Use the POWER_DOWN_PHY and POWER_UP_PHY sideband message transactions to
set power states for downstream sinks. Apart from giving us the ability
to set power state for individual sinks, this fixes the below test for
me.

$ xrandr --display :0 --output DP-2-2-8 --off
$ xrandr --display :0 --output DP-2-2-1 --off
$ xrandr --display :0 --output DP-2-2-8 --auto #Black screen
$ xrandr --display :0 --output DP-2-2-1 --auto

v2: Modify and document the dpms and port disable order (Ville)
    Add comment explaining is_mst = !crtc_state equivalence(Ville, Maarten)

v3 by Jani: rebase

References: https://bugs.freedesktop.org/show_bug.cgi?id=90963
References: https://bugs.freedesktop.org/show_bug.cgi?id=88124


Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude <lyude@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003142211.860-1-jani.nikula@intel.com

Use a priority stored in the context as the initial value when
submitting a request. This allows us to change the default priority on a
per-context basis, allowing different contexts to be favoured with GPU
time at the expense of lower importance work. The user can adjust the
context's priority via I915_CONTEXT_PARAM_PRIORITY, with more positive
values being higher priority (they will be serviced earlier, after their
dependencies have been resolved). Any prerequisite work for an execbuf
will have its priority raised to match the new request as required.

Normal users can specify any value in the range of -1023 to 0 [default],
i.e. they can reduce the priority of their workloads (and temporarily
boost it back to normal if so desired).

Privileged users can specify any value in the range of -1023 to 1023,
[default is 0], i.e. they can raise their priority above all overs and
so potentially starve the system.

Note that the existing schedulers are not fair, nor load balancing, the
execution is strictly by priority on a first-come, first-served basis,
and the driver may choose to boost some requests above the range
available to users.

This priority was originally based around nice(2), but evolved to allow
clients to adjust their priority within a small range, and allow for a
privileged high priority range.

For example, this can be used to implement EGL_IMG_context_priority
https://www.khronos.org/registry/egl/extensions/IMG/EGL_IMG_context_priority.txt



	EGL_CONTEXT_PRIORITY_LEVEL_IMG determines the priority level of
        the context to be created. This attribute is a hint, as an
        implementation may not support multiple contexts at some
        priority levels and system policy may limit access to high
        priority contexts to appropriate system privilege level. The
        default value for EGL_CONTEXT_PRIORITY_LEVEL_IMG is
        EGL_CONTEXT_PRIORITY_MEDIUM_IMG."

so we can map

	PRIORITY_HIGH -> 1023 [privileged, will failback to 0]
	PRIORITY_MED -> 0 [default]
	PRIORITY_LOW -> -1023

They also map onto the priorities used by VkQueue (and a VkQueue is
essentially a timeline, our i915_gem_context under full-ppgtt).

v2: s/CAP_SYS_ADMIN/CAP_SYS_NICE/
v3: Report min/max user priorities as defines in the uapi, and rebase
internal priorities on the exposed values.

Testcase: igt/gem_exec_schedule
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-9-chris@chris-wilson.co.uk

When we write to ELSP, it triggers a context preemption at the earliest
arbitration point (3DPRIMITIVE, some PIPECONTROLs, a few other
operations and the explicit MI_ARB_CHECK). If this is to the same
context, it triggers a LITE_RESTORE where the RING_TAIL is merely
updated (used currently to chain requests from the same context
together, avoiding bubbles). However, if it is to a different context, a
full context-switch is performed and it will start to execute the new
context saving the image of the old for later execution.

Previously we avoided preemption by only submitting a new context when
the old was idle. But now we wish embrace it, and if the new request has
a higher priority than the currently executing request, we write to the
ELSP regardless, thus triggering preemption, but we tell the GPU to
switch to our special preemption context (not the target). In the
context-switch interrupt handler, we know that the previous contexts
have finished execution and so can unwind all the incomplete requests
and compute the new highest priority request to execute.

It would be feasible to avoid the switch-to-idle intermediate by
programming the ELSP with the target context. The difficulty is in
tracking which request that should be whilst maintaining the dependency
change, the error comes in with coalesced requests. As we only track the
most recent request and its priority, we may run into the issue of being
tricked in preempting a high priority request that was followed by a
low priority request from the same context (e.g. for PI); worse still
that earlier request may be our own dependency and the order then broken
by preemption. By injecting the switch-to-idle and then recomputing the
priority queue, we avoid the issue with tracking in-flight coalesced
requests. Having tried the preempt-to-busy approach, and failed to find
a way around the coalesced priority issue, Michal's original proposal to
inject an idle context (based on handling GuC preemption) succeeds.

The current heuristic for deciding when to preempt are only if the new
request is of higher priority, and has the privileged priority of
greater than 0. Note that the scheduler remains unfair!

v2: Disable for gen8 (bdw/bsw) as we need additional w/a for GPGPU.
Since, the feature is now conditional and not always available when we
have a scheduler, make it known via the HAS_SCHEDULER GETPARAM (now a
capability mask).
v3: Stylistic tweaks.
v4: Appease Joonas with a snippet of kerneldoc, only to fuel to fire of
the preempt vs preempting debate.

Suggested-by: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-8-chris@chris-wilson.co.uk

In the next few patches, we wish to enable different features for the
scheduler, some which may subtlety change ABI (e.g. allow requests to be
reordered under different circumstances). So we need to make sure
userspace is cognizant of the changes (if they care), by which we employ
the usual method of a GETPARAM. We already have an
I915_PARAM_HAS_SCHEDULER (which notes the existing ability to reorder
requests to avoid bubbles), and now we wish to extend that to be a
bitmask to describe the different capabilities implemented.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-7-chris@chris-wilson.co.uk

With preemption, we will want to "unsubmit" a request, taking it back
from the hw and returning it to the priority sorted execution list. In
order to know where to insert it into that list, we need to remember
its adjust priority (which may change even as it was being executed).

This also affects reset for execlists as we are now unsubmitting the
requests following the reset (rather than directly writing the ELSP for
the inflight contexts). This turns reset into an accidental preemption
point, as after the reset we may choose a different pair of contexts to
submit to hw.

GuC is not updated as this series doesn't add preemption to the GuC
submission, and so it can keep benefiting from the early pruning of the
DFS inside execlists_schedule() for a little longer. We also need to
find a way of reducing the cost of that DFS...

v2: Include priority in error-state

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-6-chris@chris-wilson.co.uk

Move the re-enabling of MI arbitration from a per-bb w/a buffer to the
emission of the batch buffer itself.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-5-chris@chris-wilson.co.uk

Add another perma-pinned context for using for preemption at any time.
We cannot just reuse the existing kernel context, as first and foremost
we need to ensure that we can preempt the kernel context itself, so
require a distinct context id. Similar to the kernel context, we may
want to interrupt execution and switch to the preempt context at any
time, and so it needs to be permanently pinned and available.

To compensate for yet another permanent allocation, we shrink the
existing context and the new context by reducing their ringbuffer to the
minimum.

v2: Assert that we never allocate a request from the preemption context.
v3: Limit perma-pin to engines that may preempt.
v4: Onion cleanup for early driver death
v5: Onion ordering in main driver cleanup as well.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-4-chris@chris-wilson.co.uk

Let the listener know that the context we just scheduled out was not
complete, and will be scheduled back in at a later point.

v2: Handle CONTEXT_STATUS_PREEMPTED in gvt by aliasing it to
CONTEXT_STATUS_OUT for the moment, gvt can expand upon the difference
later.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Zhenyu Wang" <zhenyuw@linux.intel.com>
Cc: "Wang, Zhi A" <zhi.a.wang@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-3-chris@chris-wilson.co.uk

Supporting fine-granularity preemption levels may require changes in
userspace batch buffer programming. Therefore, we need to fallback to
safe default values, rather that use hardware defaults. Userspace is
still able to enable fine-granularity, since we're whitelisting the
register controlling it in WaEnablePreemptionGranularityControlByUMD.

v2: Extend w/a to cover Cannonlake
v3: Fix commentary to include both fake w/a names.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-2-chris@chris-wilson.co.uk

The WA applies to all production Gen9 and requires both enabling and
whitelisting of the per-context preemption control register.

v2: Extend to Cannonlake.

Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-1-chris@chris-wilson.co.uk

We don't want to make aggregate uc functions to be too detailed.
This will also make future patch easier.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-7-michal.wajdeczko@intel.com

We want to keep each uC specific code in separate files.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-6-michal.wajdeczko@intel.com

This is a prerequisite to unblock next steps.

v2: correct include order (Joonas)
v3: use common function prefix (Joonas)
    add kerneldoc (Michal)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-5-michal.wajdeczko@intel.com

This patch adds new function intel_uc_init_mmio which will initialize
MMIO access related variables prior to uc load/init.

v2: Removed unnecessary export of guc_send_init_regs. Created
intel_uc_init_mmio that currently wraps guc_init_send_regs. (Michal)

v3 (Michal): add kerneldoc (Joonas)

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-4-michal.wajdeczko@intel.com

We don't need it here.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-3-michal.wajdeczko@intel.com

We're trying to resolve inter-header dependencies.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-2-michal.wajdeczko@intel.com

trace_i915_gem_evict_everything and trace_i915_gem_ring_flush stopped
being used when their parent functions were removed.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003125055.11370-2-chris@chris-wilson.co.uk

The tracepoints need some tlc, in particular we've neglected to update
them for the 64b era.

v2: Prefix hexadecimal output with 0x.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003125055.11370-1-chris@chris-wilson.co.uk


Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

These macros are of dubious merit when coupled with the per-context w/a
set. Instead of tweaking the value in the context, they tweak the value
based on the mmio at the time of recording; they are almost by
definition not per-context! Having removed the last users, remove the
macros to avoid temptation in the future.

v2: Kill WA_WRITE as well (now also unused).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004124153.14142-2-chris@chris-wilson.co.uk


Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

Looking at gem_workarounds shows us that MMCD_MISC_CTRL is not restored
following a suspend-resume cycle. This implies that MMCD_MISC_CTRL is
not stored in the context, but is an ordinary register w/a that we need to
restore during init_hw.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004124153.14142-1-chris@chris-wilson.co.uk


Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

RING_FORCE_TO_NONPRIV registers do not live in the logical context. They are simply
global privileged MMIO registers that happen to be powercontext saved and restored
(meaning only they can survive RC6). Therefore, there is absolutely no need to save
them so that they can be restored everytime we create a new logical context.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506638439-6903-1-git-send-email-oscar.mateo@intel.com


Acked-by: Michel Thierry <michel.thierry@intel.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk> #bxt
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

This has been unused since commit afa8ce5b
("drm/i915: Nuke legacy flip queueing code").

Changes since v1:
- Rebase on top of all the changes to modparams.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
\o/-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004094416.31306-1-maarten.lankhorst@linux.intel.com

According to BSpec GLK like BXT needs to ignore the idle state of cores
before starting the DMC firmware's DC state handler.

Fixes: dbb28b5c ("drm/i915/DMC/GLK: Load DMC on GLK")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003095159.711-2-imre.deak@intel.com

The DMC firmware program memory is lost after S3/S4 system suspend, so
we need to reprogram it during resume.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103070


Fixes: cebfcead ("drm/i915/DMC/CNL: Load DMC on CNL")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003095159.711-1-imre.deak@intel.com

In legacy cursor updates we need the extra vblank waits if we update
watermarks, and then we cannot skip the vblank for cursors.

This is why for < gen9 we disabled the cursor fastpath, but we can skip
the wait when post vblank watermarks are untouched.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919121419.13708-2-maarten.lankhorst@linux.intel.com

Commit b44d5c0c ("drm/i915: Always wait for flip_done, v2.") removed
the call to wait_for_vblanks and replaced it with flip_done.

Unfortunately legacy_cursor_update was unset too late, and the
replacement call drm_atomic_helper_wait_for_flip_done() was
a noop. Make sure that its unset before setup_commit() is
called to fix this issue.

Changes since v1:
- Force vblank wait for watermarks not yet converted to atomic too. (Ville)
- Use for_each_new_intel_crtc_in_state. (Ville)
Changes since v2:
- Move the optimization to a separate commit. (Ville)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: b44d5c0c ("drm/i915: Always wait for flip_done, v2.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102675


Testcase: kms_cursor_crc
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reported-by: Marta Löfstedt <marta.lofstedt@intel.com>
Cc: Marta Löfstedt <marta.lofstedt@intel.com>
Tested-by: Marta Löfstedt <marta.lofstedt@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919121419.13708-1-maarten.lankhorst@linux.intel.com

Let's organize this in a way that it gets more obvious
when looking to the platform colors and in a easier
way to get inherited.

v2: Add comma at the end (Jani), when possible.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003063652.17248-3-rodrigo.vivi@intel.com

As Chris noticed the current organization is confusing
and inheritance is not clear.

So, let's split it in GEN<n>_FEATURES <cdn>_PLATFORM
where new GEN inherit features from previous gens and
Platforms only use gen features plus what ever is specific
for that platform and shouldn't be passed on.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003063652.17248-2-rodrigo.vivi@intel.com

According to Spec for SKL+: "Isochronous Priority Control.
If enabled, Display sends demoted requests once the transition
watermark is reached. If transition watermark is not enabled,
Display sends demoted requests when the display buffer is full."

The commit 'e57f1c02 ("drm/i915/gen9+: Add has_ipc flag in
device info structure")' introduced that as gen9+ but missing many
SKL Skus.

I believe the reason for that is Spec also mentions workarounds for
SKL-ALL: "IPC (Isoch Priority Control) may cause underflows
WA: Do not enable IPC in register ARB_CTL2"

It seems lame to add the feature and forever disable it,
but it will avoid a mistake of enabling it when we are reorganizing
the feature definitions on i915_pci.c later.

It will also allow us to probably extend that workaround for
other platforms.

Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003063652.17248-1-rodrigo.vivi@intel.com

The common lane power down flag of a DPIO PHY has a funky semantic:
after the initial enabling of the PHY (so from a disabled state) this
flag will be clear. It will be set only after the PHY will be used for
the first time (for instance due to enabling the corresponding pipe) and
then become unused (due to disabling the pipe). During the initial PHY
enablement we don't know which of the above phases we are in, so move
the check for the flag where this is known, the HW readout code. This is
where the rest of lane power down status checks are done anyway.

This fixes at least a problem on GLK where after module reloading, the
common lane power down flag of PHY1 is set, but the PHY is actually
powered-on and properly set up. The GRC readout code for other PHYs will
hence think that PHY1 is not powered initially and disable it after the
GRC readout. This will cause the AUX power well related to PHY1 to get
disabled in a stuck state, timing out when we try to enable it later.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Fixes: e93da0a0 ("drm/i915/bxt: Sanitiy check the PHY lane power down status")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102777


Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171002135307.26117-1-imre.deak@intel.com

On GLK and CNL enabling a pipe with its pipe scaler enabled will result
in a FIFO underrun. This happens only once after driver loading or
system/runtime resume, more specifically after power well 1 gets
enabled; subsequent modesets seem to be free of underruns. The BSpec
workaround for this is to disable the pipe scaler clock gating for the
duration of modeset. Based on my tests disabling clock gating must be
done before enabling pipe scaling and we can re-enable it after the pipe
is enabled and one vblank has passed.

For consistency I also checked if plane scaling would cause the same
problem, but that doesn't seem to trigger this problem.

The patch is based on an earlier version from Ander.

v2 (Rodrigo):
- Set also CLKGATE_DIS_PSL bits 8 and 9.
- Add also the BSpec workaround ID.

Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100302


Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171002075557.32615-1-imre.deak@intel.com

While testing Jim Bride's latest batch of PSR patches I noticed
that gen9lp doesn't include the has_psr flag, and that our GLK
system thus reported PSR as unsupported.

This patch simply adds has_psr.

Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170808100952.26448-1-david.weinehall@linux.intel.com

Only init / reset the display interrupts during power well enabling /
disabling if the i915 interrupts are enabled. So far we did the
init / reset during driver loading / resuming too, where
initialization / enabling of the i915 interrupts happens only at a later
point. This didn't cause a problem due to GEN8_MASTER_IRQ_CONTROL being
cleared, but triggered gen3_assert_iir_is_zero() in GEN8_IRQ_INIT_NDX().

References: https://bugs.freedesktop.org/show_bug.cgi?id=102988


Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170928100624.15533-1-imre.deak@intel.com

Atm, on GEN9 big core platforms before saving the hibernation image we
uninitialize the display, disabling power wells manually, while before
restoring the image we keep things powered (letting HW/DMC power down
things as needed). The state mismatch will trigger the following error:

DC state mismatch (0x0 -> 0x2)

While the restore handler knows how to initialize the display from an
unknown state (due to a different loader kernel or not having i915
loaded in the loader kernel) we should still use the same state for
consistency before image saving and restoring. Do this by uniniting the
display before restoring the image too.

Bugzilla: https://bugs.freedesktop.org/attachment.cgi?id=133376


Reported-and-tested-by: Wang Wendy <wendy.wang@intel.com>
Reported-and-tested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Wang Wendy <wendy.wang@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816144607.9935-1-imre.deak@intel.com

Avoid the repeated rbtree lookup for each request as we unwind them by
tracking the last priolist.

v2: Fix up my unhelpful suggestion of using default_priolist.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170928193910.17988-4-chris@chris-wilson.co.uk

We use INT_MIN to denote the priority of a request that has not been
submitted to the scheduler; we treat INT_MIN as an invalid priority and
initialise the request to it. Give the value a name so it stands out.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170928193910.17988-3-chris@chris-wilson.co.uk


Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

In the future, we will want to unwind requests following a preemption
point. This requires the same steps as for unwinding upon a reset, so
extract the existing code to a separate function for later use.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170928193910.17988-2-chris@chris-wilson.co.uk

i915_gem_restore_fences is GEM resumption task hence it is moved to
i915_gem_resume from i915_restore_state.

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506661116-12106-1-git-send-email-sagar.a.kamble@intel.com


Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Currently, we are being fairly lazy and only using a wmb() following an
update to an active batch. Previously, we have found that to be
insufficient to ensure that a write from the CPU reaches memory in a
timely fashion, and in some caches we may need to flush a chipset cache.
To that end, we have i915_gem_chipset_flush() so use it.

Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170926153409.7928-1-chris@chris-wilson.co.uk


Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Signed-off-by: Jani Nikula <jani.nikula@intel.com>