Merge tag 'mvebu-fixes-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes

mvebu fixes for 5.12 (part 1)

2 fixes on on turris-omnia (Armada 38x based:)
 - Fix storm interrupt
 - Enable hardware buffer management as it should be

Unbreak AHCI on all Marvell Armada 7k8k / CN913x platforms

* tag 'mvebu-fixes-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin
  ARM: dts: turris-omnia: fix hardware buffer management
  Revert "arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts"

Link: https://lore.kernel.org/r/87a6qgctit.fsf@BL-laptop


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Use the `marvell,reg-init` DT property to configure the LED[2]/INTn pin
of the Marvell 88E1514 ethernet PHY on Turris Omnia into interrupt mode.

Without this the pin is by default in LED[2] mode, and the Marvell PHY
driver configures LED[2] into "On - Link, Blink - Activity" mode.

This fixes the issue where the pca9538 GPIO/interrupt controller (which
can't mask interrupts in HW) received too many interrupts and after a
time started ignoring the interrupt with error message:
  IRQ 71: nobody cared

There is a work in progress to have the Marvell PHY driver support
parsing PHY LED nodes from OF and registering the LEDs as Linux LED
class devices. Once this is done the PHY driver can also automatically
set the pin into INTn mode if it does not find LED[2] in OF.

Until then, though, we fix this via `marvell,reg-init` DT property.

Signed-off-by: Marek Behún <kabel@kernel.org>
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Fixes: 26ca8b52

 ("ARM: dts: add support for Turris Omnia")
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: <stable@vger.kernel.org>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Hardware buffer management has never worked on the Turris Omnia, as the
required MBus window hadn't been reserved. Fix thusly.

Fixes: 018b88ee

 ("ARM: dts: turris-omnia: enable HW buffer management")

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

The driver part of this support was not merged which leads to break
AHCI on all Marvell Armada 7k8k / CN913x platforms as it was reported
by Marcin Wojtas.

So for now let's remove it in order to fix the issue waiting for the
driver part really be merged.

This reverts commit 53e950d5.
Fixes: 53e950d5

 ("arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts")

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Clang warns about the comparison when using a 32-bit phys_addr_t:

drivers/bus/mvebu-mbus.c:621:17: error: result of comparison of constant 4294967296 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
                if (reg_start >= 0x100000000ULL)

Add a cast to shut up the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210323131952.2835509-1-arnd@kernel.org

'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The default initializer at the start of the array causes a warning
when building with W=1:

In file included from arch/arm/mach-pxa/mainstone.c:47:
arch/arm/mach-pxa/mainstone.h:124:33: error: initialized field overwritten [-Werror=override-init]
  124 | #define MAINSTONE_IRQ(x)        (MAINSTONE_NR_IRQS + (x))
      |                                 ^
arch/arm/mach-pxa/mainstone.h:133:33: note: in expansion of macro 'MAINSTONE_IRQ'
  133 | #define MAINSTONE_S0_CD_IRQ     MAINSTONE_IRQ(9)
      |                                 ^~~~~~~~~~~~~
arch/arm/mach-pxa/mainstone.c:506:15: note: in expansion of macro 'MAINSTONE_S0_CD_IRQ'
  506 |         [5] = MAINSTONE_S0_CD_IRQ,
      |               ^~~~~~~~~~~~~~~~~~~

Rework the initializer to list each element explicitly and only once.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210323130849.2362001-1-arnd@kernel.org

'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The clang integrated assembler fails to build one file with
a complex asm instruction:

arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: error: invalid instruction, any one of the following would fix this:
 mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit
 ^
arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: note: instruction requires: armv6t2
 mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit
 ^
arch/arm/mach-omap1/ams-delta-fiq-handler.S:249:2: note: instruction requires: thumb2
 mov r10, #(1 << (((NR_IRQS_LEGACY + 12) - NR_IRQS_LEGACY) % 32)) @ set deferred_fiq bit
 ^

The problem is that 'NR_IRQS_LEGACY' is not defined here. Apparently
gas does not care because we first add and then subtract this number,
leading to the immediate value to be the same regardless of the
specific definition of NR_IRQS_LEGACY.

Neither the way that 'gas' just silently builds this file, nor the
way that clang IAS makes nonsensical suggestions for how to fix it
is great. Fortunately there is an easy fix, which is to #include
the header that contains the definition.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210308153430.2530616-1-arnd@kernel.org

'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

When building with W=1, gcc points out that the __packed attribute
on struct qm_eqcr_entry conflicts with the 8-byte alignment
attribute on struct qm_fd inside it:

drivers/soc/fsl/qbman/qman.c:189:1: error: alignment 1 of 'struct qm_eqcr_entry' is less than 8 [-Werror=packed-not-aligned]

I assume that the alignment attribute is the correct one, and
that qm_eqcr_entry cannot actually be unaligned in memory,
so add the same alignment on the outer struct.

Fixes: c535e923

 ("soc/fsl: Introduce DPAA 1.x QMan device driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210323131530.2619900-1-arnd@kernel.org

'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

clang warns about an impossible condition when building with 32-bit
phys_addr_t:

arch/arm/mach-keystone/keystone.c:79:16: error: result of comparison of constant 51539607551 with expression of type 'phys_addr_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
            mem_end   > KEYSTONE_HIGH_PHYS_END) {
            ~~~~~~~   ^ ~~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-keystone/keystone.c:78:16: error: result of comparison of constant 34359738368 with expression of type 'phys_addr_t' (aka 'unsigned int') is always true [-Werror,-Wtautological-constant-out-of-range-compare]
        if (mem_start < KEYSTONE_HIGH_PHYS_START ||
            ~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~

Change the temporary variable to a fixed-size u64 to avoid the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Link: https://lore.kernel.org/r/20210323131814.2751750-1-arnd@kernel.org

'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-fixes-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.12, round 2:

- Fix a system failure on imx6qdl-phytec-pfla02 board when booting from
  SD, by adding missing vmmc supply for SD interfaces.
- Fix address typo in i.MX8MM/Q IOMUXC_SD1_DATA0_GPIO2_IO2 definition.

* tag 'imx-fixes-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces
  arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0

Link: https://lore.kernel.org/r/20210330090236.GQ22955@dragon


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v5.12/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

More fixes for omaps for v5.12-rc cycle

Two fixes for hangs, mmc slot order fix, and a voltage typo fix:

- Remove unused duplicate sha2md5_fck clock node that can race with the
  OMAP4_SHA2MD5_CLKCTRL clock node for disable for unused clocks

- Add aliases for omap4/5 mmc to put the slots back into the right
  order again

- Fix typo for bionic voltage controllers that accidentally use mpu
  for all instances instead of mpu, core and iva

- Fix random hangs for droid4 caused by missing fix from TI Android
  kernel tree to do a dummy smc call on cpuidle wakeup path

* tag 'omap-for-v5.12/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP4: PM: update ROM return address for OSWR and OFF
  ARM: OMAP4: Fix PMIC voltage domains for bionic
  ARM: dts: Fix moving mmc devices with aliases for omap4 & 5
  ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race

Link: https://lore.kernel.org/r/pull-1616584662-702939@atomide.com


Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'arm-soc/for-5.12/devicetree-part2' of https://github.com/Broadcom/stblinux into arm/fixes

This pull request contains Broadcom ARM-based SoC changes for 5.12,
please pull the following:

- Florian reverts the adding of the second level interrupt controller
  for HDMI BSC interrupts since they collide with the main I2C
  controller (i2c-bcm2835).

* tag 'arm-soc/for-5.12/devicetree-part2' of https://github.com/Broadcom/stblinux

:
  Revert "ARM: dts: bcm2711: Add the BSC interrupt controller"

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Setting the vmmc supplies is crucial since otherwise the supplying
regulators get disabled and the SD interfaces are no longer powered
which leads to system failures if the system is booted from that SD
interface.

Fixes: 1e44d3f8

 ("ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module")
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Fix address of the pad control register
(IOMUXC_SW_PAD_CTL_PAD_SD1_DATA0) for SD1_DATA0_GPIO2_IO2.  This seems
to be a typo but it leads to an exception when pinctrl is applied due to
wrong memory address access.

Signed-off-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Fixes: c1c9d413 ("dt-bindings: imx: Add pinctrl binding doc for imx8mm")
Fixes: 748f908c

 ("arm64: add basic DTS for i.MX8MQ")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Merge tag 'perf-tools-fixes-for-v5.12-2020-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tooling fixes from Arnaldo Carvalho de Melo:

 - Avoid write of uninitialized memory when generating PERF_RECORD_MMAP*
   records.

 - Fix 'perf top' BPF support related crash with perf_event_paranoid=3 +
   kptr_restrict.

 - Validate raw event with sysfs exported format bits.

 - Fix waipid on SIGCHLD delivery bugs in 'perf daemon'.

 - Change to use bash for daemon test on Debian, where the default is
   dash and thus fails for use of bashisms in this test.

 - Fix memory leak in vDSO found using ASAN.

 - Remove now useless (due to the fact that BPF now supports static
   vars) failing sub test "BPF relocation checker".

 - Fix auxtrace queue conflict.

 - Sync linux/kvm.h with the kernel sources.

* tag 'perf-tools-fixes-for-v5.12-2020-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf test: Change to use bash for daemon test
  perf record: Fix memory leak in vDSO found using ASAN
  perf test: Remove now useless failing sub test "BPF relocation checker"
  perf daemon: Return from kill functions
  perf daemon: Force waipid for all session on SIGCHLD delivery
  perf top: Fix BPF support related crash with perf_event_paranoid=3 + kptr_restrict
  perf pmu: Validate raw event with sysfs exported format bits
  perf synthetic events: Avoid write of uninitialized memory when generating PERF_RECORD_MMAP* records
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  perf synthetic-events: Fix uninitialized 'kernel_thread' variable
  perf auxtrace: Fix auxtrace queue conflict

Pull auxdisplay fix from Miguel Ojeda:
 "Remove in_interrupt() usage (Sebastian Andrzej Siewior)"

* tag 'auxdisplay-for-linus-v5.12-rc6' of git://github.com/ojeda/linux:
  auxdisplay: Remove in_interrupt() usage.

Pull x86 fixes from Ingo Molnar:
 "Two fixes:

   - Fix build failure on Ubuntu with new GCC packages that turn
     on -fcf-protection

   - Fix SME memory encryption PTE encoding bug - AFAICT the code
     worked on 4K page sizes (level 1) but had the wrong shift at
     higher page level orders (level 2 and higher)"

* tag 'x86-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Turn off -fcf-protection for realmode targets
  x86/mem_encrypt: Correct physical address calculation in __set_clr_pte_enc()

Pull locking fix from Ingo Molnar:
 "Fix the non-debug mutex_lock_io_nested() method to map to
  mutex_lock_io() instead of mutex_lock().

  Right now nothing uses this API explicitly, but this is an
  accident waiting to happen"

* tag 'locking-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/mutex: Fix non debug version of mutex_lock_io_nested()

Pull cifs fixes from Steve French:
 "Five cifs/smb3 fixes, two for stable.

  Includes an important fix for encryption and an ACL fix, as well as a
  fix for possible reflink data corruption"

* tag '5.12-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: fix cached file size problems in duplicate extents (reflink)
  cifs: Silently ignore unknown oplock break handle
  cifs: revalidate mapping when we open files for SMB1 POSIX
  cifs: Fix chmod with modefromsid when an older ACE already exists.
  cifs: Adjust key sizes and key generation routines for AES256 encryption

Pull io_uring fixes from Jens Axboe:

 - Use thread info versions of flag testing, as discussed last week.

 - The series enabling PF_IO_WORKER to just take signals, instead of
   needing to special case that they do not in a bunch of places. Ends
   up being pretty trivial to do, and then we can revert all the special
   casing we're currently doing.

 - Kill dead pointer assignment

 - Fix hashed part of async work queue trace

 - Fix sign extension issue for IORING_OP_PROVIDE_BUFFERS

 - Fix a link completion ordering regression in this merge window

 - Cancellation fixes

* tag 'io_uring-5.12-2021-03-27' of git://git.kernel.dk/linux-block:
  io_uring: remove unsued assignment to pointer io
  io_uring: don't cancel extra on files match
  io_uring: don't cancel-track common timeouts
  io_uring: do post-completion chore on t-out cancel
  io_uring: fix timeout cancel return code
  Revert "signal: don't allow STOP on PF_IO_WORKER threads"
  Revert "kernel: freezer should treat PF_IO_WORKER like PF_KTHREAD for freezing"
  Revert "kernel: treat PF_IO_WORKER like PF_KTHREAD for ptrace/signals"
  Revert "signal: don't allow sending any signals to PF_IO_WORKER threads"
  kernel: stop masking signals in create_io_thread()
  io_uring: handle signals for IO threads like a normal thread
  kernel: don't call do_exit() for PF_IO_WORKER threads
  io_uring: maintain CQE order of a failed link
  io-wq: fix race around pending work on teardown
  io_uring: do ctx sqd ejection in a clear context
  io_uring: fix provide_buffers sign extension
  io_uring: don't skip file_end_write() on reissue
  io_uring: correct io_queue_async_work() traces
  io_uring: don't use {test,clear}_tsk_thread_flag() for current

Pull block fixes from Jens Axboe:

 - Fix regression from this merge window with the xarray partition
   change, which allowed partition counts that overflow the u8 that
   holds the partition number (Ming)

 - Fix zone append warning (Johannes)

 - Segmentation count fix for multipage bvecs (David)

 - Partition scan fix (Chris)

* tag 'block-5.12-2021-03-27' of git://git.kernel.dk/linux-block:
  block: don't create too many partitions
  block: support zone append bvecs
  block: recalculate segment count for multi-segment discards correctly
  block: clear GD_NEED_PART_SCAN later in bdev_disk_changed

Pull SCSI fixes from James Bottomley:
 "Seven fixes, all in drivers (qla2xxx, mkt3sas, qedi, target,
  ibmvscsi).

  The most serious are the target pscsi oom and the qla2xxx revert which
  can otherwise cause a use after free"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: target: pscsi: Clean up after failure in pscsi_map_sg()
  scsi: target: pscsi: Avoid OOM in pscsi_map_sg()
  scsi: mpt3sas: Fix error return code of mpt3sas_base_attach()
  scsi: qedi: Fix error return code of qedi_alloc_global_queues()
  scsi: Revert "qla2xxx: Make sure that aborted commands are freed"
  scsi: ibmvfc: Make ibmvfc_wait_for_ops() MQ aware
  scsi: ibmvfc: Fix potential race in ibmvfc_wait_for_ops()

There is an assignment to io that is never read after the assignment,
the assignment is redundant and can be removed.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

As tasks always wait and kill their io-wq on exec/exit, files are of no
more concern to us, so we don't need to specifically cancel them by hand
in those cases. Moreover we should not, because io_match_task() looks at
req->task->files now, which is always true and so leads to extra
cancellations, that wasn't a case before per-task io-wq.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0566c1de9b9dd417f5de345c817ca953580e0e2e.1616696997.git.asml.silence@gmail.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

Don't account usual timeouts (i.e. not linked) as REQ_F_INFLIGHT but
keep behaviour prior to dd59a3d5

 ("io_uring: reliably cancel linked
timeouts").

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/104441ef5d97e3932113d44501fda0df88656b83.1616696997.git.asml.silence@gmail.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

Don't forget about io_commit_cqring() + io_cqring_ev_posted() after
exit/exec cancelling timeouts. Both functions declared only after
io_kill_timeouts(), so to avoid tons of forward declarations move
it down.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/72ace588772c0f14834a6a4185d56c445a366fb4.1616696997.git.asml.silence@gmail.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

When we cancel a timeout we should emit a sensible return code, like
-ECANCELED but not 0, otherwise it may trick users.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7b0ad1065e3bd1994722702bd0ba9e7bc9b0683b.1616696997.git.asml.silence@gmail.com


Signed-off-by: Jens Axboe <axboe@kernel.dk>

This reverts commit 4db4b1a0

.

The IO threads allow and handle SIGSTOP now, so don't special case them
anymore in task_set_jobctl_pending().

Signed-off-by: Jens Axboe <axboe@kernel.dk>

This reverts commit 15b2219f

.

Before IO threads accepted signals, the freezer using take signals to wake
up an IO thread would cause them to loop without any way to clear the
pending signal. That is no longer the case, so stop special casing
PF_IO_WORKER in the freezer.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

This reverts commit 6fb8f43c

.

The IO threads do allow signals now, including SIGSTOP, and we can allow
ptrace attach. Attaching won't reveal anything interesting for the IO
threads, but it will allow eg gdb to attach to a task with io_urings
and IO threads without complaining. And once attached, it will allow
the usual introspection into regular threads.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

This reverts commit 5be28c8f

.

IO threads now take signals just fine, so there's no reason to limit them
specifically. Revert the change that prevented that from happening.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

This is racy - move the blocking into when the task is created and
we're marking it as PF_IO_WORKER anyway. The IO threads are now
prepared to handle signals like SIGSTOP as well, so clear that from
the mask to allow proper stopping of IO threads.

Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We go through various hoops to disallow signals for the IO threads, but
there's really no reason why we cannot just allow them. The IO threads
never return to userspace like a normal thread, and hence don't go through
normal signal processing. Instead, just check for a pending signal as part
of the work loop, and call get_signal() to handle it for us if anything
is pending.

With that, we can support receiving signals, including special ones like
SIGSTOP.

Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Commit a33df75c

 ("block: use an xarray for disk->part_tbl") drops the
check on max supported number of partitionsr, and allows partition with
bigger partition numbers to be added. However, ->bd_partno is defined as
u8, so partition index of xarray table may not match with ->bd_partno.
Then delete_partition() may delete one unmatched partition, and caused
use-after-free.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reported-by:  <syzbot+8fede7e30c7cee0de139@syzkaller.appspotmail.com>
Fixes: a33df75c

 ("block: use an xarray for disk->part_tbl")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There were two problems (one of which could cause data corruption)
that were noticed with duplicate extents (ie reflink)
when debugging why various xfstests were being incorrectly skipped
(e.g. generic/138, generic/140, generic/142). First, we were not
updating the file size locally in the cache when extending a
file due to reflink (it would refresh after actimeo expires)
but xfstest was checking the size immediately which was still
0 so caused the test to be skipped.  Second, we were setting
the target file size (which could shrink the file) in all cases
to the end of the reflinked range rather than only setting the
target file size when reflink would extend the file.

CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Make SMB2 not print out an error when an oplock break is received for an
unknown handle, similar to SMB1.  The debug message which is printed for
these unknown handles may also be misleading, so fix that too.

The SMB2 lease break path is not affected by this patch.

Without this, a program which writes to a file from one thread, and
opens, reads, and writes the same file from another thread triggers the
below errors several times a minute when run against a Samba server
configured with "smb2 leases = no".

 CIFS: VFS: \\192.168.0.1 No task to wake, unknown frame received! NumMids 2
 00000000: 424d53fe 00000040 00000000 00000012  .SMB@...........
 00000010: 00000001 00000000 ffffffff ffffffff  ................
 00000020: 00000000 00000000 00000000 00000000  ................
 00000030: 00000000 00000000 00000000 00000000  ................

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

RHBZ: 1933527

Under SMB1 + POSIX, if an inode is reused on a server after we have read and
cached a part of a file, when we then open the new file with the
re-cycled inode there is a chance that we may serve the old data out of cache
to the application.
This only happens for SMB1 (deprecated) and when posix are used.
The simplest solution to avoid this race is to force a revalidate
on smb1-posix open.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

My recent fixes to cifsacl to maintain inherited ACEs had
regressed modefromsid when an older ACL already exists.

Found testing xfstest 495 with modefromsid mount option

Fixes: f5065508

 ("cifs: Retain old ACEs when converting between mode bits and ACL")

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

Right now we're never calling get_signal() from PF_IO_WORKER threads, but
in preparation for doing so, don't handle a fatal signal for them. The
workers have state they need to cleanup when exiting, so just return
instead of calling do_exit() on their behalf. The threads themselves will
detect a fatal signal and do proper shutdown.

Signed-off-by: Jens Axboe <axboe@kernel.dk>