- May 31, 2019
-
-
Pablo Neira Ayuso authored
Deal with the IPCB() area away from the iterators. The bridge codebase has its own control buffer layout, move specific IP control buffer handling into the IPv4 codepath. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pablo Neira Ayuso authored
This patch exposes a new API to refragment a skbuff. This allows you to split either a linear skbuff or to force the refragmentation of an existing fraglist using a different mtu. The API consists of: * ip6_frag_init(), that initializes the internal state of the transformer. * ip6_frag_next(), that allows you to fetch the next fragment. This function internally allocates the skbuff that represents the fragment, it pushes the IPv6 header, and it also copies the payload for each fragment. The ip6_frag_state object stores the internal state of the splitter. This code has been extracted from ip6_fragment(). Symbols are also exported to allow to reuse this iterator from the bridge codepath to build its own refragmentation routine by reusing the existing codebase. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pablo Neira Ayuso authored
This patch exposes a new API to refragment a skbuff. This allows you to split either a linear skbuff or to force the refragmentation of an existing fraglist using a different mtu. The API consists of: * ip_frag_init(), that initializes the internal state of the transformer. * ip_frag_next(), that allows you to fetch the next fragment. This function internally allocates the skbuff that represents the fragment, it pushes the IPv4 header, and it also copies the payload for each fragment. The ip_frag_state object stores the internal state of the splitter. This code has been extracted from ip_do_fragment(). Symbols are also exported to allow to reuse this iterator from the bridge codepath to build its own refragmentation routine by reusing the existing codebase. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pablo Neira Ayuso authored
This patch adds the skbuff fraglist split iterator. This API provides an iterator to transform the fraglist into single skbuff objects, it consists of: * ip6_fraglist_init(), that initializes the internal state of the fraglist iterator. * ip6_fraglist_prepare(), that restores the IPv6 header on the fragment. * ip6_fraglist_next(), that retrieves the fragment from the fraglist and updates the internal state of the iterator to point to the next fragment in the fraglist. The ip6_fraglist_iter object stores the internal state of the iterator. This code has been extracted from ip6_fragment(). Symbols are also exported to allow to reuse this iterator from the bridge codepath to build its own refragmentation routine by reusing the existing codebase. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pablo Neira Ayuso authored
This patch adds the skbuff fraglist splitter. This API provides an iterator to transform the fraglist into single skbuff objects, it consists of: * ip_fraglist_init(), that initializes the internal state of the fraglist splitter. * ip_fraglist_prepare(), that restores the IPv4 header on the fragments. * ip_fraglist_next(), that retrieves the fragment from the fraglist and it updates the internal state of the splitter to point to the next fragment skbuff in the fraglist. The ip_fraglist_iter object stores the internal state of the iterator. This code has been extracted from ip_do_fragment(). Symbols are also exported to allow to reuse this iterator from the bridge codepath to build its own refragmentation routine by reusing the existing codebase. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jason Baron says: ==================== add TFO backup key Christoph, Igor, and I have worked on an API that facilitates TFO key rotation. This is a follow up to the series that Christoph previously posted, with an API that meets both of our use-cases. Here's a link to the previous work: https://patchwork.ozlabs.org/cover/1013753/ Changes in v2: -spelling fixes in ip-sysctl.txt (Jeremy Sowden) -re-base to latest net-next ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason Baron authored
Demonstrate how the primary and backup TFO keys can be rotated while minimizing the number of client cookies that are rejected. Signed-off-by:
Jason Baron <jbaron@akamai.com> Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason Baron authored
Add docs for /proc/sys/net/ipv4/tcp_fastopen_key Signed-off-by:
Jason Baron <jbaron@akamai.com> Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Cc: Jeremy Sowden <jeremy@azazel.net> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason Baron authored
Add the ability to add a backup TFO key as: # echo "x-x-x-x,x-x-x-x" > /proc/sys/net/ipv4/tcp_fastopen_key The key before the comma acks as the primary TFO key and the key after the comma is the backup TFO key. This change is intended to be backwards compatible since if only one key is set, userspace will simply read back that single key as follows: # echo "x-x-x-x" > /proc/sys/net/ipv4/tcp_fastopen_key # cat /proc/sys/net/ipv4/tcp_fastopen_key x-x-x-x Signed-off-by:
Jason Baron <jbaron@akamai.com> Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason Baron authored
Add support for get/set of an optional backup key via TCP_FASTOPEN_KEY, in addition to the current 'primary' key. The primary key is used to encrypt and decrypt TFO cookies, while the backup is only used to decrypt TFO cookies. The backup key is used to maximize successful TFO connections when TFO keys are rotated. Currently, TCP_FASTOPEN_KEY allows a single 16-byte primary key to be set. This patch now allows a 32-byte value to be set, where the first 16 bytes are used as the primary key and the second 16 bytes are used for the backup key. Similarly, for getsockopt(), we can receive a 32-byte value as output if requested. If a 16-byte value is used to set the primary key via TCP_FASTOPEN_KEY, then any previously set backup key will be removed. Signed-off-by:
Jason Baron <jbaron@akamai.com> Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason Baron authored
We would like to be able to rotate TFO keys while minimizing the number of client cookies that are rejected. Currently, we have only one key which can be used to generate and validate cookies, thus if we simply replace this key clients can easily have cookies rejected upon rotation. We propose having the ability to have both a primary key and a backup key. The primary key is used to generate as well as to validate cookies. The backup is only used to validate cookies. Thus, keys can be rotated as: 1) generate new key 2) add new key as the backup key 3) swap the primary and backup key, thus setting the new key as the primary We don't simply set the new key as the primary key and move the old key to the backup slot because the ip may be behind a load balancer and we further allow for the fact that all machines behind the load balancer will not be updated simultaneously. We make use of this infrastructure in subsequent patches. Suggested-by:
Igor Lubashev <ilubashe@akamai.com> Signed-off-by:
Jason Baron <jbaron@akamai.com> Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Christoph Paasch authored
Restructure __tcp_fastopen_cookie_gen() to take a 'struct crypto_cipher' argument and rename it as __tcp_fastopen_cookie_gen_cipher(). Subsequent patches will provide different ciphers based on which key is being used for the cookie generation. Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
Jason Baron <jbaron@akamai.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Hardware monitoring enhancements This patchset from Vadim provides various hardware monitoring related improvements for mlxsw. Patch #1 allows querying firmware version from the switch driver when the underlying bus is I2C. This is useful for baseboard management controller (BMC) systems that communicate with the ASIC over I2C. Patch #2 improves driver's performance over I2C by utilizing larger transactions sizes, if possible. Patch #3 re-orders driver's initialization sequence to enforce a specific firmware version before new firmware features are utilized. This is a prerequisite for patches #4-#6. Patches #4-#6 expose the temperature of inter-connect devices (gearboxes) that are present in Mellanox SN3800 systems and split 2x50Gb/s lanes to 4x25Gb/s lanes. Patches #7-#8 reduce the transaction size when reading SFP modules temperatures, which is crucial when working over I2C. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vadim Pasternak authored
Obtain SFP modules temperatures through MTMP register instead of MTBR register, because the first one utilizes shorter transaction buffer size for request. It improves performance in case low frequency interface (I2C) is used for communication with a chip. Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vadim Pasternak authored
Extend sensor index size for Management Temperature Bulk Register (MTBR) and Management Temperature Register (MTMP) upto 12 bits in order to align registers description with new version of PRM document. Add define for base sensor index for SFP modules temperature reading for MTMP register. Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vadim Pasternak authored
Add new attributes to hwmon object for exposing inter-connects temperature input, highest, reset_history temperatures and label. Temperatures are read from Management Temperature Register. The number of inter-connect devices is read from Management General Peripheral Information Register. Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vadim Pasternak authored
Add MGPIR - Management General Peripheral Information Register, which allows software to query the hardware and firmware general information of peripheral entities as Gearboxes etc. Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vadim Pasternak authored
Extend the size of sensor_index field of MTMP (Management Temperature Register), from 8 to 12 bits due to hardware change. Add define for sensor index for Gear Box (inter-connects) temperature reading. Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
The driver core first registers with the hwmon and thermal subsystems and only then proceeds to initialize the switch driver (e.g., mlxsw_spectrum). It is only during the last stage that the current firmware version is validated and a newer one flashed, if necessary. The above means that if a new firmware feature is utilized by the hwmon/thermal code, the driver will not be able to load. Solve this by re-ordering initializing the switch driver before registering with the hwmon and thermal subsystems. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Shalom Toledo <shalomt@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vadim Pasternak authored
Current implementation uses fixed size of I2C data transaction buffer. Allow to set size of I2C transactions according to I2C physical adapter capability. For that purpose adapter read and write size is obtained from the I2C physical adapter and buffer size is set according to the minimum of these two values. If adapter does not provide such info, default buffer size is to be used. It allows to improve performance of I2C access to silicon when long size transactions are used. Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vadim Pasternak authored
Extend initialization flow with query request for firmware info in order to obtain firmware version info. This info is to be provided to minimal driver to support ethtool get_drvinfo() interface. Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jose Abreu says: ==================== net: stmmac: selftests: Two fixes Two fixes reported by kbuild. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
kfree_skb() shall be used instead of kfree(). Fix it. Fixes: 091810db ("net: stmmac: Introduce selftests support") Reported-by:
kbuild test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
Variable shall be __be16. Fix it. Fixes: 091810db ("net: stmmac: Introduce selftests support") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
The smp_store_release call in fqdir_exit cannot protect the setting of fqdir->dead as claimed because its memory barrier is only guaranteed to be one-way and the barrier precedes the setting of fqdir->dead. IOW it doesn't provide any barriers between fq->dir and the following hash table destruction. In fact, the code is safe anyway because call_rcu does provide both the memory barrier as well as a guarantee that when the destruction work starts executing all RCU readers will see the updated value for fqdir->dead. Therefore this patch removes the unnecessary smp_store_release call as well as the corresponding READ_ONCE on the read-side in order to not confuse future readers of this code. Comments have been added in their places. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
YueHaibing authored
Fix smatch warning: drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c:1236 mvpp2_ethtool_cls_rule_ins() warn: unsigned 'info->fs.location' is never less than zero. 'info->fs.location' is u32 type, never less than zero. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jisheng Zhang authored
Make use of devm_alloc_etherdev_mqs() to simplify the code. Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Rename _P to _P_VAL and _R to _R_VAL to avoid global namespace conflicts: drivers/media/dvb-frontends/tua6100.c: In function ‘tua6100_set_params’: drivers/media/dvb-frontends/tua6100.c:79: warning: "_P" redefined #define _P 32 In file included from ./include/acpi/platform/aclinux.h:54, from ./include/acpi/platform/acenv.h:152, from ./include/acpi/acpi.h:22, from ./include/linux/acpi.h:34, from ./include/linux/i2c.h:17, from drivers/media/dvb-frontends/tua6100.h:30, from drivers/media/dvb-frontends/tua6100.c:32: ./include/linux/ctype.h:14: note: this is the location of the previous definition #define _P 0x10 /* punct */ Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ruslan Babayev says: ==================== Enable SFP on ACPI based systems Changes: v2: - more descriptive commit body v3: - made 'i2c_acpi_find_adapter_by_handle' static inline v4: - don't initialize i2c_adapter to NULL. Instead see below... - handle the case of neither DT nor ACPI present as invalid. - alphabetical includes. - use has_acpi_companion(). - use the same argument name in i2c_acpi_find_adapter_by_handle() in both stubbed and non-stubbed cases. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ruslan Babayev authored
Lookup I2C adapter using the "i2c-bus" device property on ACPI based systems similar to how it's done with DT. An example DSD describing an SFP on an ACPI based system: Device (SFP0) { Name (_HID, "PRP0001") Name (_CRS, ResourceTemplate() { GpioIo(Exclusive, PullDefault, 0, 0, IoRestrictionNone, "\\_SB.PCI0.RP01.GPIO", 0, ResourceConsumer) { 0, 1, 2, 3, 4 } }) Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "compatible", "sff,sfp" }, Package () { "i2c-bus", \_SB.PCI0.RP01.I2C.MUX.CH0 }, Package () { "maximum-power-milliwatt", 1000 }, Package () { "tx-disable-gpios", Package () { ^SFP0, 0, 0, 1} }, Package () { "reset-gpio", Package () { ^SFP0, 0, 1, 1} }, Package () { "mod-def0-gpios", Package () { ^SFP0, 0, 2, 1} }, Package () { "tx-fault-gpios", Package () { ^SFP0, 0, 3, 0} }, Package () { "los-gpios", Package () { ^SFP0, 0, 4, 1} }, }, }) } Device (PHY0) { Name (_HID, "PRP0001") Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "compatible", "ethernet-phy-ieee802.3-c45" }, Package () { "sfp", \_SB.PCI0.RP01.SFP0 }, Package () { "managed", "in-band-status" }, Package () { "phy-mode", "sgmii" }, }, }) } Signed-off-by:
Ruslan Babayev <ruslan@babayev.com> Cc: xe-linux-external@cisco.com Acked-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ruslan Babayev authored
This allows drivers to lookup i2c adapters on ACPI based systems similar to of_get_i2c_adapter_by_node() with DT based systems. Signed-off-by:
Ruslan Babayev <ruslan@babayev.com> Cc: xe-linux-external@cisco.com Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- May 30, 2019
-
-
Marek Vasut authored
The HWMON_CHANNEL_INFO macro simplifies the code, reduces the likelihood of errors, and makes the code easier to read. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: linux-hwmon@vger.kernel.org Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ivan Khoronzhuk authored
It's found while review and probably never happens, but real number of queues is set per device, and error path should be per device. So split error path based on usage_count. Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ioana Ciornei says: ==================== Decoupling PHYLINK from struct net_device Following two separate discussion threads in: https://www.spinics.net/lists/netdev/msg569087.html and: https://www.spinics.net/lists/netdev/msg570450.html Previous RFC patch set: https://www.spinics.net/lists/netdev/msg571995.html PHYLINK was reworked in order to accept multiple operation types, PHYLINK_NETDEV and PHYLINK_DEV, passed through a phylink_config structure alongside the corresponding struct device. One of the main concerns expressed in the RFC was that using notifiers to signal the corresponding phylink_mac_ops would break PHYLINK's API unity and that it would become harder to grep for its users. Using the current approach, we maintain a common API for all users. Also, printing useful information in PHYLINK, when decoupled from a net_device, is achieved using dev_err&co on the struct device received (in DSA's case is the device corresponding to the dsa_switch). PHYLIB (which PHYLINK uses) was reworked to the extent that it does not crash when connecting to a PHY and the net_device pointer is NULL. Lastly, DSA has been reworked in its way that it handles PHYs for ports that lack a net_device (CPU and DSA ports). For these, it was previously using PHYLIB and is now using the PHYLINK_DEV operation type. Previously, a driver that wanted to support PHY operations on CPU/DSA ports has to implement .adjust_link(). This patch set not only gives drivers the options to use PHYLINK uniformly but also urges them to convert to it. For compatibility, the old code is kept but it will be removed once all drivers switch over. The patchset was tested on the NXP LS1021A-TSN board having the following Ethernet layout: https://lkml.org/lkml/2019/5/5/279 The CPU port was moved from the internal RGMII fixed-link (enet2 -> switch port 4) to an external loopback Cat5 cable between the enet1 port and the front-facing swp2 SJA1105 port. In this mode, both the master and the CPU port have an attached PHY which detects link change events: [ 49.105426] fsl-gianfar soc:ethernet@2d50000 eth1: Link is Down [ 50.305486] sja1105 spi0.1: Link is Down [ 53.265596] fsl-gianfar soc:ethernet@2d50000 eth1: Link is Up - 1Gbps/Full - flow control off [ 54.466304] sja1105 spi0.1: Link is Up - 1Gbps/Full - flow control off Changes in v2: - fixed sparse warnings - updated 'Documentation/ABI/testing/sysfs-class-net-phydev' ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
PHYLIB and PHYLINK handle fixed-link interfaces differently. PHYLIB wraps them in a software PHY ("pseudo fixed link") phydev construct such that .adjust_link driver callbacks see an unified API. Whereas PHYLINK simply creates a phylink_link_state structure and passes it to .mac_config. At the time the driver was introduced, DSA was using PHYLIB for the CPU/cascade ports (the ones with no net devices) and PHYLINK for everything else. As explained below: commit aab9c406 Author: Florian Fainelli <f.fainelli@gmail.com> Date: Thu May 10 13:17:36 2018 -0700 net: dsa: Plug in PHYLINK support Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2) will need to implement phylink_mac_ops from now on to preserve functionality, since PHYLINK *does not* create a phy_device instance for fixed links. In the above patch, DSA guards the .phylink_mac_config callback against a NULL phydev pointer. Therefore, .adjust_link is not called in case of a fixed-link user port. This patch fixes the situation by converting the driver from using .adjust_link to .phylink_mac_config. This can be done now in a unified fashion for both slave and CPU/cascade ports because DSA now uses PHYLINK for all ports. Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
For DSA switches that do not have an .adjust_link callback, aka those who transitioned totally to the PHYLINK-compliant API, use PHYLINK to drive the CPU/DSA ports. The PHYLIB usage and .adjust_link are kept but deprecated, and users are asked to transition from it. The reason why we can't do anything for them is because PHYLINK does not wrap the fixed-link state behind a phydev object, so we cannot wrap .phylink_mac_config into .adjust_link unless we fabricate a phy_device structure. For these ports, the newly introduced PHYLINK_DEV operation type is used and the dsa_switch device structure is passed to PHYLINK for printing purposes. The handling of the PHYLINK_NETDEV and PHYLINK_DEV PHYLINK instances is common from the perspective of the driver. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
In order to have a common handling of PHYLINK for the slave and non-user ports, the DSA core glue logic (between PHYLINK and the driver) must use an API that does not rely on a struct net_device. These will also be called by the CPU-port-handling code in a further patch. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
With the latest addition to the PHYLINK infrastructure, we are faced with a decision on when to print necessary info using the struct net_device and when with the struct device. Add a series of macros that encapsulate this decision and replace all uses of netdev_err&co with phylink_err. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
In the PHYLINK_DEV operation type, the PHYLINK infrastructure can work without an attached net_device. For printing usecases, instead, a struct device * should be passed to PHYLINK using the phylink_config structure. Also, netif_carrier_* calls ar guarded by the presence of a valid net_device. When using the PHYLINK_DEV operation type, we cannot check link status using the netif_carrier_ok() API so instead, keep an internal state of the MAC and call mac_link_{down,up} only when the link changed. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ioana Ciornei authored
The phylink_config structure will encapsulate a pointer to a struct device and the operation type requested for this instance of PHYLINK. This patch does not make any functional changes, it just transitions the PHYLINK internals and all its users to the new API. A pointer to a phylink_config structure will be passed to phylink_create() instead of the net_device directly. Also, the same phylink_config pointer will be passed back to all phylink_mac_ops callbacks instead of the net_device. Using this mechanism, a PHYLINK user can get the original net_device using a structure such as 'to_net_dev(config->dev)' or directly the structure containing the phylink_config using a container_of call. At the moment, only the PHYLINK_NETDEV is defined as a valid operation type for PHYLINK. In this mode, a valid reference to a struct device linked to the original net_device should be passed to PHYLINK through the phylink_config structure. This API changes is mainly driven by the necessity of adding a new operation type in PHYLINK that disconnects the phy_device from the net_device and also works when the net_device is lacking. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Tested-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-