Drivers call netdev_set_num_tc() and then netdev_set_tc_queue()
to set the queue count and offset for each TC.  So the queue count
and offset for the TCs may be zero for a short period after dev->num_tc
has been set.  If a TX packet is being transmitted at this time in the
code path netdev_pick_tx() -> skb_tx_hash(), skb_tx_hash() may see
nonzero dev->num_tc but zero qcount for the TC.  The while loop that
keeps looping while hash >= qcount will not end.

Fix it by checking the TC's qcount to be nonzero before using it.

Fixes: eadec877

 ("net: Add support for subordinate traffic classes to netdev_pick_tx")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A hard hang is observed whenever the ethernet interface is brought
down. If the PHY is stopped before the LPC core block is reset,
the SoC will hang. Comparing lpc_eth_close() and lpc_eth_open() I
re-arranged the ordering of the functions calls in lpc_eth_close() to
reset the hardware before stopping the PHY.
Fixes: b7370112

 ("lpc32xx: Added ethernet driver")
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
ksettings_{get|set} lock fixes

Walter Stoll <Walter.Stoll@duagon.com> reported a race condition
between "ethtool -s eth0 speed 100 duplex full autoneg off" and phylib
reading the current status from the PHY. Both ksetting_get and
ksetting_set fail the take the phydev mutex, and as a result, there is
a small window of time where the phydev members are not self
consistent.

Patch 1 fixes phy_ethtool_ksettings_get by adding the needed lock.
Patches 2 and 3 move code around and perform to refactoring, to allow
patch 4 to fix phy_ethtool_ksettings_set by added the lock.

Thanks go to Walter for the detailed origional report, suggested fix,
and testing of the proposed patches.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

There is a race condition where the PHY state machine can change
members of the phydev structure at the same time userspace requests a
change via ethtool. To prevent this, have phy_ethtool_ksettings_set
take the PHY lock.

Fixes: 2d55173e

 ("phy: add generic function to support ksetting support")
Reported-by: Walter Stoll <Walter.Stoll@duagon.com>
Suggested-by: Walter Stoll <Walter.Stoll@duagon.com>
Tested-by: Walter Stoll <Walter.Stoll@duagon.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Split phy_start_aneg into a wrapper which takes the PHY lock, and a
helper doing the real work. This will be needed when
phy_ethtook_ksettings_set takes the lock.

Fixes: 2d55173e

 ("phy: add generic function to support ksetting support")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This allows it to make use of a helper which assume the PHY is already
locked.

Fixes: 2d55173e

 ("phy: add generic function to support ksetting support")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The PHY structure should be locked while copying information out if
it, otherwise there is no guarantee of self consistency. Without the
lock the PHY state machine could be updating the structure.

Fixes: 2d55173e

 ("phy: add generic function to support ksetting support")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The dma failure was reported in the raspberry pi github (issue #4117).
https://github.com/raspberrypi/linux/issues/4117
The use of dma_set_mask_and_coherent fixes the issue.
Tested on 32/64-bit raspberry pi CM4 and 64-bit ubuntu x86 PC with EVB-LAN7430.

Fixes: 23f0703c

 ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver needs to clean up and return when the initialization fails on resume.

Fixes: 23f0703c

 ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On my box I see a bunch of ping/nettest processes hanging
around after fcntal-test.sh is done.

Clean those up before netns deletion.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211021140247.29691-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Xin Long says:

====================
sctp: enhancements for the verification tag

This patchset is to address CVE-2021-3772:

  A flaw was found in the Linux SCTP stack. A blind attacker may be able to
  kill an existing SCTP association through invalid chunks if the attacker
  knows the IP-addresses and port numbers being used and the attacker can
  send packets with spoofed IP addresses.

This is caused by the missing VTAG verification for the received chunks
and the incorrect vtag for the ABORT used to reply to these invalid
chunks.

This patchset is to go over all processing functions for the received
chunks and do:

1. Make sure sctp_vtag_verify() is called firstly to verify the vtag from
   the received chunk and discard this chunk if it fails. With some
   exceptions:

   a. sctp_sf_do_5_1B_init()/5_2_2_dupinit()/9_2_reshutack(), processing
      INIT chunk, as sctphdr vtag is always 0 in INIT chunk.

   b. sctp_sf_do_5_2_4_dupcook(), processing dupicate COOKIE_ECHO chunk,
      as the vtag verification will be done by sctp_tietags_compare() and
      then it takes right actions according to the return.

   c. sctp_sf_shut_8_4_5(), processing SHUTDOWN_ACK chunk for cookie_wait
      and cookie_echoed state, as RFC demand sending a SHUTDOWN_COMPLETE
      even if the vtag verification failed.

   d. sctp_sf_ootb(), called in many types of chunks for closed state or
      no asoc, as the same reason to c.

2. Always use the vtag from the received INIT chunk to make the response
   ABORT in sctp_ootb_pkt_new().

3. Fix the order for some checks and add some missing checks for the
   received chunk.

This patch series has been tested with SCTP TAHI testing to make sure no
regression caused on protocol conformance.
====================

Link: https://lore.kernel.org/r/cover.1634730082.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sctp_sf_ootb() is called when processing DATA chunk in closed state,
and many other places are also using it.

The vtag in the chunk's sctphdr should be verified, otherwise, as
later in chunk length check, it may send abort with the existent
asoc's vtag, which can be exploited by one to cook a malicious
chunk to terminate a SCTP asoc.

When fails to verify the vtag from the chunk, this patch sets asoc
to NULL, so that the abort will be made with the vtag from the
received chunk later.

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sctp_sf_do_8_5_1_E_sa() is called when processing SHUTDOWN_ACK chunk
in cookie_wait and cookie_echoed state.

The vtag in the chunk's sctphdr should be verified, otherwise, as
later in chunk length check, it may send abort with the existent
asoc's vtag, which can be exploited by one to cook a malicious
chunk to terminate a SCTP asoc.

Note that when fails to verify the vtag from SHUTDOWN-ACK chunk,
SHUTDOWN COMPLETE message will still be sent back to peer, but
with the vtag from SHUTDOWN-ACK chunk, as said in 5) of
rfc4960#section-8.4.

While at it, also remove the unnecessary chunk length check from
sctp_sf_shut_8_4_5(), as it's already done in both places where
it calls sctp_sf_shut_8_4_5().

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sctp_sf_violation() is called when processing HEARTBEAT_ACK chunk
in cookie_wait state, and some other places are also using it.

The vtag in the chunk's sctphdr should be verified, otherwise, as
later in chunk length check, it may send abort with the existent
asoc's vtag, which can be exploited by one to cook a malicious
chunk to terminate a SCTP asoc.

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1. In closed state: in sctp_sf_do_5_1D_ce():

  When asoc is NULL, making packet for abort will use chunk's vtag
  in sctp_ootb_pkt_new(). But when asoc exists, vtag from the chunk
  should be verified before using peer.i.init_tag to make packet
  for abort in sctp_ootb_pkt_new(), and just discard it if vtag is
  not correct.

2. In the other states: in sctp_sf_do_5_2_4_dupcook():

  asoc always exists, but duplicate cookie_echo's vtag will be
  handled by sctp_tietags_compare() and then take actions, so before
  that we only verify the vtag for the abort sent for invalid chunk
  length.

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently INIT_ACK chunk in non-cookie_echoed state is processed in
sctp_sf_discard_chunk() to send an abort with the existent asoc's
vtag if the chunk length is not valid. But the vtag in the chunk's
sctphdr is not verified, which may be exploited by one to cook a
malicious chunk to terminal a SCTP asoc.

sctp_sf_discard_chunk() also is called in many other places to send
an abort, and most of those have this problem. This patch is to fix
it by sending abort with the existent asoc's vtag only if the vtag
from the chunk's sctphdr is verified in sctp_sf_discard_chunk().

Note on sctp_sf_do_9_1_abort() and sctp_sf_shutdown_pending_abort(),
the chunk length has been verified before sctp_sf_discard_chunk(),
so replace it with sctp_sf_discard(). On sctp_sf_do_asconf_ack() and
sctp_sf_do_asconf(), move the sctp_chunk_length_valid check ahead of
sctp_sf_discard_chunk(), then replace it with sctp_sf_discard().

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch fixes the problems below:

1. In non-shutdown_ack_sent states: in sctp_sf_do_5_1B_init() and
   sctp_sf_do_5_2_2_dupinit():

  chunk length check should be done before any checks that may cause
  to send abort, as making packet for abort will access the init_tag
  from init_hdr in sctp_ootb_pkt_new().

2. In shutdown_ack_sent state: in sctp_sf_do_9_2_reshutack():

  The same checks as does in sctp_sf_do_5_2_2_dupinit() is needed
  for sctp_sf_do_9_2_reshutack().

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently Linux SCTP uses the verification tag of the existing SCTP
asoc when failing to process and sending the packet with the ABORT
chunk. This will result in the peer accepting the ABORT chunk and
removing the SCTP asoc. One could exploit this to terminate a SCTP
asoc.

This patch is to fix it by always using the initiate tag of the
received INIT chunk for the ABORT chunk to be sent.

Fixes: 1da177e4

 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Christoph Paasch reports [1] about incorrect skb->truesize
after skb_expand_head() call in ip6_xmit.
This may happen because of two reasons:
- skb_set_owner_w() for newly cloned skb is called too early,
before pskb_expand_head() where truesize is adjusted for (!skb-sk) case.
- pskb_expand_head() does not adjust truesize in (skb->sk) case.
In this case sk->sk_wmem_alloc should be adjusted too.

[1] https://lkml.org/lkml/2021/8/20/1082

Fixes: f1260ff1 ("skbuff: introduce skb_expand_head()")
Fixes: 2d85a1b3

 ("ipv6: ip6_finish_output2: set sk into newly allocated nskb")
Reported-by: Christoph Paasch <christoph.paasch@gmail.com>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/644330dd-477e-0462-83bf-9f514c41edd1@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'mac80211-for-net-2021-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Two small fixes:
 * RCU misuse in scan processing in cfg80211
 * missing size check for HE data in mac80211 mesh

* tag 'mac80211-for-net-2021-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
  cfg80211: scan: fix RCU in cfg80211_add_nontrans_list()
  mac80211: mesh: fix HE operation element length check
====================

Link: https://lore.kernel.org/r/20211021154351.134297-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull drm fixes from Dave Airlie:
 "Nothing too crazy at the end of the cycle, the kmb modesetting fixes
  are probably a bit large but it's not a major driver, and its fixing
  monitor doesn't turn on type problems.

  Otherwise it's just a few minor patches, one ast regression revert, an
  msm power stability fix.

  ast:
   - fix regression with connector detect

  msm:
   - fix power stability issue

  msxfb:
   - fix crash on unload

  panel:
   - sync fix

  kmb:
   - modesetting fixes"

* tag 'drm-fixes-2021-10-22' of git://anongit.freedesktop.org/drm/drm:
  Revert "drm/ast: Add detect function support"
  drm/kmb: Enable ADV bridge after modeset
  drm/kmb: Corrected typo in handle_lcd_irq
  drm/kmb: Disable change of plane parameters
  drm/kmb: Remove clearing DPHY regs
  drm/kmb: Limit supported mode to 1080p
  drm/kmb: Work around for higher system clock
  drm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panel
  drm: mxsfb: Fix NULL pointer dereference crash on unload
  drm/msm/devfreq: Restrict idle clamping to a618 for now

Vladimir Zapolskiy reports:

Commit a7259df7 ("memblock: make memblock_find_in_range method
private") invokes a kernel panic while running kmemleak on OF platforms
with nomaped regions:

  Unable to handle kernel paging request at virtual address fff000021e00000
  [...]
    scan_block+0x64/0x170
    scan_gray_list+0xe8/0x17c
    kmemleak_scan+0x270/0x514
    kmemleak_write+0x34c/0x4ac

The memory allocated from memblock is registered with kmemleak, but if
it is marked MEMBLOCK_NOMAP it won't have linear map entries so an
attempt to scan such areas will fault.

Ideally, memblock_mark_nomap() would inform kmemleak to ignore
MEMBLOCK_NOMAP memory, but it can be called before kmemleak interfaces
operating on physical addresses can use __va() conversion.

Make sure that functions that mark allocated memory as MEMBLOCK_NOMAP
take care of informing kmemleak to ignore such memory.

Link: https://lore.kernel.org/all/8ade5174-b143-d621-8c8e-dc6a1898c6fb@linaro.org
Link: https://lore.kernel.org/all/c30ff0a2-d196-c50d-22f0-bd50696b1205@quicinc.com
Fixes: a7259df7

 ("memblock: make memblock_find_in_range method private")
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 6e44bd6d ("memblock: exclude NOMAP regions from kmemleak")
breaks boot on EFI systems with kmemleak and VM_DEBUG enabled:

  efi: Processing EFI memory map:
  efi:   0x000090000000-0x000091ffffff [Conventional|   |  |  |  |  |  |  |  |  |   |WB|WT|WC|UC]
  efi:   0x000092000000-0x0000928fffff [Runtime Data|RUN|  |  |  |  |  |  |  |  |   |WB|WT|WC|UC]
  ------------[ cut here ]------------
  kernel BUG at mm/kmemleak.c:1140!
  Internal error: Oops - BUG: 0 [#1] SMP
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc6-next-20211019+ #104
  pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc : kmemleak_free_part_phys+0x64/0x8c
  lr : kmemleak_free_part_phys+0x38/0x8c
  sp : ffff800011eafbc0
  x29: ffff800011eafbc0 x28: 1fffff7fffb41c0d x27: fffffbfffda0e068
  x26: 0000000092000000 x25: 1ffff000023d5f94 x24: ffff800011ed84d0
  x23: ffff800011ed84c0 x22: ffff800011ed83d8 x21: 0000000000900000
  x20: ffff800011782000 x19: 0000000092000000 x18: ffff800011ee0730
  x17: 0000000000000000 x16: 0000000000000000 x15: 1ffff0000233252c
  x14: ffff800019a905a0 x13: 0000000000000001 x12: ffff7000023d5ed7
  x11: 1ffff000023d5ed6 x10: ffff7000023d5ed6 x9 : dfff800000000000
  x8 : ffff800011eaf6b7 x7 : 0000000000000001 x6 : ffff800011eaf6b0
  x5 : 00008ffffdc2a12a x4 : ffff7000023d5ed7 x3 : 1ffff000023dbf99
  x2 : 1ffff000022f0463 x1 : 0000000000000000 x0 : ffffffffffffffff
  Call trace:
   kmemleak_free_part_phys+0x64/0x8c
   memblock_mark_nomap+0x5c/0x78
   reserve_regions+0x294/0x33c
   efi_init+0x2d0/0x490
   setup_arch+0x80/0x138
   start_kernel+0xa0/0x3ec
   __primary_switched+0xc0/0xc8
  Code: 34000041 97d526e7 f9418e80 36000040 (d4210000)
  random: get_random_bytes called from print_oops_end_marker+0x34/0x80 with crng_init=0
  ---[ end trace 0000000000000000 ]---

The crash happens because kmemleak_free_part_phys() tries to use __va()
before memstart_addr is initialized and this triggers a VM_BUG_ON() in
arch/arm64/include/asm/memory.h:

Revert 6e44bd6d

 ("memblock: exclude NOMAP regions from kmemleak"),
the issue it is fixing will be fixed differently.

Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'ucount-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ucounts fixes from Eric Biederman:
 "There has been one very hard to track down bug in the ucount code that
  we have been tracking since roughly v5.14 was released. Alex managed
  to find a reliable reproducer a few days ago and then I was able to
  instrument the code and figure out what the issue was.

  It turns out the sigqueue_alloc single atomic operation optimization
  did not play nicely with ucounts multiple level rlimits. It turned out
  that either sigqueue_alloc or sigqueue_free could be operating on
  multiple levels and trigger the conditions for the optimization on
  more than one level at the same time.

  To deal with that situation I have introduced inc_rlimit_get_ucounts
  and dec_rlimit_put_ucounts that just focuses on the optimization and
  the rlimit and ucount changes.

  While looking into the big bug I found I couple of other little issues
  so I am including those fixes here as well.

  When I have time I would very much like to dig into process ownership
  of the shared signal queue and see if we could pick a single owner for
  the entire queue so that all of the rlimits can count to that owner.
  That should entirely remove the need to call get_ucounts and
  put_ucounts in sigqueue_alloc and sigqueue_free. It is difficult
  because Linux unlike POSIX supports setuid that works on a single
  thread"

* 'ucount-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ucounts: Move get_ucounts from cred_alloc_blank to key_change_session_keyring
  ucounts: Proper error handling in set_cred_ucounts
  ucounts: Pair inc_rlimit_ucounts with dec_rlimit_ucoutns in commit_creds
  ucounts: Fix signal ucount refcounting

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, and can.

  We'll have one more fix for a socket accounting regression, it's still
  getting polished. Otherwise things look fine.

  Current release - regressions:

   - revert "vrf: reset skb conntrack connection on VRF rcv", there are
     valid uses for previous behavior

   - can: m_can: fix iomap_read_fifo() and iomap_write_fifo()

  Current release - new code bugs:

   - mlx5: e-switch, return correct error code on group creation failure

  Previous releases - regressions:

   - sctp: fix transport encap_port update in sctp_vtag_verify

   - stmmac: fix E2E delay mechanism (in PTP timestamping)

  Previous releases - always broken:

   - netfilter: ip6t_rt: fix out-of-bounds read of ipv6_rt_hdr

   - netfilter: xt_IDLETIMER: fix out-of-bound read caused by lack of
     init

   - netfilter: ipvs: make global sysctl read-only in non-init netns

   - tcp: md5: fix selection between vrf and non-vrf keys

   - ipv6: count rx stats on the orig netdev when forwarding

   - bridge: mcast: use multicast_membership_interval for IGMPv3

   - can:
      - j1939: fix UAF for rx_kref of j1939_priv abort sessions on
        receiving bad messages

      - isotp: fix TX buffer concurrent access in isotp_sendmsg() fix
        return error on FC timeout on TX path

   - ice: fix re-init of RDMA Tx queues and crash if RDMA was not inited

   - hns3: schedule the polling again when allocation fails, prevent
     stalls

   - drivers: add missing of_node_put() when aborting
     for_each_available_child_of_node()

   - ptp: fix possible memory leak and UAF in ptp_clock_register()

   - e1000e: fix packet loss in burst mode on Tiger Lake and later

   - mlx5e: ipsec: fix more checksum offload issues"

* tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
  usbnet: sanity check for maxpacket
  net: enetc: make sure all traffic classes can send large frames
  net: enetc: fix ethtool counter name for PM0_TERR
  ptp: free 'vclock_index' in ptp_clock_release()
  sfc: Don't use netif_info before net_device setup
  sfc: Export fibre-specific supported link modes
  net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flags
  net/mlx5e: IPsec: Fix a misuse of the software parser's fields
  net/mlx5e: Fix vlan data lost during suspend flow
  net/mlx5: E-switch, Return correct error code on group creation failure
  net/mlx5: Lag, change multipath and bonding to be mutually exclusive
  ice: Add missing E810 device ids
  igc: Update I226_K device ID
  e1000e: Fix packet loss on Tiger Lake and later
  e1000e: Separate TGP board type from SPT
  ptp: Fix possible memory leak in ptp_clock_register()
  net: stmmac: Fix E2E delay mechanism
  nfc: st95hf: Make spi remove() callback return zero
  net: hns3: disable sriov before unload hclge layer
  net: hns3: fix vf reset workqueue cannot exit
  ...

Pull powerpc fixes from Michael Ellerman:

 - Fix a bug exposed by a previous fix, where running guests with
   certain SMT topologies could crash the host on Power8.

 - Fix atomic sleep warnings when re-onlining CPUs, when PREEMPT is
   enabled.

Thanks to Nathan Lynch, Srikar Dronamraju, and Valentin Schneider.

* tag 'powerpc-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/smp: do not decrement idle task preempt count in CPU offline
  powerpc/idle: Don't corrupt back chain when going idle

This reverts commit aae74ff9

,
since it prevents my AMD Milan system from booting, with:

[   27.189558] BUG: kernel NULL pointer dereference, address: 0000000000000000
[   27.197506] #PF: supervisor write access in kernel mode
[   27.203333] #PF: error_code(0x0002) - not-present page
[   27.209064] PGD 0 P4D 0
[   27.211885] Oops: 0002 [#1] PREEMPT SMP NOPTI
[   27.216744] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.0-rc6+ #15
[   27.223928] Hardware name: AMD Corporation ETHANOL_X/ETHANOL_X, BIOS RXM1006B 08/20/2021
[   27.232955] RIP: 0010:run_timer_softirq+0x38b/0x4a0
[   27.238397] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c
[   27.259350] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086
[   27.265176] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101
[   27.273134] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001
[   27.281084] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb
[   27.289043] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8
[   27.297002] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350
[   27.304961] FS:  0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000
[   27.313988] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   27.320396] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0
[   27.328346] PKRU: 55555554
[   27.331359] Call Trace:
[   27.334073]  <IRQ>
[   27.336314]  ? __queue_work+0x420/0x420
[   27.340589]  ? lapic_next_event+0x21/0x30
[   27.345060]  ? clockevents_program_event+0x8f/0xe0
[   27.350402]  __do_softirq+0xfb/0x2db
[   27.354388]  irq_exit_rcu+0x98/0xd0
[   27.358275]  sysvec_apic_timer_interrupt+0xac/0xd0
[   27.363620]  </IRQ>
[   27.365955]  asm_sysvec_apic_timer_interrupt+0x12/0x20
[   27.371685] RIP: 0010:cpuidle_enter_state+0xcc/0x390
[   27.377292] Code: 3d 01 79 0a 50 e8 44 ed 77 ff 49 89 c6 0f 1f 44 00 00 31 ff e8 f5 f8 77 ff 80 7d d7 00 0f 85 e6 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 ff 0f 88 17 01 00 00 49 63 c7 4c 2b 75 c8 48 8d 14 40 48 8d
[   27.398243] RSP: 0018:ffffffffb0e03dc8 EFLAGS: 00000246
[   27.404069] RAX: ffffa0c44de00000 RBX: 0000000000000001 RCX: 000000000000001f
[   27.412028] RDX: 0000000000000000 RSI: ffffffffb0bafc1f RDI: ffffffffb0bbdb81
[   27.419986] RBP: ffffffffb0e03e00 R08: 00000006549f8f3f R09: ffffffffb1065200
[   27.427935] R10: ffffa0c44de27ae4 R11: ffffa0c44de27ac4 R12: ffffa0c5634cb000
[   27.435894] R13: ffffffffb1065200 R14: 00000006549f8f3f R15: 0000000000000001
[   27.443854]  ? cpuidle_enter_state+0xbb/0x390
[   27.448712]  cpuidle_enter+0x2e/0x40
[   27.452695]  call_cpuidle+0x23/0x40
[   27.456584]  do_idle+0x1f0/0x270
[   27.460181]  cpu_startup_entry+0x20/0x30
[   27.464553]  rest_init+0xd4/0xe0
[   27.468149]  arch_call_rest_init+0xe/0x1b
[   27.472619]  start_kernel+0x6bc/0x6e2
[   27.476764]  x86_64_start_reservations+0x24/0x26
[   27.481912]  x86_64_start_kernel+0x75/0x79
[   27.486477]  secondary_startup_64_no_verify+0xb0/0xbb
[   27.492111] Modules linked in: kvm_amd(+) kvm ipmi_si(+) ipmi_devintf rapl wmi_bmof ipmi_msghandler input_leds ccp k10temp mac_hid sch_fq_codel msr ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear ast i2c_algo_bit drm_vram_helper drm_ttm_helper ttm drm_kms_helper crct10dif_pclmul crc32_pclmul ghash_clmulni_intel syscopyarea aesni_intel sysfillrect crypto_simd sysimgblt fb_sys_fops cryptd hid_generic cec nvme ahci usbhid drm e1000e nvme_core hid libahci i2c_piix4 wmi
[   27.551789] CR2: 0000000000000000
[   27.555482] ---[ end trace 897987dfe93dccc6 ]---
[   27.560630] RIP: 0010:run_timer_softirq+0x38b/0x4a0
[   27.566069] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c
[   27.587021] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086
[   27.592848] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101
[   27.600808] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001
[   27.608765] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb
[   27.616716] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8
[   27.624673] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350
[   27.632624] FS:  0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000
[   27.641650] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   27.648159] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0
[   27.656119] PKRU: 55555554
[   27.659133] Kernel panic - not syncing: Fatal exception in interrupt
[   29.030411] Shutting down cpus with NMI
[   29.034699] Kernel Offset: 0x2e600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[   29.046790] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Since unreliable, found by bisecting for KASAN's use-after-free in
enqueue_timer+0x4f/0x1e0, where the timer callback is called.

Reported-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Fixes: aae74ff9

 ("drm/ast: Add detect function support")
Link: https://lore.kernel.org/lkml/0f7871be-9ca6-5ae4-3a40-5db9a8fb2365@amd.com/
Cc: Ainux <ainux.wang@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: sterlingteng@gmail.com
Cc: chenhuacai@kernel.org
Cc: Chuck Lever III <chuck.lever@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jon Grimm <jon.grimm@amd.com>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021153006.92983-1-kim.phillips@amd.com

Merge tag 'drm-misc-fixes-2021-10-21-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

drm-misc-fixes for v5.15-rc7:
- Rebased, to remove vc4 patches.
- Fix mxsfb crash on unload.
- Use correct sync parameters for Feixin K101-IM2BYL02.
- Assorted kmb modeset/atomic fixes.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e66eaf89-b9b9-41f5-d0d2-dad7e59fabb5@linux.intel.com

One more fix for v5.15, to work around a power stability issue on a630
(and possibly others)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs1WPLthmd=ToDcEHm=u-7O38RAVJ2XwRoS8xPmC520vg@mail.gmail.com

maxpacket of 0 makes no sense and oopses as we need to divide
by it. Give up.

V2: fixed typo in log and stylistic issues

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by:  <syzbot+76bb1d34ffa0adc03baa@syzkaller.appspotmail.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211021122944.21816-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The enetc driver does not implement .ndo_change_mtu, instead it
configures the MAC register field PTC{Traffic Class}MSDUR[MAXSDU]
statically to a large value during probe time.

The driver used to configure only the max SDU for traffic class 0, and
that was fine while the driver could only use traffic class 0. But with
the introduction of mqprio, sending a large frame into any other TC than
0 is broken.

This patch fixes that by replicating per traffic class the static
configuration done in enetc_configure_port_mac().

Fixes: cbe9e835

 ("enetc: Enable TC offloading with mqprio")
Reported-by: Richie Pearn <richard.pearn@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: &lt;Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20211020173340.1089992-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There are two counters named "MAC tx frames", one of them is actually
incorrect. The correct name for that counter should be "MAC tx error
frames", which is symmetric to the existing "MAC rx error frames".

Fixes: 16eb4c85

 ("enetc: Add ethtool statistics")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: &lt;Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20211020165206.1069889-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

'vclock_index' is accessed from sysfs, it shouled be freed
in release function, so move it from ptp_clock_unregister()
to ptp_clock_release().

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use pci_info instead to avoid unnamed/uninitialized noise:

[197088.688729] sfc 0000:01:00.0: Solarflare NIC detected
[197088.690333] sfc 0000:01:00.0: Part Number : SFN5122F
[197088.729061] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no SR-IOV VFs probed
[197088.729071] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no PTP support

Inspired by fa44821a

 ("sfc: don't use netif_info et al before
net_device is registered") from Heiner Kallweit.

Signed-off-by: Erik Ekman <erik@kryo.se>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The 1/10GbaseT modes were set up for cards with SFP+ cages in
3497ed8c ("sfc: report supported link speeds on SFP connections").
10GbaseT was likely used since no 10G fibre mode existed.

The missing fibre modes for 1/10G were added to ethtool.h in 5711a982


("net: ethtool: add support for 1000BaseX and missing 10G link modes")
shortly thereafter.

The user guide available at https://support-nic.xilinx.com/wp/drivers
lists support for the following cable and transceiver types in section 2.9:
- QSFP28 100G Direct Attach Cables
- QSFP28 100G SR Optical Transceivers (with SR4 modules listed)
- SFP28 25G Direct Attach Cables
- SFP28 25G SR Optical Transceivers
- QSFP+ 40G Direct Attach Cables
- QSFP+ 40G Active Optical Cables
- QSFP+ 40G SR4 Optical Transceivers
- QSFP+ to SFP+ Breakout Direct Attach Cables
- QSFP+ to SFP+ Breakout Active Optical Cables
- SFP+ 10G Direct Attach Cables
- SFP+ 10G SR Optical Transceivers
- SFP+ 10G LR Optical Transceivers
- SFP 1000BASE‐T Transceivers
- 1G Optical Transceivers
(From user guide issue 28. Issue 16 which also includes older cards like
SFN5xxx/SFN6xxx has matching lists for 1/10/40G transceiver types.)

Regarding SFP+ 10GBASE‐T transceivers the latest guide says:
"Solarflare adapters do not support 10GBASE‐T transceiver modules."

Tested using SFN5122F-R7 (with 2 SFP+ ports). Supported link modes do not change
depending on module used (tested with 1000BASE-T, 1000BASE-BX10, 10GBASE-LR).
Before:

$ ethtool ext
Settings for ext:
	Supported ports: [ FIBRE ]
	Supported link modes:   1000baseT/Full
	                        10000baseT/Full
	Supported pause frame use: Symmetric Receive-only
	Supports auto-negotiation: No
	Supported FEC modes: Not reported
	Advertised link modes:  Not reported
	Advertised pause frame use: No
	Advertised auto-negotiation: No
	Advertised FEC modes: Not reported
	Link partner advertised link modes:  Not reported
	Link partner advertised pause frame use: No
	Link partner advertised auto-negotiation: No
	Link partner advertised FEC modes: Not reported
	Speed: 1000Mb/s
	Duplex: Full
	Auto-negotiation: off
	Port: FIBRE
	PHYAD: 255
	Transceiver: internal
        Current message level: 0x000020f7 (8439)
                               drv probe link ifdown ifup rx_err tx_err hw
	Link detected: yes

After:

$ ethtool ext
Settings for ext:
	Supported ports: [ FIBRE ]
	Supported link modes:   1000baseT/Full
	                        1000baseX/Full
	                        10000baseCR/Full
	                        10000baseSR/Full
	                        10000baseLR/Full
	Supported pause frame use: Symmetric Receive-only
	Supports auto-negotiation: No
	Supported FEC modes: Not reported
	Advertised link modes:  Not reported
	Advertised pause frame use: No
	Advertised auto-negotiation: No
	Advertised FEC modes: Not reported
	Link partner advertised link modes:  Not reported
	Link partner advertised pause frame use: No
	Link partner advertised auto-negotiation: No
	Link partner advertised FEC modes: Not reported
	Speed: 1000Mb/s
	Duplex: Full
	Auto-negotiation: off
	Port: FIBRE
	PHYAD: 255
	Transceiver: internal
	Supports Wake-on: g
	Wake-on: d
        Current message level: 0x000020f7 (8439)
                               drv probe link ifdown ifup rx_err tx_err hw
	Link detected: yes

Signed-off-by: Erik Ekman <erik@kryo.se>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains Netfilter fixes for net:

1) Crash due to missing initialization of timer data in
   xt_IDLETIMER, from Juhee Kang.

2) NF_CONNTRACK_SECMARK should be bool in Kconfig, from Vegard Nossum.

3) Skip netdev events on netns removal, from Florian Westphal.

4) Add testcase to show port shadowing via UDP, also from Florian.

5) Remove pr_debug() code in ip6t_rt, this fixes a crash due to
   unsafe access to non-linear skbuff, from Xin Long.

6) Make net/ipv4/vs/debug_level read-only from non-init netns,
   from Antoine Tenart.

7) Remove bogus invocation to bash in selftests/netfilter/nft_flowtable.sh
   also from Florian.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-fixes-2021-10-20
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-10-20

This series contains updates to e1000e, igc, and ice drivers.

Sasha fixes an issue with dropped packets on Tiger Lake platforms for
e1000e and corrects a device ID for igc.

Tony adds missing E810 device IDs for ice.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

On KMB, ADV bridge must be programmed and powered on prior to
MIPI DSI HW initialization.

v2: changed to atomic_bridge_chain_enable (Sam)

Fixes: 98521f4d

 ("drm/kmb: Mipi DSI part of the display driver")
Co-developed-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019230719.789958-1-anitha.chrisanthus@intel.com
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Check for Overflow bits for layer3 in the irq handler.

Fixes: 7f7b96a8

 ("drm/kmb: Add support for KeemBay Display")
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013233632.471892-5-anitha.chrisanthus@intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>