PCI: pciehp: Prevent deadlock on disconnect

This addresses deadlocks in these common cases in hierarchies containing
two switches:

  - All involved ports are runtime suspended and they are unplugged. This
    can happen easily if the drivers involved automatically enable runtime
    PM (xHCI for example does that).

  - System is suspended (e.g., closing the lid on a laptop) with a dock +
    something else connected, and the dock is unplugged while suspended.

These cases lead to the following deadlock:

  INFO: task irq/126-pciehp:198 blocked for more than 120 seconds.
  irq/126-pciehp  D    0   198      2 0x80000000
  Call Trace:
   schedule+0x2c/0x80
   schedule_timeout+0x246/0x350
   wait_for_completion+0xb7/0x140
   kthread_stop+0x49/0x110
   free_irq+0x32/0x70
   pcie_shutdown_notification+0x2f/0x50
   pciehp_remove+0x27/0x50
   pcie_port_remove_service+0x36/0x50
   device_release_driver+0x12/0x20
   bus_remove_device+0xec/0x160
   device_del+0x13b/0x350
   device_unregister+0x1a/0x60
   remove_iter+0x1e/0x30
   device_for_each_child+0x56/0x90
   pcie_port_device_remove+0x22/0x40
   pcie_portdrv_remove+0x20/0x60
   pci_device_remove+0x3e/0xc0
   device_release_driver_internal+0x18c/0x250
   device_release_driver+0x12/0x20
   pci_stop_bus_device+0x6f/0x90
   pci_stop_bus_device+0x31/0x90
   pci_stop_and_remove_bus_device+0x12/0x20
   pciehp_unconfigure_device+0x88/0x140
   pciehp_disable_slot+0x6a/0x110
   pciehp_handle_presence_or_link_change+0x263/0x400
   pciehp_ist+0x1c9/0x1d0
   irq_thread_fn+0x24/0x60
   irq_thread+0xeb/0x190
   kthread+0x120/0x140

  INFO: task irq/190-pciehp:2288 blocked for more than 120 seconds.
  irq/190-pciehp  D    0  2288      2 0x80000000
  Call Trace:
   __schedule+0x2a2/0x880
   schedule+0x2c/0x80
   schedule_preempt_disabled+0xe/0x10
   mutex_lock+0x2c/0x30
   pci_lock_rescan_remove+0x15/0x20
   pciehp_unconfigure_device+0x4d/0x140
   pciehp_disable_slot+0x6a/0x110
   pciehp_handle_presence_or_link_change+0x263/0x400
   pciehp_ist+0x1c9/0x1d0
   irq_thread_fn+0x24/0x60
   irq_thread+0xeb/0x190
   kthread+0x120/0x140

What happens here is that the whole hierarchy is runtime resumed and the
parent PCIe downstream port, which got the hot-remove event, starts
removing devices below it, taking pci_lock_rescan_remove() lock. When the
child PCIe port is runtime resumed it calls pciehp_check_presence() which
ends up calling pciehp_card_present() and pciehp_check_link_active().  Both
of these use pcie_capability_read_word(), which notices that the underlying
device is already gone and returns PCIBIOS_DEVICE_NOT_FOUND with the
capability value set to 0. When pciehp gets this value it thinks that its
child device is also hot-removed and schedules its IRQ thread to handle the
event.

The deadlock happens when the child's IRQ thread runs and tries to acquire
pci_lock_rescan_remove() which is already taken by the parent and the
parent waits for the child's IRQ thread to finish.

Prevent this from happening by checking the return value of
pcie_capability_read_word() and if it is PCIBIOS_DEVICE_NOT_FOUND stop
performing any hot-removal activities.

[bhelgaas: add common scenarios to commit log]
Link: https://lore.kernel.org/r/20191029170022.57528-2-mika.westerberg@linux.intel.com


Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>