If scsi cmd sglist is not suitable for DDP then csiostor driver uses
preallocated buffers for DDP, because of this data copy is required from
DDP buffer to scsi cmd sglist before calling ->scsi_done().

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Abort thread wakeups, on some wqe types, are not happening.  The thread
wakeup logic is dependent upon the LPFC_DRIVER_ABORTED flag. However, on
these wqes, the completion handler running prior to the io completion
routine ends up clearing the flag.

Rework the wakeup logic to look at a non-null waitq element which must be
set if the abort thread is waiting. This is reverting the change in the
indicated patch.

Fixes: c2017260

 ("scsi: lpfc: Rework locking on SCSI io completion")
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Reduce the default VMbus channel ring buffer size for storvsc SCSI devices
from 1 Mbyte to 128 Kbytes. Measurements show that ring buffer sizes above
128 Kbytes do not increase performance even at very high IOPS rates, so
don't waste the memory. Also remove the dependence on PAGE_SIZE, since the
ring buffer size should not change on architectures where PAGE_SIZE is not
4 Kbytes.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

When the number of sub-channels offered by Hyper-V is >= the number of CPUs
in the VM, calculate the correct number of sub-channels.  The current code
produces one too many.

This scenario arises only when the number of CPUs is artificially
restricted (for example, with maxcpus=<n> on the kernel boot line), because
Hyper-V normally offers a sub-channel count < number of CPUs.  While the
current code doesn't break, the extra sub-channel is unbalanced across the
CPUs (for example, a total of 5 channels on a VM with 4 CPUs).

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Blacklist "Universal Xport" LUN. It's used for in-band storage array
management.  Also add model to the rdac dh family.

Cc: Martin Wilck <mwilck@suse.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com>
Cc: Christophe Varoqui <christophe.varoqui@opensvc.com>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: SCSI ML <linux-scsi@vger.kernel.org>
Cc: DM ML <dm-devel@redhat.com>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The nvm_image is a large struct qedi_nvm_iscsi_image object of over 24K so
don't declare it on the stack just for a sizeof requirement; use sizeof on
struct qedi_nvm_iscsi_image instead.

Fixes: c77a2fa3

 ("scsi: qedi: Add the CRC size within iSCSI NVM image")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

No change to functionality. Simply make transport event messages a little
clearer, and rework CRQ format enums such that we have separate enums for
INIT messages and XPORT events.

[mkp: typo]

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Status and error codes are returned in big endian from the VIOS. The values
are translated into a human readable format when logged, but the values are
also logged. This patch byte swaps those values so that they are consistent
between BE and LE platforms.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The VIOS uses the SCSI_ERROR class to report PRLI failures. These errors
are indicated with the combination of a IBMVFC_FC_SCSI_ERROR return status
and 0x8000 error code. Add these codes to cmd_status[] with appropriate
human readable error message.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The text of messages logged with ibmvfc_log_error() always contain the term
"failed". In the case of cancelled commands during EH they are reported
back by the VIOS using error codes. This can be confusing to somebody
looking at these log messages as to whether a command was successfully
cancelled. The following real log message for example it is unclear if the
transaction was actaully cancelled.

<6>sd 0:0:1:1: Cancelling outstanding commands.
<3>sd 0:0:1:1: [sde] Command (28) failed: transaction cancelled (2:6) flags: 0 fcp_rsp: 0, resid=0, scsi_status: 0

Remove prefixing of "failed" to all error logged messages. The
ibmvfc_log_error() function translates the returned error/status codes to a
human readable message already.

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

If an incoming ELS of type RSCN contains more than one element, zfcp
suboptimally causes repeated erp trigger NOP trace records for each
previously failed port. These could be ports that went away.  It loops over
each RSCN element, and for each of those in an inner loop over all
zfcp_ports.

The trigger to recover failed ports should be just the reception of some
RSCN, no matter how many elements it has. So we can loop over failed ports
separately, and only then loop over each RSCN element to handle the
non-failed ports.

The call chain was:

  zfcp_fc_incoming_rscn
    for (i = 1; i < no_entries; i++)
      _zfcp_fc_incoming_rscn
        list_for_each_entry(port, &adapter->port_list, list)
          if (masked port->d_id match) zfcp_fc_test_link
          if (!port->d_id) zfcp_erp_port_reopen "fcrscn1"   <===

In order the reduce the "flooding" of the REC trace area in such cases, we
factor out handling the failed ports to be outside of the entries loop:

  zfcp_fc_incoming_rscn
    if (no_entries > 1)                                     <===
      list_for_each_entry(port, &adapter->port_list, list)  <===
        if (!port->d_id) zfcp_erp_port_reopen "fcrscn1"     <===
    for (i = 1; i < no_entries; i++)
      _zfcp_fc_incoming_rscn
        list_for_each_entry(port, &adapter->port_list, list)
          if (masked port->d_id match) zfcp_fc_test_link

Abbreviated example trace records before this code change:

Tag            : fcrscn1
WWPN           : 0x500507630310d327
ERP want       : 0x02
ERP need       : 0x02

Tag            : fcrscn1
WWPN           : 0x500507630310d327
ERP want       : 0x02
ERP need       : 0x00                 NOP => superfluous trace record

The last trace entry repeats if there are more than 2 RSCN elements.

Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Suppose more than one non-NPIV FCP device is active on the same channel.
Send I/O to storage and have some of the pending I/O run into a SCSI
command timeout, e.g. due to bit errors on the fibre. Now the error
situation stops. However, we saw FCP requests continue to timeout in the
channel. The abort will be successful, but the subsequent TUR fails.
Scsi_eh starts. The LUN reset fails. The target reset fails.  The host
reset only did an FCP device recovery. However, for non-NPIV FCP devices,
this does not close and reopen ports on the SAN-side if other non-NPIV FCP
device(s) share the same open ports.

In order to resolve the continuing FCP request timeouts, we need to
explicitly close and reopen ports on the SAN-side.

This was missing since the beginning of zfcp in v2.6.0 history commit
ea127f975424 ("[PATCH] s390 (7/7): zfcp host adapter.").

Note: The FSF requests for forced port reopen could run into FSF request
timeouts due to other reasons. This would trigger an internal FCP device
recovery. Pending forced port reopen recoveries would get dismissed. So
some ports might not get fully reopened during this host reset handler.
However, subsequent I/O would trigger the above described escalation and
eventually all ports would be forced reopen to resolve any continuing FCP
request timeouts due to earlier bit errors.

Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org> #3.0+
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

An already deleted SCSI device can exist on the Scsi_Host and remain there
because something still holds a reference.  A new SCSI device with the same
H:C:T:L and FCP device, target port WWPN, and FCP LUN can be created.  When
we try to unblock an rport, we still find the deleted SCSI device and
return early because the zfcp_scsi_dev of that SCSI device is not
ZFCP_STATUS_COMMON_UNBLOCKED. Hence we miss to unblock the rport, even if
the new proper SCSI device would be in good state.

Therefore, skip deleted SCSI devices when iterating the sdevs of the shost.
[cf. __scsi_device_lookup{_by_target}() or scsi_device_get()]

The following abbreviated trace sequence can indicate such problem:

Area           : REC
Tag            : ersfs_3
LUN            : 0x4045400300000000
WWPN           : 0x50050763031bd327
LUN status     : 0x40000000     not ZFCP_STATUS_COMMON_UNBLOCKED
Ready count    : n		not incremented yet
Running count  : 0x00000000
ERP want       : 0x01
ERP need       : 0xc1		ZFCP_ERP_ACTION_NONE

Area           : REC
Tag            : ersfs_3
LUN            : 0x4045400300000000
WWPN           : 0x50050763031bd327
LUN status     : 0x41000000
Ready count    : n+1
Running count  : 0x00000000
ERP want       : 0x01
ERP need       : 0x01

...

Area           : REC
Level          : 4		only with increased trace level
Tag            : ertru_l
LUN            : 0x4045400300000000
WWPN           : 0x50050763031bd327
LUN status     : 0x40000000
Request ID     : 0x0000000000000000
ERP status     : 0x01800000
ERP step       : 0x1000
ERP action     : 0x01
ERP count      : 0x00

NOT followed by a trace record with tag "scpaddy"
for WWPN 0x50050763031bd327.

Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Fixes: 6f2ce1c6

 ("scsi: zfcp: fix rport unblock race with LUN recovery")
Cc: <stable@vger.kernel.org> #2.6.32+
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Commit a83da8a4 ("scsi: sd: Optimal I/O size should be a multiple
of physical block size") split one conditional into several separate
statements in an effort to provide more accurate warning messages when
a device reports a nonsensical value. However, this reorganization
accidentally dropped the precondition of the reported value being
larger than zero. This lead to a warning getting emitted on devices
that do not report an optimal I/O size at all.

Remain silent if a device does not report an optimal I/O size.

Fixes: a83da8a4

 ("scsi: sd: Optimal I/O size should be a multiple of physical block size")
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org>
Reported-by: Hussam Al-Tayeb <ht990332@gmx.com>
Tested-by: Hussam Al-Tayeb <ht990332@gmx.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The scsi_end_request() function calls scsi_cmd_to_driver() indirectly and
hence needs the disk->private_data pointer. Avoid that that pointer is
cleared before all affected I/O requests have finished. This patch avoids
that the following crash occurs:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
 scsi_mq_uninit_cmd+0x1c/0x30
 scsi_end_request+0x7c/0x1b8
 scsi_io_completion+0x464/0x668
 scsi_finish_command+0xbc/0x160
 scsi_eh_flush_done_q+0x10c/0x170
 sas_scsi_recover_host+0x84c/0xa98 [libsas]
 scsi_error_handler+0x140/0x5b0
 kthread+0x100/0x12c
 ret_from_fork+0x10/0x18

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Use dd to test a SCSI device:

  1. echo "blocked" >/sys/block/sda/device/state
  2. dd if=/dev/sda of=/mnt/t.log bs=1M count=10
  3. echo "running" >/sys/block/sda/device/state

dd should finish this work after step 3, but it hangs.

After step2, the call chain is this:

blk_mq_dispatch_rq_list-->scsi_queue_rq-->prep_to_mq

prep_to_mq will return BLK_STS_RESOURCE, and scsi_queue_rq will
transition it to BLK_STS_DEV_RESOURCE which means that driver can
guarantee that IO dispatch will be triggered in future when the
resource is available.  Need to follow the rule if we set the device
state to running.

[mkp: tweaked commit description and code comment as suggested by Bart]

Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

In case iscsi_lookup_endpoint fails, the fix returns -EINVAL to avoid NULL
pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

There are a few windows during AER/EEH when we can access PCIe I/O mapped
registers. This will harden the access to insure we do not allow PCIe
access during errors

Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Sagar Biradar <sagar.biradar@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

During expander reset handling, the driver invokes kernel function
scsi_host_find_tag() to obtain outstanding requests associated with the
scsi host managed by the driver. Driver loops from tag value zero to hba
queue depth to obtain the outstanding scmds. But when blk-mq is enabled,
the block layer may return stale entry for one or more requests. This may
lead to kernel panic if the returned value is inaccessible or the memory
pointed by the returned value is reused.

Reference of upstream discussion:

	https://patchwork.kernel.org/patch/10734933/

Instead of calling scsi_host_find_tag() API for each and every smid (smid
is tag +1) from one to shost->can_queue, now driver will call this API (to
obtain the outstanding scmd) only for those smid's which are outstanding at
the driver level.

Driver will determine whether this smid is outstanding at driver level by
looking into it's corresponding MPI request frame, if its MPI request frame
is empty, then it means that this smid is free and does not need to call
scsi_host_find_tag() for it.  By doing this, driver will invoke
scsi_host_find_tag() for only those tags which are outstanding at the
driver level.

Driver will check whether particular MPI request frame is empty or not by
looking into the "DevHandle" field. If this field is zero then it means
that this MPI request is empty. For active MPI request DevHandle must be
non-zero.

Also driver will memset the MPI request frame once the corresponding scmd
is processed (i.e. just before calling
scmd->done function).

Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The event pool used for queueing commands is destroyed fairly early in the
ibmvscsi_remove() code path. Since, this happens prior to the call so
scsi_remove_host() it is possible for further calls to queuecommand to be
processed which manifest as a panic due to a NULL pointer dereference as
seen here:

PANIC: "Unable to handle kernel paging request for data at address
0x00000000"

Context process backtrace:

DSISR: 0000000042000000 ????Syscall Result: 0000000000000000
4 [c000000002cb3820] memcpy_power7 at c000000000064204
[Link Register] [c000000002cb3820] ibmvscsi_send_srp_event at d000000003ed14a4
5 [c000000002cb3920] ibmvscsi_send_srp_event at d000000003ed14a4 [ibmvscsi] ?(unreliable)
6 [c000000002cb39c0] ibmvscsi_queuecommand at d000000003ed2388 [ibmvscsi]
7 [c000000002cb3a70] scsi_dispatch_cmd at d00000000395c2d8 [scsi_mod]
8 [c000000002cb3af0] scsi_request_fn at d00000000395ef88 [scsi_mod]
9 [c000000002cb3be0] __blk_run_queue at c000000000429860
10 [c000000002cb3c10] blk_delay_work at c00000000042a0ec
11 [c000000002cb3c40] process_one_work at c0000000000dac30
12 [c000000002cb3cd0] worker_thread at c0000000000db110
13 [c000000002cb3d80] kthread at c0000000000e3378
14 [c000000002cb3e30] ret_from_kernel_thread at c00000000000982c

The kernel buffer log is overfilled with this log:

[11261.952732] ibmvscsi: found no event struct in pool!

This patch reorders the operations during host teardown. Start by calling
the SRP transport and Scsi_Host remove functions to flush any outstanding
work and set the host offline. LLDD teardown follows including destruction
of the event pool, freeing the Command Response Queue (CRQ), and unmapping
any persistent buffers. The event pool destruction is protected by the
scsi_host lock, and the pool is purged prior of any requests for which we
never received a response. Finally, move the removal of the scsi host from
our global list to the end so that the host is easily locatable for
debugging purposes during teardown.

Cc: <stable@vger.kernel.org> # v2.6.12+
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

For each ibmvscsi host created during a probe or destroyed during a remove
we either add or remove that host to/from the global ibmvscsi_head
list. This runs the risk of concurrent modification.

This patch adds a simple spinlock around the list modification calls to
prevent concurrent updates as is done similarly in the ibmvfc driver and
ipr driver.

Fixes: 32d6e4b6

 ("scsi: ibmvscsi: add vscsi hosts to global list_head")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

We found out that for v2 hw, a SATA disk can not be written to after the
system comes up.

In commit ffb1c820 ("scsi: hisi_sas: remove the check of sas_dev status
in hisi_sas_I_T_nexus_reset()"), we introduced a path where we may issue an
internal abort for a SATA device, but without following it with a
softreset.

We need to always follow an internal abort with a software reset, as per HW
programming flow, so add this.

Fixes: ffb1c820

 ("scsi: hisi_sas: remove the check of sas_dev status in hisi_sas_I_T_nexus_reset()")
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This patch fixes crash due to NULL pointer derefrence because CPU pointer
is not set and used by driver.  Instead, driver is passes CPU as tag via
ha->isp_ops->{lun_reset|target_reset}

[   30.160780] qla2xxx [0000:a0:00.1]-8038:9: Cable is unplugged...
[   69.984045] qla2xxx [0000:a0:00.0]-8009:8: DEVICE RESET ISSUED nexus=8:0:0 cmd=00000000b0d62f46.
[   69.992849] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040
[   70.000680] PGD 0 P4D 0
[   70.003232] Oops: 0000 [#1] SMP PTI
[   70.006727] CPU: 2 PID: 6714 Comm: sg_reset Kdump: loaded Not tainted 4.18.0-67.el8.x86_64 #1
[   70.015258] Hardware name: NEC Express5800/T110j [N8100-2758Y]/MX32-PH0-NJ, BIOS F11 02/13/2019
[   70.024016] RIP: 0010:blk_mq_rq_cpu+0x9/0x10
[   70.028315] Code: 01 58 01 00 00 48 83 c0 28 48 3d 80 02 00 00 75 ab c3 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48
 8b 47 08 <8b> 40 40 c3 0f 1f 00 0f 1f 44 00 00 48 83 ec 10 48 c7 c6 20 6e 7c
[   70.047087] RSP: 0018:ffff99a481487d58 EFLAGS: 00010246
[   70.052322] RAX: 0000000000000000 RBX: ffffffffc041b08b RCX: 0000000000000000
[   70.059466] RDX: 0000000000000000 RSI: ffff8d10b6b16898 RDI: ffff8d10b341e400
[   70.066615] RBP: ffffffffc03a6bd0 R08: 0000000000000415 R09: 0000000000aaaaaa
[   70.073765] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8d10b341e528
[   70.080914] R13: ffff8d10aadefc00 R14: ffff8d0f64efa998 R15: ffff8d0f64efa000
[   70.088083] FS:  00007f90a201e540(0000) GS:ffff8d10b6b00000(0000) knlGS:0000000000000000
[   70.096188] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   70.101959] CR2: 0000000000000040 CR3: 0000000268886005 CR4: 00000000003606e0
[   70.109127] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   70.116277] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   70.123425] Call Trace:
[   70.125896]  __qla2xxx_eh_generic_reset+0xb1/0x220 [qla2xxx]
[   70.131572]  scsi_ioctl_reset+0x1f5/0x2a0
[   70.135600]  scsi_ioctl+0x18e/0x397
[   70.139099]  ? sd_ioctl+0x7c/0x100 [sd_mod]
[   70.143287]  blkdev_ioctl+0x32b/0x9f0
[   70.146954]  ? __check_object_size+0xa3/0x181
[   70.151323]  block_ioctl+0x39/0x40
[   70.154735]  do_vfs_ioctl+0xa4/0x630
[   70.158322]  ? syscall_trace_enter+0x1d3/0x2c0
[   70.162769]  ksys_ioctl+0x60/0x90
[   70.166104]  __x64_sys_ioctl+0x16/0x20
[   70.169859]  do_syscall_64+0x5b/0x1b0
[   70.173532]  entry_SYSCALL_64_after_hwframe+0x65/0xca
[   70.178587] RIP: 0033:0x7f90a1b3445b
[   70.182183] Code: 0f 1e fa 48 8b 05 2d aa 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00
 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fd a9 2c 00 f7 d8 64 89 01 48
[   70.200956] RSP: 002b:00007fffdca88b68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[   70.208535] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f90a1b3445b
[   70.215684] RDX: 00007fffdca88b84 RSI: 0000000000002284 RDI: 0000000000000003
[   70.222833] RBP: 00007fffdca88ca8 R08: 00007fffdca88b84 R09: 0000000000000000
[   70.229981] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fffdca88b84
[   70.237131] R13: 0000000000000000 R14: 000055ab09b0bd28 R15: 0000000000000000
[   70.244284] Modules linked in: nft_chain_route_ipv4 xt_CHECKSUM nft_chain_nat_ipv4 ipt_MASQUERADE nf_nat_ipv4 nf_nat nf_conntrack_ipv4
 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c ipt_REJECT nf_reject_ipv4 nft_counter nft_compat tun bridge stp llc nf_tables nfnetli
nk devlink sunrpc vfat fat intel_rapl intel_pmc_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm wmi_bmof iTCO_wdt iTCO_
vendor_support irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ipmi_ssif intel_cstate intel_uncore intel_rapl_perf ipmi_si jo
ydev pcspkr ipmi_devintf sg wmi ipmi_msghandler video acpi_power_meter acpi_pad mei_me i2c_i801 mei ip_tables ext4 mbcache jbd2 sr_mod cd
rom sd_mod qla2xxx ast i2c_algo_bit drm_kms_helper nvme_fc syscopyarea sysfillrect uas sysimgblt fb_sys_fops nvme_fabrics ttm
[   70.314805]  usb_storage nvme_core crc32c_intel scsi_transport_fc ahci drm libahci tg3 libata megaraid_sas pinctrl_cannonlake pinctrl_
intel
[   70.327335] CR2: 0000000000000040

Fixes: 9cf2bab6

 ("block: kill request ->cpu member")
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Commit 7f147f9b ("scsi: qla2xxx: Fix N2N target discovery with Local
loop") fixed N2N target discovery for local loop.  However, same code is
used for FC-AL discovery as well. Added check to make sure we are bypassing
area and domain check only in N2N topology for target discovery.

Fixes: 7f147f9b

 ("scsi: qla2xxx: Fix N2N target discovery with Local loop")
Cc: stable@vger.kernel.org # 5.0+
Signed-off-by: Quinn Tran <qtran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Since scsi_device_quiesce() skips SCSI devices that have another state than
RUNNING, OFFLINE or TRANSPORT_OFFLINE, scsi_device_resume() should not
complain about SCSI devices that have been skipped. Hence this patch.  This
patch avoids that the following warning appears during resume:

WARNING: CPU: 3 PID: 1039 at blk_clear_pm_only+0x2a/0x30
CPU: 3 PID: 1039 Comm: kworker/u8:49 Not tainted 5.0.0+ #1
Hardware name: LENOVO 4180F42/4180F42, BIOS 83ET75WW (1.45 ) 05/10/2013
Workqueue: events_unbound async_run_entry_fn
RIP: 0010:blk_clear_pm_only+0x2a/0x30
Call Trace:
 ? scsi_device_resume+0x28/0x50
 ? scsi_dev_type_resume+0x2b/0x80
 ? async_run_entry_fn+0x2c/0xd0
 ? process_one_work+0x1f0/0x3f0
 ? worker_thread+0x28/0x3c0
 ? process_one_work+0x3f0/0x3f0
 ? kthread+0x10c/0x130
 ? __kthread_create_on_node+0x150/0x150
 ? ret_from_fork+0x1f/0x30

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Martin Steigerwald <martin@lichtvoll.de>
Cc: <stable@vger.kernel.org>
Reported-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Tested-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Fixes: 3a0a5299

 ("block, scsi: Make SCSI quiesce and resume work reliably") # v4.15
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

cmd->rcu is initialized by scsi_initialize_rq(). For passthrough
requests, blk_get_request() calls scsi_initialize_rq(). For filesystem
requests, scsi_init_command() calls scsi_initialize_rq(). Make sure
that destroy_rcu_head() is called for passthrough requests.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

In some cases, the iscsi_remove_session() function is called while an
unbind_work operation is still running.  This may cause a situation where
sysfs objects are removed in an incorrect order, triggering a kernel
warning.

[  605.249442] ------------[ cut here ]------------
[  605.259180] sysfs group 'power' not found for kobject 'target2:0:0'
[  605.321371] WARNING: CPU: 1 PID: 26794 at fs/sysfs/group.c:235 sysfs_remove_group+0x76/0x80
[  605.341266] Modules linked in: dm_service_time target_core_user target_core_pscsi target_core_file target_core_iblock iscsi_target_mod target_core_mod nls_utf8 isofs ppdev bochs_drm nfit ttm libnvdimm drm_kms_helper syscopyarea sysfillrect sysimgblt joydev pcspkr fb_sys_fops drm i2c_piix4 sg parport_pc parport xfs libcrc32c dm_multipath sr_mod sd_mod cdrom ata_generic 8021q garp mrp ata_piix stp crct10dif_pclmul crc32_pclmul llc libata crc32c_intel virtio_net net_failover ghash_clmulni_intel serio_raw failover sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi
[  605.627479] CPU: 1 PID: 26794 Comm: kworker/u32:2 Not tainted 4.18.0-60.el8.x86_64 #1
[  605.721401] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014
[  605.823651] Workqueue: scsi_wq_2 __iscsi_unbind_session [scsi_transport_iscsi]
[  605.830940] RIP: 0010:sysfs_remove_group+0x76/0x80
[  605.922907] Code: 48 89 df 5b 5d 41 5c e9 38 c4 ff ff 48 89 df e8 e0 bf ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 38 73 cb a7 e8 24 77 d7 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 00 0f 1f 44 00 00 41 56 41 55 41 54 55
[  606.122304] RSP: 0018:ffffbadcc8d1bda8 EFLAGS: 00010286
[  606.218492] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  606.326381] RDX: ffff98bdfe85eb40 RSI: ffff98bdfe856818 RDI: ffff98bdfe856818
[  606.514498] RBP: ffffffffa7ab73e0 R08: 0000000000000268 R09: 0000000000000007
[  606.529469] R10: 0000000000000000 R11: ffffffffa860d9ad R12: ffff98bdf978e838
[  606.630535] R13: ffff98bdc2cd4010 R14: ffff98bdc2cd3ff0 R15: ffff98bdc2cd4000
[  606.824707] FS:  0000000000000000(0000) GS:ffff98bdfe840000(0000) knlGS:0000000000000000
[  607.018333] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  607.117844] CR2: 00007f84b78ac024 CR3: 000000002c00a003 CR4: 00000000003606e0
[  607.117844] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  607.420926] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  607.524236] Call Trace:
[  607.530591]  device_del+0x56/0x350
[  607.624393]  ? ata_tlink_match+0x30/0x30 [libata]
[  607.727805]  ? attribute_container_device_trigger+0xb4/0xf0
[  607.829911]  scsi_target_reap_ref_release+0x39/0x50
[  607.928572]  scsi_remove_target+0x1a2/0x1d0
[  608.017350]  __iscsi_unbind_session+0xb3/0x160 [scsi_transport_iscsi]
[  608.117435]  process_one_work+0x1a7/0x360
[  608.132917]  worker_thread+0x30/0x390
[  608.222900]  ? pwq_unbound_release_workfn+0xd0/0xd0
[  608.323989]  kthread+0x112/0x130
[  608.418318]  ? kthread_bind+0x30/0x30
[  608.513821]  ret_from_fork+0x35/0x40
[  608.613909] ---[ end trace 0b98c310c8a6138c ]---

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull more Kbuild updates from Masahiro Yamada:

 - add more Build-Depends to Debian source package

 - prefix header search paths with $(srctree)/

 - make modpost show verbose section mismatch warnings

 - avoid hard-coded CROSS_COMPILE for h8300

 - fix regression for Debian make-kpkg command

 - add semantic patch to detect missing put_device()

 - fix some warnings of 'make deb-pkg'

 - optimize NOSTDINC_FLAGS evaluation

 - add warnings about redundant generic-y

 - clean up Makefiles and scripts

* tag 'kbuild-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: remove stale lxdialog/.gitignore
  kbuild: force all architectures except um to include mandatory-y
  kbuild: warn redundant generic-y
  Revert "modsign: Abort modules_install when signing fails"
  kbuild: Make NOSTDINC_FLAGS a simply expanded variable
  kbuild: deb-pkg: avoid implicit effects
  coccinelle: semantic code search for missing put_device()
  kbuild: pkg: grep include/config/auto.conf instead of $KCONFIG_CONFIG
  kbuild: deb-pkg: introduce is_enabled and if_enabled_echo to builddeb
  kbuild: deb-pkg: add CONFIG_ prefix to kernel config options
  kbuild: add workaround for Debian make-kpkg
  kbuild: source include/config/auto.conf instead of ${KCONFIG_CONFIG}
  unicore32: simplify linker script generation for decompressor
  h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux-
  kbuild: move archive command to scripts/Makefile.lib
  modpost: always show verbose warning for section mismatch
  ia64: prefix header search path with $(srctree)/
  libfdt: prefix header search paths with $(srctree)/
  deb-pkg: generate correct build dependencies

Pull x86 asm updates from Thomas Gleixner:
 "Two cleanup patches removing dead conditionals and unused code"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm: Remove unused __constant_c_x_memset() macro and inlines
  x86/asm: Remove dead __GNUC__ conditionals

Pull perf fixes from Thomas Gleixner:
 "Three fixes for the fallout from the TSX errata workaround:

   - Prevent memory corruption caused by a unchecked out of bound array
     index.

   - Two trivial fixes to address compiler warnings"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Make dev_attr_allow_tsx_force_abort static
  perf/x86: Fixup typo in stub functions
  perf/x86/intel: Fix memory corruption

Pull xen fix from Juergen Gross:
 "A fix for a Xen bug introduced by David's series for excluding
  ballooned pages in vmcores"

* tag 'for-linus-5.1b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/balloon: Fix mapping PG_offline pages to user space

Pull 9p updates from Dominique Martinet:
 "Here is a 9p update for 5.1; there honestly hasn't been much.

  Two fixes (leak on invalid mount argument and possible deadlock on
  i_size update on 32bit smp) and a fall-through warning cleanup"

* tag '9p-for-5.1' of git://github.com/martinetd/linux:
  9p/net: fix memory leak in p9_client_create
  9p: use inode->i_lock to protect i_size_write() under 32-bit
  9p: mark expected switch fall-through

Fixes: 400816f6

 ("perf/x86/intel: Implement support for TSX Force Abort")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: kbuild-all@01.org
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190313184243.GA10820@lkp-sb-ep06

When this .gitignore was added, lxdialog was an independent hostprogs-y.

Now that all objects in lxdialog/ are directly linked to mconf, the
lxdialog is no longer generated.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes
the common Kbuild.asm file. Factor out the duplicated include directives
to scripts/Makefile.asm-generic so that no architecture would opt out
of the mandatory-y mechanism.

um is not forced to include mandatory-y since it is a very exceptional
case which does not support UAPI.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The generic-y is redundant under the following condition:

 - arch has its own implementation

 - the same header is added to generated-y

 - the same header is added to mandatory-y

If a redundant generic-y is found, the warning like follows is displayed:

  scripts/Makefile.asm-generic:20: redundant generic-y found in arch/arm/include/asm/Kbuild: timex.h

I fixed up arch Kbuild files found by this.

Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This reverts commit caf6fe91.

The commit was fine but is no longer needed as of commit 3a2429e1


("kbuild: change if_changed_rule for multi-line recipe").  Let's go
back to using ";" to be consistent.

For some discussion, see:

https://lkml.kernel.org/r/CAK7LNASde0Q9S5GKeQiWhArfER4S4wL1=R_FW8q0++_X3T5=hQ@mail.gmail.com

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

During a simple no-op (nothing changed) build I saw 39 invocations of
the C compiler with the argument "-print-file-name=include".  We don't
need to call the C compiler 39 times for this--one time will suffice.

Let's change NOSTDINC_FLAGS to a simply expanded variable to avoid
this since there doesn't appear to be any reason it should be
recursively expanded.

On my build this shaved ~400 ms off my "no-op" build.

Note that the recursive expansion seems to date back to the (really
old) commit e8f5bdb0

 ("[PATCH] Makefile include path ordering").
It's a little unclear to me if the point of that patch was to switch
the variable to be recursively expanded (which it did) or to avoid
directly assigning to NOSTDINC_FLAGS (AKA to switch to +=) because
someone else (out of tree?) was setting it.  I presume later since if
the only goal was to switch to recursive expansion the patch would
have just removed the ":".

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

* The man page for dpkg-source(1) notes:

>      -b, --build directory [format-specific-parameters]
>             Build  a  source  package  (--build since dpkg 1.17.14).
>             <...>
>
>             dpkg-source will build the source package with the first
>             format found in this ordered list: the format  indicated
>             with  the  --format  command  line  option,  the  format
>             indicated in debian/source/format, “1.0”.  The  fallback
>             to “1.0” is deprecated and will be removed at some point
>             in the future, you should always  document  the  desired
>             source   format  in  debian/source/format.  See  section
>             SOURCE PACKAGE FORMATS for an extensive  description  of
>             the various source package formats.

  Thus it would be more foolproof to explicitly use 1.0 (as we always
  did) than to rely on dpkg-source's defaults.

* In a similar vein, debian/rules is not made executable by mkdebian,
  and dpkg-source warns about that but still silently fixes the file.
  Let's be explicit once again.

Signed-off-by: Arseny Maslennikov <ar@cs.msu.ru>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>