net/mlx5: Fix a WARN upon a callback command failure
The below WARN [1] is reported once a callback command failed. As a callback runs under an interrupt context, needs to use the IRQ save/restore variant. [1] DEBUG_LOCKS_WARN_ON(lockdep_hardirq_context()) WARNING: CPU: 15 PID: 0 at kernel/locking/lockdep.c:4353 lockdep_hardirqs_on_prepare+0x11b/0x180 Modules linked in: vhost_net vhost tap mlx5_vfio_pci vfio_pci vfio_pci_core vfio_iommu_type1 vfio mlx5_vdpa vringh vhost_iotlb vdpa nfnetlink_cttimeout openvswitch nsh ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle xt_conntrackxt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core CPU: 15 PID: 0 Comm: swapper/15 Tainted: G W 6.7.0-rc4+ #1587 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:lockdep_hardirqs_on_prepare+0x11b/0x180 Code: 00 5b c3 c3 e8 e6 0d 58 00 85 c0 74 d6 8b 15 f0 c3 76 01 85 d2 75 cc 48 c7 c6 04 a5 3b 82 48 c7 c7 f1 e9 39 82 e8 95 12 f9 ff <0f> 0b 5b c3 e8 bc 0d 58 00 85 c0 74 ac 8b 3d c6 c3 76 01 85 ff 75 RSP: 0018:ffffc900003ecd18 EFLAGS: 00010086 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000027 RDX: 0000000000000000 RSI: ffff88885fbdb880 RDI: ffff88885fbdb888 RBP: 00000000ffffff87 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 284e4f5f4e524157 R12: 00000000002c9aa1 R13: ffff88810aace980 R14: ffff88810aace9b8 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff88885fbc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f731436f4c8 CR3: 000000010aae6001 CR4: 0000000000372eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? __warn+0x81/0x170 ? lockdep_hardirqs_on_prepare+0x11b/0x180 ? report_bug+0xf8/0x1c0 ? handle_bug+0x3f/0x70 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? lockdep_hardirqs_on_prepare+0x11b/0x180 ? lockdep_hardirqs_on_prepare+0x11b/0x180 trace_hardirqs_on+0x4a/0xa0 raw_spin_unlock_irq+0x24/0x30 cmd_status_err+0xc0/0x1a0 [mlx5_core] cmd_status_err+0x1a0/0x1a0 [mlx5_core] mlx5_cmd_exec_cb_handler+0x24/0x40 [mlx5_core] mlx5_cmd_comp_handler+0x129/0x4b0 [mlx5_core] cmd_comp_notifier+0x1a/0x20 [mlx5_core] notifier_call_chain+0x3e/0xe0 atomic_notifier_call_chain+0x5f/0x130 mlx5_eq_async_int+0xe7/0x200 [mlx5_core] notifier_call_chain+0x3e/0xe0 atomic_notifier_call_chain+0x5f/0x130 irq_int_handler+0x11/0x20 [mlx5_core] __handle_irq_event_percpu+0x99/0x220 ? tick_irq_enter+0x5d/0x80 handle_irq_event_percpu+0xf/0x40 handle_irq_event+0x3a/0x60 handle_edge_irq+0xa2/0x1c0 __common_interrupt+0x55/0x140 common_interrupt+0x7d/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:default_idle+0x13/0x20 Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 ea 08 25 01 85 c0 7e 07 0f 00 2d 7f b0 26 00 fb f4 <fa> c3 90 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 80 d0 02 00 RSP: 0018:ffffc9000010fec8 EFLAGS: 00000242 RAX: 0000000000000001 RBX: 000000000000000f RCX: 4000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff811c410c RBP: ffffffff829478c0 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ? do_idle+0x1ec/0x210 default_idle_call+0x6c/0x90 do_idle+0x1ec/0x210 cpu_startup_entry+0x26/0x30 start_secondary+0x11b/0x150 secondary_startup_64_no_verify+0x165/0x16b </TASK> irq event stamp: 833284 hardirqs last enabled at (833283): [<ffffffff811c410c>] do_idle+0x1ec/0x210 hardirqs last disabled at (833284): [<ffffffff81daf9ef>] common_interrupt+0xf/0xa0 softirqs last enabled at (833224): [<ffffffff81dc199f>] __do_softirq+0x2bf/0x40e softirqs last disabled at (833177): [<ffffffff81178ddf>] irq_exit_rcu+0x7f/0xa0 Fixes: 34f46ae0 ("net/mlx5: Add command failures data to debugfs") Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Please register or sign in to comment