mmahmoud@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Dave Tucker <datucker@redhat.com>
Cc: Derek Barbosa <debarbos@redhat.com>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/lkml/ZMrMzoQBe0yqMek1@kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a3b7039b ]

Buffer 'new_argv' is accessed without bound check after accessing with
bound check via 'new_argc' index.

Fixes: e298f3b4

 ("kconfig: add built-in function support")
Co-developed-by: Ivanov Mikhail <ivanov.mikhail1@huawei-partners.com>
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 96562c45

 upstream.

It is an almost improbable error case but when page allocating loop in
nfs4_get_device_info() fails then we should only free the already
allocated pages, as __free_page() can't deal with NULL arguments.

Found by Linux Verification Center (linuxtesting.org).

Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8d207400 upstream.

The QMI TLV value for strings in a lot of qmi element info structures
account for null terminated strings with MAX_LEN + 1. If a string is
actually MAX_LEN + 1 length, this will cause an out of bounds access
when the NULL character is appended in decoding.

Fixes: 9b8a11e8

 ("soc: qcom: Introduce QMI encoder/decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Link: https://lore.kernel.org/r/20230801064712.3590128-1-quic_ipkumar@quicinc.com


Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1583694b upstream.

The pll0_vote clock definitely should have pll0 as a parent (instead of
pll8).

Fixes: 7792a8d6

 ("clk: mdm9615: Add support for MDM9615 Clock Controllers")
Cc: stable@kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230512211727.3445575-7-dmitry.baryshkov@linaro.org


Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 358ad816

 upstream.

Older PA-RISC machines have LEDs which show the disk- and LAN-activity.
The computation is done in software and takes quite some time, e.g. on a
J6500 this may take up to 60% time of one CPU if the machine is loaded
via network traffic.

Since most people don't care about the LEDs, start with LEDs disabled and
just show a CPU heartbeat LED. The disk and LAN LEDs can be turned on
manually via /proc/pdc/led.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4db89524

 upstream.

Fix the LAN receive and LAN transmit LEDs, which where swapped
up to now.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit efb78fa8 upstream.

test_pages() tests the page allocator by calling alloc_pages() with
different orders up to order 10.

However, different architectures and platforms support different maximum
contiguous allocation sizes.  The default maximum allocation order
(MAX_ORDER) is 10, but architectures can use CONFIG_ARCH_FORCE_MAX_ORDER
to override this.  On platforms where this is less than 10, test_meminit()
will blow up with a WARN().  This is expected, so let's not do that.

Replace the hardcoded "10" with the MAX_ORDER macro so that we test
allocations up to the expected platform limit.

Link: https://lkml.kernel.org/r/20230714015238.47931-1-ajd@linux.ibm.com
Fixes: 5015a300

 ("lib: introduce test_meminit module")
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Xiaoke Wang <xkernel.wang@foxmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4cfe75f0

 upstream.

Fix the test for the AST2200 in the DRAM initialization. The value
in ast->chip has to be compared against an enum constant instead of
a numerical value.

This bug got introduced when the driver was first imported into the
kernel.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 312fec14

 ("drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)")
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.5+
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600
Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-2-tzimmermann@suse.de


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f90a0e52

 upstream.

Do not assing the Linux device to struct fb_info.dev. The call to
register_framebuffer() initializes the field to the fbdev device.
Drivers should not override its value.

Fixes a bug where the driver incorrectly decreases the hardware
device's reference counter and leaks the fbdev device.

v2:
	* add Fixes tag (Dan)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 88017bda

 ("ep93xx video driver")
Cc: <stable@vger.kernel.org> # v2.6.32+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-15-tzimmermann@suse.de


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e9105c4b

 upstream.

User accidently passed module parameter ql2xenabledif=1 which is
unsupported. However, driver still initialized which lead to guard tag
errors during device discovery.

Remove unsupported ql2xenabledif=1 option and validate the user input.

Cc: stable@vger.kernel.org
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230821130045.34850-7-njavali@marvell.com


Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8ebaa451

 upstream.

Some consider noisy log as test failure.  Turn off noisy message log.

Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230714070104.40052-8-njavali@marvell.com


Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5b51f35d

 upstream.

Link up failure occurred where driver failed to see certain events from FW
indicating link up (AEN 8011) and fabric login completion (AEN 8014).
Without these 2 events, driver would not proceed forward to scan the
fabric. The cause of this is due to delay in the receive of interrupt for
Mailbox 60 that causes qla to set the fw_started flag late.  The late
setting of this flag causes other interrupts to be dropped.  These dropped
interrupts happen to be the link up (AEN 8011) and fabric login completion
(AEN 8014).

Set fw_started flag early to prevent interrupts being dropped.

Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230714070104.40052-6-njavali@marvell.com


Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 009e7fe4

 upstream.

Different behavior were experienced of session being torn down vs not when
TMF is timed out. When FW detects the time out, the session is torn down.
When driver detects the time out, the session is not torn down.

Allow TMF error to return to upper layer without session tear down.

Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230714070104.40052-10-njavali@marvell.com


Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a5e2151f upstream.

__skb_get_hash_symmetric() was added to compute a symmetric hash over
the protocol, addresses and transport ports, by commit eb70db87
("packet: Use symmetric hash for PACKET_FANOUT_HASH."). It uses
flow_keys_dissector_symmetric_keys as the flow_dissector to incorporate
IPv4 addresses, IPv6 addresses and ports. However, it should not specify
the flag as FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL, which stops further
dissection when an IPv6 flow label is encountered, making transport
ports not being incorporated in such case.

As a consequence, the symmetric hash is based on 5-tuple for IPv4 but
3-tuple for IPv6 when flow label is present. It caused a few problems,
e.g. when nft symhash and openvswitch l4_sym rely on the symmetric hash
to perform load balancing as different L4 flows between two given IPv6
addresses would always get the same symmetric hash, leading to uneven
traffic distribution.

Removing the use of FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL makes sure the
symmetric hash is based on 5-tuple for both IPv4 and IPv6 consistently.

Fixes: eb70db87

 ("packet: Use symmetric hash for PACKET_FANOUT_HASH.")
Reported-by: Lars Ekman <uablrek@gmail.com>
Closes: https://github.com/antrea-io/antrea/issues/5457


Signed-off-by: Quan Tian <qtian@vmware.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit da62cb72

 upstream.

I got a use-after-free report when doing some fuzz test:

If ttm_bo_init() fails, the "gbo" and "gbo->bo.base" will be
freed by ttm_buffer_object_destroy() in ttm_bo_init(). But
then drm_gem_vram_create() and drm_gem_vram_init() will free
"gbo" and "gbo->bo.base" again.

BUG: KMSAN: use-after-free in drm_vma_offset_remove+0xb3/0x150
CPU: 0 PID: 24282 Comm: syz-executor.1 Tainted: G    B   W         5.7.0-rc4-msan #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack
 dump_stack+0x1c9/0x220
 kmsan_report+0xf7/0x1e0
 __msan_warning+0x58/0xa0
 drm_vma_offset_remove+0xb3/0x150
 drm_gem_free_mmap_offset
 drm_gem_object_release+0x159/0x180
 drm_gem_vram_init
 drm_gem_vram_create+0x7c5/0x990
 drm_gem_vram_fill_create_dumb
 drm_gem_vram_driver_dumb_create+0x238/0x590
 drm_mode_create_dumb
 drm_mode_create_dumb_ioctl+0x41d/0x450
 drm_ioctl_kernel+0x5a4/0x710
 drm_ioctl+0xc6f/0x1240
 vfs_ioctl
 ksys_ioctl
 __do_sys_ioctl
 __se_sys_ioctl+0x2e9/0x410
 __x64_sys_ioctl+0x4a/0x70
 do_syscall_64+0xb8/0x160
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x4689b9
Code: fd e0 fa ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb e0 fa ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f368fa4dc98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000000000076bf00 RCX: 00000000004689b9
RDX: 0000000020000240 RSI: 00000000c02064b2 RDI: 0000000000000003
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00000000004d17e0 R14: 00007f368fa4e6d4 R15: 000000000076bf0c

Uninit was created at:
 kmsan_save_stack_with_flags
 kmsan_internal_poison_shadow+0x66/0xd0
 kmsan_slab_free+0x6e/0xb0
 slab_free_freelist_hook
 slab_free
 kfree+0x571/0x30a0
 drm_gem_vram_destroy
 ttm_buffer_object_destroy+0xc8/0x130
 ttm_bo_release
 kref_put
 ttm_bo_put+0x117d/0x23e0
 ttm_bo_init_reserved+0x11c0/0x11d0
 ttm_bo_init+0x289/0x3f0
 drm_gem_vram_init
 drm_gem_vram_create+0x775/0x990
 drm_gem_vram_fill_create_dumb
 drm_gem_vram_driver_dumb_create+0x238/0x590
 drm_mode_create_dumb
 drm_mode_create_dumb_ioctl+0x41d/0x450
 drm_ioctl_kernel+0x5a4/0x710
 drm_ioctl+0xc6f/0x1240
 vfs_ioctl
 ksys_ioctl
 __do_sys_ioctl
 __se_sys_ioctl+0x2e9/0x410
 __x64_sys_ioctl+0x4a/0x70
 do_syscall_64+0xb8/0x160
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

If ttm_bo_init() fails, the "gbo" will be freed by
ttm_buffer_object_destroy() in ttm_bo_init(). But then
drm_gem_vram_create() and drm_gem_vram_init() will free
"gbo" again.

Reported-by: Hulk Robot <hulkci@huawei.com>
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Cc: x kaneiki <xkaneiki@gmail.com>
Signed-off-by: Jia Yang <jiayang5@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200714083238.28479-2-tzimmermann@suse.de


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 23970a1c

 upstream.

The clang build reports this error
fs/udf/inode.c:805:6: error: variable 'newblock' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
        if (*err < 0)
            ^~~~~~~~
newblock is never set before error handling jump.
Initialize newblock to 0 and remove redundant settings.

Fixes: d8b39db5fab8 ("udf: Handle error when adding extent to a file")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20221230175341.1629734-1-trix@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 23e60c8d ]

According the "USB Type-C Port Controller Interface Specification v2.0"
the TCPC sets the fault status register bit-7
(AllRegistersResetToDefault) once the registers have been reset to
their default values.

This triggers an alert(-irq) on PTN5110 devices albeit we do mask the
fault-irq, which may cause a kernel hang. Fix this generically by writing
a one to the corresponding bit-7.

Cc: stable@vger.kernel.org
Fixes: 74e656d6

 ("staging: typec: Type-C Port Controller Interface driver (tcpci)")
Reported-by: "Angus Ainslie (Purism)" <angus@akkea.ca>
Closes: https://lore.kernel.org/all/20190508002749.14816-2-angus@akkea.ca/


Reported-by: Christian Bach <christian.bach@scs.ch>
Closes: https://lore.kernel.org/regressions/ZR0P278MB07737E5F1D48632897D51AC3EB329@ZR0P278MB0773.CHEP278.PROD.OUTLOOK.COM/t/


Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230816172502.1155079-1-festevam@gmail.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2861ed4d ]

The sc16is7xx_config_rs485() function is called only for the second
port (index 1, channel B), causing initialization problems for the
first port.

For the sc16is7xx driver, port->membase and port->mapbase are not set,
and their default values are 0. And we set port->iobase to the device
index. This means that when the first device is registered using the
uart_add_one_port() function, the following values will be in the port
structure:
    port->membase = 0
    port->mapbase = 0
    port->iobase  = 0

Therefore, the function uart_configure_port() in serial_core.c will
exit early because of the following check:
	/*
	 * If there isn't a port here, don't do anything further.
	 */
	if (!port->iobase && !port->mapbase && !port->membase)
		return;

Typically, I2C and SPI drivers do not set port->membase and
port->mapbase.

The max310x driver sets port->membase to ~0 (all ones). By
implementing the same change in this driver, uart_configure_port() is
now correctly executed for all ports.

Fixes: dfeae619

 ("serial: sc16is7xx")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
Link: https://lore.kernel.org/r/20230807214556.540627-2-hugo@hugovil.com


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5da6b1c0

 ]

Some derivates of sc16is7xx devices expose more than one tty device to
userspace. If multiple such devices exist in a system, userspace
currently has no clean way to infer which tty maps to which physical
line.

Set the .iobase value to the relative index within the device to allow
infering the order through sysfs.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20200901120329.4176302-1-daniel@zonque.org


Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 2861ed4d

 ("serial: sc16is7xx: fix broken port 0 uart init")
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit e520d0b6 upstream.

Allocate extra space for terminating element at:

drivers/cpufreq/brcmstb-avs-cpufreq.c:
449         table[i].frequency = CPUFREQ_TABLE_END;

and add code comment to make this clear.

This fixes the following -Warray-bounds warning seen after building
ARM with multi_v7_defconfig (GCC 13):
In function 'brcm_avs_get_freq_table',
    inlined from 'brcm_avs_cpufreq_init' at drivers/cpufreq/brcmstb-avs-cpufreq.c:623:15:
drivers/cpufreq/brcmstb-avs-cpufreq.c:449:28: warning: array subscript 5 is outside array bounds of 'void[60]' [-Warray-bounds=]
  449 |         table[i].frequency = CPUFREQ_TABLE_END;
In file included from include/linux/node.h:18,
                 from include/linux/cpu.h:17,
                 from include/linux/cpufreq.h:12,
                 from drivers/cpufreq/brcmstb-avs-cpufreq.c:44:
In function 'devm_kmalloc_array',
    inlined from 'devm_kcalloc' at include/linux/device.h:328:9,
    inlined from 'brcm_avs_get_freq_table' at drivers/cpufreq/brcmstb-avs-cpufreq.c:437:10,
    inlined from 'brcm_avs_cpufreq_init' at drivers/cpufreq/brcmstb-avs-cpufreq.c:623:15:
include/linux/device.h:323:16: note: at offset 60 into object of size 60 allocated by 'devm_kmalloc'
  323 |         return devm_kmalloc(dev, bytes, flags);
      |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -Warray-bounds.

Link: https://github.com/KSPP/linux/issues/324
Fixes: de322e08

 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d9c83f71 upstream.

We were reading the length of the scatterlist sg after copying value of
tsg inside.
So we are using the size of the previous scatterlist and for the first
one we are using an unitialised value.
Fix this by copying tsg in sg[0] before reading the size.

Fixes : 8a1012d3

 ("crypto: stm32 - Support for STM32 HASH module")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ea5717cb upstream.

OS installers are relying on /sys/firmware/ipl/has_secure to be
present on machines supporting secure boot. This file is present
for all IPL types, but not the unknown type, which prevents a secure
installation when an LPAR is booted in HMC via FTP(s), because
this is an unknown IPL type in linux. While at it, also add the secure
file.

Fixes: c9896acc

 ("s390/ipl: Provide has_secure sysfs attribute")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fe8c3623 upstream.

After commit 30696378 ("pstore/ram: Do not treat empty buffers as
valid"), initialization would assume a prz was valid after seeing that
the buffer_size is zero (regardless of the buffer start position). This
unchecked start value means it could be outside the bounds of the buffer,
leading to future access panics when written to:

 sysdump_panic_event+0x3b4/0x5b8
 atomic_notifier_call_chain+0x54/0x90
 panic+0x1c8/0x42c
 die+0x29c/0x2a8
 die_kernel_fault+0x68/0x78
 __do_kernel_fault+0x1c4/0x1e0
 do_bad_area+0x40/0x100
 do_translation_fault+0x68/0x80
 do_mem_abort+0x68/0xf8
 el1_da+0x1c/0xc0
 __raw_writeb+0x38/0x174
 __memcpy_toio+0x40/0xac
 persistent_ram_update+0x44/0x12c
 persistent_ram_write+0x1a8/0x1b8
 ramoops_pstore_write+0x198/0x1e8
 pstore_console_write+0x94/0xe0
 ...

To avoid this, also check if the prz start is 0 during the initialization
phase. If not, the next prz sanity check case will discover it (start >
size) and zap the buffer back to a sane state.

Fixes: 30696378

 ("pstore/ram: Do not treat empty buffers as valid")
Cc: Yunlong Xing <yunlong.xing@unisoc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Enlin Mu <enlin.mu@unisoc.com>
Link: https://lore.kernel.org/r/20230801060432.1307717-1-yunlong.xing@unisoc.com


[kees: update commit log with backtrace and clarifications]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>