- Sep 23, 2023
-
-
Zhen Lei authored[ Upstream commit 4d0fe8c5 ] When I register a kset in the following way: static struct kset my_kset; kobject_set_name(&my_kset.kobj, "my_kset"); ret = kset_register(&my_kset); A null pointer dereference exception is occurred: [ 4453.568337] Unable to handle kernel NULL pointer dereference at \ virtual address 0000000000000028 ... ... [ 4453.810361] Call trace: [ 4453.813062] kobject_get_ownership+0xc/0x34 [ 4453.817493] kobject_add_internal+0x98/0x274 [ 4453.822005] kset_register+0x5c/0xb4 [ 4453.825820] my_kobj_init+0x44/0x1000 [my_kset] ... ... Because I didn't initialize my_kset.kobj.ktype. According to the description in Documentation/core-api/kobject.rst: - A ktype is the type of object that embeds a kobject. Every structure that embeds a kobject needs a corresponding ktype. So add sanity check to make sure kset->kobj.ktype is not NULL. Signed-off-by:
Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20230805084114.1298-2-thunder.leizhen@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Sakari Ailus authored
[ Upstream commit 9d7531be ] Initialise timing struct in cio2_hw_init() to zero in order to avoid a compiler warning. The warning was a false positive. Reported-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Xu Yang authored
[ Upstream commit 12e6ac69 ] Some NXP processors using ChipIdea USB IP have a bug when frame babble is detected. Issue description: In USB camera test, our controller is host in HS mode. In ISOC IN, when device sends data across the micro frame, it causes the babble in host controller. This will clear the PE bit. In spec, it also requires to set the PEC bit and then set the PCI bit. Without the PCI interrupt, the software does not know the PE is cleared. This will add a flag CI_HDRC_HAS_PORTSC_PEC_MISSED to some impacted platform datas. And the ehci host driver will assert PEC by SW when specific conditions are satisfied. Signed-off-by:
Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20230809024432.535160-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Xu Yang authored
[ Upstream commit dda4b60e ] Some NXP processor using chipidea IP has a bug when frame babble is detected. As per 4.15.1.1.1 Serial Bus Babble: A babble condition also exists if IN transaction is in progress at High-speed SOF2 point. This is called frame babble. The host controller must disable the port to which the frame babble is detected. The USB controller has disabled the port (PE cleared) and has asserted USBERRINT when frame babble is detected, but PEC is not asserted. Therefore, the SW isn't aware that port has been disabled. Then the SW keeps sending packets to this port, but all of the transfers will fail. This workaround will firstly assert PCD by SW when USBERRINT is detected and then judge whether port change has really occurred or not by polling roothub status. Because the PEC doesn't get asserted in our case, this patch will also assert it by SW when specific conditions are satisfied. Signed-off-by:
Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20230809024432.535160-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Baoquan He authored
[ Upstream commit aefc8b57 ] On s390 systems (aka mainframes), it has classic channel devices for networking and permanent storage that are currently even more common than PCI devices. Hence it could have a fully functional s390 kernel with CONFIG_PCI=n, then the relevant iomem mapping functions [including ioremap(), devm_ioremap(), etc.] are not available. Here let OPEN_DICE depend on HAS_IOMEM so that it won't be built to cause below compiling error if PCI is unset: ------ ERROR: modpost: "devm_memremap" [drivers/misc/open-dice.ko] undefined! ERROR: modpost: "devm_memunmap" [drivers/misc/open-dice.ko] undefined! ------ Reported-by:
kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306211329.ticOJCSv-lkp@intel.com/
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Derek Kiernan <derek.kiernan@amd.com>
Cc: Dragan Cvetic <dragan.cvetic@amd.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230707135852.24292-4-bhe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Christophe Leroy authored
[ Upstream commit 36ef11d3 ] CHECK drivers/tty/serial/cpm_uart/cpm_uart_core.c drivers/tty/serial/cpm_uart/cpm_uart_core.c:1271:39: warning: context imbalance in 'cpm_uart_console_write' - unexpected unlock Allthough 'nolock' is not expected to change, sparse find the following form suspicious: if (unlikely(nolock)) { local_irq_save(flags); } else { spin_lock_irqsave(&pinfo->port.lock, flags); } cpm_uart_early_write(pinfo, s, count, true); if (unlikely(nolock)) { local_irq_restore(flags); } else { spin_unlock_irqrestore(&pinfo->port.lock, flags); } Rewrite it a more obvious form: if (unlikely(oops_in_progress)) { local_irq_save(flags); cpm_uart_early_write(pinfo, s, count, true); local_irq_restore(flags); } else { spin_lock_irqsave(&pinfo->port.lock, flags); cpm_uart_early_write(pinfo, s, count, true); spin_unlock_irqrestore(&pinfo->port.lock, flags); } Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/f7da5cdc9287960185829cfef681a7d8614efa1f.1691068700.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Konstantin Shelekhin authored
[ Upstream commit 801f287c ] The function lio_target_nacl_info_show() uses sprintf() in a loop to print details for every iSCSI connection in a session without checking for the buffer length. With enough iSCSI connections it's possible to overflow the buffer provided by configfs and corrupt the memory. This patch replaces sprintf() with sysfs_emit_at() that checks for buffer boundries. Signed-off-by:
Konstantin Shelekhin <k.shelekhin@yadro.com>
Link: https://lore.kernel.org/r/20230722152657.168859-2-k.shelekhin@yadro.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Chenyuan Mi authored
[ Upstream commit 49d73631 ] In function size_from_channelarray(), the return value 'bytes' is defined as int type. However, the calcution of 'bytes' in this function is designed to use the unsigned int type. So it is necessary to change 'bytes' type to unsigned int to avoid integer overflow. The size_from_channelarray() is called in main() function, its return value is directly multipled by 'buf_len' and then used as the malloc() parameter. The 'buf_len' is completely controllable by user, thus a multiplication overflow may occur here. This could allocate an unexpected small area. Signed-off-by:
Chenyuan Mi <michenyuan@huawei.com>
Link: https://lore.kernel.org/r/20230725092407.62545-1-michenyuan@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Ma Ke authored
[ Upstream commit ce9daa2e ] We should verify the bound of the array to assure that host may not manipulate the index to point past endpoint array. Signed-off-by:
Ma Ke <make_ruc2021@163.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20230628081511.186850-1-make_ruc2021@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Xiaolei Wang authored
[ Upstream commit 2319b9c8 ] The device may be scheduled during the resume process, so this cannot appear in atomic operations. Since pm_runtime_set_active will resume suppliers, put set active outside the spin lock, which is only used to protect the struct cdns data structure, otherwise the kernel will report the following warning: BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1163 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 651, name: sh preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 CPU: 0 PID: 651 Comm: sh Tainted: G WC 6.1.20 #1 Hardware name: Freescale i.MX8QM MEK (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x64/0x80 dump_stack+0x1c/0x38 __might_resched+0x1fc/0x240 __might_sleep+0x68/0xc0 __pm_runtime_resume+0x9c/0xe0 rpm_get_suppliers+0x68/0x1b0 __pm_runtime_set_status+0x298/0x560 cdns_resume+0xb0/0x1c0 cdns3_controller_resume.isra.0+0x1e0/0x250 cdns3_plat_resume+0x28/0x40 Signed-off-by:
Xiaolei Wang <xiaolei.wang@windriver.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20230616021952.1025854-1-xiaolei.wang@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Hans Verkuil authored
[ Upstream commit 2e1796fd ] It was completely unnecessary to use BUG in buffer_prepare(). Just replace it with an error return. This also fixes a smatch warning: drivers/media/pci/cx23885/cx23885-video.c:422 buffer_prepare() error: uninitialized symbol 'ret'. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Hans Verkuil authored
[ Upstream commit ee630b29 ] BUG_ON is unnecessary here, and in addition it confuses smatch. Replacing this with an error return help resolve this smatch warning: drivers/media/tuners/qt1010.c:350 qt1010_init() error: buffer overflow 'i2c_data' 34 <= 34 Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Justin Tee authored
[ Upstream commit 089ea22e ] A mailbox timeout error usually indicates something has gone wrong, and a follow up reset of the HBA is a typical recovery mechanism. Introduce a MBX_TMO_ERR flag to detect such cases and have lpfc_els_flush_cmd abort ELS commands if the MBX_TMO_ERR flag condition was set. This ensures all of the registered SGL resources meant for ELS traffic are not leaked after an HBA reset. Signed-off-by:
Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230712180522.112722-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Zhang Shurong authored
[ Upstream commit b97719a6 ] In gl861_i2c_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach gl861_i2c_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Signed-off-by:
Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Zhang Shurong authored
[ Upstream commit 1047f934 ] In az6007_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach az6007_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Signed-off-by:
Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Zhang Shurong authored
[ Upstream commit c3041126 ] In anysee_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach anysee_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Signed-off-by:
Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: add spaces around +]
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Zhang Shurong authored
[ Upstream commit f4ee84f2 ] In af9005_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach af9005_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Signed-off-by:
Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Zhang Shurong authored
[ Upstream commit 5ae544d9 ] In dw2102_i2c_transfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach dw2102_i2c_transfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 950e252c ("[media] dw2102: limit messages to buffer size") Signed-off-by:
Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Zhang Shurong authored
[ Upstream commit 7bf744f2 ] In af9035_i2c_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach af9035_i2c_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") Signed-off-by:
Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ moved variable declaration to fix build issues in older kernels - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -
Lu Hongfei authored
[ Upstream commit 35ca8ce4 ] Use put_device to release the object get through of_find_device_by_node, avoiding resource leaks. Signed-off-by:
Lu Hongfei <luhongfei@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Yong-Xuan Wang authored
[ Upstream commit 551a60e1 ] The iMSI-RX module of the DW PCIe controller provides multiple sets of MSI_CTRL_INT_i_* registers, and each set is capable of handling 32 MSI interrupts. However, the fu740 PCIe controller driver only enabled one set of MSI_CTRL_INT_i_* registers, as the total number of supported interrupts was not specified. Set the supported number of MSI vectors to enable all the MSI_CTRL_INT_i_* registers on the fu740 PCIe core, allowing the system to fully utilize the available MSI interrupts. Link: https://lore.kernel.org/r/20230807055621.2431-1-yongxuan.wang@sifive.com Signed-off-by:
Yong-Xuan Wang <yongxuan.wang@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Nirmal Patel authored
[ Upstream commit f73eedc9 ] During domain reset process vmd_domain_reset() clears PCI configuration space of VMD root ports. But certain platform has observed following errors and failed to boot. ... DMAR: VT-d detected Invalidation Queue Error: Reason f DMAR: VT-d detected Invalidation Time-out Error: SID ffff DMAR: VT-d detected Invalidation Completion Error: SID ffff DMAR: QI HEAD: UNKNOWN qw0 = 0x0, qw1 = 0x0 DMAR: QI PRIOR: UNKNOWN qw0 = 0x0, qw1 = 0x0 DMAR: Invalidation Time-out Error (ITE) cleared The root cause is that memset_io() clears prefetchable memory base/limit registers and prefetchable base/limit 32 bits registers sequentially. This seems to be enabling prefetchable memory if the device disabled prefetchable memory originally. Here is an example (before memset_io()): PCI configuration space for 10000:00:00.0: 86 80 30 20 06 00 10 00 04 00 04 06 00 00 01 00 00 00 00 00 00 00 00 00 00 01 01 00 00 00 00 20 00 00 00 00 01 00 01 00 ff ff ff ff 75 05 00 00 ... So, prefetchable memory is ffffffff00000000-575000fffff, which is disabled. When memset_io() clears prefetchable base 32 bits register, the prefetchable memory becomes 0000000000000000-575000fffff, which is enabled and incorrect. Here is the quote from section 7.5.1.3.9 of PCI Express Base 6.0 spec: The Prefetchable Memory Limit register must be programmed to a smaller value than the Prefetchable Memory Base register if there is no prefetchable memory on the secondary side of the bridge. This is believed to be the reason for the failure and in addition the sequence of operation in vmd_domain_reset() is not following the PCIe specs. Disable the bridge window by executing a sequence of operations borrowed from pci_disable_bridge_window() and pci_setup_bridge_io(), that comply with the PCI specifications. Link: https://lore.kernel.org/r/20230810215029.1177379-1-nirmal.patel@linux.intel.com Signed-off-by:
Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
ruanjinjie authored
[ Upstream commit afda85b9 ] If device_register() returns error in ibmebus_bus_init(), name of kobject which is allocated in dev_set_name() called in device_add() is leaked. As comment of device_add() says, it should call put_device() to drop the reference count that was set in device_initialize() when it fails, so the name can be freed in kobject_cleanup(). Signed-off-by:
ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20221110011929.3709774-1-ruanjinjie@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Mårten Lindahl authored
[ Upstream commit 8922ba71 ] If a panic is triggered by a hrtimer interrupt all online cpus will be notified and set offline. But as highlighted by commit 19dbdcb8 ("smp: Warn on function calls from softirq context") this call should not be made synchronous with disabled interrupts: softdog: Initiating panic Kernel panic - not syncing: Software Watchdog Timer expired WARNING: CPU: 1 PID: 0 at kernel/smp.c:753 smp_call_function_many_cond unwind_backtrace: show_stack dump_stack_lvl __warn warn_slowpath_fmt smp_call_function_many_cond smp_call_function crash_smp_send_stop.part.0 machine_crash_shutdown __crash_kexec panic softdog_fire __hrtimer_run_queues hrtimer_interrupt Make the smp call for machine_crash_nonpanic_core() asynchronous. Signed-off-by:
Mårten Lindahl <marten.lindahl@axis.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Mark Brown authored
[ Upstream commit fc8b24c2 ] The i.MX integration for the DesignWare PCI controller has a _host_exit() operation which undoes everything that the _host_init() operation does but does not wire this up as the host_deinit callback for the core, or call it in any path other than suspend. This means that if we ever unwind the initial probe of the device, for example because it fails, the regulator core complains that the regulators for the device were left enabled: imx6q-pcie 33800000.pcie: iATU: unroll T, 4 ob, 4 ib, align 64K, limit 16G imx6q-pcie 33800000.pcie: Phy link never came up imx6q-pcie 33800000.pcie: Phy link never came up imx6q-pcie: probe of 33800000.pcie failed with error -110 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 46 at drivers/regulator/core.c:2396 _regulator_put+0x110/0x128 Wire up the callback so that the core can clean up after itself. Link: https://lore.kernel.org/r/20230731-pci-imx-regulator-cleanup-v2-1-fc8fa5c9893d@kernel.org Tested-by:
Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Liu Shixin via Jfs-discussion authored
[ Upstream commit 6e2bda2c ] syzbot found an invalid-free in diUnmount: BUG: KASAN: double-free in slab_free mm/slub.c:3661 [inline] BUG: KASAN: double-free in __kmem_cache_free+0x71/0x110 mm/slub.c:3674 Free of addr ffff88806f410000 by task syz-executor131/3632 CPU: 0 PID: 3632 Comm: syz-executor131 Not tainted 6.1.0-rc7-syzkaller-00012-gca57f02295f1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:284 print_report+0x107/0x1f0 mm/kasan/report.c:395 kasan_report_invalid_free+0xac/0xd0 mm/kasan/report.c:460 ____kasan_slab_free+0xfb/0x120 kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1724 [inline] slab_free_freelist_hook+0x12e/0x1a0 mm/slub.c:1750 slab_free mm/slub.c:3661 [inline] __kmem_cache_free+0x71/0x110 mm/slub.c:3674 diUnmount+0xef/0x100 fs/jfs/jfs_imap.c:195 jfs_umount+0x108/0x370 fs/jfs/jfs_umount.c:63 jfs_put_super+0x86/0x190 fs/jfs/super.c:194 generic_shutdown_super+0x130/0x310 fs/super.c:492 kill_block_super+0x79/0xd0 fs/super.c:1428 deactivate_locked_super+0xa7/0xf0 fs/super.c:332 cleanup_mnt+0x494/0x520 fs/namespace.c:1186 task_work_run+0x243/0x300 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x664/0x2070 kernel/exit.c:820 do_group_exit+0x1fd/0x2b0 kernel/exit.c:950 __do_sys_exit_group kernel/exit.c:961 [inline] __se_sys_exit_group kernel/exit.c:959 [inline] __x64_sys_exit_group+0x3b/0x40 kernel/exit.c:959 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] JFS_IP(ipimap)->i_imap is not setting to NULL after free in diUnmount. If jfs_remount() free JFS_IP(ipimap)->i_imap but then failed at diMount(). JFS_IP(ipimap)->i_imap will be freed once again. Fix this problem by setting JFS_IP(ipimap)->i_imap to NULL after free. Reported-by:
<syzbot+90a11e6b1e810785c6ff@syzkaller.appspotmail.com>
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Andrew Kanner authored
[ Upstream commit cade5397 ] Syzkaller reported the following issue: ================================================================== BUG: KASAN: double-free in slab_free mm/slub.c:3787 [inline] BUG: KASAN: double-free in __kmem_cache_free+0x71/0x110 mm/slub.c:3800 Free of addr ffff888086408000 by task syz-executor.4/12750 [...] Call Trace: <TASK> [...] kasan_report_invalid_free+0xac/0xd0 mm/kasan/report.c:482 ____kasan_slab_free+0xfb/0x120 kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1781 [inline] slab_free_freelist_hook+0x12e/0x1a0 mm/slub.c:1807 slab_free mm/slub.c:3787 [inline] __kmem_cache_free+0x71/0x110 mm/slub.c:3800 dbUnmount+0xf4/0x110 fs/jfs/jfs_dmap.c:264 jfs_umount+0x248/0x3b0 fs/jfs/jfs_umount.c:87 jfs_put_super+0x86/0x190 fs/jfs/super.c:194 generic_shutdown_super+0x130/0x310 fs/super.c:492 kill_block_super+0x79/0xd0 fs/super.c:1386 deactivate_locked_super+0xa7/0xf0 fs/super.c:332 cleanup_mnt+0x494/0x520 fs/namespace.c:1291 task_work_run+0x243/0x300 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop+0x124/0x150 kernel/entry/common.c:171 exit_to_user_mode_prepare+0xb2/0x140 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x26/0x60 kernel/entry/common.c:296 do_syscall_64+0x49/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] </TASK> Allocated by task 13352: kasan_save_stack mm/kasan/common.c:45 [inline] kasan_set_track+0x3d/0x60 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:371 [inline] __kasan_kmalloc+0x97/0xb0 mm/kasan/common.c:380 kmalloc include/linux/slab.h:580 [inline] dbMount+0x54/0x980 fs/jfs/jfs_dmap.c:164 jfs_mount+0x1dd/0x830 fs/jfs/jfs_mount.c:121 jfs_fill_super+0x590/0xc50 fs/jfs/super.c:556 mount_bdev+0x26c/0x3a0 fs/super.c:1359 legacy_get_tree+0xea/0x180 fs/fs_context.c:610 vfs_get_tree+0x88/0x270 fs/super.c:1489 do_new_mount+0x289/0xad0 fs/namespace.c:3145 do_mount fs/namespace.c:3488 [inline] __do_sys_mount fs/namespace.c:3697 [inline] __se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 13352: kasan_save_stack mm/kasan/common.c:45 [inline] kasan_set_track+0x3d/0x60 mm/kasan/common.c:52 kasan_save_free_info+0x27/0x40 mm/kasan/generic.c:518 ____kasan_slab_free+0xd6/0x120 mm/kasan/common.c:236 kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1781 [inline] slab_free_freelist_hook+0x12e/0x1a0 mm/slub.c:1807 slab_free mm/slub.c:3787 [inline] __kmem_cache_free+0x71/0x110 mm/slub.c:3800 dbUnmount+0xf4/0x110 fs/jfs/jfs_dmap.c:264 jfs_mount_rw+0x545/0x740 fs/jfs/jfs_mount.c:247 jfs_remount+0x3db/0x710 fs/jfs/super.c:454 reconfigure_super+0x3bc/0x7b0 fs/super.c:935 vfs_fsconfig_locked fs/fsopen.c:254 [inline] __do_sys_fsconfig fs/fsopen.c:439 [inline] __se_sys_fsconfig+0xad5/0x1060 fs/fsopen.c:314 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] JFS_SBI(ipbmap->i_sb)->bmap wasn't set to NULL after kfree() in dbUnmount(). Syzkaller uses faultinject to reproduce this KASAN double-free warning. The issue is triggered if either diMount() or dbMount() fail in jfs_remount(), since diUnmount() or dbUnmount() already happened in such a case - they will do double-free on next execution: jfs_umount or jfs_remount. Tested on both upstream and jfs-next by syzkaller. Reported-and-tested-by:
<syzbot+6a93efb725385bc4b2e9@syzkaller.appspotmail.com>
Closes: https://lore.kernel.org/all/000000000000471f2d05f1ce8bad@google.com/T/
Link: https://syzkaller.appspot.com/bug?extid=6a93efb725385bc4b2e9
Signed-off-by: Andrew Kanner <andrew.kanner@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Georg Ottinger authored
[ Upstream commit e8807634 ] I run a small server that uses external hard drives for backups. The backup software I use uses ext2 filesystems with 4KiB block size and the server is running SELinux and therefore relies on xattr. I recently upgraded the hard drives from 4TB to 12TB models. I noticed that after transferring some TBs I got a filesystem error "Freeing blocks not in datazone - block = 18446744071529317386, count = 1" and the backup process stopped. Trying to fix the fs with e2fsck resulted in a completely corrupted fs. The error probably came from ext2_free_blocks(), and because of the large number 18e19 this problem immediately looked like some kind of integer overflow. Whereas the 4TB fs was about 1e9 blocks, the new 12TB is about 3e9 blocks. So, searching the ext2 code, I came across the line in fs/ext2/xattr.c:745 where ext2_new_block() is called and the resulting block number is stored in the variable block as an int datatype. If a block with a block number greater than INT32_MAX is returned, this variable overflows and the call to sb_getblk() at line fs/ext2/xattr.c:750 fails, then the call to ext2_free_blocks() produces the error. Signed-off-by:
Georg Ottinger <g.ottinger@gmx.at>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230815100340.22121-1-g.ottinger@gmx.at>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Zhang Shurong authored
[ Upstream commit 8b0472b5 ] If rddev->raid_disk is greater than mddev->raid_disks, there will be an out-of-bounds in raid1_remove_disk(). We have already found similar reports as follows: 1) commit d17f744e ("md-raid10: fix KASAN warning") 2) commit 1ebc2cec ("dm raid: fix KASAN warning in raid5_remove_disk") Fix this bug by checking whether the "number" variable is valid. Signed-off-by:
Zhang Shurong <zhang_shurong@foxmail.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/tencent_0D24426FAC6A21B69AC0C03CE4143A508F09@qq.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Tony Lindgren authored
[ Upstream commit 03a711d3 ] Enable the uart quirks similar to the earlier SoCs. Let's assume we are likely going to need a k3 specific quirk mask separate from the earlier SoCs, so let's not start changing the revision register mask at this point. Note that SYSC_QUIRK_LEGACY_IDLE will be needed until we can remove the need for pm_runtime_irq_safe() from 8250_omap driver. Reviewed-by:
Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
AngeloGioacchino Del Regno authored
[ Upstream commit fd70e201 ] Change logging from drm_{err,info}() to dev_{err,info}() in functions mtk_dp_aux_transfer() and mtk_dp_aux_do_transfer(): this will be essential to avoid getting NULL pointer kernel panics if any kind of error happens during AUX transfers happening before the bridge is attached. This may potentially start happening in a later commit implementing aux-bus support, as AUX transfers will be triggered from the panel driver (for EDID) before the mtk-dp bridge gets attached, and it's done in preparation for the same. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230725073234.55892-4-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Tuo Li authored
drm/exynos: fix a possible null-pointer dereference due to data race in exynos_drm_crtc_atomic_disable() [ Upstream commit 2e63972a ] The variable crtc->state->event is often protected by the lock crtc->dev->event_lock when is accessed. However, it is accessed as a condition of an if statement in exynos_drm_crtc_atomic_disable() without holding the lock: if (crtc->state->event && !crtc->state->active) However, if crtc->state->event is changed to NULL by another thread right after the conditions of the if statement is checked to be true, a null-pointer dereference can occur in drm_crtc_send_vblank_event(): e->pipe = pipe; To fix this possible null-pointer dereference caused by data race, the spin lock coverage is extended to protect the if statement as well as the function call to drm_crtc_send_vblank_event(). Reported-by:
BassCheck <bass@buaa.edu.cn>
Link: https://sites.google.com/view/basscheck/home
Signed-off-by: Tuo Li <islituo@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Added relevant link.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Leo Chen authored
[ Upstream commit 4c6107a6 ] [Why & How] HDMI TMDS does not have ODM support. Filtering 420 modes that exceed the 4096 FMT limitation on DCN314 will resolve intermittent corruptions issues. Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Leo Chen authored
[ Upstream commit 026a71ba ] [Why & How] HDMI TMDS does not have ODM support. Filtering 420 modes that exceed the 4096 FMT limitation on DCN31 will resolve intermittent corruptions issues. Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Austin Zheng authored
[ Upstream commit 4a30cc2b ] [Why] Flash of corruption observed when UCLK switching after transitioning from DTBCLK to DPREFCLK on subVP(DP) + subVP(HDMI) config Scenario where DPREFCLK is required instead of DTBCLK is not expected [How] Always set the DTBCLK source as DTBCLK0 Reviewed-by:
Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Pierre-Louis Bossart authored
[ Upstream commit d2852b8c ] One more PCI ID for the road. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802150105.24604-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Uday M Bhat authored
[ Upstream commit a14aded9 ] For soundwire config, SSP1 is used for BT offload. This is enabled in sof_sdw_quirk_table Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230731214257.444605-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Pierre-Louis Bossart authored
[ Upstream commit 55cb3dc2 ] make KCFLAGS='-fanalyzer' sound/soc/sof/intel/ reports a possible NULL pointer dereference. sound/soc/sof/topology.c:1136:21: error: dereference of NULL ‘w’ [CWE-476] [-Werror=analyzer-null-dereference] 1136 | strcmp(w->sname, rtd->dai_link->stream_name)) The code is rather confusing and can be simplified to make static analysis happy. No functionality change. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Yaochun Hung <yc.hung@mediatek.com>
Link: https://lore.kernel.org/r/20230731213748.440285-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Leo Ma authored
[ Upstream commit 735688eb ] [Why] Screen underflows happen on 175hz timing for 3 plane overlay case. [How] Based on dst y prefetch value clamp to equ or oto for bandwidth calculation. Reviewed-by:
Dillon Varone <dillon.varone@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org> -
Rong Tao authored
[ Upstream commit 910e230d ] Macro symbol_put() is defined as __symbol_put(__stringify(x)) ksym_name = "jiffies" symbol_put(ksym_name) will be resolved as __symbol_put("ksym_name") which is clearly wrong. So symbol_put must be replaced with __symbol_put. When we uninstall hw_breakpoint.ko (rmmod), a kernel bug occurs with the following error: [11381.854152] kernel BUG at kernel/module/main.c:779! [11381.854159] invalid opcode: 0000 [#2] PREEMPT SMP PTI [11381.854163] CPU: 8 PID: 59623 Comm: rmmod Tainted: G D OE 6.2.9-200.fc37.x86_64 #1 [11381.854167] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B360M-HDV, BIOS P3.20 10/23/2018 [11381.854169] RIP: 0010:__symbol_put+0xa2/0xb0 [11381.854175] Code: 00 e8 92 d2 f7 ff 65 8b 05 c3 2f e6 78 85 c0 74 1b 48 8b 44 24 30 65 48 2b 04 25 28 00 00 00 75 12 48 83 c4 38 c3 cc cc cc cc <0f> 0b 0f 1f 44 00 00 eb de e8 c0 df d8 00 90 90 90 90 90 90 90 90 [11381.854178] RSP: 0018:ffffad8ec6ae7dd0 EFLAGS: 00010246 [11381.854181] RAX: 0000000000000000 RBX: ffffffffc1fd1240 RCX: 000000000000000c [11381.854184] RDX: 000000000000006b RSI: ffffffffc02bf7c7 RDI: ffffffffc1fd001c [11381.854186] RBP: 000055a38b76e7c8 R08: ffffffff871ccfe0 R09: 0000000000000000 [11381.854188] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [11381.854190] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [11381.854192] FS: 00007fbf7c62c740(0000) GS:ffff8c5badc00000(0000) knlGS:0000000000000000 [11381.854195] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [11381.854197] CR2: 000055a38b7793f8 CR3: 0000000363e1e001 CR4: 00000000003726e0 [11381.854200] DR0: ffffffffb3407980 DR1: 0000000000000000 DR2: 0000000000000000 [11381.854202] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [11381.854204] Call Trace: [11381.854207] <TASK> [11381.854212] s_module_exit+0xc/0xff0 [symbol_getput] [11381.854219] __do_sys_delete_module.constprop.0+0x198/0x2f0 [11381.854225] do_syscall_64+0x58/0x80 [11381.854231] ? exit_to_user_mode_prepare+0x180/0x1f0 [11381.854237] ? syscall_exit_to_user_mode+0x17/0x40 [11381.854241] ? do_syscall_64+0x67/0x80 [11381.854245] ? syscall_exit_to_user_mode+0x17/0x40 [11381.854248] ? do_syscall_64+0x67/0x80 [11381.854252] ? exc_page_fault+0x70/0x170 [11381.854256] entry_SYSCALL_64_after_hwframe+0x72/0xdc Signed-off-by:
Rong Tao <rongtao@cestc.cn>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
-