- Nov 20, 2017
-
-
Kai-Heng Feng authored
Users have been using knob "model=dell-headset-multi" on Intel Skull Canyon for a while. Add the equivalent quirk, ALC269_FIXUP_DELL1_MIC_NO_PRESENCE for Skull Canyon. BugLink: https://bugs.launchpad.net/bugs/1732034 Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- Nov 17, 2017
-
-
Takashi Iwai authored
We got a regression report about the HD-audio HDMI chmap, where some surround channels are reported as UNKNOWN. The git bisection pointed the culprit at the commit 9b3dc8aa ("ALSA: hda - Register chmap obj as priv data instead of codec"). The story behind scene is like this: - While moving the code out of the legacy HDA to the HDA common place, the patch modifies the code to obtain the chmap array indirectly in a byte array, and it expands it to kctl value array. - At the latter operation, the size of the array is wrongly passed by sizeof() to the pointer. - It can be 4 on 32bit arch, thus too short for 6+ channels. (And that's the reason why it didn't hit other persons; it's 8 on 64bit arch, thus it's usually enough.) The code was further changed meanwhile, but the problem persisted. Let's fix it by correctly evaluating the array size. Fixes: 9b3dc8aa ("ALSA: hda - Register chmap obj as priv data instead of codec") Reported-by:
VDR User <user.vdr@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Julian Scheel authored
When an interrupt occurs, the value of at least one of the belonging controls should have changed. To make sure they get re-read from device on the next read, invalidate the cache. This was correctly implemented for uac2 already, but missing for uac1. Signed-off-by:
Julian Scheel <julian@jusst.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- Nov 16, 2017
-
-
Kailang Yang authored
Sound works after a cold boot but not after a reboot from windows. This patch will solve this issue. This is relation with Class-D power control. [ The bug was reported in Bugzilla below for Sony VAIO SVS13A1C5E -- tiwai] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197737 Cc: <stable@vger.kernel.org> Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Merge tag 'asoc-fix-v4.14-intel-kconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fix for Intel Kconfig Fix the Intel Kconfig issue reported by Linus.
-
- Nov 15, 2017
-
-
Vinod Koul authored
Symbol SND_SOC_INTEL_SST_TOPLEVEL is user selectable so add the help text for this symbol. Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Nov 14, 2017
-
-
Chris Gorman authored
Fixed reference to file HD-Audio-Models.rst which has been moved to hd-audio/models.rst Signed-off-by:
Chris Gorman <chrisjohgorman@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- Nov 13, 2017
-
-
Takashi Iwai authored
Merge tag 'asoc-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.15 The biggest thing this release has been the conversion of the AC98 bus to the driver model, that's been a long time coming so thanks to Robert Jarzmik for his dedication there. Due to there being some AC97 MFD there's a few fairly large changes in input and the MFD layer, mainly to the wm97xx driver. There's also some drivers/drm changes to support the new AMD Stoney platform, these are shared with the DRM subsystem and should be being merged via both. Within the subsystem the overwhelming bulk of the changes is in the Intel drivers which continue to need lots of cleanups and fixes, this release they've also gained support for their open source firmware. There's also some large changs in the core as Morimoto-san continues to mirror operations into the component level in preparation for conversion of drivers to that. - The AC97 bus has finally caught up with the driver model ...
-
Takashi Iwai authored
Pull 4.15 updates to take over the previous urgent fixes. Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- Nov 11, 2017
-
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/tfa9879', 'asoc/topic/ts3a277e', 'asoc/topic/wm8741', 'asoc/topic/wm97xx' and 'asoc/topic/zte' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/samsung', 'asoc/topic/sgtl5000', 'asoc/topic/stm32', 'asoc/topic/sunxi' and 'asoc/topic/tas571x' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/rt5645', 'asoc/topic/rt5651', 'asoc/topic/rt5659', 'asoc/topic/rt5663' and 'asoc/topic/rt5670' into asoc-next
-
Mark Brown authored
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/max98925', 'asoc/topic/max98927', 'asoc/topic/msm8916' and 'asoc/topic/omap' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/hdmi', 'asoc/topic/img' and 'asoc/topic/kirkwood' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/dwc', 'asoc/topic/fallthrough', 'asoc/topic/fsi', 'asoc/topic/fsl' and 'asoc/topic/graph' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/cygnus', 'asoc/topic/da7213', 'asoc/topic/davinci' and 'asoc/topic/doc' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/bcm2835', 'asoc/topic/cs42l56' and 'asoc/topic/cs43130' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/ac97', 'asoc/topic/ac97-mfd', 'asoc/topic/amd' and 'asoc/topic/arizona-mfd' into asoc-next
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
ASoC: Fixes for v4.14 I've been quite lax in sending these due to conference season but here's a fairly large collection of ASoC updates. The one thing that's not device specific is Takashi's fix for races between delayed work and PCM destruction, otherwise everything is specific to an individual device. # gpg: Signature made Thu 26 Oct 2017 15:11:23 BST # gpg: using RSA key ADE668AA675718B59FE29FEA24D68B725D5487D0 # gpg: issuer "broonie@kernel.org" # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" [unknown] # gpg: aka "Mark Brown <broonie@debian.org>" [unknown] # gpg: aka "Mark Brown <broonie@kernel.org>" [unknown] # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" [unknown] # gpg: aka "Mark Brown <broonie@linaro.org>" [unknown] # gpg: aka "Mark Brown <Mark.Brown@linaro.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 3F25 68AA C269 98F9 E813 A1C5 C3F4 36CA 30F5 D8EB # Subkey fingerprint: ADE6 68AA 6757 18B5 9FE2 9FEA 24D6 8B72 5D54 87D0
-
Matthias Reichl authored
DSP modes and left/right justified modes can be supported on bcm2835 by configuring the frame sync polarity and frame sync length registers and by adjusting the channel data position registers. Clock and frame sync polarity handling in hw_params has been refactored to make the interaction between logical rising/falling edge frame start and physical configuration (changed by normal/inverted polarity modes) clearer. Modes where the first active data bit is transmitted immediately after frame start (eg DSP mode B with slot 0 active) only work reliable if bcm2835 is configured as frame master. In frame slave mode channel swap (or shift, this isn't quite clear yet) can occur. Currently the driver only warns if an unstable configuration is detected but doensn't prevent using them. Signed-off-by:
Matthias Reichl <hias@horus.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Matthias Reichl authored
bcm2835's configuration registers can't be changed when a stream is running, which means asymmetric configurations aren't supported. Channel and rate symmetry are already enforced by constraints but samplebits had been missed. As hw_params doesn't check for symmetry constraints by itself and just returns success if a stream is running this led to situations where asymmetric configurations were seeming to succeed but of course didn't work because the hardware wasn't configured at all. Fix this by adding the missing samplerate symmetry constraint. Signed-off-by:
Matthias Reichl <hias@horus.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Matthias Reichl authored
Sample rates are only restricted by the capabilities of the clock driver, so use SNDRV_PCM_RATE_CONTINUOUS instead of SNDRV_PCM_RATE_8000_192000. Tests (eg with pcm5122) have shown that bcm2835 works fine in 384kHz/32bit stereo mode, so change the maximum allowed rate from 192kHz to 384kHz. Signed-off-by:
Matthias Reichl <hias@horus.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Matthias Reichl authored
bcm2835 supports arbitrary positioning of channel data within a frame and thus is capable of supporting TDM modes. Since the driver is limited to 2-channel operations only TDM setups with exactly 2 active slots are supported. Logical TDM slot numbering follows the usual convention: For I2S-like modes, with a 50% duty-cycle frame clock, slots 0, 2, ... are transmitted in the first half of a frame, slots 1, 3, ... are transmitted in the second half. For DSP modes slot numbering is ascending: 0, 1, 2, 3, ... Channel position calculation has been refactored to use TDM info and moved out of hw_params. set_tdm_slot, set_bclk_ratio and hw_params now check more strictly if the configuration is valid. Illegal configurations like odd number of slots in I2S mode, data lengths exceeding slot width or frame sizes larger than the hardware limit of 1024 are rejected. Also hw_params now properly checks for errors from clk_set_rate. Allowed PCM formats are already guarded by stream constraints, thus the formats check in hw_params has been removed and data_length is now retrieved via params_width(). Also standard functions like snd_soc_params_to_bclk are now being used instead of manual calculations to make the code more readable. Special care has been taken to ensure that set_bclk_ratio works as before. The bclk ratio is mapped to a 2-channel TDM config with a slot width of half the ratio. In order to support odd ratios, which can't be expressed via a TDM config, the ratio (frame length) is stored and used by hw_params. Signed-off-by:
Matthias Reichl <hias@horus.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
Add mclk-fs support to audio graph card as it was previously implemented in simple card. Signed-off-by:
Olivier Moysan <olivier.moysan@st.com> Acked-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Olivier Moysan authored
Add mclk-fs support to audio graph card as initially supported in simple card. Signed-off-by:
Olivier Moysan <olivier.moysan@st.com> Acked-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Arnd Bergmann authored
The main rt5514 driver optionally calls into the SPI back-end to load the firmware. This causes a link error when one driver selects rt5514 as built-in and another driver selects rt5514-spi as a loadable module: sound/soc/codecs/rt5514.o: In function `rt5514_dsp_voice_wake_up_put': rt5514.c:(.text+0xac8): undefined reference to `rt5514_spi_burst_write' As a workaround, this adds another silent symbol, to force rt5514-spi to be built-in for that configuration. I'm not overly happy with that solution, but couldn't come up with anything better. Using 'IS_REACHABLE()' would break the case that relies on the loadable module, and all other ideas would result in more complexity. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Arnd Bergmann authored
The new functions are only used when CONFIG_PM is enabled, leading to a harmless warning: sound/soc/codecs/rt5514-spi.c:474:12: error: 'rt5514_resume' defined but not used [-Werror=unused-function] sound/soc/codecs/rt5514-spi.c:464:12: error: 'rt5514_suspend' defined but not used [-Werror=unused-function] This marks them as __maybe_unused to make the build silent again. Fixes: 58f1c07d ("ASoC: rt5514: Voice wakeup support.") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Nov 10, 2017
-
-
oder_chiou@realtek.com authored
Check the JD status in the button pushing to prevent the IRQ that is locked by button pushing event while the jack unpluging. Signed-off-by:
Oder Chiou <oder_chiou@realtek.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Vijendar Mukunda authored
Before rendering starts, DMA driver copies full buffer valid data to ACP SRAM for the first time, after that ACP SRAM to I2S FIFO DMA will be initiated. After rendering first half of ACP SRAM, IOC will be raised then Audio data will be copied from first half of System Memory to first half of ACP SRAM. Similarly after rendering second half of ACP SRAM, IOC will be raised then Audio Data will be copied from second half of the System Memory to second half of the ACP SRAM in ping-pong way till rendering stops. Old design introducing latency issues resulting stutter sound observed during playback. Signed-off-by:
Vijendar Mukunda <Vijendar.Mukunda@amd.com> Signed-off-by:
Akshu Agrawal <Akshu.Agrawal@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-