drm/bridge: ti-sn65dsi86: If refclk, DP AUX can happen w/out pre-enable
Let's reorganize how we init and turn on the reference clock in the code to allow us to turn it on early (even before pre_enable()) so that we can read the EDID early. This is handy for eDP because: - We always assume that a panel is there. - Once we report that a panel is there we get asked to read the EDID. - Pre-enable isn't called until we know what pixel clock we want to use and we're ready to turn everything on. That's _after_ we get asked to read the EDID. NOTE: the above only works out OK if we "refclk" is provided. Though I don't have access to any hardware that uses ti-sn65dsi86 and _doesn't_ provide a "refclk", I believe that we'll have trouble reading the EDID at bootup in that case. Specifically I believe that if there's no "refclk" we need the MIPI source clock to be active before we can successfully read the EDID. My evidence here is that, in testing, I couldn't read the EDID until I turned on the DPPLL in the bridge chip and that the DPPLL needs the input clock to be active. Since this is hard to support, let's punt trying to handle this case if there's no "refclk". In that case we'll enable comms in pre_enable() like we always did. I don't believe there are any users of the ti-sn65dsi86 bridge chip that _don't_ use "refclk". The bridge chip is _very_ inflexible in that mode. The only time I've seen that mode used was for some really early prototype hardware that was thrown in the e-waste bin years ago when we realized how inflexible it was. Even if someone is using the bridge chip without the "refclk" they're in no worse shape than they were before the (fairly recent) commit 58074b08 ("drm/bridge: ti-sn65dsi86: Read EDID blob over DDC"). Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.13.Ie8cf556114953c6e7634564cc0d3ddbd103cb96c@changeid
Please register or sign in to comment