mmc: rockchip_sdhci: Fix HS400 and HS400ES mode on RK3568

Adjust tap number for transmit clock, tap number and delay number for
strobe input to fix HS400 modes on RK3568.

New values have been picked from vendor kernel and u-boot and have
successfully been tested with rock-3a-rk3568_defconfig and

  CONFIG_MMC_HS200_SUPPORT=y
  CONFIG_MMC_HS400_SUPPORT=y
  CONFIG_MMC_HS400_ES_SUPPORT=y
  CONFIG_MMC_SPEED_MODE_SET=y

using the following command to switch mode and then read 512 MiB of data
from eMMC into memory,

  => mmc dev 0 0 <mode> && mmc info && mmc read 10000000 2000 10000

for each of the modes below.

  0 = MMC legacy
  1 = MMC High Speed (26MHz)
  3 = MMC High Speed (52MHz)
  4 = MMC DDR52 (52MHz)
  10 = HS200 (200MHz)
  11 = HS400 (200MHz)
  12 = HS400ES (200MHz)

Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>