net: ti: icssg_prueth: Add SW TX / RX Coalescing based on hrtimers

commit ac9a8e5f94ed5421e590363bc1d86b6982afab35 from
git://git.ti.com/ti-linux-kernel/ti-linux-kernel.git



commit dcb3fba6 upstream

Add SW IRQ coalescing based on hrtimers for RX and TX data path for ICSSG
driver, which can be enabled by ethtool commands:

- RX coalescing
  ethtool -C eth1 rx-usecs 50

- TX coalescing can be enabled per TX queue

  - by default enables coalescing for TX0
  ethtool -C eth1 tx-usecs 50
  - configure TX0
  ethtool -Q eth0 queue_mask 1 --coalesce tx-usecs 100
  - configure TX1
  ethtool -Q eth0 queue_mask 2 --coalesce tx-usecs 100
  - configure TX0 and TX1
  ethtool -Q eth0 queue_mask 3 --coalesce tx-usecs 100 --coalesce
tx-usecs 100

Minimum value for both rx-usecs and tx-usecs is 20us.

Compared to gro_flush_timeout and napi_defer_hard_irqs this patch allows
to enable IRQ coalescing for RX path separately.

Benchmarking numbers:
 ===============================================================
| Method                  | Tput_TX | CPU_TX | Tput_RX | CPU_RX |
| ==============================================================
| Default Driver           943 Mbps    31%      517 Mbps  38%   |
| IRQ Coalescing (Patch)   943 Mbps    28%      518 Mbps  25%   |
 ===============================================================

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Xulin Sun <xulin.sun@windriver.com>