Skip to content
Commit ccce12ec authored by Borislav Petkov (AMD)'s avatar Borislav Petkov (AMD) Committed by Greg Kroah-Hartman
Browse files

x86/barrier: Do not serialize MSR accesses on AMD

commit 04c30245 upstream.

AMD does not have the requirement for a synchronization barrier when
acccessing a certain group of MSRs. Do not incur that unnecessary
penalty there.

There will be a CPUID bit which explicitly states that a MFENCE is not
needed. Once that bit is added to the APM, this will be extended with
it.

While at it, move to processor.h to avoid include hell. Untangling that
file properly is a matter for another day.

Some notes on the performance aspect of why this is relevant, courtesy
of Kishon VijayAbraham <Kishon.VijayAbraham@amd.com>:

On a AMD Zen4 system with 96 cores, a modified ipi-bench[1] on a VM
shows x2AVIC IPI rate is 3% to 4% lower than AVIC IPI rate. The
ipi-bench is modified so that the IPIs are sent between two vCPUs in the
same CCX. This also requires to pin the vCPU to a physical core to
prevent any latencies. This simulates the use case of pinning vCPUs to
the thread of a single CCX to avoid interrupt IPI latency.

In order to avoid run-to-run variance (for both x2AVIC and AVIC), the
below configurations are done:

  1) Disable Power States in BIOS (to prevent the system from going to
     lower power state)

  2) Run the system at fixed frequency 2500MHz (to prevent the system
     from increasing the frequency when the load is more)

With the above configuration:

*) Performance measured using ipi-bench for AVIC:
  Average Latency:  1124.98ns [Time to send IPI from one vCPU to another vCPU]

  Cumulative throughput: 42.6759M/s [Total number of IPIs sent in a second from
  				     48 vCPUs simultaneously]

*) Performance measured using ipi-bench for x2AVIC:
  Average Latency:  1172.42ns [Time to send IPI from one vCPU to another vCPU]

  Cumulative throughput: 40.9432M/s [Total number of IPIs sent in a second from
  				     48 vCPUs simultaneously]

From above, x2AVIC latency is ~4% more than AVIC. However, the expectation is
x2AVIC performance to be better or equivalent to AVIC. Upon analyzing
the perf captures, it is observed significant time is spent in
weak_wrmsr_fence() invoked by x2apic_send_IPI().

With the fix to skip weak_wrmsr_fence()

*) Performance measured using ipi-bench for x2AVIC:
  Average Latency:  1117.44ns [Time to send IPI from one vCPU to another vCPU]

  Cumulative throughput: 42.9608M/s [Total number of IPIs sent in a second from
  				     48 vCPUs simultaneously]

Comparing the performance of x2AVIC with and without the fix, it can be seen
the performance improves by ~4%.

Performance captured using an unmodified ipi-bench using the 'mesh-ipi' option
with and without weak_wrmsr_fence() on a Zen4 system also showed significant
performance improvement without weak_wrmsr_fence(). The 'mesh-ipi' option ignores
CCX or CCD and just picks random vCPU.

  Average throughput (10 iterations) with weak_wrmsr_fence(),
        Cumulative throughput: 4933374 IPI/s

  Average throughput (10 iterations) without weak_wrmsr_fence(),
        Cumulative throughput: 6355156 IPI/s

[1] https://github.com/bytedance/kvm-utils/tree/master/microbenchmark/ipi-bench



Signed-off-by: default avatarBorislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230622095212.20940-1-bp@alien8.de


Signed-off-by: default avatarKishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 438d1949
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment